arch/arm/mach-pxa/Kconfig

   1 if ARCH_PXA
   2
   3 menu "Intel PXA2xx/PXA3xx Implementations"
   4
   5 comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
   6
   7 config MACH_PXA27X_DT
   8         bool "Support PXA27x platforms from device tree"
   9         select POWER_SUPPLY
  10         select PXA27x
  11         select USE_OF
  12         help
  13           Include support for Marvell PXA27x based platforms using
  14           the device tree. Needn't select any other machine while
  15           MACH_PXA27X_DT is enabled.
  16
  17 config MACH_PXA3XX_DT
  18         bool "Support PXA3xx platforms from device tree"
  19         select CPU_PXA300
  20         select POWER_SUPPLY
  21         select PXA3xx
  22         select USE_OF
  23         help
  24           Include support for Marvell PXA3xx based platforms using
  25           the device tree. Needn't select any other machine while
  26           MACH_PXA3XX_DT is enabled.
  27
  28 config ARCH_LUBBOCK
  29         bool "Intel DBPXA250 Development Platform (aka Lubbock)"
  30         select PXA25x
  31         select SA1111
  32
  33 config MACH_MAINSTONE
  34         bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
  35         select PXA27x
  36
  37 config MACH_ZYLONITE
  38         bool
  39         select PXA3xx
  40
  41 config MACH_ZYLONITE300
  42         bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
  43         select CPU_PXA300
  44         select CPU_PXA310
  45         select MACH_ZYLONITE
  46
  47 config MACH_ZYLONITE320
  48         bool "PXA3xx Development Platform (aka Zylonite) PXA320"
  49         select CPU_PXA320
  50         select MACH_ZYLONITE
  51
  52 config MACH_LITTLETON
  53         bool "PXA3xx Form Factor Platform (aka Littleton)"
  54         select CPU_PXA300
  55         select CPU_PXA310
  56         select PXA3xx
  57
  58 config MACH_TAVOREVB
  59         bool "PXA930 Evaluation Board (aka TavorEVB)"
  60         select CPU_PXA930
  61         select CPU_PXA935
  62         select PXA3xx
  63         select FB
  64         select FB_PXA
  65
  66 config MACH_SAAR
  67         bool "PXA930 Handheld Platform (aka SAAR)"
  68         select CPU_PXA930
  69         select CPU_PXA935
  70         select PXA3xx
  71         select FB
  72         select FB_PXA
  73
  74 comment "Third Party Dev Platforms (sorted by vendor name)"
  75
  76 config ARCH_PXA_IDP
  77         bool "Accelent Xscale IDP"
  78         select PXA25x
  79
  80 config ARCH_VIPER
  81         bool "Arcom/Eurotech VIPER SBC"
  82         select ARCOM_PCMCIA
  83         select I2C_GPIO if I2C=y
  84         select ISA
  85         select PXA25x
  86
  87 config MACH_ARCOM_ZEUS
  88         bool "Arcom/Eurotech ZEUS SBC"
  89         select ARCOM_PCMCIA
  90         select ISA
  91         select PXA27x
  92
  93 config MACH_BALLOON3
  94         bool "Balloon 3 board"
  95         select IWMMXT
  96         select PXA27x
  97
  98 config MACH_CSB726
  99         bool "Enable Cogent CSB726 System On a Module"
