arch/arm/mach-pxa/Kconfig

   1 if ARCH_PXA
   2
   3 menu "Intel PXA2xx/PXA3xx Implementations"
   4
   5 comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
   6
   7 config MACH_PXA27X_DT
   8         bool "Support PXA27x platforms from device tree"
   9         select POWER_SUPPLY
  10         select PXA27x
  11         select USE_OF
  12         help
  13           Include support for Marvell PXA27x based platforms using
  14           the device tree. Needn't select any other machine while
  15           MACH_PXA27X_DT is enabled.
  16
  17 config MACH_PXA3XX_DT
  18         bool "Support PXA3xx platforms from device tree"
  19         select CPU_PXA300
  20         select POWER_SUPPLY
  21         select PXA3xx
  22         select USE_OF
  23         help
  24           Include support for Marvell PXA3xx based platforms using
  25           the device tree. Needn't select any other machine while
  26           MACH_PXA3XX_DT is enabled.
  27
  28 config ARCH_LUBBOCK
  29         bool "Intel DBPXA250 Development Platform (aka Lubbock)"
  30         select PXA25x
  31         select SA1111
  32
  33 config MACH_MAINSTONE
  34         bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
  35         select PXA27x
  36
  37 config MACH_ZYLONITE
  38         bool
  39         select PXA3xx
  40
  41 config MACH_ZYLONITE300
  42         bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
  43         select CPU_PXA300
  44         select CPU_PXA310
  45         select MACH_ZYLONITE
  46
  47 config MACH_ZYLONITE320
  48         bool "PXA3xx Development Platform (aka Zylonite) PXA320"
  49         select CPU_PXA320
  50         select MACH_ZYLONITE
  51
  52 config MACH_LITTLETON
  53         bool "PXA3xx Form Factor Platform (aka Littleton)"
  54         select CPU_PXA300
  55         select CPU_PXA310
  56         select PXA3xx
  57
  58 config MACH_TAVOREVB
  59         bool "PXA930 Evaluation Board (aka TavorEVB)"
  60         select CPU_PXA930
  61         select CPU_PXA935
  62         select PXA3xx
  63         select FB
  64         select FB_PXA
  65
  66 config MACH_SAAR
  67         bool "PXA930 Handheld Platform (aka SAAR)"
  68         select CPU_PXA930
  69         select CPU_PXA935
  70         select PXA3xx
  71         select FB
  72         select FB_PXA
  73
  74 comment "Third Party Dev Platforms (sorted by vendor name)"
  75
  76 config ARCH_PXA_IDP
  77         bool "Accelent Xscale IDP"
  78         select PXA25x
  79
  80 config ARCH_VIPER
  81         bool "Arcom/Eurotech VIPER SBC"
  82         select ARCOM_PCMCIA
  83         select I2C_GPIO if I2C=y
  84         select ISA
  85         select PXA25x
  86
  87 config MACH_ARCOM_ZEUS
  88         bool "Arcom/Eurotech ZEUS SBC"
  89         select ARCOM_PCMCIA
  90         select ISA
  91         select PXA27x
  92
  93 config MACH_BALLOON3
  94         bool "Balloon 3 board"
  95         select IWMMXT
  96         select PXA27x
  97
  98 config MACH_CSB726
  99         bool "Enable Cogent CSB726 System On a Module"
