Merge remote-tracking branch 'origin' into irqdomain/next
[deliverable/linux.git] / arch / arm / plat-mxc / tzic.c
1 /*
2 * Copyright (C)2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
11
12 #include <linux/module.h>
13 #include <linux/moduleparam.h>
14 #include <linux/init.h>
15 #include <linux/device.h>
16 #include <linux/errno.h>
17 #include <linux/io.h>
18 #include <linux/irqdomain.h>
19 #include <linux/of.h>
20
21 #include <asm/mach/irq.h>
22 #include <asm/exception.h>
23
24 #include <mach/hardware.h>
25 #include <mach/common.h>
26
27 #include "irq-common.h"
28
29 /*
30 *****************************************
31 * TZIC Registers *
32 *****************************************
33 */
34
35 #define TZIC_INTCNTL 0x0000 /* Control register */
36 #define TZIC_INTTYPE 0x0004 /* Controller Type register */
37 #define TZIC_IMPID 0x0008 /* Distributor Implementer Identification */
38 #define TZIC_PRIOMASK 0x000C /* Priority Mask Reg */
39 #define TZIC_SYNCCTRL 0x0010 /* Synchronizer Control register */
40 #define TZIC_DSMINT 0x0014 /* DSM interrupt Holdoffregister */
41 #define TZIC_INTSEC0(i) (0x0080 + ((i) << 2)) /* Interrupt Security Reg 0 */
42 #define TZIC_ENSET0(i) (0x0100 + ((i) << 2)) /* Enable Set Reg 0 */
43 #define TZIC_ENCLEAR0(i) (0x0180 + ((i) << 2)) /* Enable Clear Reg 0 */
44 #define TZIC_SRCSET0 0x0200 /* Source Set Register 0 */
45 #define TZIC_SRCCLAR0 0x0280 /* Source Clear Register 0 */
46 #define TZIC_PRIORITY0 0x0400 /* Priority Register 0 */
47 #define TZIC_PND0 0x0D00 /* Pending Register 0 */
48 #define TZIC_HIPND(i) (0x0D80+ ((i) << 2)) /* High Priority Pending Register */
49 #define TZIC_WAKEUP0(i) (0x0E00 + ((i) << 2)) /* Wakeup Config Register */
50 #define TZIC_SWINT 0x0F00 /* Software Interrupt Rigger Register */
51 #define TZIC_ID0 0x0FD0 /* Indentification Register 0 */
52
53 void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */
54 static struct irq_domain *domain;
55
56 #define TZIC_NUM_IRQS 128
57
58 #ifdef CONFIG_FIQ
59 static int tzic_set_irq_fiq(unsigned int irq, unsigned int type)
60 {
61 unsigned int index, mask, value;
62
63 index = irq >> 5;
64 if (unlikely(index >= 4))
65 return -EINVAL;
66 mask = 1U << (irq & 0x1F);
67
68 value = __raw_readl(tzic_base + TZIC_INTSEC0(index)) | mask;
69 if (type)
70 value &= ~mask;
71 __raw_writel(value, tzic_base + TZIC_INTSEC0(index));
72
73 return 0;
74 }
75 #else
76 #define tzic_set_irq_fiq NULL
77 #endif
78
79 #ifdef CONFIG_PM
80 static void tzic_irq_suspend(struct irq_data *d)
81 {
82 struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
83 int idx = d->hwirq >> 5;
84
85 __raw_writel(gc->wake_active, tzic_base + TZIC_WAKEUP0(idx));
86 }
87
88 static void tzic_irq_resume(struct irq_data *d)
89 {
90 int idx = d->hwirq >> 5;
91
92 __raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(idx)),
93 tzic_base + TZIC_WAKEUP0(idx));
94 }
95
96 #else
97 #define tzic_irq_suspend NULL
98 #define tzic_irq_resume NULL
99 #endif
100
101 static struct mxc_extra_irq tzic_extra_irq = {
102 #ifdef CONFIG_FIQ
103 .set_irq_fiq = tzic_set_irq_fiq,
104 #endif
105 };
106
107 static __init void tzic_init_gc(int idx, unsigned int irq_start)
108 {
109 struct irq_chip_generic *gc;
110 struct irq_chip_type *ct;
111
112 gc = irq_alloc_generic_chip("tzic", 1, irq_start, tzic_base,
