arch/arm/mach-s3c24xx/Kconfig

   1 # arch/arm/mach-s3c24xx/Kconfig
   2 #
   3 # Copyright (c) 2012 Samsung Electronics Co., Ltd.
   4 #               http://www.samsung.com/
   5 #
   6 # Copyright 2007 Simtec Electronics
   7 #
   8 # Licensed under GPLv2
   9
  10 if ARCH_S3C24XX
  11
  12 config PLAT_S3C24XX
  13         def_bool y
  14         select ARCH_REQUIRE_GPIOLIB
  15         select NO_IOPORT_MAP
  16         select S3C_DEV_NAND
  17         select IRQ_DOMAIN
  18         help
  19           Base platform code for any Samsung S3C24XX device
  20
  21 config S3C2410_COMMON_CLK
  22         bool
  23         help
  24           Build the s3c2410 clock driver based on the common clock framework.
  25
  26 config S3C2410_COMMON_DCLK
  27         bool
  28         select REGMAP_MMIO
  29         help
  30           Temporary symbol to build the dclk driver based on the common clock
  31           framework.
  32
  33 menu "SAMSUNG S3C24XX SoCs Support"
  34
  35 comment "S3C24XX SoCs"
  36
  37 config CPU_S3C2410
  38         bool "SAMSUNG S3C2410"
  39         default y
  40         select COMMON_CLK
  41         select CPU_ARM920T
  42         select CPU_LLSERIAL_S3C2410
  43         select S3C2410_COMMON_CLK
  44         select S3C2410_DMA if S3C24XX_DMA
  45         select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
  46         select S3C2410_PM if PM
  47         select SAMSUNG_WDT_RESET
  48         help
  49           Support for S3C2410 and S3C2410A family from the S3C24XX line
  50           of Samsung Mobile CPUs.
  51
  52 config CPU_S3C2412
  53         bool "SAMSUNG S3C2412"
  54         select COMMON_CLK
  55         select CPU_ARM926T
  56         select CPU_LLSERIAL_S3C2440
  57         select S3C2412_COMMON_CLK
  58         select S3C2412_DMA if S3C24XX_DMA
  59         select S3C2412_PM if PM
  60         help
  61           Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
  62
  63 config CPU_S3C2416
  64         bool "SAMSUNG S3C2416/S3C2450"
  65         select COMMON_CLK
  66         select CPU_ARM926T
  67         select CPU_LLSERIAL_S3C2440
  68         select S3C2416_PM if PM
  69         select S3C2443_COMMON_CLK
  70         select S3C2443_DMA if S3C24XX_DMA
  71         help
  72           Support for the S3C2416 SoC from the S3C24XX line
  73
  74 config CPU_S3C2440
  75         bool "SAMSUNG S3C2440"
  76         select COMMON_CLK
  77         select CPU_ARM920T
  78         select CPU_LLSERIAL_S3C2440
  79         select S3C2410_COMMON_CLK
  80         select S3C2410_PM if PM
  81         select S3C2440_DMA if S3C24XX_DMA
  82         help
  83           Support for S3C2440 Samsung Mobile CPU based systems.
  84
  85 config CPU_S3C2442
  86         bool "SAMSUNG S3C2442"
  87         select COMMON_CLK
  88         select CPU_ARM920T
  89         select CPU_LLSERIAL_S3C2440
  90         select S3C2410_COMMON_CLK
  91         select S3C2410_DMA if S3C24XX_DMA
  92         select S3C2410_PM if PM
  93         help
  94           Support for S3C2442 Samsung Mobile CPU based systems.
  95
  96 config CPU_S3C244X
  97         def_bool y
  98         depends on CPU_S3C2440 || CPU_S3C2442
  99         select SAMSUNG_WDT_RESET
 100
 101 config CPU_S3C2443
 102         bool "SAMSUNG S3C2443"
 103         select COMMON_CLK
 104         select CPU_ARM920T
 105         select CPU_LLSERIAL_S3C2440
 106         select S3C2443_COMMON_CLK
 107         select S3C2443_DMA if S3C24XX_DMA
 108         help
 109           Support for the S3C2443 SoC from the S3C24XX line
 110
 111 # common code
 112
 113 config S3C2410_CLOCK
 114         bool
 115         help
 116           Clock code for the S3C2410, and similar processors which
 117           is currently includes the S3C2410, S3C2440, S3C2442.