 100         select IWMMXT
 101         select PXA27x
 102         help
 103           Say Y here if you intend to run this kernel on a Cogent
 104           CSB726 System On Module.
 105
 106 config CSB726_CSB701
 107         bool "Enable support for CSB701 baseboard"
 108         depends on MACH_CSB726
 109
 110 config MACH_ARMCORE
 111         bool "CompuLab CM-X255/CM-X270 modules"
 112         select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
 113         select IWMMXT
 114         select MIGHT_HAVE_PCI
 115         select NEED_MACH_IO_H if PCI
 116         select PXA25x
 117         select PXA27x
 118
 119 config MACH_EM_X270
 120         bool "CompuLab EM-x270 platform"
 121         select PXA27x
 122
 123 config MACH_EXEDA
 124         bool "CompuLab eXeda platform"
 125         select PXA27x
 126
 127 config MACH_CM_X300
 128         bool "CompuLab CM-X300 modules"
 129         select CPU_PXA300
 130         select CPU_PXA310
 131         select PXA3xx
 132
 133 config MACH_CAPC7117
 134         bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
 135         select CPU_PXA320
 136         select PXA3xx
 137
 138 config ARCH_GUMSTIX
 139         bool "Gumstix XScale 255 boards"
 140         select PXA25x
 141         help
 142           Say Y here if you intend to run this kernel on
 143           Basix, Connex, ws-200ax, ws-400ax systems
 144
 145 choice
 146         prompt "Gumstix Carrier/Expansion Board"
 147         depends on ARCH_GUMSTIX
 148
 149 config GUMSTIX_AM200EPD
 150         bool "Enable AM200EPD board support"
 151
 152 config GUMSTIX_AM300EPD
 153         bool "Enable AM300EPD board support"
 154
 155 endchoice
 156
 157 config MACH_INTELMOTE2
 158         bool "Intel Mote 2 Platform"
 159         select IWMMXT
 160         select PXA27x
 161
 162 config MACH_STARGATE2
 163         bool "Intel Stargate 2 Platform"
 164         select IWMMXT
 165         select PXA27x
 166
 167 config MACH_XCEP
 168         bool "Iskratel Electronics XCEP"
 169         select MTD
 170         select MTD_CFI
 171         select MTD_CFI_INTELEXT
 172         select MTD_PHYSMAP
 173         select PXA25x
 174         help
 175           PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
 176           Tuned for usage in Libera instruments for particle accelerators.
 177
 178 config TRIZEPS_PXA
 179         bool "PXA based Keith und Koep Trizeps DIMM-Modules"
 180
 181 config MACH_TRIZEPS4
 182         bool "Keith und Koep Trizeps4 DIMM-Module"
 183         depends on TRIZEPS_PXA
 184         select PXA27x
 185         select TRIZEPS_PCMCIA
 186
 187 config MACH_TRIZEPS4WL
 188         bool "Keith und Koep Trizeps4-WL DIMM-Module"
 189         depends on TRIZEPS_PXA
 190         select MACH_TRIZEPS4
 191         select PXA27x
 192         select TRIZEPS_PCMCIA
 193
 194 choice
 195         prompt "Select base board for Trizeps module"
 196         depends on TRIZEPS_PXA
 197
 198 config MACH_TRIZEPS_CONXS
 199         bool "ConXS Eval Board"
 200
 201 config MACH_TRIZEPS_UCONXS
 202         bool "uConXS Eval Board"
 203
 204 config MACH_TRIZEPS_ANY
 205         bool "another Board"
 206
 207 endchoice
 208
 209 config ARCOM_PCMCIA
 210         bool
 211         help
 212           Generic option for Arcom Viper/Zeus PCMCIA
 213
 214 config TRIZEPS_PCMCIA
 215         bool
 216         help
 217           Enable PCMCIA support for Trizeps modules
 218
 219 config MACH_LOGICPD_PXA270
 220         bool "LogicPD PXA270 Card Engine Development Platform"
 221         select PXA27x
 222
 223 config MACH_PCM027
 224         bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 225         select IWMMXT
 226         select PXA27x
 227
 228 config MACH_PCM990_BASEBOARD
 229         bool "PHYTEC PCM-990 development board"
 230         depends on MACH_PCM027
 231
 232 choice
 233         prompt "display on pcm990"
 234         depends on MACH_PCM990_BASEBOARD
 235
 236 config PCM990_DISPLAY_SHARP
 237         bool "sharp lq084v1dg21 stn display"
 238
 239 config PCM990_DISPLAY_NEC
 240         bool "nec nl6448bc20_18d tft display"
 241
 242 config PCM990_DISPLAY_NONE
 243         bool "no display"
 244
 245 endchoice
 246
 247 config MACH_COLIBRI
 248         bool "Toradex Colibri PXA270"
 249         select PXA27x
 250
 251 config MACH_COLIBRI_PXA270_INCOME
 252         bool "Income s.r.o. PXA270 SBC"
 253         depends on MACH_COLIBRI
 254         select PXA27x
 255
 256 config MACH_COLIBRI300
 257         bool "Toradex Colibri PXA300/310"
 258         select CPU_PXA300
 259         select CPU_PXA310
 260         select PXA3xx
 261
 262 config MACH_COLIBRI320
 263         bool "Toradex Colibri PXA320"
 264         select CPU_PXA320
 265         select PXA3xx
 266
 267 config MACH_COLIBRI_EVALBOARD
 268         bool "Toradex Colibri Evaluation Carrier Board support"
 269         depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
 270
 271 config MACH_VPAC270
 272         bool "Voipac PXA270"
