arch/arm/mach-s3c2410/Kconfig

   1 # Copyright 2007 Simtec Electronics
   2 #
   3 # Licensed under GPLv2
   4
   5 config CPU_S3C2410
   6         bool
   7         depends on ARCH_S3C2410
   8         select CPU_ARM920T
   9         select S3C2410_CLOCK
  10         select CPU_LLSERIAL_S3C2410
  11         select S3C2410_PM if PM
  12         select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
  13         help
  14           Support for S3C2410 and S3C2410A family from the S3C24XX line
  15           of Samsung Mobile CPUs.
  16
  17 config CPU_S3C2410_DMA
  18         bool
  19         depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
  20         default y if CPU_S3C2410 || CPU_S3C2442
  21         help
  22           DMA device selection for S3C2410 and compatible CPUs
  23
  24 config S3C2410_PM
  25         bool
  26         help
  27           Power Management code common to S3C2410 and better
  28
  29 config SIMTEC_NOR
  30         bool
  31         help
  32           Internal node to specify machine has simtec NOR mapping
  33
  34 config MACH_BAST_IDE
  35         bool
  36         select HAVE_PATA_PLATFORM
  37         help
  38           Internal node for machines with an BAST style IDE
  39           interface
  40
  41 # cpu frequency scaling support
  42
  43 config S3C2410_CPUFREQ
  44         bool
  45         depends on CPU_FREQ_S3C24XX && CPU_S3C2410
  46         select S3C2410_CPUFREQ_UTILS
  47         help
  48           CPU Frequency scaling support for S3C2410
  49
  50 config S3C2410_PLLTABLE
  51         bool
  52         depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
  53         default y
  54         help
  55           Select the PLL table for the S3C2410
  56
  57 menu "S3C2410 Machines"
  58
  59 config ARCH_SMDK2410
  60         bool "SMDK2410/A9M2410"
  61         select CPU_S3C2410
  62         select MACH_SMDK
  63         help
  64            Say Y here if you are using the SMDK2410 or the derived module A9M2410
  65            <http://www.fsforth.de>
  66
  67 config ARCH_H1940
  68         bool "IPAQ H1940"
  69         select CPU_S3C2410
  70         select PM_H1940 if PM
  71         select S3C_DEV_USB_HOST
  72         select S3C_DEV_NAND
  73         select S3C2410_SETUP_TS
  74         help
  75           Say Y here if you are using the HP IPAQ H1940
  76
  77 config H1940BT
  78         tristate "Control the state of H1940 bluetooth chip"
  79         depends on ARCH_H1940
  80         select RFKILL
  81         help
  82           This is a simple driver that is able to control
  83           the state of built in bluetooth chip on h1940.
  84
  85 config PM_H1940
  86         bool
  87         help
  88           Internal node for H1940 and related PM
  89
  90 config MACH_N30
  91         bool "Acer N30 family"
  92         select CPU_S3C2410
  93         select MACH_N35
  94         select S3C_DEV_USB_HOST
  95         select S3C_DEV_NAND
  96         help
  97           Say Y here if you want suppt for the Acer N30, Acer N35,
  98           Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
  99
 100 config MACH_N35
 101         bool
 102         help
 103           Internal node in order to enable support for Acer N35 if Acer N30 is
 104           selected.
 105
 106 config ARCH_BAST
 107         bool "Simtec Electronics BAST (EB2410ITX)"
 108         select CPU_S3C2410
 109         select S3C2410_IOTIMING if S3C2410_CPUFREQ
 110         select PM_SIMTEC if PM
 111         select SIMTEC_NOR
 112         select MACH_BAST_IDE
 113         select S3C24XX_DCLK
 114         select ISA
 115         select S3C_DEV_HWMON
 116         select S3C_DEV_USB_HOST
 117         select S3C_DEV_NAND
 118         help
 119           Say Y here if you are using the Simtec Electronics EB2410ITX
 120           development board (also known as BAST)
 121
 122 config MACH_OTOM
 123         bool "NexVision OTOM Board"
 124         select CPU_S3C2410
 125         select S3C_DEV_USB_HOST
 126         select S3C_DEV_NAND
 127         help
 128           Say Y here if you are using the Nex Vision OTOM board
 129
 130 config MACH_AML_M5900
 131         bool "AML M5900 Series"
 132         select CPU_S3C2410
 133         select PM_SIMTEC if PM
 134         select S3C_DEV_USB_HOST
 135         help
 136            Say Y here if you are using the American Microsystems M5900 Series
 137            <http://www.amltd.com>
 138
 139 config BAST_PC104_IRQ
 140         bool "BAST PC104 IRQ support"
 141         depends on ARCH_BAST
 142         default y
 143         help
 144           Say Y here to enable the PC104 IRQ routing on the
 145           Simtec BAST (EB2410ITX)
 146
 147 config MACH_TCT_HAMMER
 148         bool "TCT Hammer Board"
 149         select CPU_S3C2410
 150         select S3C_DEV_USB_HOST
 151         help
 152            Say Y here if you are using the TinCanTools Hammer Board
 153            <http://www.tincantools.com>
 154
 155 config MACH_VR1000
 156         bool "Thorcom VR1000"
 157         select PM_SIMTEC if PM
 158         select S3C24XX_DCLK
 159         select SIMTEC_NOR
 160         select MACH_BAST_IDE
 161         select CPU_S3C2410
 162         select S3C_DEV_USB_HOST
 163         help
 164           Say Y here if you are using the Thorcom VR1000 board.
 165
 166 config MACH_QT2410
 167         bool "QT2410"
 168         select CPU_S3C2410
 169         select S3C_DEV_USB_HOST
 170         select S3C_DEV_NAND
 171         help
 172            Say Y here if you are using the Armzone QT2410
 173
 174 endmenu