 118
 119 config S3C24XX_DCLK
 120         bool
 121         help
 122           Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
 123
 124 config S3C24XX_SMDK
 125         bool
 126         help
 127           Common machine code for SMDK2410 and SMDK2440
 128
 129 config S3C24XX_SIMTEC_AUDIO
 130         bool
 131         depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS)
 132         default y
 133         help
 134           Add audio devices for common Simtec S3C24XX boards
 135
 136 config S3C24XX_SIMTEC_PM
 137         bool
 138         help
 139           Common power management code for systems that are
 140           compatible with the Simtec style of power management
 141
 142 config S3C24XX_SIMTEC_USB
 143         bool
 144         help
 145           USB management code for common Simtec S3C24XX boards
 146
 147 config S3C24XX_SETUP_TS
 148         bool
 149         help
 150           Compile in platform device definition for Samsung TouchScreen.
 151
 152 config S3C24XX_DMA
 153         bool "S3C2410 DMA support"
 154         select S3C_DMA
 155         help
 156           S3C2410 DMA support. This is needed for drivers like sound which
 157           use the S3C2410's DMA system to move data to and from the
 158           peripheral blocks.
 159
 160 config S3C2410_DMA_DEBUG
 161         bool "S3C2410 DMA support debug"
 162         depends on S3C2410_DMA
 163         help
 164           Enable debugging output for the DMA code. This option sends info
 165           to the kernel log, at priority KERN_DEBUG.
 166
 167 config S3C2410_DMA
 168         bool
 169         depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
 170         help
 171           DMA device selection for S3C2410 and compatible CPUs
 172
 173 config S3C2410_PM
 174         bool
 175         help
 176           Power Management code common to S3C2410 and better
 177
 178 # low-level serial option nodes
 179
 180 config CPU_LLSERIAL_S3C2410_ONLY
 181         bool
 182         default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
 183
 184 config CPU_LLSERIAL_S3C2440_ONLY
 185         bool
 186         default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
 187
 188 config CPU_LLSERIAL_S3C2410
 189         bool
 190         help
 191           Selected if there is an S3C2410 (or register compatible) serial
 192           low-level implementation needed
 193
 194 config CPU_LLSERIAL_S3C2440
 195         bool
 196         help
 197           Selected if there is an S3C2440 (or register compatible) serial
 198           low-level implementation needed
 199
 200 config S3C24XX_PLL
 201         bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
 202         depends on ARM_S3C24XX_CPUFREQ
 203         help
 204           Compile in support for changing the PLL frequency from the
 205           S3C24XX series CPUfreq driver. The PLL takes time to settle
 206           after a frequency change, so by default it is not enabled.
 207
 208           This also means that the PLL tables for the selected CPU(s) will
 209           be built which may increase the size of the kernel image.
 210
 211 # cpu frequency items common between s3c2410 and s3c2440/s3c2442
 212
 213 config S3C2410_IOTIMING
 214         bool
 215         depends on ARM_S3C24XX_CPUFREQ
 216         help
 217           Internal node to select io timing code that is common to the s3c2410
 218           and s3c2440/s3c2442 cpu frequency support.
 219
 220 config S3C2410_CPUFREQ_UTILS
 221        bool
 222        depends on ARM_S3C24XX_CPUFREQ
 223        help
 224          Internal node to select timing code that is common to the s3c2410
 225          and s3c2440/s3c244 cpu frequency support.
 226
 227 # cpu frequency support common to s3c2412, s3c2413 and s3c2442
 228
 229 config S3C2412_IOTIMING
 230         bool
 231         depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2412 || CPU_S3C2443)
 232         help
 233           Intel node to select io timing code that is common to the s3c2412
 234           and the s3c2443.
