ARM: pxa: Transition pxa25x, pxa27x, pxa3xx to clk framework
[deliverable/linux.git] / arch / arm / mach-pxa / tosa.c
1 /*
2 * Support for Sharp SL-C6000x PDAs
3 * Model: (Tosa)
4 *
5 * Copyright (c) 2005 Dirk Opfer
6 *
7 * Based on code written by Sharp/Lineo for 2.4 kernels
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 *
13 */
14
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/major.h>
19 #include <linux/fs.h>
20 #include <linux/interrupt.h>
21 #include <linux/delay.h>
22 #include <linux/fb.h>
23 #include <linux/mmc/host.h>
24 #include <linux/mfd/tc6393xb.h>
25 #include <linux/mfd/tmio.h>
26 #include <linux/mtd/nand.h>
27 #include <linux/mtd/partitions.h>
28 #include <linux/mtd/physmap.h>
29 #include <linux/pm.h>
30 #include <linux/gpio_keys.h>
31 #include <linux/input.h>
32 #include <linux/gpio.h>
33 #include <linux/power/gpio-charger.h>
34 #include <linux/spi/spi.h>
35 #include <linux/spi/pxa2xx_spi.h>
36 #include <linux/input/matrix_keypad.h>
37 #include <linux/i2c/pxa-i2c.h>
38 #include <linux/usb/gpio_vbus.h>
39 #include <linux/reboot.h>
40 #include <linux/memblock.h>
41
42 #include <asm/setup.h>
43 #include <asm/mach-types.h>
44
45 #include <mach/pxa25x.h>
46 #include <mach/reset.h>
47 #include <linux/platform_data/irda-pxaficp.h>
48 #include <linux/platform_data/mmc-pxamci.h>
49 #include <mach/udc.h>
50 #include <mach/tosa_bt.h>
51 #include <mach/audio.h>
52 #include <mach/smemc.h>
53
54 #include <asm/mach/arch.h>
55 #include <mach/tosa.h>
56
57 #include <asm/hardware/scoop.h>
58 #include <asm/mach/sharpsl_param.h>
59
60 #include "generic.h"
61 #include "devices.h"
62
63 static unsigned long tosa_pin_config[] = {
64 GPIO78_nCS_2, /* Scoop */
65 GPIO80_nCS_4, /* tg6393xb */
66 GPIO33_nCS_5, /* Scoop */
67
68 // GPIO76 CARD_VCC_ON1
69
70 GPIO19_GPIO, /* Reset out */
71 GPIO1_RST | WAKEUP_ON_EDGE_FALL,
72
73 GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* WAKE_UP */
74 GPIO2_GPIO | WAKEUP_ON_EDGE_BOTH, /* AC_IN */
75 GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* RECORD */
76 GPIO4_GPIO | WAKEUP_ON_EDGE_FALL, /* SYNC */
77 GPIO20_GPIO, /* EAR_IN */
78 GPIO22_GPIO, /* On */
79
80 GPIO5_GPIO, /* USB_IN */
81 GPIO32_GPIO, /* Pen IRQ */
82
83 GPIO7_GPIO, /* Jacket Detect */
84 GPIO14_GPIO, /* BAT0_CRG */
85 GPIO12_GPIO, /* BAT1_CRG */
86 GPIO17_GPIO, /* BAT0_LOW */
87 GPIO84_GPIO, /* BAT1_LOW */
88 GPIO38_GPIO, /* BAT_LOCK */
89
90 GPIO11_3_6MHz,
91 GPIO15_GPIO, /* TC6393XB IRQ */
92 GPIO18_RDY,
93 GPIO27_GPIO, /* LCD Sync */
94
95 /* MMC */
96 GPIO6_MMC_CLK,
97 GPIO8_MMC_CS0,
98 GPIO9_GPIO, /* Detect */
99 GPIO10_GPIO, /* nSD_INT */
100
101 /* CF */
102 GPIO13_GPIO, /* CD_IRQ */
103 GPIO21_GPIO, /* Main Slot IRQ */
104 GPIO36_GPIO, /* Jacket Slot IRQ */
105 GPIO48_nPOE,
106 GPIO49_nPWE,
107 GPIO50_nPIOR,
108 GPIO51_nPIOW,
109 GPIO52_nPCE_1,
110 GPIO53_nPCE_2,
111 GPIO54_nPSKTSEL,
112 GPIO55_nPREG,
113 GPIO56_nPWAIT,
114 GPIO57_nIOIS16,
115
116 /* AC97 */
117 GPIO31_AC97_SYNC,
118 GPIO30_AC97_SDATA_OUT,
119 GPIO28_AC97_BITCLK,