113 handle_level_irq);
114 gc->private = &tzic_extra_irq;
115 gc->wake_enabled = IRQ_MSK(32);
116
117 ct = gc->chip_types;
118 ct->chip.irq_mask = irq_gc_mask_disable_reg;
119 ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
120 ct->chip.irq_set_wake = irq_gc_set_wake;
121 ct->chip.irq_suspend = tzic_irq_suspend;
122 ct->chip.irq_resume = tzic_irq_resume;
123 ct->regs.disable = TZIC_ENCLEAR0(idx);
124 ct->regs.enable = TZIC_ENSET0(idx);
125
126 irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0);
127 }
128
129 asmlinkage void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs)
130 {
131 u32 stat;
132 int i, irqofs, handled;
133
134 do {
135 handled = 0;
136
137 for (i = 0; i < 4; i++) {
138 stat = __raw_readl(tzic_base + TZIC_HIPND(i)) &
139 __raw_readl(tzic_base + TZIC_INTSEC0(i));
140
141 while (stat) {
142 handled = 1;
143 irqofs = fls(stat) - 1;
144 handle_IRQ(irq_find_mapping(domain,
145 irqofs + i * 32), regs);
146 stat &= ~(1 << irqofs);
147 }
148 }
149 } while (handled);
150 }
151
152 /*
153 * This function initializes the TZIC hardware and disables all the
154 * interrupts. It registers the interrupt enable and disable functions
155 * to the kernel for each interrupt source.
156 */
157 void __init tzic_init_irq(void __iomem *irqbase)
158 {
159 struct device_node *np;
160 int irq_base;
161 int i;
162
163 tzic_base = irqbase;
164 /* put the TZIC into the reset value with
165 * all interrupts disabled
166 */
167 i = __raw_readl(tzic_base + TZIC_INTCNTL);
168
169 __raw_writel(0x80010001, tzic_base + TZIC_INTCNTL);
170 __raw_writel(0x1f, tzic_base + TZIC_PRIOMASK);
171 __raw_writel(0x02, tzic_base + TZIC_SYNCCTRL);
172
173 for (i = 0; i < 4; i++)
174 __raw_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i));
175
176 /* disable all interrupts */
177 for (i = 0; i < 4; i++)
178 __raw_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i));
179
180 /* all IRQ no FIQ Warning :: No selection */
181
182 irq_base = irq_alloc_descs(-1, 0, TZIC_NUM_IRQS, numa_node_id());
183 WARN_ON(irq_base < 0);
184
185 np = of_find_compatible_node(NULL, NULL, "fsl,tzic");
186 domain = irq_domain_add_legacy(np, TZIC_NUM_IRQS, irq_base, 0,
187 &irq_domain_simple_ops, NULL);
188 WARN_ON(!domain);
189
190 for (i = 0; i < 4; i++, irq_base += 32)
191 tzic_init_gc(i, irq_base);
192
193 #ifdef CONFIG_FIQ
194 /* Initialize FIQ */
195 init_FIQ(FIQ_START);
196 #endif
197
198 pr_info("TrustZone Interrupt Controller (TZIC) initialized\n");
199 }
200
201 /**
202 * tzic_enable_wake() - enable wakeup interrupt
203 *
204 * @return 0 if successful; non-zero otherwise
205 *
206 * This function provides an interrupt synchronization point that is required
207 * by tzic enabled platforms before entering imx specific low power modes (ie,
208 * those low power modes beyond the WAIT_CLOCKED basic ARM WFI only mode).
209 */
210 int tzic_enable_wake(void)
211 {
212 unsigned int i;
213
214 __raw_writel(1, tzic_base + TZIC_DSMINT);
215 if (unlikely(__raw_readl(tzic_base + TZIC_DSMINT) == 0))
216 return -EAGAIN;
217
218 for (i = 0; i < 4; i++)
219 __raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(i)),
220 tzic_base + TZIC_WAKEUP0(i));
221
222 return 0;
223 }
This page took 0.035432 seconds and 6 git commands to generate.