 100         select IWMMXT
 101         select PXA27x
 102         help
 103           Say Y here if you intend to run this kernel on a Cogent
 104           CSB726 System On Module.
 105
 106 config CSB726_CSB701
 107         bool "Enable support for CSB701 baseboard"
 108         depends on MACH_CSB726
 109
 110 config MACH_ARMCORE
 111         bool "CompuLab CM-X255/CM-X270 modules"
 112         select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
 113         select IWMMXT
 114         select MIGHT_HAVE_PCI
 115         select NEED_MACH_IO_H if PCI
 116         select PXA25x
 117         select PXA27x
 118
 119 config MACH_EM_X270
 120         bool "CompuLab EM-x270 platform"
 121         select PXA27x
 122
 123 config MACH_EXEDA
 124         bool "CompuLab eXeda platform"
 125         select PXA27x
 126
 127 config MACH_CM_X300
 128         bool "CompuLab CM-X300 modules"
 129         select CPU_PXA300
 130         select CPU_PXA310
 131         select PXA3xx
 132
 133 config MACH_CAPC7117
 134         bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
 135         select CPU_PXA320
 136         select PXA3xx
 137
 138 config ARCH_GUMSTIX
 139         bool "Gumstix XScale 255 boards"
 140         select PXA25x
 141         help
 142           Say Y here if you intend to run this kernel on
 143           Basix, Connex, ws-200ax, ws-400ax systems
 144
 145 choice
 146         prompt "Gumstix Carrier/Expansion Board"
 147         depends on ARCH_GUMSTIX
 148
 149 config GUMSTIX_AM200EPD
 150         bool "Enable AM200EPD board support"
 151
 152 config GUMSTIX_AM300EPD
 153         bool "Enable AM300EPD board support"
 154
 155 endchoice
 156
 157 config MACH_INTELMOTE2
 158         bool "Intel Mote 2 Platform"
 159         select IWMMXT
 160         select PXA27x
 161
 162 config MACH_STARGATE2
 163         bool "Intel Stargate 2 Platform"
 164         select IWMMXT
 165         select PXA27x
 166
 167 config MACH_XCEP
 168         bool "Iskratel Electronics XCEP"
 169         select MTD
 170         select MTD_CFI
 171         select MTD_CFI_INTELEXT
 172         select MTD_PHYSMAP
 173         select PXA25x
 174         help
 175           PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
 176           Tuned for usage in Libera instruments for particle accelerators.
 177
 178 config TRIZEPS_PXA
 179         bool "PXA based Keith und Koep Trizeps DIMM-Modules"
 180
 181 config MACH_TRIZEPS4
 182         bool "Keith und Koep Trizeps4 DIMM-Module"
 183         depends on TRIZEPS_PXA
 184         select PXA27x
 185         select TRIZEPS_PCMCIA
 186
 187 config MACH_TRIZEPS4WL
 188         bool "Keith und Koep Trizeps4-WL DIMM-Module"
 189         depends on TRIZEPS_PXA
 190         select MACH_TRIZEPS4
 191         select PXA27x
 192         select TRIZEPS_PCMCIA
 193
 194 choice
 195         prompt "Select base board for Trizeps module"
 196         depends on TRIZEPS_PXA
 197
 198 config MACH_TRIZEPS_CONXS
 199         bool "ConXS Eval Board"
 200
 201 config MACH_TRIZEPS_UCONXS
 202         bool "uConXS Eval Board"
 203
 204 config MACH_TRIZEPS_ANY
 205         bool "another Board"
 206
 207 endchoice
 208
 209 config ARCOM_PCMCIA
 210         bool
 211         help
 212           Generic option for Arcom Viper/Zeus PCMCIA
 213
 214 config TRIZEPS_PCMCIA
 215         bool
 216         help
 217           Enable PCMCIA support for Trizeps modules
 218
 219 config MACH_LOGICPD_PXA270
 220         bool "LogicPD PXA270 Card Engine Development Platform"
 221         select PXA27x
 222
 223 config MACH_PCM027
 224         bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 225         select IWMMXT
 226         select PXA27x
 227
 228 config MACH_PCM990_BASEBOARD
 229         bool "PHYTEC PCM-990 development board"
 230         depends on MACH_PCM027
 231
 232 choice
 233         prompt "display on pcm990"
 234         depends on MACH_PCM990_BASEBOARD
 235
 236 config PCM990_DISPLAY_SHARP
 237         bool "sharp lq084v1dg21 stn display"
 238
 239 config PCM990_DISPLAY_NEC
 240         bool "nec nl6448bc20_18d tft display"
 241
 242 config PCM990_DISPLAY_NONE
 243         bool "no display"
 244
 245 endchoice
 246
 247 config MACH_COLIBRI
 248         bool "Toradex Colibri PXA270"
 249         select PXA27x
 250
 251 config MACH_COLIBRI_PXA270_INCOME
 252         bool "Income s.r.o. PXA270 SBC"
 253         depends on MACH_COLIBRI
 254         select PXA27x
 255
 256 config MACH_COLIBRI300
 257         bool "Toradex Colibri PXA300/310"
 258         select CPU_PXA300
 259         select CPU_PXA310
 260         select PXA3xx
 261
 262 config MACH_COLIBRI320
 263         bool "Toradex Colibri PXA320"
 264         select CPU_PXA320
 265         select PXA3xx
 266
 267 config MACH_COLIBRI_EVALBOARD
 268         bool "Toradex Colibri Evaluation Carrier Board support"
 269         depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
 270
 271 config MACH_VPAC270
 272         bool "Voipac PXA270"