 273         select HAVE_PATA_PLATFORM
 274         select PXA27x
 275         help
 276           PXA270 based Single Board Computer.
 277
 278 comment "End-user Products (sorted by vendor name)"
 279
 280 config MACH_H4700
 281         bool "HP iPAQ hx4700"
 282         select IWMMXT
 283         select PXA27x
 284
 285 config MACH_H5000
 286         bool "HP iPAQ h5000"
 287         select PXA25x
 288
 289 config MACH_HIMALAYA
 290         bool "HTC Himalaya Support"
 291         select CPU_PXA26x
 292
 293 config MACH_MAGICIAN
 294         bool "Enable HTC Magician Support"
 295         select IWMMXT
 296         select PXA27x
 297
 298 config MACH_MIOA701
 299         bool "Mitac Mio A701 Support"
 300         select IWMMXT
 301         select PXA27x
 302         help
 303           Say Y here if you intend to run this kernel on a
 304           MIO A701. Currently there is only basic support
 305           for this PDA.
 306
 307 config PXA_EZX
 308         bool "Motorola EZX Platform"
 309         select IWMMXT
 310         select PXA27x
 311
 312 config MACH_EZX_A780
 313         bool "Motorola EZX A780"
 314         default y
 315         depends on PXA_EZX
 316
 317 config MACH_EZX_E680
 318         bool "Motorola EZX E680"
 319         default y
 320         depends on PXA_EZX
 321
 322 config MACH_EZX_A1200
 323         bool "Motorola EZX A1200"
 324         default y
 325         depends on PXA_EZX
 326
 327 config MACH_EZX_A910
 328         bool "Motorola EZX A910"
 329         default y
 330         depends on PXA_EZX
 331
 332 config MACH_EZX_E6
 333         bool "Motorola EZX E6"
 334         default y
 335         depends on PXA_EZX
 336
 337 config MACH_EZX_E2
 338         bool "Motorola EZX E2"
 339         default y
 340         depends on PXA_EZX
 341
 342 config MACH_MP900C
 343         bool "Nec Mobilepro 900/c"
 344         select PXA25x
 345
 346 config ARCH_PXA_PALM
 347         bool "PXA based Palm PDAs"
 348
 349 config MACH_PALM27X
 350         bool
 351
 352 config MACH_PALMTE2
 353         bool "Palm Tungsten|E2"
 354         default y
 355         depends on ARCH_PXA_PALM
 356         select PXA25x
 357         help
 358           Say Y here if you intend to run this kernel on a Palm Tungsten|E2
 359           handheld computer.
 360
 361 config MACH_PALMTC
 362         bool "Palm Tungsten|C"
 363         default y
 364         depends on ARCH_PXA_PALM
 365         select PXA25x
 366         help
 367           Say Y here if you intend to run this kernel on a Palm Tungsten|C
 368           handheld computer.
 369
 370 config MACH_PALMT5
 371         bool "Palm Tungsten|T5"
 372         default y
 373         depends on ARCH_PXA_PALM
 374         select IWMMXT
 375         select MACH_PALM27X
 376         select PXA27x
 377         help
 378           Say Y here if you intend to run this kernel on a Palm Tungsten|T5
 379           handheld computer.
 380
 381 config MACH_PALMTX
 382         bool "Palm T|X"
 383         default y
 384         depends on ARCH_PXA_PALM
 385         select IWMMXT
 386         select MACH_PALM27X
 387         select PXA27x
 388         help
 389           Say Y here if you intend to run this kernel on a Palm T|X
 390           handheld computer.
 391
 392 config MACH_PALMZ72
 393         bool "Palm Zire 72"
 394         default y
 395         depends on ARCH_PXA_PALM
 396         select IWMMXT
 397         select MACH_PALM27X
 398         select PXA27x
 399         help
 400           Say Y here if you intend to run this kernel on Palm Zire 72
 401           handheld computer.
 402
 403 config MACH_PALMLD
 404         bool "Palm LifeDrive"
 405         default y
 406         depends on ARCH_PXA_PALM
 407         select IWMMXT
 408         select MACH_PALM27X
 409         select PXA27x
 410         help
 411           Say Y here if you intend to run this kernel on a Palm LifeDrive
 412           handheld computer.
