projects / deliverable / linux.git / blob
? search:


50d5939a78f1bdc8f318f08360243626a14a6105
[deliverable/linux.git] / arch / arm / mach-pxa / cpufreq-pxa2xx.c
1 /*
2 * linux/arch/arm/mach-pxa/cpufreq-pxa2xx.c
3 *
4 * Copyright (C) 2002,2003 Intrinsyc Software
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 *
20 * History:
21 * 31-Jul-2002 : Initial version [FB]
22 * 29-Jan-2003 : added PXA255 support [FB]
23 * 20-Apr-2003 : ported to v2.5 (Dustin McIntire, Sensoria Corp.)
24 *
25 * Note:
26 * This driver may change the memory bus clock rate, but will not do any
27 * platform specific access timing changes... for example if you have flash
28 * memory connected to CS0, you will need to register a platform specific
29 * notifier which will adjust the memory access strobes to maintain a
30 * minimum strobe width.
31 *
32 */
33
34 #include <linux/kernel.h>
35 #include <linux/module.h>
36 #include <linux/sched.h>
37 #include <linux/init.h>
38 #include <linux/cpufreq.h>
39 #include <linux/err.h>
40 #include <linux/regulator/consumer.h>
41
42 #include <mach/pxa2xx-regs.h>
43
44 #ifdef DEBUG
45 static unsigned int freq_debug;
46 module_param(freq_debug, uint, 0);
47 MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
48 #else
49 #define freq_debug 0
50 #endif
51
52 static struct regulator *vcc_core;
53
54 static unsigned int pxa27x_maxfreq;
55 module_param(pxa27x_maxfreq, uint, 0);
56 MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz"
57 "(typically 624=>pxa270, 416=>pxa271, 520=>pxa272)");
58
59 typedef struct {
60 unsigned int khz;
61 unsigned int membus;
62 unsigned int cccr;
63 unsigned int div2;
64 unsigned int cclkcfg;
65 int vmin;
66 int vmax;
67 } pxa_freqs_t;
68
69 /* Define the refresh period in mSec for the SDRAM and the number of rows */
70 #define SDRAM_TREF 64 /* standard 64ms SDRAM */
71 static unsigned int sdram_rows;
72
73 #define CCLKCFG_TURBO 0x1
74 #define CCLKCFG_FCS 0x2
75 #define CCLKCFG_HALFTURBO 0x4
76 #define CCLKCFG_FASTBUS 0x8
77 #define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2)
78 #define MDREFR_DRI_MASK 0xFFF
79
80 #define MDCNFG_DRAC2(mdcnfg) (((mdcnfg) >> 21) & 0x3)
81 #define MDCNFG_DRAC0(mdcnfg) (((mdcnfg) >> 5) & 0x3)
82
83 /*
84 * PXA255 definitions
85 */
86 /* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */
87 #define CCLKCFG CCLKCFG_TURBO | CCLKCFG_FCS
88
89 static pxa_freqs_t pxa255_run_freqs[] =
90 {
91 /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */
92 { 99500, 99500, 0x121, 1, CCLKCFG, -1, -1}, /* 99, 99, 50, 50 */
93 {132700, 132700, 0x123, 1, CCLKCFG, -1, -1}, /* 133, 133, 66, 66 */
94 {199100, 99500, 0x141, 0, CCLKCFG, -1, -1}, /* 199, 199, 99, 99 */
95 {265400, 132700, 0x143, 1, CCLKCFG, -1, -1}, /* 265, 265, 133, 66 */
96 {331800, 165900, 0x145, 1, CCLKCFG, -1, -1}, /* 331, 331, 166, 83 */
97 {398100, 99500, 0x161, 0, CCLKCFG, -1, -1}, /* 398, 398, 196, 99 */
98 };
99
100 /* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
101 static pxa_freqs_t pxa255_turbo_freqs[] =
102 {
103 /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */
104 { 99500, 99500, 0x121, 1, CCLKCFG, -1, -1}, /* 99, 99, 50, 50 */
105 {199100, 99500, 0x221, 0, CCLKCFG, -1, -1}, /* 99, 199, 50, 99 */
106 {298500, 99500, 0x321, 0, CCLKCFG, -1, -1}, /* 99, 287, 50, 99 */
107 {298600, 99500, 0x1c1, 0, CCLKCFG, -1, -1}, /* 199, 287, 99, 99 */
108 {398100, 99500, 0x241, 0, CCLKCFG, -1, -1}, /* 199, 398, 99, 99 */
109 };
110
111 #define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
112 #define NUM_PXA25x_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs)
113
114 static struct cpufreq_frequency_table
115 pxa255_run_freq_table[NUM_PXA25x_RUN_FREQS+1];
116 static struct cpufreq_frequency_table
117 pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1];
118
119 static unsigned int pxa255_turbo_table;
120 module_param(pxa255_turbo_table, uint, 0);
121 MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table, !0 = turbo table)");
122
123 /*
124 * PXA270 definitions
125 *
126 * For the PXA27x:
127 * Control variables are A, L, 2N for CCCR; B, HT, T for CLKCFG.