 273         select HAVE_PATA_PLATFORM
 274         select PXA27x
 275         help
 276           PXA270 based Single Board Computer.
 277
 278 comment "End-user Products (sorted by vendor name)"
 279
 280 config MACH_H4700
 281         bool "HP iPAQ hx4700"
 282         select IWMMXT
 283         select PXA27x
 284
 285 config MACH_H5000
 286         bool "HP iPAQ h5000"
 287         select PXA25x
 288
 289 config MACH_HIMALAYA
 290         bool "HTC Himalaya Support"
 291         select CPU_PXA26x
 292
 293 config MACH_MAGICIAN
 294         bool "Enable HTC Magician Support"
 295         select IWMMXT
 296         select PXA27x
 297
 298 config MACH_MIOA701
 299         bool "Mitac Mio A701 Support"
 300         select GPIO_SYSFS
 301         select IWMMXT
 302         select PXA27x
 303         help
 304           Say Y here if you intend to run this kernel on a
 305           MIO A701. Currently there is only basic support
 306           for this PDA.
 307
 308 config PXA_EZX
 309         bool "Motorola EZX Platform"
 310         select IWMMXT
 311         select PXA27x
 312
 313 config MACH_EZX_A780
 314         bool "Motorola EZX A780"
 315         default y
 316         depends on PXA_EZX
 317
 318 config MACH_EZX_E680
 319         bool "Motorola EZX E680"
 320         default y
 321         depends on PXA_EZX
 322
 323 config MACH_EZX_A1200
 324         bool "Motorola EZX A1200"
 325         default y
 326         depends on PXA_EZX
 327
 328 config MACH_EZX_A910
 329         bool "Motorola EZX A910"
 330         default y
 331         depends on PXA_EZX
 332
 333 config MACH_EZX_E6
 334         bool "Motorola EZX E6"
 335         default y
 336         depends on PXA_EZX
 337
 338 config MACH_EZX_E2
 339         bool "Motorola EZX E2"
 340         default y
 341         depends on PXA_EZX
 342
 343 config MACH_MP900C
 344         bool "Nec Mobilepro 900/c"
 345         select PXA25x
 346
 347 config ARCH_PXA_PALM
 348         bool "PXA based Palm PDAs"
 349
 350 config MACH_PALM27X
 351         bool
 352
 353 config MACH_PALMTE2
 354         bool "Palm Tungsten|E2"
 355         default y
 356         depends on ARCH_PXA_PALM
 357         select PXA25x
 358         help
 359           Say Y here if you intend to run this kernel on a Palm Tungsten|E2
 360           handheld computer.
 361
 362 config MACH_PALMTC
 363         bool "Palm Tungsten|C"
 364         default y
 365         depends on ARCH_PXA_PALM
 366         select PXA25x
 367         help
 368           Say Y here if you intend to run this kernel on a Palm Tungsten|C
 369           handheld computer.
 370
 371 config MACH_PALMT5
 372         bool "Palm Tungsten|T5"
 373         default y
 374         depends on ARCH_PXA_PALM
 375         select IWMMXT
 376         select MACH_PALM27X
 377         select PXA27x
 378         help
 379           Say Y here if you intend to run this kernel on a Palm Tungsten|T5
 380           handheld computer.
 381
 382 config MACH_PALMTX
 383         bool "Palm T|X"
 384         default y
 385         depends on ARCH_PXA_PALM
 386         select IWMMXT
 387         select MACH_PALM27X
 388         select PXA27x
 389         help
 390           Say Y here if you intend to run this kernel on a Palm T|X
 391           handheld computer.
 392
 393 config MACH_PALMZ72
 394         bool "Palm Zire 72"
 395         default y
 396         depends on ARCH_PXA_PALM
 397         select IWMMXT
 398         select MACH_PALM27X
 399         select PXA27x
 400         help
 401           Say Y here if you intend to run this kernel on Palm Zire 72
 402           handheld computer.
 403
 404 config MACH_PALMLD
 405         bool "Palm LifeDrive"
 406         default y
 407         depends on ARCH_PXA_PALM
 408         select IWMMXT
 409         select MACH_PALM27X
 410         select PXA27x
 411         help
 412           Say Y here if you intend to run this kernel on a Palm LifeDrive
 413           handheld computer.
