arch/arm/mach-s3c64xx/Kconfig

   1 # Copyright 2008 Openmoko, Inc.
   2 #       Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
   3 #
   4 # Licensed under GPLv2
   5
   6 if ARCH_S3C64XX
   7
   8 # Configuration options for the S3C6410 CPU
   9
  10 config CPU_S3C6400
  11         bool
  12         help
  13           Enable S3C6400 CPU support
  14
  15 config CPU_S3C6410
  16         bool
  17         help
  18           Enable S3C6410 CPU support
  19
  20 config S3C64XX_PL080
  21         def_bool DMADEVICES
  22         select ARM_AMBA
  23         select AMBA_PL08X
  24
  25 config S3C64XX_SETUP_SDHCI
  26         bool
  27         select S3C64XX_SETUP_SDHCI_GPIO
  28         help
  29           Internal configuration for default SDHCI setup for S3C6400 and
  30           S3C6410 SoCs.
  31
  32 config S3C64XX_DEV_ONENAND1
  33         bool
  34         help
  35           Compile in platform device definition for OneNAND1 controller
  36
  37 # platform specific device setup
  38
  39 config S3C64XX_SETUP_I2C0
  40         bool
  41         default y
  42         help
  43           Common setup code for i2c bus 0.
  44
  45           Note, currently since i2c0 is always compiled, this setup helper
  46           is always compiled with it.
  47
  48 config S3C64XX_SETUP_I2C1
  49         bool
  50         help
  51           Common setup code for i2c bus 1.
  52
  53 config S3C64XX_SETUP_IDE
  54         bool
  55         help
  56           Common setup code for S3C64XX IDE.
  57
  58 config S3C64XX_SETUP_FB_24BPP
  59         bool
  60         help
  61           Common setup code for S3C64XX with an 24bpp RGB display helper.
  62
  63 config S3C64XX_SETUP_KEYPAD
  64         bool
  65         help
  66           Common setup code for S3C64XX KEYPAD GPIO configurations
  67
  68 config S3C64XX_SETUP_SDHCI_GPIO
  69         bool
  70         help
  71           Common setup code for S3C64XX SDHCI GPIO configurations
  72
  73 config S3C64XX_SETUP_SPI
  74         bool
  75         help
  76          Common setup code for SPI GPIO configurations
  77
  78 config S3C64XX_SETUP_USB_PHY
  79         bool
  80         help
  81           Common setup code for USB PHY controller
  82
  83 # S36400 Macchine support
  84
  85 config MACH_SMDK6400
  86        bool "SMDK6400"
  87         select CPU_S3C6400
  88         select S3C64XX_SETUP_SDHCI
  89         select S3C_DEV_HSMMC1
  90         help
  91           Machine support for the Samsung SMDK6400
  92
  93 # S3C6410 machine support
  94
  95 config MACH_ANW6410
  96         bool "A&W6410"
  97         select CPU_S3C6410
  98         select S3C64XX_SETUP_FB_24BPP
  99         select S3C_DEV_FB
 100         help
 101           Machine support for the A&W6410
 102
 103 config MACH_MINI6410
 104         bool "MINI6410"
 105         select CPU_S3C6410
 106         select S3C64XX_SETUP_FB_24BPP
 107         select S3C64XX_SETUP_SDHCI
 108         select S3C_DEV_FB
 109         select S3C_DEV_HSMMC
 110         select S3C_DEV_HSMMC1
 111         select S3C_DEV_NAND
 112         select S3C_DEV_USB_HOST
 113         select SAMSUNG_DEV_ADC
 114         select SAMSUNG_DEV_TS
 115         help
 116           Machine support for the FriendlyARM MINI6410
 117
 118 config MACH_REAL6410
 119         bool "REAL6410"
 120         select CPU_S3C6410
 121         select S3C64XX_SETUP_FB_24BPP
 122         select S3C64XX_SETUP_SDHCI
 123         select S3C_DEV_FB
 124         select S3C_DEV_HSMMC
 125         select S3C_DEV_HSMMC1
 126         select S3C_DEV_NAND
 127         select S3C_DEV_USB_HOST
 128         select SAMSUNG_DEV_ADC
 129         select SAMSUNG_DEV_TS
 130         help
 131           Machine support for the CoreWind REAL6410
 132
 133 config MACH_SMDK6410
 134         bool "SMDK6410"
 135         select CPU_S3C6410
 136         select HAVE_S3C2410_WATCHDOG if WATCHDOG
 137         select S3C64XX_SETUP_FB_24BPP
 138         select S3C64XX_SETUP_I2C1
 139         select S3C64XX_SETUP_IDE
 140         select S3C64XX_SETUP_KEYPAD
 141         select S3C64XX_SETUP_SDHCI
 142         select S3C64XX_SETUP_USB_PHY
 143         select S3C_DEV_FB
 144         select S3C_DEV_HSMMC
 145         select S3C_DEV_HSMMC1
 146         select S3C_DEV_I2C1
 147         select S3C_DEV_RTC
 148         select S3C_DEV_USB_HOST
 149         select S3C_DEV_USB_HSOTG
 150         select S3C_DEV_WDT
 151         select SAMSUNG_DEV_ADC
 152         select SAMSUNG_DEV_BACKLIGHT
 153         select SAMSUNG_DEV_IDE
 154         select SAMSUNG_DEV_KEYPAD
 155         select SAMSUNG_DEV_PWM
 156         select SAMSUNG_DEV_TS
 157         help
 158           Machine support for the Samsung SMDK6410
 159
 160 # At least some of the SMDK6410s were shipped with the card detect
 161 # for the MMC/SD slots connected to the same input. This means that
 162 # either the boards need to be altered to have channel0 to an alternate
 163 # configuration or that only one slot can be used.