120 GPIO29_AC97_SDATA_IN_0,
121 // GPIO79 nAUD_IRQ
122
123 /* FFUART */
124 GPIO34_FFUART_RXD,
125 GPIO35_FFUART_CTS,
126 GPIO37_FFUART_DSR,
127 GPIO39_FFUART_TXD,
128 GPIO40_FFUART_DTR,
129 GPIO41_FFUART_RTS,
130
131 /* BTUART */
132 GPIO42_BTUART_RXD,
133 GPIO43_BTUART_TXD,
134 GPIO44_BTUART_CTS,
135 GPIO45_BTUART_RTS,
136
137 /* Keybd */
138 GPIO58_GPIO | MFP_LPM_DRIVE_LOW, /* Column 0 */
139 GPIO59_GPIO | MFP_LPM_DRIVE_LOW, /* Column 1 */
140 GPIO60_GPIO | MFP_LPM_DRIVE_LOW, /* Column 2 */
141 GPIO61_GPIO | MFP_LPM_DRIVE_LOW, /* Column 3 */
142 GPIO62_GPIO | MFP_LPM_DRIVE_LOW, /* Column 4 */
143 GPIO63_GPIO | MFP_LPM_DRIVE_LOW, /* Column 5 */
144 GPIO64_GPIO | MFP_LPM_DRIVE_LOW, /* Column 6 */
145 GPIO65_GPIO | MFP_LPM_DRIVE_LOW, /* Column 7 */
146 GPIO66_GPIO | MFP_LPM_DRIVE_LOW, /* Column 8 */
147 GPIO67_GPIO | MFP_LPM_DRIVE_LOW, /* Column 9 */
148 GPIO68_GPIO | MFP_LPM_DRIVE_LOW, /* Column 10 */
149 GPIO69_GPIO | MFP_LPM_DRIVE_LOW, /* Row 0 */
150 GPIO70_GPIO | MFP_LPM_DRIVE_LOW, /* Row 1 */
151 GPIO71_GPIO | MFP_LPM_DRIVE_LOW, /* Row 2 */
152 GPIO72_GPIO | MFP_LPM_DRIVE_LOW, /* Row 3 */
153 GPIO73_GPIO | MFP_LPM_DRIVE_LOW, /* Row 4 */
154 GPIO74_GPIO | MFP_LPM_DRIVE_LOW, /* Row 5 */
155 GPIO75_GPIO | MFP_LPM_DRIVE_LOW, /* Row 6 */
156
157 /* SPI */
158 GPIO81_SSP2_CLK_OUT,
159 GPIO82_SSP2_FRM_OUT,
160 GPIO83_SSP2_TXD,
161
162 /* IrDA is managed in other way */
163 GPIO46_GPIO,
164 GPIO47_GPIO,
165 };
166
167 /*
168 * SCOOP Device
169 */
170 static struct resource tosa_scoop_resources[] = {
171 [0] = {
172 .start = TOSA_CF_PHYS,
173 .end = TOSA_CF_PHYS + 0xfff,
174 .flags = IORESOURCE_MEM,
175 },
176 };
177
178 static struct scoop_config tosa_scoop_setup = {
179 .io_dir = TOSA_SCOOP_IO_DIR,
180 .gpio_base = TOSA_SCOOP_GPIO_BASE,
181 };
182
183 static struct platform_device tosascoop_device = {
184 .name = "sharp-scoop",
185 .id = 0,
186 .dev = {
187 .platform_data = &tosa_scoop_setup,
188 },
189 .num_resources = ARRAY_SIZE(tosa_scoop_resources),
190 .resource = tosa_scoop_resources,
191 };
192
193
194 /*
195 * SCOOP Device Jacket
196 */
197 static struct resource tosa_scoop_jc_resources[] = {
198 [0] = {
199 .start = TOSA_SCOOP_PHYS + 0x40,
200 .end = TOSA_SCOOP_PHYS + 0xfff,
201 .flags = IORESOURCE_MEM,
202 },
203 };
204
205 static struct scoop_config tosa_scoop_jc_setup = {
206 .io_dir = TOSA_SCOOP_JC_IO_DIR,
207 .gpio_base = TOSA_SCOOP_JC_GPIO_BASE,
208 };
209
210 static struct platform_device tosascoop_jc_device = {
211 .name = "sharp-scoop",
212 .id = 1,
213 .dev = {
214 .platform_data = &tosa_scoop_jc_setup,
215 .parent = &tosascoop_device.dev,
216 },
217 .num_resources = ARRAY_SIZE(tosa_scoop_jc_resources),
218 .resource = tosa_scoop_jc_resources,
219 };
220
221 /*
222 * PCMCIA
223 */
224 static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = {
225 {
226 .dev = &tosascoop_device.dev,
227 .irq = TOSA_IRQ_GPIO_CF_IRQ,
228 .cd_irq = TOSA_IRQ_GPIO_CF_CD,
229 .cd_irq_str = "PCMCIA0 CD",
230 },{
231 .dev = &tosascoop_jc_device.dev,
