arch/arm/mach-pxa/cm-x270-pci.c

   1 /*
   2  * linux/arch/arm/mach-pxa/cm-x270-pci.c
   3  *
   4  * PCI bios-type initialisation for PCI machines
   5  *
   6  * Bits taken from various places.
   7  *
   8  * Copyright (C) 2007 Compulab, Ltd.
   9  * Mike Rapoport <mike@compulab.co.il>
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License version 2 as
  13  * published by the Free Software Foundation.
  14  */
  15
  16 #include <linux/kernel.h>
  17 #include <linux/pci.h>
  18 #include <linux/init.h>
  19 #include <linux/device.h>
  20 #include <linux/platform_device.h>
  21 #include <linux/irq.h>
  22
  23 #include <asm/mach/pci.h>
  24 #include <asm/arch/cm-x270.h>
  25 #include <asm/arch/pxa-regs.h>
  26 #include <asm/mach-types.h>
  27
  28 #include <asm/hardware/it8152.h>
  29
  30 unsigned long it8152_base_address = CMX270_IT8152_VIRT;
  31
  32 /*
  33  * Only first 64MB of memory can be accessed via PCI.
  34  * We use GFP_DMA to allocate safe buffers to do map/unmap.
  35  * This is really ugly and we need a better way of specifying
  36  * DMA-capable regions of memory.
  37  */
  38 void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
  39         unsigned long *zhole_size)
  40 {
  41         unsigned int sz = SZ_64M >> PAGE_SHIFT;
  42
  43         pr_info("Adjusting zones for CM-x270\n");
  44
  45         /*
  46          * Only adjust if > 64M on current system
  47          */
  48         if (node || (zone_size[0] <= sz))
  49                 return;
  50
  51         zone_size[1] = zone_size[0] - sz;
  52         zone_size[0] = sz;
  53         zhole_size[1] = zhole_size[0];
  54         zhole_size[0] = 0;
  55 }
  56
  57 static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
  58 {
  59         /* clear our parent irq */
  60         GEDR(GPIO_IT8152_IRQ) = GPIO_bit(GPIO_IT8152_IRQ);
  61
  62         it8152_irq_demux(irq, desc);
  63 }
  64
  65 void __cmx270_pci_init_irq(void)
  66 {
  67         it8152_init_irq();
  68         pxa_gpio_mode(IRQ_TO_GPIO(GPIO_IT8152_IRQ));
  69         set_irq_type(IRQ_GPIO(GPIO_IT8152_IRQ), IRQT_RISING);
  70
  71         set_irq_chained_handler(IRQ_GPIO(GPIO_IT8152_IRQ),
  72                                 cmx270_it8152_irq_demux);
  73 }
  74
  75 #ifdef CONFIG_PM
  76 static unsigned long sleep_save_ite[10];
  77
  78 void __cmx270_pci_suspend(void)
  79 {
  80         /* save ITE state */
  81         sleep_save_ite[0] = __raw_readl(IT8152_INTC_PDCNIMR);
  82         sleep_save_ite[1] = __raw_readl(IT8152_INTC_LPCNIMR);
  83         sleep_save_ite[2] = __raw_readl(IT8152_INTC_LPNIAR);
  84
  85         /* Clear ITE IRQ's */
  86         __raw_writel((0), IT8152_INTC_PDCNIRR);
  87         __raw_writel((0), IT8152_INTC_LPCNIRR);
  88 }
  89
  90 void __cmx270_pci_resume(void)
  91 {
  92         /* restore IT8152 state */
  93         __raw_writel((sleep_save_ite[0]), IT8152_INTC_PDCNIMR);
  94         __raw_writel((sleep_save_ite[1]), IT8152_INTC_LPCNIMR);
  95         __raw_writel((sleep_save_ite[2]), IT8152_INTC_LPNIAR);
  96 }
  97 #else
  98 void cmx270_pci_suspend(void) {}
  99 void cmx270_pci_resume(void) {}
 100 #endif
 101
 102 /* PCI IRQ mapping*/
 103 static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 104 {
 105         int irq;
 106
 107         dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __FUNCTION__, slot, pin);
 108
 109         irq = it8152_pci_map_irq(dev, slot, pin);
 110         if (irq)
 111                 return irq;
 112
 113         /*
 114           Here comes the ugly part. The routing is baseboard specific,
 115           but defining a platform for each possible base of CM-x270 is
 116           unrealistic. Here we keep mapping for ATXBase and SB-x270.
