oprofile: introduce module_param oprofile.cpu_type
[deliverable/linux.git] / arch / arm / mach-pxa / corgi.c
1 /*
2 * Support for Sharp SL-C7xx PDAs
3 * Models: SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky)
4 *
5 * Copyright (c) 2004-2005 Richard Purdie
6 *
7 * Based on Sharp's 2.4 kernel patches/lubbock.c
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 *
13 */
14
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/major.h>
19 #include <linux/fs.h>
20 #include <linux/interrupt.h>
21 #include <linux/mmc/host.h>
22 #include <linux/mtd/physmap.h>
23 #include <linux/pm.h>
24 #include <linux/gpio.h>
25 #include <linux/backlight.h>
26 #include <linux/io.h>
27 #include <linux/spi/spi.h>
28 #include <linux/spi/ads7846.h>
29 #include <linux/spi/corgi_lcd.h>
30 #include <linux/mtd/sharpsl.h>
31 #include <video/w100fb.h>
32
33 #include <asm/setup.h>
34 #include <asm/memory.h>
35 #include <asm/mach-types.h>
36 #include <mach/hardware.h>
37 #include <asm/irq.h>
38 #include <asm/system.h>
39
40 #include <asm/mach/arch.h>
41 #include <asm/mach/map.h>
42 #include <asm/mach/irq.h>
43
44 #include <mach/pxa25x.h>
45 #include <mach/i2c.h>
46 #include <mach/irda.h>
47 #include <mach/mmc.h>
48 #include <mach/udc.h>
49 #include <mach/pxa2xx_spi.h>
50 #include <mach/corgi.h>
51 #include <mach/sharpsl.h>
52
53 #include <asm/mach/sharpsl_param.h>
54 #include <asm/hardware/scoop.h>
55
56 #include "generic.h"
57 #include "devices.h"
58 #include "sharpsl.h"
59
60 static unsigned long corgi_pin_config[] __initdata = {
61 /* Static Memory I/O */
62 GPIO78_nCS_2, /* w100fb */
63 GPIO80_nCS_4, /* scoop */
64
65 /* SSP1 */
66 GPIO23_SSP1_SCLK,
67 GPIO25_SSP1_TXD,
68 GPIO26_SSP1_RXD,
69 GPIO24_GPIO, /* CORGI_GPIO_ADS7846_CS - SFRM as chip select */
70
71 /* I2S */
72 GPIO28_I2S_BITCLK_OUT,
73 GPIO29_I2S_SDATA_IN,
74 GPIO30_I2S_SDATA_OUT,
75 GPIO31_I2S_SYNC,
76 GPIO32_I2S_SYSCLK,
77
78 /* Infra-Red */
79 GPIO47_FICP_TXD,
80 GPIO46_FICP_RXD,
81
82 /* FFUART */
83 GPIO40_FFUART_DTR,
84 GPIO41_FFUART_RTS,
85 GPIO39_FFUART_TXD,
86 GPIO37_FFUART_DSR,
87 GPIO34_FFUART_RXD,
88 GPIO35_FFUART_CTS,
89
90 /* PC Card */
91 GPIO48_nPOE,
92 GPIO49_nPWE,
93 GPIO50_nPIOR,
94 GPIO51_nPIOW,
95 GPIO52_nPCE_1,
96 GPIO53_nPCE_2,
97 GPIO54_nPSKTSEL,
98 GPIO55_nPREG,
99 GPIO56_nPWAIT,
100 GPIO57_nIOIS16,
101
102 /* MMC */
103 GPIO6_MMC_CLK,
104 GPIO8_MMC_CS0,
105
106 /* GPIO */
107 GPIO9_GPIO, /* CORGI_GPIO_nSD_DETECT */
108 GPIO7_GPIO, /* CORGI_GPIO_nSD_WP */
109 GPIO33_GPIO, /* CORGI_GPIO_SD_PWR */
110 GPIO22_GPIO, /* CORGI_GPIO_IR_ON */
111 GPIO44_GPIO, /* CORGI_GPIO_HSYNC */
112
113 GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
114 };
115
116 /*
117 * Corgi SCOOP Device
118 */
119 static struct resource corgi_scoop_resources[] = {
120 [0] = {
121 .start = 0x10800000,
122 .end = 0x10800fff,
123 .flags = IORESOURCE_MEM,
124 },
125 };
126
127 static struct scoop_config corgi_scoop_setup = {
128 .io_dir = CORGI_SCOOP_IO_DIR,
129 .io_out = CORGI_SCOOP_IO_OUT,
130 .gpio_base = CORGI_SCOOP_GPIO_BASE,
