arch/arm/mach-sa1100/hackkit.c

   1 /*
   2  * linux/arch/arm/mach-sa1100/hackkit.c
   3  *
   4  * Copyright (C) 2002 Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>
   5  *
   6  * This file contains all HackKit tweaks. Based on original work from
   7  * Nicolas Pitre's assabet fixes
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  *
  13  */
  14 #include <linux/init.h>
  15 #include <linux/kernel.h>
  16 #include <linux/sched.h>
  17 #include <linux/tty.h>
  18 #include <linux/module.h>
  19 #include <linux/errno.h>
  20 #include <linux/cpufreq.h>
  21 #include <linux/platform_data/sa11x0-serial.h>
  22 #include <linux/serial_core.h>
  23 #include <linux/mtd/mtd.h>
  24 #include <linux/mtd/partitions.h>
  25 #include <linux/tty.h>
  26 #include <linux/gpio.h>
  27 #include <linux/leds.h>
  28 #include <linux/platform_device.h>
  29
  30 #include <asm/mach-types.h>
  31 #include <asm/setup.h>
  32 #include <asm/page.h>
  33 #include <asm/pgtable.h>
  34
  35 #include <asm/mach/arch.h>
  36 #include <asm/mach/flash.h>
  37 #include <asm/mach/map.h>
  38 #include <asm/mach/irq.h>
  39
  40 #include <mach/hardware.h>
  41 #include <mach/irqs.h>
  42
  43 #include "generic.h"
  44
  45 /**********************************************************************
  46  *  prototypes
  47  */
  48
  49 /* init funcs */
  50 static void __init hackkit_map_io(void);
  51
  52 static u_int hackkit_get_mctrl(struct uart_port *port);
  53 static void hackkit_set_mctrl(struct uart_port *port, u_int mctrl);
  54 static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate);
  55
  56 /**********************************************************************
  57  *  global data
  58  */
  59
  60 /**********************************************************************
  61  *  static data
  62  */
  63
  64 static struct map_desc hackkit_io_desc[] __initdata = {
  65         {       /* Flash bank 0 */
  66                 .virtual        =  0xe8000000,
  67                 .pfn            = __phys_to_pfn(0x00000000),
  68                 .length         = 0x01000000,
  69                 .type           = MT_DEVICE
  70         },
  71 };
  72
  73 static struct sa1100_port_fns hackkit_port_fns __initdata = {
  74         .set_mctrl      = hackkit_set_mctrl,
  75         .get_mctrl      = hackkit_get_mctrl,
  76         .pm             = hackkit_uart_pm,
  77 };
  78
  79 /**********************************************************************
  80  *  Static functions
  81  */
  82
  83 static void __init hackkit_map_io(void)
  84 {
  85         sa1100_map_io();
  86         iotable_init(hackkit_io_desc, ARRAY_SIZE(hackkit_io_desc));
  87
  88         sa1100_register_uart_fns(&hackkit_port_fns);
  89         sa1100_register_uart(0, 1);     /* com port */
  90         sa1100_register_uart(1, 2);
  91         sa1100_register_uart(2, 3);     /* radio module */
  92
  93         Ser1SDCR0 |= SDCR0_SUS;
  94 }
  95
  96 /**
  97  *      hackkit_uart_pm - powermgmt callback function for system 3 UART
  98  *      @port: uart port structure
  99  *      @state: pm state
 100  *      @oldstate: old pm state
 101  *
 102  */
 103 static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
 104 {
 105         /* TODO: switch on/off uart in powersave mode */
 106 }
 107
 108 /*
 109  * Note! this can be called from IRQ context.
 110  * FIXME: No modem ctrl lines yet.
