6d9b688c442bd649f81bf93ef897cb295fc0f091
[deliverable/linux.git] / arch / arm / mach-s3c24xx / clock-s3c244x.c
1 /* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c
2 *
3 * Copyright (c) 2004-2008 Simtec Electronics
4 * http://armlinux.simtec.co.uk/
5 * Ben Dooks <ben@simtec.co.uk>
6 *
7 * S3C2440/S3C2442 Common clock support
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 */
23
24 #include <linux/init.h>
25 #include <linux/module.h>
26 #include <linux/kernel.h>
27 #include <linux/list.h>
28 #include <linux/errno.h>
29 #include <linux/err.h>
30 #include <linux/device.h>
31 #include <linux/interrupt.h>
32 #include <linux/ioport.h>
33 #include <linux/clk.h>
34 #include <linux/io.h>
35
36 #include <mach/hardware.h>
37 #include <linux/atomic.h>
38 #include <asm/irq.h>
39
40 #include <mach/regs-clock.h>
41
42 #include <plat/clock.h>
43 #include <plat/cpu.h>
44
45 static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent)
46 {
47 unsigned long camdivn;
48 unsigned long dvs;
49
50 if (parent == &clk_f)
51 dvs = 0;
52 else if (parent == &clk_h)
53 dvs = S3C2440_CAMDIVN_DVSEN;
54 else
55 return -EINVAL;
56
57 clk->parent = parent;
58
59 camdivn = __raw_readl(S3C2440_CAMDIVN);
60 camdivn &= ~S3C2440_CAMDIVN_DVSEN;
61 camdivn |= dvs;
62 __raw_writel(camdivn, S3C2440_CAMDIVN);
63
64 return 0;
65 }
66
67 static struct clk clk_arm = {
68 .name = "armclk",
69 .id = -1,
70 .ops = &(struct clk_ops) {
71 .set_parent = s3c2440_setparent_armclk,
72 },
73 };
74
75 static int s3c244x_clk_add(struct device *dev, struct subsys_interface *sif)
76 {
77 unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
78 unsigned long clkdivn;
79 struct clk *clock_upll;
80 int ret;
81
82 printk("S3C244X: Clock Support, DVS %s\n",
83 (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
84
85 clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f;
86
87 ret = s3c24xx_register_clock(&clk_arm);
88 if (ret < 0) {
89 printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret);
90 return ret;
91 }
92
93 clock_upll = clk_get(NULL, "upll");
94 if (IS_ERR(clock_upll)) {
95 printk(KERN_ERR "S3C244X: Failed to get upll clock\n");
96 return -ENOENT;
97 }
98
99 /* check rate of UPLL, and if it is near 96MHz, then change
100 * to using half the UPLL rate for the system */
101
102 if (clk_get_rate(clock_upll) > (94 * MHZ)) {
103 clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
104
105 spin_lock(&clocks_lock);
106
107 clkdivn = __raw_readl(S3C2410_CLKDIVN);
108 clkdivn |= S3C2440_CLKDIVN_UCLK;
109 __raw_writel(clkdivn, S3C2410_CLKDIVN);
110
111 spin_unlock(&clocks_lock);
112 }
113
114 return 0;
115 }
116
117 static struct subsys_interface s3c2440_clk_interface = {
118 .name = "s3c2440_clk",
119 .subsys = &s3c2440_subsys,
120 .add_dev = s3c244x_clk_add,
121 };
122
123 static int s3c2440_clk_init(void)
124 {
125 return subsys_interface_register(&s3c2440_clk_interface);
126 }
127
128 arch_initcall(s3c2440_clk_init);
129
130 static struct subsys_interface s3c2442_clk_interface = {
131 .name = "s3c2442_clk",
132 .subsys = &s3c2442_subsys,
133 .add_dev = s3c244x_clk_add,
134 };
135
136 static int s3c2442_clk_init(void)
137 {
138 return subsys_interface_register(&s3c2442_clk_interface);
139 }
140
141 arch_initcall(s3c2442_clk_init);
This page took 0.040568 seconds and 4 git commands to generate.