 235
 236 # cpu-specific sections
 237
 238 if CPU_S3C2410
 239
 240 config S3C2410_PLL
 241         bool
 242         depends on ARM_S3C2410_CPUFREQ && S3C24XX_PLL
 243         default y
 244         help
 245           Select the PLL table for the S3C2410
 246
 247 config S3C24XX_SIMTEC_NOR
 248         bool
 249         help
 250           Internal node to specify machine has simtec NOR mapping
 251
 252 config MACH_BAST_IDE
 253         bool
 254         select HAVE_PATA_PLATFORM
 255         help
 256           Internal node for machines with an BAST style IDE
 257           interface
 258
 259 comment "S3C2410 Boards"
 260
 261 #
 262 # The "S3C2410 Boards" list is ordered alphabetically by option text.
 263 # (without ARCH_ or MACH_)
 264 #
 265
 266 config MACH_AML_M5900
 267         bool "AML M5900 Series"
 268         select S3C24XX_SIMTEC_PM if PM
 269         select S3C_DEV_USB_HOST
 270         help
 271           Say Y here if you are using the American Microsystems M5900 Series
 272           <http://www.amltd.com>
 273
 274 config ARCH_BAST
 275         bool "Simtec Electronics BAST (EB2410ITX)"
 276         select ISA
 277         select MACH_BAST_IDE
 278         select S3C2410_COMMON_DCLK if COMMON_CLK
 279         select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ
 280         select S3C24XX_DCLK if SAMSUNG_CLOCK
 281         select S3C24XX_SIMTEC_NOR
 282         select S3C24XX_SIMTEC_PM if PM
 283         select S3C24XX_SIMTEC_USB
 284         select S3C_DEV_HWMON
 285         select S3C_DEV_NAND
 286         select S3C_DEV_USB_HOST
 287         help
 288           Say Y here if you are using the Simtec Electronics EB2410ITX
 289           development board (also known as BAST)
 290
 291 config BAST_PC104_IRQ
 292         bool "BAST PC104 IRQ support"
 293         depends on ARCH_BAST
 294         default y
 295         help
 296           Say Y here to enable the PC104 IRQ routing on the
 297           Simtec BAST (EB2410ITX)
 298
 299 config ARCH_H1940
 300         bool "IPAQ H1940"
 301         select PM_H1940 if PM
 302         select S3C24XX_SETUP_TS
 303         select S3C_DEV_NAND
 304         select S3C_DEV_USB_HOST
 305         help
 306           Say Y here if you are using the HP IPAQ H1940
 307
 308 config H1940BT
 309         tristate "Control the state of H1940 bluetooth chip"
 310         depends on ARCH_H1940
 311         select RFKILL
 312         help
 313           This is a simple driver that is able to control
 314           the state of built in bluetooth chip on h1940.
 315
 316 config PM_H1940
 317         bool
 318         help
 319           Internal node for H1940 and related PM
 320
 321 config MACH_N30
 322         bool "Acer N30 family"
 323         select S3C_DEV_NAND
 324         select S3C_DEV_USB_HOST
 325         help
 326           Say Y here if you want suppt for the Acer N30, Acer N35,
 327           Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
 328
 329 config MACH_OTOM
 330         bool "NexVision OTOM Board"
 331         select S3C_DEV_NAND
 332         select S3C_DEV_USB_HOST
 333         help
 334           Say Y here if you are using the Nex Vision OTOM board
 335
 336 config MACH_QT2410
 337         bool "QT2410"
 338         select S3C_DEV_NAND
 339         select S3C_DEV_USB_HOST
 340         help
 341           Say Y here if you are using the Armzone QT2410
 342
 343 config ARCH_SMDK2410
 344         bool "SMDK2410/A9M2410"
 345         select S3C24XX_SMDK
 346         select S3C_DEV_USB_HOST
 347         help
 348           Say Y here if you are using the SMDK2410 or the derived module A9M2410
 349           <http://www.fsforth.de>
 350
 351 config MACH_TCT_HAMMER
 352         bool "TCT Hammer Board"
 353         select S3C_DEV_USB_HOST
 354         help
 355           Say Y here if you are using the TinCanTools Hammer Board
 356           <http://www.tincantools.com>
 357
 358 config MACH_VR1000
 359         bool "Thorcom VR1000"