131 };
132
133 struct platform_device corgiscoop_device = {
134 .name = "sharp-scoop",
135 .id = -1,
136 .dev = {
137 .platform_data = &corgi_scoop_setup,
138 },
139 .num_resources = ARRAY_SIZE(corgi_scoop_resources),
140 .resource = corgi_scoop_resources,
141 };
142
143 static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
144 {
145 .dev = &corgiscoop_device.dev,
146 .irq = CORGI_IRQ_GPIO_CF_IRQ,
147 .cd_irq = CORGI_IRQ_GPIO_CF_CD,
148 .cd_irq_str = "PCMCIA0 CD",
149 },
150 };
151
152 static struct scoop_pcmcia_config corgi_pcmcia_config = {
153 .devs = &corgi_pcmcia_scoop[0],
154 .num_devs = 1,
155 };
156
157 EXPORT_SYMBOL(corgiscoop_device);
158
159 static struct w100_mem_info corgi_fb_mem = {
160 .ext_cntl = 0x00040003,
161 .sdram_mode_reg = 0x00650021,
162 .ext_timing_cntl = 0x10002a4a,
163 .io_cntl = 0x7ff87012,
164 .size = 0x1fffff,
165 };
166
167 static struct w100_gen_regs corgi_fb_regs = {
168 .lcd_format = 0x00000003,
169 .lcdd_cntl1 = 0x01CC0000,
170 .lcdd_cntl2 = 0x0003FFFF,
171 .genlcd_cntl1 = 0x00FFFF0D,
172 .genlcd_cntl2 = 0x003F3003,
173 .genlcd_cntl3 = 0x000102aa,
174 };
175
176 static struct w100_gpio_regs corgi_fb_gpio = {
177 .init_data1 = 0x000000bf,
178 .init_data2 = 0x00000000,
179 .gpio_dir1 = 0x00000000,
180 .gpio_oe1 = 0x03c0feff,
181 .gpio_dir2 = 0x00000000,
182 .gpio_oe2 = 0x00000000,
183 };
184
185 static struct w100_mode corgi_fb_modes[] = {
186 {
187 .xres = 480,
188 .yres = 640,
189 .left_margin = 0x56,
190 .right_margin = 0x55,
191 .upper_margin = 0x03,
192 .lower_margin = 0x00,
193 .crtc_ss = 0x82360056,
194 .crtc_ls = 0xA0280000,
195 .crtc_gs = 0x80280028,
196 .crtc_vpos_gs = 0x02830002,
197 .crtc_rev = 0x00400008,
198 .crtc_dclk = 0xA0000000,
199 .crtc_gclk = 0x8015010F,
200 .crtc_goe = 0x80100110,
201 .crtc_ps1_active = 0x41060010,
202 .pll_freq = 75,
203 .fast_pll_freq = 100,
204 .sysclk_src = CLK_SRC_PLL,
205 .sysclk_divider = 0,
206 .pixclk_src = CLK_SRC_PLL,
207 .pixclk_divider = 2,
208 .pixclk_divider_rotated = 6,
209 },{
210 .xres = 240,
211 .yres = 320,
212 .left_margin = 0x27,
213 .right_margin = 0x2e,
214 .upper_margin = 0x01,
215 .lower_margin = 0x00,
216 .crtc_ss = 0x81170027,
217 .crtc_ls = 0xA0140000,
218 .crtc_gs = 0xC0140014,
219 .crtc_vpos_gs = 0x00010141,
220 .crtc_rev = 0x00400008,
221 .crtc_dclk = 0xA0000000,
222 .crtc_gclk = 0x8015010F,
223 .crtc_goe = 0x80100110,
224 .crtc_ps1_active = 0x41060010,
225 .pll_freq = 0,
226 .fast_pll_freq = 0,
227 .sysclk_src = CLK_SRC_XTAL,
228 .sysclk_divider = 0,
229 .pixclk_src = CLK_SRC_XTAL,
230 .pixclk_divider = 1,
231 .pixclk_divider_rotated = 1,
232 },
233
234 };
235
236 static struct w100fb_mach_info corgi_fb_info = {
237 .init_mode = INIT_MODE_ROTATED,
238 .mem = &corgi_fb_mem,
239 .regs = &corgi_fb_regs,
240 .modelist = &corgi_fb_modes[0],
241 .num_modes = 2,
242 .gpio = &corgi_fb_gpio,
243 .xtal_freq = 12500000,
244 .xtal_dbl = 0,
245 };
246
247 static struct resource corgi_fb_resources[] = {
248 [0] = {
249 .start = 0x08000000,
250 .end = 0x08ffffff,
