arch/arm/mach-ux500/board-mop500.h

   1 /*
   2  * Copyright (C) ST-Ericsson SA 2010
   3  *
   4  * License terms: GNU General Public License (GPL) version 2
   5  */
   6
   7 #ifndef __BOARD_MOP500_H
   8 #define __BOARD_MOP500_H
   9
  10 /* For NOMADIK_NR_GPIO */
  11 #include <mach/irqs.h>
  12
  13 /* Snowball specific GPIO assignments, this board has no GPIO expander */
  14 #define SNOWBALL_ACCEL_INT1_GPIO        163
  15 #define SNOWBALL_ACCEL_INT2_GPIO        164
  16 #define SNOWBALL_MAGNET_DRDY_GPIO       165
  17 #define SNOWBALL_SDMMC_EN_GPIO          217
  18 #define SNOWBALL_SDMMC_1V8_3V_GPIO      228
  19 #define SNOWBALL_SDMMC_CD_GPIO          218
  20
  21 /* HREFv60-specific GPIO assignments, this board has no GPIO expander */
  22 #define HREFV60_SDMMC_1V8_3V_GPIO       5
  23 #define HREFV60_CAMERA_FLASH_ENABLE     21
  24 #define HREFV60_MAGNET_DRDY_GPIO        32
  25 #define HREFV60_DISP1_RST_GPIO          65
  26 #define HREFV60_DISP2_RST_GPIO          66
  27 #define HREFV60_ACCEL_INT1_GPIO         82
  28 #define HREFV60_ACCEL_INT2_GPIO         83
  29 #define HREFV60_SDMMC_CD_GPIO           95
  30 #define HREFV60_XSHUTDOWN_SECONDARY_SENSOR 140
  31 #define HREFV60_TOUCH_RST_GPIO          143
  32 #define HREFV60_HAL_SW_GPIO             145
  33 #define HREFV60_SDMMC_EN_GPIO           169
  34 #define HREFV60_MMIO_XENON_CHARGE       170
  35 #define HREFV60_PROX_SENSE_GPIO         217
  36
  37 /* MOP500 generic GPIOs */
  38 #define CAMERA_FLASH_INT_PIN            7
  39 #define CYPRESS_TOUCH_INT_PIN           84
  40 #define XSHUTDOWN_PRIMARY_SENSOR        141
  41 #define XSHUTDOWN_SECONDARY_SENSOR      142
  42 #define CYPRESS_TOUCH_RST_GPIO          143
  43 #define MOP500_HDMI_RST_GPIO            196
  44 #define CYPRESS_SLAVE_SELECT_GPIO       216
  45
  46 /* GPIOs on the TC35892 expander */
  47 #define MOP500_EGPIO(x)                 (NOMADIK_NR_GPIO + (x))
  48 #define GPIO_MAGNET_DRDY                MOP500_EGPIO(1)
  49 #define GPIO_SDMMC_CD                   MOP500_EGPIO(3)
  50 #define GPIO_CAMERA_FLASH_ENABLE        MOP500_EGPIO(4)
  51 #define GPIO_MMIO_XENON_CHARGE          MOP500_EGPIO(5)
  52 #define GPIO_PROX_SENSOR                MOP500_EGPIO(7)
  53 #define GPIO_HAL_SENSOR                 MOP500_EGPIO(8)
  54 #define GPIO_ACCEL_INT1                 MOP500_EGPIO(10)
  55 #define GPIO_ACCEL_INT2                 MOP500_EGPIO(11)
  56 #define GPIO_BU21013_CS                 MOP500_EGPIO(13)
  57 #define MOP500_DISP2_RST_GPIO           MOP500_EGPIO(14)
  58 #define MOP500_DISP1_RST_GPIO           MOP500_EGPIO(15)
  59 #define GPIO_SDMMC_EN                   MOP500_EGPIO(17)
  60 #define GPIO_SDMMC_1V8_3V_SEL           MOP500_EGPIO(18)
  61 #define MOP500_EGPIO_END                MOP500_EGPIO(24)
  62
  63 /*
  64  * GPIOs on the AB8500 mixed-signals circuit
  65  * Notice that we subtract 1 from the number passed into the macro, this is
  66  * because the AB8500 GPIO pins are enumbered starting from 1, so the value in
  67  * parens matches the GPIO pin number in the data sheet.
  68  */
  69 #define MOP500_AB8500_PIN_GPIO(x)       (MOP500_EGPIO_END + (x) - 1)
  70 /*Snowball AB8500 GPIO */
  71 #define SNOWBALL_VSMPS2_1V8_GPIO        MOP500_AB8500_PIN_GPIO(1)       /* SYSCLKREQ2/GPIO1 */
  72 #define SNOWBALL_PM_GPIO1_GPIO          MOP500_AB8500_PIN_GPIO(2)       /* SYSCLKREQ3/GPIO2 */
  73 #define SNOWBALL_WLAN_CLK_REQ_GPIO      MOP500_AB8500_PIN_GPIO(3)       /* SYSCLKREQ4/GPIO3 */
  74 #define SNOWBALL_PM_GPIO4_GPIO          MOP500_AB8500_PIN_GPIO(4)       /* SYSCLKREQ6/GPIO4 */
  75 #define SNOWBALL_EN_3V6_GPIO            MOP500_AB8500_PIN_GPIO(16)      /* PWMOUT3/GPIO16 */
  76 #define SNOWBALL_PME_ETH_GPIO           MOP500_AB8500_PIN_GPIO(24)      /* SYSCLKREQ7/GPIO24 */
  77 #define SNOWBALL_EN_3V3_ETH_GPIO        MOP500_AB8500_PIN_GPIO(26)      /* GPIO26 */
  78
  79 struct device;
  80 struct i2c_board_info;
  81
  82 extern void mop500_sdi_init(struct device *parent);
  83 extern void snowball_sdi_init(struct device *parent);
  84 extern void hrefv60_sdi_init(struct device *parent);
  85 extern void mop500_sdi_tc35892_init(struct device *parent);
  86 void __init mop500_u8500uib_init(void);
  87 void __init mop500_stuib_init(void);
  88 void __init mop500_pinmaps_init(void);
  89 void __init snowball_pinmaps_init(void);
  90 void __init hrefv60_pinmaps_init(void);
  91
  92 void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
  93                 unsigned n);
  94
  95 /* TODO: Once all pieces are DT:ed, remove completely. */
  96 struct device * __init u8500_of_init_devices(void);
  97
  98 #endif