232 .irq = TOSA_IRQ_GPIO_JC_CF_IRQ,
233 .cd_irq = -1,
234 },
235 };
236
237 static struct scoop_pcmcia_config tosa_pcmcia_config = {
238 .devs = &tosa_pcmcia_scoop[0],
239 .num_devs = 2,
240 };
241
242 /*
243 * USB Device Controller
244 */
245 static struct gpio_vbus_mach_info tosa_udc_info = {
246 .gpio_pullup = TOSA_GPIO_USB_PULLUP,
247 .gpio_vbus = TOSA_GPIO_USB_IN,
248 .gpio_vbus_inverted = 1,
249 };
250
251 static struct platform_device tosa_gpio_vbus = {
252 .name = "gpio-vbus",
253 .id = -1,
254 .dev = {
255 .platform_data = &tosa_udc_info,
256 },
257 };
258
259 /*
260 * MMC/SD Device
261 */
262 static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void *data)
263 {
264 int err;
265
266 err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int");
267 if (err) {
268 printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
269 goto err_gpio_int;
270 }
271 err = gpio_direction_input(TOSA_GPIO_nSD_INT);
272 if (err)
273 goto err_gpio_int_dir;
274
275 return 0;
276
277 err_gpio_int_dir:
278 gpio_free(TOSA_GPIO_nSD_INT);
279 err_gpio_int:
280 return err;
281 }
282
283 static void tosa_mci_exit(struct device *dev, void *data)
284 {
285 gpio_free(TOSA_GPIO_nSD_INT);
286 }
287
288 static struct pxamci_platform_data tosa_mci_platform_data = {
289 .detect_delay_ms = 250,
290 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
291 .init = tosa_mci_init,
292 .exit = tosa_mci_exit,
293 .gpio_card_detect = TOSA_GPIO_nSD_DETECT,
294 .gpio_card_ro = TOSA_GPIO_SD_WP,
295 .gpio_power = TOSA_GPIO_PWR_ON,
296 };
297
298 /*
299 * Irda
300 */
301 static void tosa_irda_transceiver_mode(struct device *dev, int mode)
302 {
303 if (mode & IR_OFF) {
304 gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0);
305 pxa2xx_transceiver_mode(dev, mode);
306 gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
307 } else {
308 pxa2xx_transceiver_mode(dev, mode);
309 gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1);
310 }
311 }
312
313 static int tosa_irda_startup(struct device *dev)
314 {
315 int ret;
316
317 ret = gpio_request(TOSA_GPIO_IRDA_TX, "IrDA TX");
318 if (ret)
319 goto err_tx;
320 ret = gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
321 if (ret)
322 goto err_tx_dir;
323
324 ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown");
325 if (ret)
326 goto err_pwr;
327
328 ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0);
329 if (ret)
330 goto err_pwr_dir;
331
332 tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
333
334 return 0;
335
336 err_pwr_dir:
337 gpio_free(TOSA_GPIO_IR_POWERDWN);
338 err_pwr:
339 err_tx_dir:
340 gpio_free(TOSA_GPIO_IRDA_TX);
341 err_tx:
342 return ret;
343 }
344
345 static void tosa_irda_shutdown(struct device *dev)
346 {
347 tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
348 gpio_free(TOSA_GPIO_IR_POWERDWN);
349 gpio_free(TOSA_GPIO_IRDA_TX);
350 }
351
352 static struct pxaficp_platform_data tosa_ficp_platform_data = {
353 .gpio_pwdown = -1,
354 .transceiver_cap = IR_SIRMODE | IR_OFF,