 360         select MACH_BAST_IDE
 361         select S3C2410_COMMON_DCLK if COMMON_CLK
 362         select S3C24XX_DCLK if SAMSUNG_CLOCK
 363         select S3C24XX_SIMTEC_NOR
 364         select S3C24XX_SIMTEC_PM if PM
 365         select S3C24XX_SIMTEC_USB
 366         select S3C_DEV_USB_HOST
 367         help
 368           Say Y here if you are using the Thorcom VR1000 board.
 369
 370 endif   # CPU_S3C2410
 371
 372 config S3C2412_PM_SLEEP
 373         bool
 374         help
 375           Internal config node to apply sleep for S3C2412 power management.
 376           Can be selected by another SoCs such as S3C2416 with similar
 377           sleep procedure.
 378
 379 if CPU_S3C2412
 380
 381 config S3C2412_COMMON_CLK
 382         bool
 383         help
 384           Build the s3c2412 clock driver based on the common clock framework.
 385
 386 config CPU_S3C2412_ONLY
 387         bool
 388         depends on !CPU_S3C2410 && !CPU_S3C2416 && !CPU_S3C2440 && \
 389                    !CPU_S3C2442 && !CPU_S3C2443
 390         default y
 391
 392 config S3C2412_DMA
 393         bool
 394         help
 395           Internal config node for S3C2412 DMA support
 396
 397 config S3C2412_PM
 398         bool
 399         select S3C2412_PM_SLEEP
 400         select SAMSUNG_WAKEMASK
 401         help
 402           Internal config node to apply S3C2412 power management
 403
 404 comment "S3C2412 Boards"
 405
 406 #
 407 # The "S3C2412 Boards" list is ordered alphabetically by option text.
 408 # (without ARCH_ or MACH_)
 409 #
 410
 411 config MACH_JIVE
 412         bool "Logitech Jive"
 413         select S3C_DEV_NAND
 414         select S3C_DEV_USB_HOST
 415         help
 416           Say Y here if you are using the Logitech Jive.
 417
 418 config MACH_JIVE_SHOW_BOOTLOADER
 419         bool "Allow access to bootloader partitions in MTD"
 420         depends on MACH_JIVE
 421
 422 config MACH_S3C2413
 423         bool
 424         help
 425           Internal node for S3C2413 version of SMDK2413, so that
 426           machine_is_s3c2413() will work when MACH_SMDK2413 is
 427           selected
 428
 429 config MACH_SMDK2412
 430         bool "SMDK2412"
 431         select MACH_SMDK2413
 432         help
 433           Say Y here if you are using an SMDK2412
 434
 435           Note, this shares support with SMDK2413, so will automatically
 436           select MACH_SMDK2413.
 437
 438 config MACH_SMDK2413
 439         bool "SMDK2413"
 440         select MACH_S3C2413
 441         select S3C24XX_SMDK
 442         select S3C_DEV_NAND
 443         select S3C_DEV_USB_HOST
 444         help
 445           Say Y here if you are using an SMDK2413
 446
 447 config MACH_VSTMS
 448         bool "VMSTMS"
