1 # arch/arm/mach-s3c6410/Kconfig
3 # Copyright 2008 Openmoko, Inc.
4 # Copyright 2008 Simtec Electronics
8 # Configuration options for the S3C6410 CPU
12 select CPU_S3C6400_INIT
13 select CPU_S3C6400_CLOCK
15 Enable S3C6410 CPU support
17 config S3C6410_SETUP_SDHCI
19 select S3C64XX_SETUP_SDHCI_GPIO
21 Internal helper functions for S3C6410 based SDHCI systems
30 select S3C_DEV_USB_HOST
31 select S3C6410_SETUP_SDHCI
32 select S3C64XX_SETUP_I2C1
33 select S3C64XX_SETUP_FB_24BPP
35 Machine support for the Samsung SMDK6410
37 # At least some of the SMDK6410s were shipped with the card detect
38 # for the MMC/SD slots connected to the same input. This means that
39 # either the boards need to be altered to have channel0 to an alternate
40 # configuration or that only one slot can be used.
43 prompt "SMDK6410 MMC/SD slot setup"
44 depends on MACH_SMDK6410
46 config SMDK6410_SD_CH0
47 bool "Use channel 0 only"
48 depends on MACH_SMDK6410
50 Select CON7 (channel 0) as the MMC/SD slot, as
51 at least some SMDK6410 boards come with the
52 resistors fitted so that the card detects for
53 channels 0 and 1 are the same.
55 config SMDK6410_SD_CH1
56 bool "Use channel 1 only"
57 depends on MACH_SMDK6410
59 Select CON6 (channel 1) as the MMC/SD slot, as
60 at least some SMDK6410 boards come with the
61 resistors fitted so that the card detects for
62 channels 0 and 1 are the same.