355 .transceiver_mode = tosa_irda_transceiver_mode,
356 .startup = tosa_irda_startup,
357 .shutdown = tosa_irda_shutdown,
358 };
359
360 /*
361 * Tosa AC IN
362 */
363 static char *tosa_ac_supplied_to[] = {
364 "main-battery",
365 "backup-battery",
366 "jacket-battery",
367 };
368
369 static struct gpio_charger_platform_data tosa_power_data = {
370 .name = "charger",
371 .type = POWER_SUPPLY_TYPE_MAINS,
372 .gpio = TOSA_GPIO_AC_IN,
373 .gpio_active_low = 1,
374 .supplied_to = tosa_ac_supplied_to,
375 .num_supplicants = ARRAY_SIZE(tosa_ac_supplied_to),
376 };
377
378 static struct resource tosa_power_resource[] = {
379 {
380 .name = "ac",
381 .start = PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN),
382 .end = PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN),
383 .flags = IORESOURCE_IRQ |
384 IORESOURCE_IRQ_HIGHEDGE |
385 IORESOURCE_IRQ_LOWEDGE,
386 },
387 };
388
389 static struct platform_device tosa_power_device = {
390 .name = "gpio-charger",
391 .id = -1,
392 .dev.platform_data = &tosa_power_data,
393 .resource = tosa_power_resource,
394 .num_resources = ARRAY_SIZE(tosa_power_resource),
395 };
396
397 /*
398 * Tosa Keyboard
399 */
400 static const uint32_t tosakbd_keymap[] = {
401 KEY(0, 1, KEY_W),
402 KEY(0, 5, KEY_K),
403 KEY(0, 6, KEY_BACKSPACE),
404 KEY(0, 7, KEY_P),
405 KEY(1, 0, KEY_Q),
406 KEY(1, 1, KEY_E),
407 KEY(1, 2, KEY_T),
408 KEY(1, 3, KEY_Y),
409 KEY(1, 5, KEY_O),
410 KEY(1, 6, KEY_I),
411 KEY(1, 7, KEY_COMMA),
412 KEY(2, 0, KEY_A),
413 KEY(2, 1, KEY_D),
414 KEY(2, 2, KEY_G),
415 KEY(2, 3, KEY_U),
416 KEY(2, 5, KEY_L),
417 KEY(2, 6, KEY_ENTER),
418 KEY(2, 7, KEY_DOT),
419 KEY(3, 0, KEY_Z),
420 KEY(3, 1, KEY_C),
421 KEY(3, 2, KEY_V),
422 KEY(3, 3, KEY_J),
423 KEY(3, 4, TOSA_KEY_ADDRESSBOOK),
424 KEY(3, 5, TOSA_KEY_CANCEL),
425 KEY(3, 6, TOSA_KEY_CENTER),
426 KEY(3, 7, TOSA_KEY_OK),
427 KEY(3, 8, KEY_LEFTSHIFT),
428 KEY(4, 0, KEY_S),
429 KEY(4, 1, KEY_R),
430 KEY(4, 2, KEY_B),
431 KEY(4, 3, KEY_N),
432 KEY(4, 4, TOSA_KEY_CALENDAR),
433 KEY(4, 5, TOSA_KEY_HOMEPAGE),
434 KEY(4, 6, KEY_LEFTCTRL),
435 KEY(4, 7, TOSA_KEY_LIGHT),
436 KEY(4, 9, KEY_RIGHTSHIFT),
437 KEY(5, 0, KEY_TAB),
438 KEY(5, 1, KEY_SLASH),
439 KEY(5, 2, KEY_H),
440 KEY(5, 3, KEY_M),
441 KEY(5, 4, TOSA_KEY_MENU),
442 KEY(5, 6, KEY_UP),
443 KEY(5, 10, TOSA_KEY_FN),
444 KEY(6, 0, KEY_X),
445 KEY(6, 1, KEY_F),
446 KEY(6, 2, KEY_SPACE),
447 KEY(6, 3, KEY_APOSTROPHE),
448 KEY(6, 4, TOSA_KEY_MAIL),
449 KEY(6, 5, KEY_LEFT),
450 KEY(6, 6, KEY_DOWN),
451 KEY(6, 7, KEY_RIGHT),
452 };
453
454 static struct matrix_keymap_data tosakbd_keymap_data = {
455 .keymap = tosakbd_keymap,
456 .keymap_size = ARRAY_SIZE(tosakbd_keymap),
457 };
458
459 static const int tosakbd_col_gpios[] =
460 { 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68 };
461 static const int tosakbd_row_gpios[] =
462 { 69, 70, 71, 72, 73, 74, 75 };
463
464 static struct matrix_keypad_platform_data tosakbd_pdata = {
465 .keymap_data = &tosakbd_keymap_data,
466 .row_gpios = tosakbd_row_gpios,