 117         */
 118         /* ATXBASE PCI slot */
 119         if (slot == 7)
 120                 return IT8152_PCI_INTA;
 121
 122         /* ATXBase/SB-x270 CardBus */
 123         if (slot == 8 || slot == 0)
 124                 return IT8152_PCI_INTB;
 125
 126         /* ATXBase Ethernet */
 127         if (slot == 9)
 128                 return IT8152_PCI_INTA;
 129
 130         /* SB-x270 Ethernet */
 131         if (slot == 16)
 132                 return IT8152_PCI_INTA;
 133
 134         /* PC104+ interrupt routing */
 135         if ((slot == 17) || (slot == 19))
 136                 return IT8152_PCI_INTA;
 137         if ((slot == 18) || (slot == 20))
 138                 return IT8152_PCI_INTB;
 139
 140         return(0);
 141 }
 142
 143 static void cmx270_pci_preinit(void)
 144 {
 145         pr_info("Initializing CM-X270 PCI subsystem\n");
 146
 147         __raw_writel(0x800, IT8152_PCI_CFG_ADDR);
 148         if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) {
 149                 pr_info("PCI Bridge found.\n");
 150
 151                 /* set PCI I/O base at 0 */
 152                 writel(0x848, IT8152_PCI_CFG_ADDR);
 153                 writel(0, IT8152_PCI_CFG_DATA);
 154
 155                 /* set PCI memory base at 0 */
 156                 writel(0x840, IT8152_PCI_CFG_ADDR);
 157                 writel(0, IT8152_PCI_CFG_DATA);
 158
 159                 writel(0x20, IT8152_GPIO_GPDR);
 160
 161                 /* CardBus Controller on ATXbase baseboard */
 162                 writel(0x4000, IT8152_PCI_CFG_ADDR);
 163                 if (readl(IT8152_PCI_CFG_DATA) == 0xAC51104C) {
 164                         pr_info("CardBus Bridge found.\n");
 165
 166                         /* Configure socket 0 */
 167                         writel(0x408C, IT8152_PCI_CFG_ADDR);
 168                         writel(0x1022, IT8152_PCI_CFG_DATA);
 169
 170                         writel(0x4080, IT8152_PCI_CFG_ADDR);
 171                         writel(0x3844d060, IT8152_PCI_CFG_DATA);
 172
 173                         writel(0x4090, IT8152_PCI_CFG_ADDR);
 174                         writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) |
 175                                 0x60440000),
 176                                IT8152_PCI_CFG_DATA);
 177
 178                         writel(0x4018, IT8152_PCI_CFG_ADDR);
 179                         writel(0xb0000000, IT8152_PCI_CFG_DATA);
 180
 181                         /* Configure socket 1 */
 182                         writel(0x418C, IT8152_PCI_CFG_ADDR);
 183                         writel(0x1022, IT8152_PCI_CFG_DATA);
 184
 185                         writel(0x4180, IT8152_PCI_CFG_ADDR);
 186                         writel(0x3844d060, IT8152_PCI_CFG_DATA);
 187
 188                         writel(0x4190, IT8152_PCI_CFG_ADDR);
 189                         writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) |
 190                                 0x60440000),
 191                                IT8152_PCI_CFG_DATA);
 192
 193                         writel(0x4118, IT8152_PCI_CFG_ADDR);
 194                         writel(0xb0000000, IT8152_PCI_CFG_DATA);
 195                 }
 196         }
 197 }
 198
 199 static struct hw_pci cmx270_pci __initdata = {
 200         .swizzle        = pci_std_swizzle,
 201         .map_irq        = cmx270_pci_map_irq,
 202         .nr_controllers = 1,
 203         .setup          = it8152_pci_setup,
 204         .scan           = it8152_pci_scan_bus,
 205         .preinit        = cmx270_pci_preinit,
 206 };
 207
 208 static int __init cmx270_init_pci(void)
 209 {
 210         if (machine_is_armcore())
 211                 pci_common_init(&cmx270_pci);
 212
 213         return 0;
 214 }
 215
 216 subsys_initcall(cmx270_init_pci);