 414
 415 config PALM_TREO
 416         bool
 417         depends on ARCH_PXA_PALM
 418
 419 config MACH_CENTRO
 420         bool "Palm Centro 685 (GSM)"
 421         default y
 422         depends on ARCH_PXA_PALM
 423         select IWMMXT
 424         select MACH_PALM27X
 425         select PALM_TREO
 426         select PXA27x
 427         help
 428           Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
 429           smartphone.
 430
 431 config MACH_TREO680
 432         bool "Palm Treo 680"
 433         default y
 434         depends on ARCH_PXA_PALM
 435         select IWMMXT
 436         select MACH_PALM27X
 437         select PALM_TREO
 438         select PXA27x
 439         help
 440           Say Y here if you intend to run this kernel on Palm Treo 680
 441           smartphone.
 442
 443 config MACH_RAUMFELD_RC
 444         bool "Raumfeld Controller"
 445         select CPU_PXA300
 446         select POWER_SUPPLY
 447         select PXA3xx
 448
 449 config MACH_RAUMFELD_CONNECTOR
 450         bool "Raumfeld Connector"
 451         select CPU_PXA300
 452         select POWER_SUPPLY
 453         select PXA3xx
 454
 455 config MACH_RAUMFELD_SPEAKER
 456         bool "Raumfeld Speaker"
 457         select CPU_PXA300
 458         select POWER_SUPPLY
 459         select PXA3xx
 460
 461 config PXA_SHARPSL
 462         bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
 463         select SHARP_PARAM
 464         select SHARP_SCOOP
 465         help
 466           Say Y here if you intend to run this kernel on a
 467           Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
 468           SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
 469           SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 470           handheld computer.
 471
 472 config PXA_SHARPSL_DETECT_MACH_ID
 473         bool "Detect machine ID at run-time in the decompressor"
 474         depends on PXA_SHARPSL
 475         help
 476           Say Y here if you want the zImage decompressor to detect
 477           the Zaurus machine ID at run-time. For latest kexec-based
 478           boot loader, this is not necessary.
 479
 480 config MACH_POODLE
 481         bool "Enable Sharp SL-5600 (Poodle) Support"
 482         depends on PXA_SHARPSL
 483         select PXA25x
 484         select SHARP_LOCOMO
 485
 486 config MACH_CORGI
 487         bool "Enable Sharp SL-C700 (Corgi) Support"
 488         depends on PXA_SHARPSL
 489         select PXA25x
 490         select PXA_SHARP_C7xx
 491
 492 config MACH_SHEPHERD
 493         bool "Enable Sharp SL-C750 (Shepherd) Support"
 494         depends on PXA_SHARPSL
 495         select PXA25x
 496         select PXA_SHARP_C7xx
 497
 498 config MACH_HUSKY
 499         bool "Enable Sharp SL-C760 (Husky) Support"
 500         depends on PXA_SHARPSL
 501         select PXA25x
 502         select PXA_SHARP_C7xx
 503
 504 config MACH_AKITA
 505         bool "Enable Sharp SL-1000 (Akita) Support"
 506         depends on PXA_SHARPSL
 507         select I2C
 508         select I2C_PXA
 509         select MACH_SPITZ
 510         select PXA27x
 511         select PXA_SHARP_Cxx00
 512
 513 config MACH_SPITZ
 514         bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
 515         depends on PXA_SHARPSL
 516         select PXA27x
 517         select PXA_SHARP_Cxx00
 518
 519 config MACH_BORZOI
 520         bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
 521         depends on PXA_SHARPSL
 522         select PXA27x
 523         select PXA_SHARP_Cxx00
 524
 525 config MACH_TOSA
 526         bool "Enable Sharp SL-6000x (Tosa) Support"
 527         depends on PXA_SHARPSL
 528         select PXA25x
 529
 530 config TOSA_BT
 531         tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
 532         depends on MACH_TOSA
 533         select RFKILL
 534         help
 535           This is a simple driver that is able to control
 536           the state of built in bluetooth chip on tosa.
 537
 538 config TOSA_USE_EXT_KEYCODES
 539         bool "Tosa keyboard: use extended keycodes"
 540         depends on MACH_TOSA
 541         default n
 542         help
 543           Say Y here to enable the tosa keyboard driver to generate extended
 544           (>= 127) keycodes. Be aware, that they can't be correctly interpreted
 545           by either console keyboard driver or by Kdrive keybd driver.