251 .flags = IORESOURCE_MEM,
252 },
253 };
254
255 static struct platform_device corgifb_device = {
256 .name = "w100fb",
257 .id = -1,
258 .num_resources = ARRAY_SIZE(corgi_fb_resources),
259 .resource = corgi_fb_resources,
260 .dev = {
261 .platform_data = &corgi_fb_info,
262 },
263
264 };
265
266 /*
267 * Corgi Keyboard Device
268 */
269 static struct platform_device corgikbd_device = {
270 .name = "corgi-keyboard",
271 .id = -1,
272 };
273
274 /*
275 * Corgi LEDs
276 */
277 static struct gpio_led corgi_gpio_leds[] = {
278 {
279 .name = "corgi:amber:charge",
280 .default_trigger = "sharpsl-charge",
281 .gpio = CORGI_GPIO_LED_ORANGE,
282 },
283 {
284 .name = "corgi:green:mail",
285 .default_trigger = "nand-disk",
286 .gpio = CORGI_GPIO_LED_GREEN,
287 },
288 };
289
290 static struct gpio_led_platform_data corgi_gpio_leds_info = {
291 .leds = corgi_gpio_leds,
292 .num_leds = ARRAY_SIZE(corgi_gpio_leds),
293 };
294
295 static struct platform_device corgiled_device = {
296 .name = "leds-gpio",
297 .id = -1,
298 .dev = {
299 .platform_data = &corgi_gpio_leds_info,
300 },
301 };
302
303 /*
304 * MMC/SD Device
305 *
306 * The card detect interrupt isn't debounced so we delay it by 250ms
307 * to give the card a chance to fully insert/eject.
308 */
309 static struct pxamci_platform_data corgi_mci_platform_data;
310
311 static int corgi_mci_init(struct device *dev, irq_handler_t corgi_detect_int, void *data)
312 {
313 int err;
314
315 err = gpio_request(CORGI_GPIO_nSD_DETECT, "nSD_DETECT");
316 if (err)
317 goto err_out;
318
319 err = gpio_request(CORGI_GPIO_nSD_WP, "nSD_WP");
320 if (err)
321 goto err_free_1;
322
323 err = gpio_request(CORGI_GPIO_SD_PWR, "SD_PWR");
324 if (err)
325 goto err_free_2;
326
327 gpio_direction_input(CORGI_GPIO_nSD_DETECT);
328 gpio_direction_input(CORGI_GPIO_nSD_WP);
329 gpio_direction_output(CORGI_GPIO_SD_PWR, 0);
330
331 corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
332
333 err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
334 IRQF_DISABLED | IRQF_TRIGGER_RISING |
335 IRQF_TRIGGER_FALLING,
336 "MMC card detect", data);
337 if (err) {
338 pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
339 __func__);
340 goto err_free_3;
341 }
342 return 0;
343
344 err_free_3:
345 gpio_free(CORGI_GPIO_SD_PWR);
346 err_free_2:
347 gpio_free(CORGI_GPIO_nSD_WP);
348 err_free_1:
349 gpio_free(CORGI_GPIO_nSD_DETECT);
350 err_out:
351 return err;
352 }
353
354 static void corgi_mci_setpower(struct device *dev, unsigned int vdd)
355 {
356 struct pxamci_platform_data* p_d = dev->platform_data;
357
358 gpio_set_value(CORGI_GPIO_SD_PWR, ((1 << vdd) & p_d->ocr_mask));
359 }
360
361 static int corgi_mci_get_ro(struct device *dev)
362 {
363 return gpio_get_value(CORGI_GPIO_nSD_WP);
364 }
365
366 static void corgi_mci_exit(struct device *dev, void *data)
367 {
368 free_irq(CORGI_IRQ_GPIO_nSD_DETECT, data);
369 gpio_free(CORGI_GPIO_SD_PWR);
370 gpio_free(CORGI_GPIO_nSD_WP);
371 gpio_free(CORGI_GPIO_nSD_DETECT);
372 }
373