128 *
129 * A = 0 => memory controller clock from table 3-7,
130 * A = 1 => memory controller clock = system bus clock
131 * Run mode frequency = 13 MHz * L
132 * Turbo mode frequency = 13 MHz * L * N
133 * System bus frequency = 13 MHz * L / (B + 1)
134 *
135 * In CCCR:
136 * A = 1
137 * L = 16 oscillator to run mode ratio
138 * 2N = 6 2 * (turbo mode to run mode ratio)
139 *
140 * In CCLKCFG:
141 * B = 1 Fast bus mode
142 * HT = 0 Half-Turbo mode
143 * T = 1 Turbo mode
144 *
145 * For now, just support some of the combinations in table 3-7 of
146 * PXA27x Processor Family Developer's Manual to simplify frequency
147 * change sequences.
148 */
149 #define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L)
150 #define CCLKCFG2(B, HT, T) \
151 (CCLKCFG_FCS | \
152 ((B) ? CCLKCFG_FASTBUS : 0) | \
153 ((HT) ? CCLKCFG_HALFTURBO : 0) | \
154 ((T) ? CCLKCFG_TURBO : 0))
155
156 static pxa_freqs_t pxa27x_freqs[] = {
157 {104000, 104000, PXA27x_CCCR(1, 8, 2), 0, CCLKCFG2(1, 0, 1), 900000, 1705000 },
158 {156000, 104000, PXA27x_CCCR(1, 8, 3), 0, CCLKCFG2(1, 0, 1), 1000000, 1705000 },
159 {208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 },
160 {312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 },
161 {416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 },
162 {520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1), 1450000, 1705000 },
163 {624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1), 1550000, 1705000 }
164 };
165
166 #define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs)
167 static struct cpufreq_frequency_table
168 pxa27x_freq_table[NUM_PXA27x_FREQS+1];
169
170 extern unsigned get_clk_frequency_khz(int info);
171
172 #ifdef CONFIG_REGULATOR
173
174 static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq)
175 {
176 int ret = 0;
177 int vmin, vmax;
178
179 if (!cpu_is_pxa27x())
180 return 0;
181
182 vmin = pxa_freq->vmin;
183 vmax = pxa_freq->vmax;
184 if ((vmin == -1) || (vmax == -1))
185 return 0;
186
187 ret = regulator_set_voltage(vcc_core, vmin, vmax);
188 if (ret)
189 pr_err("cpufreq: Failed to set vcc_core in [%dmV..%dmV]\n",
190 vmin, vmax);
191 return ret;
192 }
193
194 static __init void pxa_cpufreq_init_voltages(void)
195 {
196 vcc_core = regulator_get(NULL, "vcc_core");
197 if (IS_ERR(vcc_core)) {
198 pr_info("cpufreq: Didn't find vcc_core regulator\n");
199 vcc_core = NULL;
200 } else {
201 pr_info("cpufreq: Found vcc_core regulator\n");
202 }
203 }
204 #else
205 static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq)
206 {
207 return 0;
208 }
209
210 static __init void pxa_cpufreq_init_voltages(void) { }
211 #endif
212
213 static void find_freq_tables(struct cpufreq_frequency_table **freq_table,
214 pxa_freqs_t **pxa_freqs)
215 {
216 if (cpu_is_pxa25x()) {
217 if (!pxa255_turbo_table) {
218 *pxa_freqs = pxa255_run_freqs;
219 *freq_table = pxa255_run_freq_table;
220 } else {
221 *pxa_freqs = pxa255_turbo_freqs;
222 *freq_table = pxa255_turbo_freq_table;
223 }
224 }
225 if (cpu_is_pxa27x()) {
226 *pxa_freqs = pxa27x_freqs;
227 *freq_table = pxa27x_freq_table;
228 }
229 }
230
231 static void pxa27x_guess_max_freq(void)
232 {
233 if (!pxa27x_maxfreq) {
234 pxa27x_maxfreq = 416000;
235 printk(KERN_INFO "PXA CPU 27x max frequency not defined "
236 "(pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n",
237 pxa27x_maxfreq);
238 } else {
239 pxa27x_maxfreq *= 1000;
240 }
241 }
242
243 static void init_sdram_rows(void)
244 {
245 uint32_t mdcnfg = MDCNFG;
246 unsigned int drac2 = 0, drac0 = 0;
247
248 if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
249 drac2 = MDCNFG_DRAC2(mdcnfg);
250
251 if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1))
252 drac0 = MDCNFG_DRAC0(mdcnfg);
253
254 sdram_rows = 1 << (11 + max(drac0, drac2));
255 }
256