 449         select S3C_DEV_NAND
 450         select S3C_DEV_USB_HOST
 451         help
 452           Say Y here if you are using an VSTMS board
 453
 454 endif   # CPU_S3C2412
 455
 456 if CPU_S3C2416
 457
 458 config S3C2416_PM
 459         bool
 460         select S3C2412_PM_SLEEP
 461         help
 462           Internal config node to apply S3C2416 power management
 463
 464 config S3C2416_SETUP_SDHCI
 465         bool
 466         select S3C2416_SETUP_SDHCI_GPIO
 467         help
 468           Internal helper functions for S3C2416 based SDHCI systems
 469
 470 config S3C2416_SETUP_SDHCI_GPIO
 471         bool
 472         help
 473           Common setup code for SDHCI gpio.
 474
 475 comment "S3C2416 Boards"
 476
 477 config MACH_SMDK2416
 478         bool "SMDK2416"
 479         select S3C2416_SETUP_SDHCI
 480         select S3C24XX_SMDK
 481         select S3C_DEV_FB
 482         select S3C_DEV_HSMMC
 483         select S3C_DEV_HSMMC1
 484         select S3C_DEV_NAND
 485         select S3C_DEV_USB_HOST
 486         help
 487           Say Y here if you are using an SMDK2416
 488
 489 config MACH_S3C2416_DT
 490         bool "Samsung S3C2416 machine using devicetree"
 491         select CLKSRC_OF
 492         select USE_OF
 493         select PINCTRL
 494         select PINCTRL_S3C24XX
 495         help
 496           Machine support for Samsung S3C2416 machines with device tree enabled.
 497           Select this if a fdt blob is available for the S3C2416 SoC based board.
 498           Note: This is under development and not all peripherals can be supported
 499           with this machine file.
 500
 501 endif   # CPU_S3C2416
 502
 503 if CPU_S3C2440
 504
 505 config S3C2440_DMA
 506         bool
 507         help
 508           Support for S3C2440 specific DMA code5A
 509
 510 config S3C2440_XTAL_12000000
 511         bool
 512         help
 513           Indicate that the build needs to support 12MHz system
 514           crystal.
 515
 516 config S3C2440_XTAL_16934400
 517         bool
 518         help
 519           Indicate that the build needs to support 16.9344MHz system
 520           crystal.
 521
 522 config S3C2440_PLL_12000000
 523         bool
 524         depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_12000000
 525         default y if S3C24XX_PLL
 526         help
 527           PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
 528
 529 config S3C2440_PLL_16934400
 530         bool
 531         depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_16934400
 532         default y if S3C24XX_PLL
 533         help
 534           PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
 535
 536 comment "S3C2440 Boards"
 537
 538 #
 539 # The "S3C2440 Boards" list is ordered alphabetically by option text.
 540 # (without ARCH_ or MACH_)
 541 #
 542
 543 config MACH_ANUBIS
 544         bool "Simtec Electronics ANUBIS"
 545         select HAVE_PATA_PLATFORM
 546         select S3C2410_COMMON_DCLK if COMMON_CLK
 547         select S3C2440_XTAL_12000000
 548         select S3C24XX_DCLK if SAMSUNG_CLOCK
 549         select S3C24XX_SIMTEC_PM if PM
 550         select S3C_DEV_USB_HOST
 551         help
 552           Say Y here if you are using the Simtec Electronics ANUBIS
 553           development system
 554
 555 config MACH_AT2440EVB
 556         bool "Avantech AT2440EVB development board"
 557         select S3C_DEV_NAND
 558         select S3C_DEV_USB_HOST
 559         help
 560           Say Y here if you are using the AT2440EVB development board
 561
 562 config MACH_MINI2440
 563         bool "MINI2440 development board"
 564         select EEPROM_AT24 if I2C
 565         select LEDS_CLASS
 566         select LEDS_TRIGGERS
 567         select LEDS_TRIGGER_BACKLIGHT
 568         select NEW_LEDS
 569         select S3C_DEV_NAND
 570         select S3C_DEV_USB_HOST
 571         select S3C_SETUP_CAMIF
 572         help
 573           Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
 574           available via various sources. It can come with a 3.5" or 7" touch LCD.