 546
 547           Say Y only if you know, what you are doing!
 548
 549 config MACH_ICONTROL
 550         bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
 551         select CPU_PXA320
 552         select PXA3xx
 553
 554 config ARCH_PXA_ESERIES
 555         bool "PXA based Toshiba e-series PDAs"
 556         select FB_W100
 557         select PXA25x
 558
 559 config MACH_E330
 560         bool "Toshiba e330"
 561         default y
 562         depends on ARCH_PXA_ESERIES
 563         help
 564           Say Y here if you intend to run this kernel on a Toshiba
 565           e330 family PDA.
 566
 567 config MACH_E350
 568         bool "Toshiba e350"
 569         default y
 570         depends on ARCH_PXA_ESERIES
 571         help
 572           Say Y here if you intend to run this kernel on a Toshiba
 573           e350 family PDA.
 574
 575 config MACH_E740
 576         bool "Toshiba e740"
 577         default y
 578         depends on ARCH_PXA_ESERIES
 579         help
 580           Say Y here if you intend to run this kernel on a Toshiba
 581           e740 family PDA.
 582
 583 config MACH_E750
 584         bool "Toshiba e750"
 585         default y
 586         depends on ARCH_PXA_ESERIES
 587         help
 588           Say Y here if you intend to run this kernel on a Toshiba
 589           e750 family PDA.
 590
 591 config MACH_E400
 592         bool "Toshiba e400"
 593         default y
 594         depends on ARCH_PXA_ESERIES
 595         help
 596           Say Y here if you intend to run this kernel on a Toshiba
 597           e400 family PDA.
 598
 599 config MACH_E800
 600         bool "Toshiba e800"
 601         default y
 602         depends on ARCH_PXA_ESERIES
 603         help
 604           Say Y here if you intend to run this kernel on a Toshiba
 605           e800 family PDA.
 606
 607 config MACH_ZIPIT2
 608         bool "Zipit Z2 Handheld"
 609         select PXA27x
 610 endmenu
 611
 612 config PXA25x
 613         bool
 614         select CPU_XSCALE
 615         help
 616           Select code specific to PXA21x/25x/26x variants
 617
 618 config PXA27x
 619         bool
 620         select CPU_XSCALE
 621         help
 622           Select code specific to PXA27x variants
 623
 624 config CPU_PXA26x
 625         bool
 626         select PXA25x
 627         help
 628           Select code specific to PXA26x (codename Dalhart)
 629
 630 config PXA3xx
 631         bool
 632         select CPU_XSC3
 633         help
 634           Select code specific to PXA3xx variants
 635
 636 config CPU_PXA300
 637         bool
 638         select PXA3xx
 639         help
 640           PXA300 (codename Monahans-L)
 641
 642 config CPU_PXA310
 643         bool
 644         select CPU_PXA300
 645         select PXA310_ULPI if USB_ULPI
 646         help
 647           PXA310 (codename Monahans-LV)
 648
 649 config CPU_PXA320
 650         bool
 651         select PXA3xx
 652         help
 653           PXA320 (codename Monahans-P)
 654
 655 config CPU_PXA930
 656         bool
 657         select PXA3xx
 658         help
 659           PXA930 (codename Tavor-P)
 660
 661 config CPU_PXA935
 662         bool
 663         select CPU_PXA930
 664         help
 665           PXA935 (codename Tavor-P65)
 666
 667 config PXA_SHARP_C7xx
 668         bool
 669         select SHARPSL_PM
 670         help
 671           Enable support for all Sharp C7xx models
 672
 673 config PXA_SHARP_Cxx00
 674         bool
 675         select SHARPSL_PM
 676         help
 677           Enable common support for Sharp Cxx00 models
 678
 679 config SHARPSL_PM
 680         bool
 681         select APM_EMULATION
 682         select SHARPSL_PM_MAX1111
 683
 684 config SHARPSL_PM_MAX1111
 685         bool
 686         select HWMON
 687         select SENSORS_MAX1111
 688         select SPI
 689         select SPI_MASTER
 690
 691 config PXA310_ULPI
 692         bool
 693
 694 config PXA_SYSTEMS_CPLDS
 695         tristate "Motherboard cplds"
 696         default ARCH_LUBBOCK || MACH_MAINSTONE
 697         help
 698           This driver supports the Lubbock and Mainstone multifunction chip
 699           found on the pxa25x development platform system (Lubbock) and pxa27x
 700           development platform system (Mainstone). This IO board supports the
 701           interrupts handling, ethernet controller, flash chips, etc ...
 702
 703 endif