374 static struct pxamci_platform_data corgi_mci_platform_data = {
375 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
376 .init = corgi_mci_init,
377 .get_ro = corgi_mci_get_ro,
378 .setpower = corgi_mci_setpower,
379 .exit = corgi_mci_exit,
380 };
381
382
383 /*
384 * Irda
385 */
386 static void corgi_irda_transceiver_mode(struct device *dev, int mode)
387 {
388 gpio_set_value(CORGI_GPIO_IR_ON, mode & IR_OFF);
389 pxa2xx_transceiver_mode(dev, mode);
390 }
391
392 static int corgi_irda_startup(struct device *dev)
393 {
394 int err;
395
396 err = gpio_request(CORGI_GPIO_IR_ON, "IR_ON");
397 if (err)
398 return err;
399
400 gpio_direction_output(CORGI_GPIO_IR_ON, 1);
401 return 0;
402 }
403
404 static void corgi_irda_shutdown(struct device *dev)
405 {
406 gpio_free(CORGI_GPIO_IR_ON);
407 }
408
409 static struct pxaficp_platform_data corgi_ficp_platform_data = {
410 .transceiver_cap = IR_SIRMODE | IR_OFF,
411 .transceiver_mode = corgi_irda_transceiver_mode,
412 .startup = corgi_irda_startup,
413 .shutdown = corgi_irda_shutdown,
414 };
415
416
417 /*
418 * USB Device Controller
419 */
420 static struct pxa2xx_udc_mach_info udc_info __initdata = {
421 /* no connect GPIO; corgi can't tell connection status */
422 .gpio_pullup = CORGI_GPIO_USB_PULLUP,
423 };
424
425 #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MASTER)
426 static struct pxa2xx_spi_master corgi_spi_info = {
427 .num_chipselect = 3,
428 };
429
430 static struct ads7846_platform_data corgi_ads7846_info = {
431 .model = 7846,
432 .vref_delay_usecs = 100,
433 .x_plate_ohms = 419,
434 .y_plate_ohms = 486,
435 .gpio_pendown = CORGI_GPIO_TP_INT,
436 };
437
438 static void corgi_ads7846_cs(u32 command)
439 {
440 gpio_set_value(CORGI_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
441 }
442
443 static struct pxa2xx_spi_chip corgi_ads7846_chip = {
444 .cs_control = corgi_ads7846_cs,
445 };
446
447 static void corgi_bl_kick_battery(void)
448 {
449 void (*kick_batt)(void);
450
451 kick_batt = symbol_get(sharpsl_battery_kick);
452 if (kick_batt) {
453 kick_batt();
454 symbol_put(sharpsl_battery_kick);
455 }
456 }
457
458 static struct corgi_lcd_platform_data corgi_lcdcon_info = {
459 .init_mode = CORGI_LCD_MODE_VGA,
460 .max_intensity = 0x2f,
461 .default_intensity = 0x1f,
462 .limit_mask = 0x0b,
463 .gpio_backlight_cont = CORGI_GPIO_BACKLIGHT_CONT,
464 .gpio_backlight_on = -1,
465 .kick_battery = corgi_bl_kick_battery,
466 };
467
468 static void corgi_lcdcon_cs(u32 command)
469 {
470 gpio_set_value(CORGI_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
471 }
472
473 static struct pxa2xx_spi_chip corgi_lcdcon_chip = {
474 .cs_control = corgi_lcdcon_cs,
475 };
476
477 static void corgi_max1111_cs(u32 command)
478 {
479 gpio_set_value(CORGI_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
480 }
481
482 static struct pxa2xx_spi_chip corgi_max1111_chip = {
483 .cs_control = corgi_max1111_cs,
484 };
485
486 static struct spi_board_info corgi_spi_devices[] = {
487 {
488 .modalias = "ads7846",
489 .max_speed_hz = 1200000,