 164
 165 choice
 166         prompt "SMDK6410 MMC/SD slot setup"
 167         depends on MACH_SMDK6410
 168
 169 config SMDK6410_SD_CH0
 170         bool "Use channel 0 only"
 171         depends on MACH_SMDK6410
 172         help
 173           Select CON7 (channel 0) as the MMC/SD slot, as
 174           at least some SMDK6410 boards come with the
 175           resistors fitted so that the card detects for
 176           channels 0 and 1 are the same.
 177
 178 config SMDK6410_SD_CH1
 179         bool "Use channel 1 only"
 180         depends on MACH_SMDK6410
 181         help
 182           Select CON6 (channel 1) as the MMC/SD slot, as
 183           at least some SMDK6410 boards come with the
 184           resistors fitted so that the card detects for
 185           channels 0 and 1 are the same.
 186
 187 endchoice
 188
 189 config SMDK6410_WM1190_EV1
 190         bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
 191         depends on MACH_SMDK6410
 192         select MFD_WM8350_I2C
 193         select REGULATOR
 194         select REGULATOR_WM8350
 195         help
 196           The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
 197           and audio daughtercard for the Samsung SMDK6410 reference
 198           platform.  Enabling this option will build support for this
 199           module into the kernel.  The presence of the module will be
 200           detected at runtime so the resulting kernel can be used
 201           with or without the 1190-EV1 fitted.
 202
 203 config SMDK6410_WM1192_EV1
 204         bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
 205         depends on MACH_SMDK6410
 206         select MFD_WM831X
 207         select MFD_WM831X_I2C
 208         select REGULATOR
 209         select REGULATOR_WM831X
 210         help
 211           The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
 212           daughtercard for the Samsung SMDK6410 reference platform.
 213           Enabling this option will build support for this module into
 214           the kernel.  The presence of the daughtercard will be
 215           detected at runtime so the resulting kernel can be used
 216           with or without the 1192-EV1 fitted.
 217
 218 config MACH_NCP
 219         bool "NCP"
 220         select CPU_S3C6410
 221         select S3C64XX_SETUP_I2C1
 222         select S3C_DEV_HSMMC1
 223         select S3C_DEV_I2C1
 224         help
 225           Machine support for the Samsung NCP
 226
 227 config MACH_HMT
 228         bool "Airgoo HMT"
 229         select CPU_S3C6410
 230         select S3C64XX_SETUP_FB_24BPP
 231         select S3C_DEV_FB
 232         select S3C_DEV_NAND
 233         select S3C_DEV_USB_HOST
 234         select SAMSUNG_DEV_PWM
 235         help
 236           Machine support for the Airgoo HMT
 237
 238 config MACH_SMARTQ
 239         bool
 240         select CPU_S3C6410
 241         select S3C64XX_SETUP_FB_24BPP
 242         select S3C64XX_SETUP_SDHCI
 243         select S3C64XX_SETUP_USB_PHY
 244         select S3C_DEV_FB
 245         select S3C_DEV_HSMMC
 246         select S3C_DEV_HSMMC1
 247         select S3C_DEV_HSMMC2
 248         select S3C_DEV_HWMON
 249         select S3C_DEV_RTC
 250         select S3C_DEV_USB_HOST
 251         select S3C_DEV_USB_HSOTG
 252         select SAMSUNG_DEV_ADC
 253         select SAMSUNG_DEV_PWM
 254         select SAMSUNG_DEV_TS
 255         help
 256             Shared machine support for SmartQ 5/7
 257
 258 config MACH_SMARTQ5
 259         bool "SmartQ 5"
 260         select MACH_SMARTQ
 261         help
 262             Machine support for the SmartQ 5
 263
 264 config MACH_SMARTQ7
 265         bool "SmartQ 7"
 266         select MACH_SMARTQ
 267         help
 268             Machine support for the SmartQ 7
 269
 270 config MACH_WLF_CRAGG_6410
 271         bool "Wolfson Cragganmore 6410"
 272         select CPU_S3C6410
 273         select I2C
 274         select LEDS_GPIO_REGISTER
 275         select S3C64XX_DEV_SPI0
 276         select S3C64XX_SETUP_FB_24BPP
 277         select S3C64XX_SETUP_I2C1
 278         select S3C64XX_SETUP_IDE
 279         select S3C64XX_SETUP_KEYPAD
 280         select S3C64XX_SETUP_SDHCI
 281         select S3C64XX_SETUP_SPI
 282         select S3C64XX_SETUP_USB_PHY
 283         select S3C_DEV_FB
 284         select S3C_DEV_HSMMC
 285         select S3C_DEV_HSMMC1
 286         select S3C_DEV_HSMMC2
 287         select S3C_DEV_I2C1
 288         select S3C_DEV_RTC
 289         select S3C_DEV_USB_HOST
 290         select S3C_DEV_USB_HSOTG
 291         select S3C_DEV_WDT
 292         select SAMSUNG_DEV_ADC
 293         select SAMSUNG_DEV_KEYPAD
 294         select SAMSUNG_DEV_PWM
 295         help
 296           Machine support for the Wolfson Cragganmore S3C6410 variant.
 297
 298 config MACH_S3C64XX_DT
 299         bool "Samsung S3C6400/S3C6410 machine using Device Tree"
 300         select CLKSRC_OF
 301         select CPU_S3C6400
 302         select CPU_S3C6410
 303         select PINCTRL
 304         select PINCTRL_S3C64XX
 305         select USE_OF
 306         help
 307           Machine support for Samsung S3C6400/S3C6410 machines with Device Tree
 308           enabled.
 309           Select this if a fdt blob is available for your S3C64XX SoC based
 310           board.
 311           Note: This is under development and not all peripherals can be
 312           supported with this machine file.
 313
 314 endif