257 static u32 mdrefr_dri(unsigned int freq)
258 {
259 u32 interval = freq * SDRAM_TREF / sdram_rows;
260
261 return (interval - (cpu_is_pxa27x() ? 31 : 0)) / 32;
262 }
263
264 /* find a valid frequency point */
265 static int pxa_verify_policy(struct cpufreq_policy *policy)
266 {
267 struct cpufreq_frequency_table *pxa_freqs_table;
268 pxa_freqs_t *pxa_freqs;
269 int ret;
270
271 find_freq_tables(&pxa_freqs_table, &pxa_freqs);
272 ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table);
273
274 if (freq_debug)
275 pr_debug("Verified CPU policy: %dKhz min to %dKhz max\n",
276 policy->min, policy->max);
277
278 return ret;
279 }
280
281 static unsigned int pxa_cpufreq_get(unsigned int cpu)
282 {
283 return get_clk_frequency_khz(0);
284 }
285
286 static int pxa_set_target(struct cpufreq_policy *policy,
287 unsigned int target_freq,
288 unsigned int relation)
289 {
290 struct cpufreq_frequency_table *pxa_freqs_table;
291 pxa_freqs_t *pxa_freq_settings;
292 struct cpufreq_freqs freqs;
293 unsigned int idx;
294 unsigned long flags;
295 unsigned int new_freq_cpu, new_freq_mem;
296 unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
297 int ret = 0;
298
299 /* Get the current policy */
300 find_freq_tables(&pxa_freqs_table, &pxa_freq_settings);
301
302 /* Lookup the next frequency */
303 if (cpufreq_frequency_table_target(policy, pxa_freqs_table,
304 target_freq, relation, &idx)) {
305 return -EINVAL;
306 }
307
308 new_freq_cpu = pxa_freq_settings[idx].khz;
309 new_freq_mem = pxa_freq_settings[idx].membus;
310 freqs.old = policy->cur;
311 freqs.new = new_freq_cpu;
312 freqs.cpu = policy->cpu;
313
314 if (freq_debug)
315 pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, "
316 "(SDRAM %d Mhz)\n",
317 freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
318 (new_freq_mem / 2000) : (new_freq_mem / 1000));
319
320 if (vcc_core && freqs.new > freqs.old)
321 ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
322 if (ret)
323 return ret;
324 /*
325 * Tell everyone what we're about to do...
326 * you should add a notify client with any platform specific
327 * Vcc changing capability
328 */
329 cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
330
331 /* Calculate the next MDREFR. If we're slowing down the SDRAM clock
332 * we need to preset the smaller DRI before the change. If we're
333 * speeding up we need to set the larger DRI value after the change.
334 */
335 preset_mdrefr = postset_mdrefr = MDREFR;
336 if ((MDREFR & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
337 preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK);
338 preset_mdrefr |= mdrefr_dri(new_freq_mem);
339 }
340 postset_mdrefr =
341 (postset_mdrefr & ~MDREFR_DRI_MASK) | mdrefr_dri(new_freq_mem);
342
343 /* If we're dividing the memory clock by two for the SDRAM clock, this
344 * must be set prior to the change. Clearing the divide must be done
345 * after the change.
346 */
347 if (pxa_freq_settings[idx].div2) {
348 preset_mdrefr |= MDREFR_DB2_MASK;
349 postset_mdrefr |= MDREFR_DB2_MASK;
350 } else {
351 postset_mdrefr &= ~MDREFR_DB2_MASK;
352 }
353
354 local_irq_save(flags);
355
356 /* Set new the CCCR and prepare CCLKCFG */
357 CCCR = pxa_freq_settings[idx].cccr;
358 cclkcfg = pxa_freq_settings[idx].cclkcfg;
359
360 asm volatile(" \n\
361 ldr r4, [%1] /* load MDREFR */ \n\
362 b 2f \n\
363 .align 5 \n\
364 1: \n\
365 str %3, [%1] /* preset the MDREFR */ \n\
366 mcr p14, 0, %2, c6, c0, 0 /* set CCLKCFG[FCS] */ \n\
367 str %4, [%1] /* postset the MDREFR */ \n\
368 \n\
369 b 3f \n\
370 2: b 1b \n\
371 3: nop \n\
372 "
373 : "=&r" (unused)
374 : "r" (&MDREFR), "r" (cclkcfg),
375 "r" (preset_mdrefr), "r" (postset_mdrefr)
376 : "r4", "r5");
377 local_irq_restore(flags);
378
379 /*
380 * Tell everyone what we've just done...