490 .bus_num = 1,
491 .chip_select = 0,
492 .platform_data = &corgi_ads7846_info,
493 .controller_data= &corgi_ads7846_chip,
494 .irq = gpio_to_irq(CORGI_GPIO_TP_INT),
495 }, {
496 .modalias = "corgi-lcd",
497 .max_speed_hz = 50000,
498 .bus_num = 1,
499 .chip_select = 1,
500 .platform_data = &corgi_lcdcon_info,
501 .controller_data= &corgi_lcdcon_chip,
502 }, {
503 .modalias = "max1111",
504 .max_speed_hz = 450000,
505 .bus_num = 1,
506 .chip_select = 2,
507 .controller_data= &corgi_max1111_chip,
508 },
509 };
510
511 static void __init corgi_init_spi(void)
512 {
513 int err;
514
515 err = gpio_request(CORGI_GPIO_ADS7846_CS, "ADS7846_CS");
516 if (err)
517 return;
518
519 err = gpio_request(CORGI_GPIO_LCDCON_CS, "LCDCON_CS");
520 if (err)
521 goto err_free_1;
522
523 err = gpio_request(CORGI_GPIO_MAX1111_CS, "MAX1111_CS");
524 if (err)
525 goto err_free_2;
526
527 gpio_direction_output(CORGI_GPIO_ADS7846_CS, 1);
528 gpio_direction_output(CORGI_GPIO_LCDCON_CS, 1);
529 gpio_direction_output(CORGI_GPIO_MAX1111_CS, 1);
530
531 pxa2xx_set_spi_info(1, &corgi_spi_info);
532 spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
533 return;
534
535 err_free_2:
536 gpio_free(CORGI_GPIO_LCDCON_CS);
537 err_free_1:
538 gpio_free(CORGI_GPIO_ADS7846_CS);
539 }
540 #else
541 static inline void corgi_init_spi(void) {}
542 #endif
543
544 static struct mtd_partition sharpsl_nand_partitions[] = {
545 {
546 .name = "System Area",
547 .offset = 0,
548 .size = 7 * 1024 * 1024,
549 },
550 {
551 .name = "Root Filesystem",
552 .offset = 7 * 1024 * 1024,
553 .size = 25 * 1024 * 1024,
554 },
555 {
556 .name = "Home Filesystem",
557 .offset = MTDPART_OFS_APPEND,
558 .size = MTDPART_SIZ_FULL,
559 },
560 };
561
562 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
563
564 static struct nand_bbt_descr sharpsl_bbt = {
565 .options = 0,
566 .offs = 4,
567 .len = 2,
568 .pattern = scan_ff_pattern
569 };
570
571 static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
572 .badblock_pattern = &sharpsl_bbt,
573 .partitions = sharpsl_nand_partitions,
574 .nr_partitions = ARRAY_SIZE(sharpsl_nand_partitions),
575 };
576
577 static struct resource sharpsl_nand_resources[] = {
578 {
579 .start = 0x0C000000,
580 .end = 0x0C000FFF,
581 .flags = IORESOURCE_MEM,
582 },
583 };
584
585 static struct platform_device sharpsl_nand_device = {
586 .name = "sharpsl-nand",
587 .id = -1,
588 .resource = sharpsl_nand_resources,
589 .num_resources = ARRAY_SIZE(sharpsl_nand_resources),
590 .dev.platform_data = &sharpsl_nand_platform_data,
591 };
592
593 static struct mtd_partition sharpsl_rom_parts[] = {
594 {
595 .name ="Boot PROM Filesystem",
596 .offset = 0x00120000,
597 .size = MTDPART_SIZ_FULL,
598 },
599 };
600
601 static struct physmap_flash_data sharpsl_rom_data = {
602 .width = 2,
603 .nr_parts = ARRAY_SIZE(sharpsl_rom_parts),
604 .parts = sharpsl_rom_parts,
605 };
606
607 static struct resource sharpsl_rom_resources[] = {
608 {
609 .start = 0x00000000,
610 .end = 0x007fffff,
611 .flags = IORESOURCE_MEM,