 413
 414 config PALM_TREO
 415         bool
 416         depends on ARCH_PXA_PALM
 417
 418 config MACH_CENTRO
 419         bool "Palm Centro 685 (GSM)"
 420         default y
 421         depends on ARCH_PXA_PALM
 422         select IWMMXT
 423         select MACH_PALM27X
 424         select PALM_TREO
 425         select PXA27x
 426         help
 427           Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
 428           smartphone.
 429
 430 config MACH_TREO680
 431         bool "Palm Treo 680"
 432         default y
 433         depends on ARCH_PXA_PALM
 434         select IWMMXT
 435         select MACH_PALM27X
 436         select PALM_TREO
 437         select PXA27x
 438         help
 439           Say Y here if you intend to run this kernel on Palm Treo 680
 440           smartphone.
 441
 442 config MACH_RAUMFELD_RC
 443         bool "Raumfeld Controller"
 444         select CPU_PXA300
 445         select POWER_SUPPLY
 446         select PXA3xx
 447
 448 config MACH_RAUMFELD_CONNECTOR
 449         bool "Raumfeld Connector"
 450         select CPU_PXA300
 451         select POWER_SUPPLY
 452         select PXA3xx
 453
 454 config MACH_RAUMFELD_SPEAKER
 455         bool "Raumfeld Speaker"
 456         select CPU_PXA300
 457         select POWER_SUPPLY
 458         select PXA3xx
 459
 460 config PXA_SHARPSL
 461         bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
 462         select SHARP_PARAM
 463         select SHARP_SCOOP
 464         help
 465           Say Y here if you intend to run this kernel on a
 466           Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
 467           SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
 468           SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 469           handheld computer.
 470
 471 config PXA_SHARPSL_DETECT_MACH_ID
 472         bool "Detect machine ID at run-time in the decompressor"
 473         depends on PXA_SHARPSL
 474         help
 475           Say Y here if you want the zImage decompressor to detect
 476           the Zaurus machine ID at run-time. For latest kexec-based
 477           boot loader, this is not necessary.
 478
 479 config MACH_POODLE
 480         bool "Enable Sharp SL-5600 (Poodle) Support"
 481         depends on PXA_SHARPSL
 482         select PXA25x
 483         select SHARP_LOCOMO
 484
 485 config MACH_CORGI
 486         bool "Enable Sharp SL-C700 (Corgi) Support"
 487         depends on PXA_SHARPSL
 488         select PXA25x
 489         select PXA_SHARP_C7xx
 490
 491 config MACH_SHEPHERD
 492         bool "Enable Sharp SL-C750 (Shepherd) Support"
 493         depends on PXA_SHARPSL
 494         select PXA25x
 495         select PXA_SHARP_C7xx
 496
 497 config MACH_HUSKY
 498         bool "Enable Sharp SL-C760 (Husky) Support"
 499         depends on PXA_SHARPSL
 500         select PXA25x
 501         select PXA_SHARP_C7xx
 502
 503 config MACH_AKITA
 504         bool "Enable Sharp SL-1000 (Akita) Support"
 505         depends on PXA_SHARPSL
 506         select I2C
 507         select I2C_PXA
 508         select MACH_SPITZ
 509         select PXA27x
 510         select PXA_SHARP_Cxx00
 511
 512 config MACH_SPITZ
 513         bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
 514         depends on PXA_SHARPSL
 515         select PXA27x
 516         select PXA_SHARP_Cxx00
 517
 518 config MACH_BORZOI
 519         bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
 520         depends on PXA_SHARPSL
 521         select PXA27x
 522         select PXA_SHARP_Cxx00
 523
 524 config MACH_TOSA
 525         bool "Enable Sharp SL-6000x (Tosa) Support"
 526         depends on PXA_SHARPSL
 527         select PXA25x
 528
 529 config TOSA_BT
 530         tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
 531         depends on MACH_TOSA && NET
 532         select RFKILL
 533         help
 534           This is a simple driver that is able to control
 535           the state of built in bluetooth chip on tosa.
 536
 537 config TOSA_USE_EXT_KEYCODES
 538         bool "Tosa keyboard: use extended keycodes"
 539         depends on MACH_TOSA
 540         default n
 541         help
 542           Say Y here to enable the tosa keyboard driver to generate extended
 543           (>= 127) keycodes. Be aware, that they can't be correctly interpreted
 544           by either console keyboard driver or by Kdrive keybd driver.