467 .col_gpios = tosakbd_col_gpios,
468 .num_row_gpios = ARRAY_SIZE(tosakbd_row_gpios),
469 .num_col_gpios = ARRAY_SIZE(tosakbd_col_gpios),
470 .col_scan_delay_us = 10,
471 .debounce_ms = 10,
472 .wakeup = 1,
473 };
474
475 static struct platform_device tosakbd_device = {
476 .name = "matrix-keypad",
477 .id = -1,
478 .dev = {
479 .platform_data = &tosakbd_pdata,
480 },
481 };
482
483 static struct gpio_keys_button tosa_gpio_keys[] = {
484 /*
485 * Two following keys are directly tied to "ON" button of tosa. Why?
486 * The first one can be used as a wakeup source, the second can't;
487 * also the first one is OR of ac_powered and on_button.
488 */
489 {
490 .type = EV_PWR,
491 .code = KEY_RESERVED,
492 .gpio = TOSA_GPIO_POWERON,
493 .desc = "Poweron",
494 .wakeup = 1,
495 .active_low = 1,
496 },
497 {
498 .type = EV_PWR,
499 .code = KEY_SUSPEND,
500 .gpio = TOSA_GPIO_ON_KEY,
501 .desc = "On key",
502 /*
503 * can't be used as wakeup
504 * .wakeup = 1,
505 */
506 .active_low = 1,
507 },
508 {
509 .type = EV_KEY,
510 .code = TOSA_KEY_RECORD,
511 .gpio = TOSA_GPIO_RECORD_BTN,
512 .desc = "Record Button",
513 .wakeup = 1,
514 .active_low = 1,
515 },
516 {
517 .type = EV_KEY,
518 .code = TOSA_KEY_SYNC,
519 .gpio = TOSA_GPIO_SYNC,
520 .desc = "Sync Button",
521 .wakeup = 1,
522 .active_low = 1,
523 },
524 {
525 .type = EV_SW,
526 .code = SW_HEADPHONE_INSERT,
527 .gpio = TOSA_GPIO_EAR_IN,
528 .desc = "HeadPhone insert",
529 .active_low = 1,
530 .debounce_interval = 300,
531 },
532 };
533
534 static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = {
535 .buttons = tosa_gpio_keys,
536 .nbuttons = ARRAY_SIZE(tosa_gpio_keys),
537 };
538
539 static struct platform_device tosa_gpio_keys_device = {
540 .name = "gpio-keys",
541 .id = -1,
542 .dev = {
543 .platform_data = &tosa_gpio_keys_platform_data,
544 },
545 };
546
547 /*
548 * Tosa LEDs
549 */
550 static struct gpio_led tosa_gpio_leds[] = {
551 {
552 .name = "tosa:amber:charge",
553 .default_trigger = "main-battery-charging",
554 .gpio = TOSA_GPIO_CHRG_ERR_LED,
555 },
556 {
557 .name = "tosa:green:mail",
558 .default_trigger = "nand-disk",
559 .gpio = TOSA_GPIO_NOTE_LED,
560 },
561 {
562 .name = "tosa:dual:wlan",
563 .default_trigger = "none",
564 .gpio = TOSA_GPIO_WLAN_LED,
565 },
566 {
567 .name = "tosa:blue:bluetooth",
568 .default_trigger = "tosa-bt",
569 .gpio = TOSA_GPIO_BT_LED,
570 },
571 };
572
573 static struct gpio_led_platform_data tosa_gpio_leds_platform_data = {
574 .leds = tosa_gpio_leds,
575 .num_leds = ARRAY_SIZE(tosa_gpio_leds),
576 };
577
578 static struct platform_device tosaled_device = {
579 .name = "leds-gpio",
580 .id = -1,
581 .dev = {
582 .platform_data = &tosa_gpio_leds_platform_data,
583 },
584 };
585
586 /*
587 * Toshiba Mobile IO Controller
588 */
589 static struct resource tc6393xb_resources[] = {
590 [0] = {
591 .start = TOSA_LCDC_PHYS,
592 .end = TOSA_LCDC_PHYS + 0x3ffffff,
593 .flags = IORESOURCE_MEM,
594 },
595
596 [1] = {
597 .start = TOSA_IRQ_GPIO_TC6393XB_INT,
598 .end = TOSA_IRQ_GPIO_TC6393XB_INT,