 575
 576 config MACH_NEXCODER_2440
 577         bool "NexVision NEXCODER 2440 Light Board"
 578         select S3C2440_XTAL_12000000
 579         select S3C_DEV_NAND
 580         select S3C_DEV_USB_HOST
 581         help
 582           Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
 583
 584 config MACH_OSIRIS
 585         bool "Simtec IM2440D20 (OSIRIS) module"
 586         select S3C2410_COMMON_DCLK if COMMON_CLK
 587         select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
 588         select S3C2440_XTAL_12000000
 589         select S3C24XX_DCLK if SAMSUNG_CLOCK
 590         select S3C24XX_SIMTEC_PM if PM
 591         select S3C_DEV_NAND
 592         select S3C_DEV_USB_HOST
 593         help
 594           Say Y here if you are using the Simtec IM2440D20 module, also
 595           known as the Osiris.
 596
 597 config MACH_OSIRIS_DVS
 598         tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
 599         depends on MACH_OSIRIS
 600         depends on TPS65010
 601         help
 602           Say Y/M here if you want to have dynamic voltage scaling support
 603           on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
 604
 605           The DVS driver alters the voltage supplied to the ARM core
 606           depending on the frequency it is running at. The driver itself
 607           does not do any of the frequency alteration, which is left up
 608           to the cpufreq driver.
 609
 610 config MACH_RX3715
 611         bool "HP iPAQ rx3715"
 612         select PM_H1940 if PM
 613         select S3C2440_XTAL_16934400
 614         select S3C_DEV_NAND
 615         help
 616           Say Y here if you are using the HP iPAQ rx3715.
 617
 618 config ARCH_S3C2440
 619         bool "SMDK2440"
 620         select S3C2440_XTAL_16934400
 621         select S3C24XX_SMDK
 622         select S3C_DEV_NAND
 623         select S3C_DEV_USB_HOST
 624         help
 625           Say Y here if you are using the SMDK2440.
 626
 627 config SMDK2440_CPU2440
 628         bool "SMDK2440 with S3C2440 CPU module"
 629         default y if ARCH_S3C2440
 630         select S3C2440_XTAL_16934400
 631
 632 endif   # CPU_S3C2440
 633
 634 if CPU_S3C2442
 635
 636 comment "S3C2442 Boards"
 637
 638 #
 639 # The "S3C2442 Boards" list is ordered alphabetically by option text.
 640 # (without ARCH_ or MACH_)
 641 #
 642
 643 config MACH_NEO1973_GTA02
 644         bool "Openmoko GTA02 / Freerunner phone"
 645         select I2C
 646         select MFD_PCF50633
 647         select PCF50633_GPIO
 648         select POWER_SUPPLY
 649         select S3C24XX_PWM
 650         select S3C_DEV_USB_HOST
 651         help
 652            Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
 653
 654 config MACH_RX1950
 655         bool "HP iPAQ rx1950"
 656         select I2C
 657         select PM_H1940 if PM
 658         select S3C2410_COMMON_DCLK if COMMON_CLK
 659         select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
 660         select S3C2440_XTAL_16934400
 661         select S3C24XX_DCLK if SAMSUNG_CLOCK
 662         select S3C24XX_PWM
 663         select S3C_DEV_NAND
 664         help
 665            Say Y here if you're using HP iPAQ rx1950
 666
 667 endif   # CPU_S3C2442
 668
 669 if CPU_S3C2443 || CPU_S3C2416
 670
 671 config S3C2443_COMMON_CLK
 672         bool
 673         help
 674           Temporary symbol to build the clock driver based on the common clock
 675           framework.
 676
 677 config S3C2443_DMA
 678         bool
 679         help
 680           Internal config node for S3C2443 DMA support
 681
 682 config S3C2443_SETUP_SPI
 683         bool
 684         help
 685           Common setup code for SPI GPIO configurations
 686
 687 endif   # CPU_S3C2443 || CPU_S3C2416
 688
 689 if CPU_S3C2443
 690
 691 comment "S3C2443 Boards"
 692
 693 config MACH_SMDK2443
 694         bool "SMDK2443"
 695         select S3C24XX_SMDK
 696         select S3C_DEV_HSMMC1
 697         help
 698           Say Y here if you are using an SMDK2443
 699
 700 endif   # CPU_S3C2443
 701
 702 endmenu # SAMSUNG S3C24XX SoCs Support
 703
 704 endif   # ARCH_S3C24XX