612 },
613 };
614
615 static struct platform_device sharpsl_rom_device = {
616 .name = "physmap-flash",
617 .id = -1,
618 .resource = sharpsl_rom_resources,
619 .num_resources = ARRAY_SIZE(sharpsl_rom_resources),
620 .dev.platform_data = &sharpsl_rom_data,
621 };
622
623 static struct platform_device *devices[] __initdata = {
624 &corgiscoop_device,
625 &corgifb_device,
626 &corgikbd_device,
627 &corgiled_device,
628 &sharpsl_nand_device,
629 &sharpsl_rom_device,
630 };
631
632 static void corgi_poweroff(void)
633 {
634 if (!machine_is_corgi())
635 /* Green LED off tells the bootloader to halt */
636 gpio_set_value(CORGI_GPIO_LED_GREEN, 0);
637
638 arm_machine_restart('h', NULL);
639 }
640
641 static void corgi_restart(char mode, const char *cmd)
642 {
643 if (!machine_is_corgi())
644 /* Green LED on tells the bootloader to reboot */
645 gpio_set_value(CORGI_GPIO_LED_GREEN, 1);
646
647 arm_machine_restart('h', cmd);
648 }
649
650 static void __init corgi_init(void)
651 {
652 pm_power_off = corgi_poweroff;
653 arm_pm_restart = corgi_restart;
654
655 /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
656 PCFR |= PCFR_OPDE;
657
658 pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
659
660 corgi_init_spi();
661
662 pxa_set_udc_info(&udc_info);
663 pxa_set_mci_info(&corgi_mci_platform_data);
664 pxa_set_ficp_info(&corgi_ficp_platform_data);
665 pxa_set_i2c_info(NULL);
666
667 platform_scoop_config = &corgi_pcmcia_config;
668
669 if (machine_is_husky())
670 sharpsl_nand_partitions[1].size = 53 * 1024 * 1024;
671
672 platform_add_devices(devices, ARRAY_SIZE(devices));
673 }
674
675 static void __init fixup_corgi(struct machine_desc *desc,
676 struct tag *tags, char **cmdline, struct meminfo *mi)
677 {
678 sharpsl_save_param();
679 mi->nr_banks=1;
680 mi->bank[0].start = 0xa0000000;
681 mi->bank[0].node = 0;
682 if (machine_is_corgi())
683 mi->bank[0].size = (32*1024*1024);
684 else
685 mi->bank[0].size = (64*1024*1024);
686 }
687
688 #ifdef CONFIG_MACH_CORGI
689 MACHINE_START(CORGI, "SHARP Corgi")
690 .phys_io = 0x40000000,
691 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
692 .fixup = fixup_corgi,
693 .map_io = pxa_map_io,
694 .init_irq = pxa25x_init_irq,
695 .init_machine = corgi_init,
696 .timer = &pxa_timer,
697 MACHINE_END
698 #endif
699
700 #ifdef CONFIG_MACH_SHEPHERD
701 MACHINE_START(SHEPHERD, "SHARP Shepherd")
702 .phys_io = 0x40000000,
703 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
704 .fixup = fixup_corgi,
705 .map_io = pxa_map_io,
706 .init_irq = pxa25x_init_irq,
707 .init_machine = corgi_init,
708 .timer = &pxa_timer,
709 MACHINE_END
710 #endif
711
712 #ifdef CONFIG_MACH_HUSKY
713 MACHINE_START(HUSKY, "SHARP Husky")
714 .phys_io = 0x40000000,
715 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
716 .fixup = fixup_corgi,
717 .map_io = pxa_map_io,
718 .init_irq = pxa25x_init_irq,
719 .init_machine = corgi_init,
720 .timer = &pxa_timer,
721 MACHINE_END
722 #endif
723
This page took 0.045911 seconds and 5 git commands to generate.