 545
 546           Say Y only if you know, what you are doing!
 547
 548 config MACH_ICONTROL
 549         bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
 550         select CPU_PXA320
 551         select PXA3xx
 552
 553 config ARCH_PXA_ESERIES
 554         bool "PXA based Toshiba e-series PDAs"
 555         select FB_W100
 556         select PXA25x
 557
 558 config MACH_E330
 559         bool "Toshiba e330"
 560         default y
 561         depends on ARCH_PXA_ESERIES
 562         help
 563           Say Y here if you intend to run this kernel on a Toshiba
 564           e330 family PDA.
 565
 566 config MACH_E350
 567         bool "Toshiba e350"
 568         default y
 569         depends on ARCH_PXA_ESERIES
 570         help
 571           Say Y here if you intend to run this kernel on a Toshiba
 572           e350 family PDA.
 573
 574 config MACH_E740
 575         bool "Toshiba e740"
 576         default y
 577         depends on ARCH_PXA_ESERIES
 578         help
 579           Say Y here if you intend to run this kernel on a Toshiba
 580           e740 family PDA.
 581
 582 config MACH_E750
 583         bool "Toshiba e750"
 584         default y
 585         depends on ARCH_PXA_ESERIES
 586         help
 587           Say Y here if you intend to run this kernel on a Toshiba
 588           e750 family PDA.
 589
 590 config MACH_E400
 591         bool "Toshiba e400"
 592         default y
 593         depends on ARCH_PXA_ESERIES
 594         help
 595           Say Y here if you intend to run this kernel on a Toshiba
 596           e400 family PDA.
 597
 598 config MACH_E800
 599         bool "Toshiba e800"
 600         default y
 601         depends on ARCH_PXA_ESERIES
 602         help
 603           Say Y here if you intend to run this kernel on a Toshiba
 604           e800 family PDA.
 605
 606 config MACH_ZIPIT2
 607         bool "Zipit Z2 Handheld"
 608         select PXA27x
 609 endmenu
 610
 611 config PXA25x
 612         bool
 613         select CPU_XSCALE
 614         help
 615           Select code specific to PXA21x/25x/26x variants
 616
 617 config PXA27x
 618         bool
 619         select CPU_XSCALE
 620         help
 621           Select code specific to PXA27x variants
 622
 623 config CPU_PXA26x
 624         bool
 625         select PXA25x
 626         help
 627           Select code specific to PXA26x (codename Dalhart)
 628
 629 config PXA3xx
 630         bool
 631         select CPU_XSC3
 632         help
 633           Select code specific to PXA3xx variants
 634
 635 config CPU_PXA300
 636         bool
 637         select PXA3xx
 638         help
 639           PXA300 (codename Monahans-L)
 640
 641 config CPU_PXA310
 642         bool
 643         select CPU_PXA300
 644         select PXA310_ULPI if USB_ULPI
 645         help
 646           PXA310 (codename Monahans-LV)
 647
 648 config CPU_PXA320
 649         bool
 650         select PXA3xx
 651         help
 652           PXA320 (codename Monahans-P)
 653
 654 config CPU_PXA930
 655         bool
 656         select PXA3xx
 657         help
 658           PXA930 (codename Tavor-P)
 659
 660 config CPU_PXA935
 661         bool
 662         select CPU_PXA930
 663         help
 664           PXA935 (codename Tavor-P65)
 665
 666 config PXA_SHARP_C7xx
 667         bool
 668         select SHARPSL_PM
 669         help
 670           Enable support for all Sharp C7xx models
 671
 672 config PXA_SHARP_Cxx00
 673         bool
 674         select SHARPSL_PM
 675         help
 676           Enable common support for Sharp Cxx00 models
 677
 678 config SHARPSL_PM
 679         bool
 680         select APM_EMULATION
 681         select SHARPSL_PM_MAX1111
 682
 683 config SHARPSL_PM_MAX1111
 684         bool
 685         select HWMON
 686         select SENSORS_MAX1111
 687         select SPI
 688         select SPI_MASTER
 689
 690 config PXA310_ULPI
 691         bool
 692
 693 config PXA_SYSTEMS_CPLDS
 694         tristate "Motherboard cplds"
 695         default ARCH_LUBBOCK || MACH_MAINSTONE
 696         help
 697           This driver supports the Lubbock and Mainstone multifunction chip
 698           found on the pxa25x development platform system (Lubbock) and pxa27x
 699           development platform system (Mainstone). This IO board supports the
 700           interrupts handling, ethernet controller, flash chips, etc ...
 701
 702 endif