 111  */
 112 static void hackkit_set_mctrl(struct uart_port *port, u_int mctrl)
 113 {
 114 #if 0
 115         if (port->mapbase == _Ser1UTCR0) {
 116                 u_int set = 0, clear = 0;
 117
 118                 if (mctrl & TIOCM_RTS)
 119                         set |= PT_CTRL2_RS1_RTS;
 120                 else
 121                         clear |= PT_CTRL2_RS1_RTS;
 122
 123                 if (mctrl & TIOCM_DTR)
 124                         set |= PT_CTRL2_RS1_DTR;
 125                 else
 126                         clear |= PT_CTRL2_RS1_DTR;
 127
 128                 PTCTRL2_clear(clear);
 129                 PTCTRL2_set(set);
 130         }
 131 #endif
 132 }
 133
 134 static u_int hackkit_get_mctrl(struct uart_port *port)
 135 {
 136         u_int ret = 0;
 137 #if 0
 138         u_int irqsr = PT_IRQSR;
 139
 140         /* need 2 reads to read current value */
 141         irqsr = PT_IRQSR;
 142
 143         /* TODO: check IRQ source register for modem/com
 144          status lines and set them correctly. */
 145 #endif
 146
 147         ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
 148
 149         return ret;
 150 }
 151
 152 static struct mtd_partition hackkit_partitions[] = {
 153         {
 154                 .name           = "BLOB",
 155                 .size           = 0x00040000,
 156                 .offset         = 0x00000000,
 157                 .mask_flags     = MTD_WRITEABLE,  /* force read-only */
 158         }, {
 159                 .name           = "config",
 160                 .size           = 0x00040000,
 161                 .offset         = MTDPART_OFS_APPEND,
 162         }, {
 163                 .name           = "kernel",
 164                 .size           = 0x00100000,
 165                 .offset         = MTDPART_OFS_APPEND,
 166         }, {
 167                 .name           = "initrd",
 168                 .size           = 0x00180000,
 169                 .offset         = MTDPART_OFS_APPEND,
 170         }, {
 171                 .name           = "rootfs",
 172                 .size           = 0x700000,
 173                 .offset         = MTDPART_OFS_APPEND,
 174         }, {
 175                 .name           = "data",
 176                 .size           = MTDPART_SIZ_FULL,
 177                 .offset         = MTDPART_OFS_APPEND,
 178         }
 179 };
 180
 181 static struct flash_platform_data hackkit_flash_data = {
 182         .map_name       = "cfi_probe",
 183         .parts          = hackkit_partitions,
 184         .nr_parts       = ARRAY_SIZE(hackkit_partitions),
 185 };
 186
 187 static struct resource hackkit_flash_resource =
 188         DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
 189
 190 /* LEDs */
 191 struct gpio_led hackkit_gpio_leds[] = {
 192         {
 193                 .name                   = "hackkit:red",
 194                 .default_trigger        = "cpu0",
 195                 .gpio                   = 22,
 196         },
 197         {
 198                 .name                   = "hackkit:green",
 199                 .default_trigger        = "heartbeat",
 200                 .gpio                   = 23,
 201         },
 202 };
 203
 204 static struct gpio_led_platform_data hackkit_gpio_led_info = {
 205         .leds           = hackkit_gpio_leds,
 206         .num_leds       = ARRAY_SIZE(hackkit_gpio_leds),
 207 };
 208
 209 static struct platform_device hackkit_leds = {
 210         .name   = "leds-gpio",
 211         .id     = -1,
 212         .dev    = {
 213                 .platform_data  = &hackkit_gpio_led_info,
 214         }
 215 };
 216
 217 static void __init hackkit_init(void)
 218 {
 219         sa11x0_register_mtd(&hackkit_flash_data, &hackkit_flash_resource, 1);
 220         platform_device_register(&hackkit_leds);
 221 }
 222
 223 /**********************************************************************
 224  *  Exported Functions
 225  */
 226
 227 MACHINE_START(HACKKIT, "HackKit Cpu Board")
 228         .atag_offset    = 0x100,
 229         .map_io         = hackkit_map_io,
 230         .nr_irqs        = SA1100_NR_IRQS,
 231         .init_irq       = sa1100_init_irq,
 232         .timer          = &sa1100_timer,
 233         .init_machine   = hackkit_init,
 234         .init_late      = sa11x0_init_late,
 235         .restart        = sa11x0_restart,
 236 MACHINE_END