599 .flags = IORESOURCE_IRQ,
600 },
601 };
602
603
604 static int tosa_tc6393xb_enable(struct platform_device *dev)
605 {
606 int rc;
607
608 rc = gpio_request(TOSA_GPIO_TC6393XB_REST_IN, "tc6393xb #pclr");
609 if (rc)
610 goto err_req_pclr;
611 rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend");
612 if (rc)
613 goto err_req_suspend;
614 rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "tc6393xb l3v");
615 if (rc)
616 goto err_req_l3v;
617 rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0);
618 if (rc)
619 goto err_dir_l3v;
620 rc = gpio_direction_output(TOSA_GPIO_TC6393XB_SUSPEND, 0);
621 if (rc)
622 goto err_dir_suspend;
623 rc = gpio_direction_output(TOSA_GPIO_TC6393XB_REST_IN, 0);
624 if (rc)
625 goto err_dir_pclr;
626
627 mdelay(1);
628
629 gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
630
631 mdelay(10);
632
633 gpio_set_value(TOSA_GPIO_TC6393XB_REST_IN, 1);
634 gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
635
636 return 0;
637 err_dir_pclr:
638 err_dir_suspend:
639 err_dir_l3v:
640 gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
641 err_req_l3v:
642 gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
643 err_req_suspend:
644 gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
645 err_req_pclr:
646 return rc;
647 }
648
649 static int tosa_tc6393xb_disable(struct platform_device *dev)
650 {
651 gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
652 gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
653 gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
654
655 return 0;
656 }
657
658 static int tosa_tc6393xb_resume(struct platform_device *dev)
659 {
660 gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
661 mdelay(10);
662 gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
663 mdelay(10);
664
665 return 0;
666 }
667
668 static int tosa_tc6393xb_suspend(struct platform_device *dev)
669 {
670 gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 0);
671 gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 0);
672 return 0;
673 }
674
675 static struct mtd_partition tosa_nand_partition[] = {
676 {
677 .name = "smf",
678 .offset = 0,
679 .size = 7 * 1024 * 1024,
680 },
681 {
682 .name = "root",
683 .offset = MTDPART_OFS_APPEND,
684 .size = 28 * 1024 * 1024,
685 },
686 {
687 .name = "home",
688 .offset = MTDPART_OFS_APPEND,
689 .size = MTDPART_SIZ_FULL,
690 },
691 };
692
693 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
694
695 static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = {
696 .options = 0,
697 .offs = 4,
698 .len = 2,
699 .pattern = scan_ff_pattern
700 };
701
702 static struct tmio_nand_data tosa_tc6393xb_nand_config = {
703 .num_partitions = ARRAY_SIZE(tosa_nand_partition),
704 .partition = tosa_nand_partition,
705 .badblock_pattern = &tosa_tc6393xb_nand_bbt,
706 };
707
708 static int tosa_tc6393xb_setup(struct platform_device *dev)
709 {
710 int rc;
711
712 rc = gpio_request(TOSA_GPIO_CARD_VCC_ON, "CARD_VCC_ON");
713 if (rc)