381 * you should add a notify client with any platform specific
382 * SDRAM refresh timer adjustments
383 */
384 cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
385
386 /*
387 * Even if voltage setting fails, we don't report it, as the frequency
388 * change succeeded. The voltage reduction is not a critical failure,
389 * only power savings will suffer from this.
390 *
391 * Note: if the voltage change fails, and a return value is returned, a
392 * bug is triggered (seems a deadlock). Should anybody find out where,
393 * the "return 0" should become a "return ret".
394 */
395 if (vcc_core && freqs.new < freqs.old)
396 ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
397
398 return 0;
399 }
400
401 static int pxa_cpufreq_init(struct cpufreq_policy *policy)
402 {
403 int i;
404 unsigned int freq;
405 struct cpufreq_frequency_table *pxa255_freq_table;
406 pxa_freqs_t *pxa255_freqs;
407
408 /* try to guess pxa27x cpu */
409 if (cpu_is_pxa27x())
410 pxa27x_guess_max_freq();
411
412 pxa_cpufreq_init_voltages();
413
414 init_sdram_rows();
415
416 /* set default policy and cpuinfo */
417 policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
418 policy->cur = get_clk_frequency_khz(0); /* current freq */
419 policy->min = policy->max = policy->cur;
420
421 /* Generate pxa25x the run cpufreq_frequency_table struct */
422 for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) {
423 pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz;
424 pxa255_run_freq_table[i].index = i;
425 }
426 pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END;
427
428 /* Generate pxa25x the turbo cpufreq_frequency_table struct */
429 for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) {
430 pxa255_turbo_freq_table[i].frequency =
431 pxa255_turbo_freqs[i].khz;
432 pxa255_turbo_freq_table[i].index = i;
433 }
434 pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
435
436 pxa255_turbo_table = !!pxa255_turbo_table;
437
438 /* Generate the pxa27x cpufreq_frequency_table struct */
439 for (i = 0; i < NUM_PXA27x_FREQS; i++) {
440 freq = pxa27x_freqs[i].khz;
441 if (freq > pxa27x_maxfreq)
442 break;
443 pxa27x_freq_table[i].frequency = freq;
444 pxa27x_freq_table[i].index = i;
445 }
446 pxa27x_freq_table[i].index = i;
447 pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END;
448
449 /*
450 * Set the policy's minimum and maximum frequencies from the tables
451 * just constructed. This sets cpuinfo.mxx_freq, min and max.
452 */
453 if (cpu_is_pxa25x()) {
454 find_freq_tables(&pxa255_freq_table, &pxa255_freqs);
455 pr_info("PXA255 cpufreq using %s frequency table\n",
456 pxa255_turbo_table ? "turbo" : "run");
457 cpufreq_frequency_table_cpuinfo(policy, pxa255_freq_table);
458 }
459 else if (cpu_is_pxa27x())
460 cpufreq_frequency_table_cpuinfo(policy, pxa27x_freq_table);
461
462 printk(KERN_INFO "PXA CPU frequency change support initialized\n");
463
464 return 0;
465 }
466
467 static struct cpufreq_driver pxa_cpufreq_driver = {
468 .verify = pxa_verify_policy,
469 .target = pxa_set_target,
470 .init = pxa_cpufreq_init,
471 .get = pxa_cpufreq_get,
472 .name = "PXA2xx",
473 };
474
475 static int __init pxa_cpu_init(void)
476 {
477 int ret = -ENODEV;
478 if (cpu_is_pxa25x() || cpu_is_pxa27x())
479 ret = cpufreq_register_driver(&pxa_cpufreq_driver);
480 return ret;
481 }
482
483 static void __exit pxa_cpu_exit(void)
484 {
485 cpufreq_unregister_driver(&pxa_cpufreq_driver);
486 }
487
488
489 MODULE_AUTHOR("Intrinsyc Software Inc.");
490 MODULE_DESCRIPTION("CPU frequency changing driver for the PXA architecture");
491 MODULE_LICENSE("GPL");
492 module_init(pxa_cpu_init);
493 module_exit(pxa_cpu_exit);
Linux kernel - Deliverables
This page took 0.052415 seconds and 4 git commands to generate.