arch/arm/mach-s3c2410/Kconfig

   1 # Copyright 2007 Simtec Electronics
   2 #
   3 # Licensed under GPLv2
   4
   5 config CPU_S3C2410
   6         bool
   7         depends on ARCH_S3C2410
   8         select CPU_ARM920T
   9         select S3C_GPIO_PULL_UP
  10         select S3C2410_CLOCK
  11         select S3C2410_GPIO
  12         select CPU_LLSERIAL_S3C2410
  13         select S3C2410_PM if PM
  14         select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
  15         help
  16           Support for S3C2410 and S3C2410A family from the S3C24XX line
  17           of Samsung Mobile CPUs.
  18
  19 config CPU_S3C2410_DMA
  20         bool
  21         depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
  22         default y if CPU_S3C2410 || CPU_S3C2442
  23         help
  24           DMA device selection for S3C2410 and compatible CPUs
  25
  26 config S3C2410_PM
  27         bool
  28         help
  29           Power Management code common to S3C2410 and better
  30
  31 config S3C2410_GPIO
  32         bool
  33         help
  34           GPIO code for S3C2410 and similar processors
  35
  36 config SIMTEC_NOR
  37         bool
  38         help
  39           Internal node to specify machine has simtec NOR mapping
  40
  41 config MACH_BAST_IDE
  42         bool
  43         select HAVE_PATA_PLATFORM
  44         help
  45           Internal node for machines with an BAST style IDE
  46           interface
  47
  48 # cpu frequency scaling support
  49
  50 config S3C2410_CPUFREQ
  51         bool
  52         depends on CPU_FREQ_S3C24XX && CPU_S3C2410
  53         select S3C2410_CPUFREQ_UTILS
  54         help
  55           CPU Frequency scaling support for S3C2410
  56
  57 config S3C2410_PLLTABLE
  58         bool
  59         depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
  60         default y
  61         help
  62           Select the PLL table for the S3C2410
  63
  64 menu "S3C2410 Machines"
  65
  66 config ARCH_SMDK2410
  67         bool "SMDK2410/A9M2410"
  68         select CPU_S3C2410
  69         select MACH_SMDK
  70         help
  71            Say Y here if you are using the SMDK2410 or the derived module A9M2410
  72            <http://www.fsforth.de>
  73
  74 config ARCH_H1940
  75         bool "IPAQ H1940"
  76         select CPU_S3C2410
  77         select PM_H1940 if PM
  78         select S3C_DEV_USB_HOST
  79         select S3C_DEV_NAND
  80         help
  81           Say Y here if you are using the HP IPAQ H1940
  82
  83 config H1940BT
  84         tristate "Control the state of H1940 bluetooth chip"
  85         depends on ARCH_H1940
  86         select RFKILL
  87         help
  88           This is a simple driver that is able to control
  89           the state of built in bluetooth chip on h1940.
  90
  91 config PM_H1940
  92         bool
  93         help
  94           Internal node for H1940 and related PM
  95
  96 config MACH_N30
  97         bool "Acer N30 family"
  98         select CPU_S3C2410
  99         select S3C_DEV_USB_HOST
 100         select S3C_DEV_NAND
 101         help
 102           Say Y here if you want suppt for the Acer N30, Acer N35,
 103           Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
 104
 105 config ARCH_BAST
 106         bool "Simtec Electronics BAST (EB2410ITX)"
 107         select CPU_S3C2410
 108         select S3C2410_IOTIMING if S3C2410_CPUFREQ
 109         select PM_SIMTEC if PM
 110         select SIMTEC_NOR
 111         select MACH_BAST_IDE
 112         select S3C24XX_DCLK
 113         select ISA
 114         select S3C_DEV_USB_HOST
 115         select S3C_DEV_NAND
 116         help
 117           Say Y here if you are using the Simtec Electronics EB2410ITX
 118           development board (also known as BAST)
 119
 120 config MACH_OTOM
 121         bool "NexVision OTOM Board"
 122         select CPU_S3C2410
 123         select S3C_DEV_USB_HOST
 124         select S3C_DEV_NAND
 125         help
 126           Say Y here if you are using the Nex Vision OTOM board
 127
 128 config MACH_AML_M5900
 129         bool "AML M5900 Series"
 130         select CPU_S3C2410
 131         select PM_SIMTEC if PM
 132         select S3C_DEV_USB_HOST
 133         help
 134            Say Y here if you are using the American Microsystems M5900 Series
 135            <http://www.amltd.com>
 136
 137 config BAST_PC104_IRQ
 138         bool "BAST PC104 IRQ support"
 139         depends on ARCH_BAST
 140         default y
 141         help
 142           Say Y here to enable the PC104 IRQ routing on the
 143           Simtec BAST (EB2410ITX)
 144
 145 config MACH_TCT_HAMMER
 146         bool "TCT Hammer Board"
 147         select CPU_S3C2410
 148         select S3C_DEV_USB_HOST
 149         help
 150            Say Y here if you are using the TinCanTools Hammer Board
 151            <http://www.tincantools.com>
 152
 153 config MACH_VR1000
 154         bool "Thorcom VR1000"
 155         select PM_SIMTEC if PM
 156         select S3C24XX_DCLK
 157         select SIMTEC_NOR
 158         select MACH_BAST_IDE
 159         select CPU_S3C2410
 160         select S3C_DEV_USB_HOST
 161         help
 162           Say Y here if you are using the Thorcom VR1000 board.
 163
 164 config MACH_QT2410
 165         bool "QT2410"
 166         select CPU_S3C2410
 167         select S3C_DEV_USB_HOST
 168         select S3C_DEV_NAND
 169         help
 170            Say Y here if you are using the Armzone QT2410
 171
 172 endmenu