714 goto err_req;
715
716 rc = gpio_direction_output(TOSA_GPIO_CARD_VCC_ON, 1);
717 if (rc)
718 goto err_dir;
719
720 return rc;
721
722 err_dir:
723 gpio_free(TOSA_GPIO_CARD_VCC_ON);
724 err_req:
725 return rc;
726 }
727
728 static void tosa_tc6393xb_teardown(struct platform_device *dev)
729 {
730 gpio_free(TOSA_GPIO_CARD_VCC_ON);
731 }
732
733 #ifdef CONFIG_MFD_TC6393XB
734 static struct fb_videomode tosa_tc6393xb_lcd_mode[] = {
735 {
736 .xres = 480,
737 .yres = 640,
738 .pixclock = 0x002cdf00,/* PLL divisor */
739 .left_margin = 0x004c,
740 .right_margin = 0x005b,
741 .upper_margin = 0x0001,
742 .lower_margin = 0x000d,
743 .hsync_len = 0x0002,
744 .vsync_len = 0x0001,
745 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
746 .vmode = FB_VMODE_NONINTERLACED,
747 },{
748 .xres = 240,
749 .yres = 320,
750 .pixclock = 0x00e7f203,/* PLL divisor */
751 .left_margin = 0x0024,
752 .right_margin = 0x002f,
753 .upper_margin = 0x0001,
754 .lower_margin = 0x000d,
755 .hsync_len = 0x0002,
756 .vsync_len = 0x0001,
757 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
758 .vmode = FB_VMODE_NONINTERLACED,
759 }
760 };
761
762 static struct tmio_fb_data tosa_tc6393xb_fb_config = {
763 .lcd_set_power = tc6393xb_lcd_set_power,
764 .lcd_mode = tc6393xb_lcd_mode,
765 .num_modes = ARRAY_SIZE(tosa_tc6393xb_lcd_mode),
766 .modes = &tosa_tc6393xb_lcd_mode[0],
767 .height = 82,
768 .width = 60,
769 };
770 #endif
771
772 static struct tc6393xb_platform_data tosa_tc6393xb_data = {
773 .scr_pll2cr = 0x0cc1,
774 .scr_gper = 0x3300,
775
776 .irq_base = IRQ_BOARD_START,
777 .gpio_base = TOSA_TC6393XB_GPIO_BASE,
778 .setup = tosa_tc6393xb_setup,
779 .teardown = tosa_tc6393xb_teardown,
780
781 .enable = tosa_tc6393xb_enable,
782 .disable = tosa_tc6393xb_disable,
783 .suspend = tosa_tc6393xb_suspend,
784 .resume = tosa_tc6393xb_resume,
785
786 .nand_data = &tosa_tc6393xb_nand_config,
787 #ifdef CONFIG_MFD_TC6393XB
788 .fb_data = &tosa_tc6393xb_fb_config,
789 #endif
790
791 .resume_restore = 1,
792 };
793
794
795 static struct platform_device tc6393xb_device = {
796 .name = "tc6393xb",
797 .id = -1,
798 .dev = {
799 .platform_data = &tosa_tc6393xb_data,
800 },
801 .num_resources = ARRAY_SIZE(tc6393xb_resources),
802 .resource = tc6393xb_resources,
803 };
804
805 static struct tosa_bt_data tosa_bt_data = {
806 .gpio_pwr = TOSA_GPIO_BT_PWR_EN,
807 .gpio_reset = TOSA_GPIO_BT_RESET,
808 };
809
810 static struct platform_device tosa_bt_device = {
811 .name = "tosa-bt",
812 .id = -1,
813 .dev.platform_data = &tosa_bt_data,
814 };
815
816 static struct pxa2xx_spi_master pxa_ssp_master_info = {
817 .num_chipselect = 1,
818 };
819
820 static struct spi_board_info spi_board_info[] __initdata = {
821 {
822 .modalias = "tosa-lcd",
823 // .platform_data
824 .max_speed_hz = 28750,
825 .bus_num = 2,
826 .chip_select = 0,
827 .mode = SPI_MODE_0,
828 },
829 };
830
831 static struct mtd_partition sharpsl_rom_parts[] = {
832 {
833 .name ="Boot PROM Filesystem",
834 .offset = 0x00160000,
835 .size = MTDPART_SIZ_FULL,
836 },
837 };
838
839 static struct physmap_flash_data sharpsl_rom_data = {
840 .width = 2,
841 .nr_parts = ARRAY_SIZE(sharpsl_rom_parts),
842 .parts = sharpsl_rom_parts,
843 };
844
845 static struct resource sharpsl_rom_resources[] = {
846 {
847 .start = 0x00000000,
848 .end = 0x007fffff,
849 .flags = IORESOURCE_MEM,
850 },
851 };
852
853 static struct platform_device sharpsl_rom_device = {
854 .name = "physmap-flash",
855 .id = -1,
856 .resource = sharpsl_rom_resources,
857 .num_resources = ARRAY_SIZE(sharpsl_rom_resources),
858 .dev.platform_data = &sharpsl_rom_data,
859 };
860
861 static struct platform_device wm9712_device = {
862 .name = "wm9712-codec",
863 .id = -1,
864 };
865
866 static struct platform_device tosa_audio_device = {
867 .name = "tosa-audio",
868 .id = -1,
869 };
870
871 static struct platform_device *devices[] __initdata = {
872 &tosascoop_device,
873 &tosascoop_jc_device,
874 &tc6393xb_device,
875 &tosa_power_device,
876 &tosakbd_device,
877 &tosa_gpio_keys_device,
878 &tosaled_device,
879 &tosa_bt_device,
880 &sharpsl_rom_device,
881 &wm9712_device,
882 &tosa_gpio_vbus,
883 &tosa_audio_device,
884 };
885
886 static void tosa_poweroff(void)
887 {
888 pxa_restart(REBOOT_GPIO, NULL);
889 }
890
891 static void tosa_restart(enum reboot_mode mode, const char *cmd)
892 {
893 uint32_t msc0 = __raw_readl(MSC0);
894
895 /* Bootloader magic for a reboot */
896 if((msc0 & 0xffff0000) == 0x7ff00000)
897 __raw_writel((msc0 & 0xffff) | 0x7ee00000, MSC0);
898
899 tosa_poweroff();
900 }
901
902 static void __init tosa_init(void)
903 {
904 pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
905
906 pxa_set_ffuart_info(NULL);
907 pxa_set_btuart_info(NULL);
908 pxa_set_stuart_info(NULL);
909
910 gpio_set_wake(MFP_PIN_GPIO1, 1);
911 /* We can't pass to gpio-keys since it will drop the Reset altfunc */
912
913 init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
914
915 pm_power_off = tosa_poweroff;
916
917 PCFR |= PCFR_OPDE;
918
919 /* enable batt_fault */
920 PMCR = 0x01;
921
922 pxa_set_mci_info(&tosa_mci_platform_data);
923 pxa_set_ficp_info(&tosa_ficp_platform_data);
924 pxa_set_i2c_info(NULL);
925 pxa_set_ac97_info(NULL);
926 platform_scoop_config = &tosa_pcmcia_config;
927
928 pxa2xx_set_spi_info(2, &pxa_ssp_master_info);
929 spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
930
931 clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL);
932
933 platform_add_devices(devices, ARRAY_SIZE(devices));
934 }
935
936 static void __init fixup_tosa(struct tag *tags, char **cmdline)
937 {
938 sharpsl_save_param();
939 memblock_add(0xa0000000, SZ_64M);
940 }
941
942 MACHINE_START(TOSA, "SHARP Tosa")
943 .fixup = fixup_tosa,
944 .map_io = pxa25x_map_io,
945 .nr_irqs = TOSA_NR_IRQS,
946 .init_irq = pxa25x_init_irq,
947 .handle_irq = pxa25x_handle_irq,
948 .init_machine = tosa_init,
949 .init_time = pxa_timer_init,
950 .restart = tosa_restart,
951 MACHINE_END
This page took 0.049893 seconds and 5 git commands to generate.