arch/arm/plat-omap/Kconfig

   1 if ARCH_OMAP
   2
   3 menu "TI OMAP Common Features"
   4
   5 config ARCH_OMAP_OTG
   6         bool
   7
   8 choice
   9         prompt "OMAP System Type"
  10         default ARCH_OMAP2PLUS
  11
  12 config ARCH_OMAP1
  13         bool "TI OMAP1"
  14         select CLKDEV_LOOKUP
  15         select CLKSRC_MMIO
  16         select GENERIC_IRQ_CHIP
  17         help
  18           "Systems based on omap7xx, omap15xx or omap16xx"
  19
  20 config ARCH_OMAP2PLUS
  21         bool "TI OMAP2/3/4"
  22         select CLKDEV_LOOKUP
  23         select GENERIC_IRQ_CHIP
  24         select OMAP_DM_TIMER
  25         help
  26           "Systems based on OMAP2, OMAP3 or OMAP4"
  27
  28 endchoice
  29
  30 comment "OMAP Feature Selections"
  31
  32 config OMAP_DEBUG_DEVICES
  33         bool
  34         help
  35           For debug cards on TI reference boards.
  36
  37 config OMAP_DEBUG_LEDS
  38         bool
  39         depends on OMAP_DEBUG_DEVICES
  40         default y if LEDS_CLASS
  41
  42 config OMAP_SMARTREFLEX
  43         bool "SmartReflex support"
  44         depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM
  45         help
  46           Say Y if you want to enable SmartReflex.
  47
  48           SmartReflex can perform continuous dynamic voltage
  49           scaling around the nominal operating point voltage
  50           according to silicon characteristics and operating
  51           conditions. Enabling SmartReflex reduces power
  52           consumption.
  53
  54           Please note, that by default SmartReflex is only
  55           initialized. To enable the automatic voltage
  56           compensation for vdd mpu  and vdd core from user space,
  57           user must write 1 to
  58                 /debug/voltage/vdd_<X>/smartreflex/autocomp,
  59           where X is mpu or core for OMAP3.
  60           Optionally autocompensation can be enabled in the kernel
  61           by default during system init via the enable_on_init flag
  62           which an be passed as platform data to the smartreflex driver.
  63
  64 config OMAP_SMARTREFLEX_CLASS3
  65         bool "Class 3 mode of Smartreflex Implementation"
  66         depends on OMAP_SMARTREFLEX && TWL4030_CORE
  67         help
  68           Say Y to enable Class 3 implementation of Smartreflex
  69
  70           Class 3 implementation of Smartreflex employs continuous hardware
  71           voltage calibration.
  72
  73 config OMAP_RESET_CLOCKS
  74         bool "Reset unused clocks during boot"
  75         depends on ARCH_OMAP
  76         help
  77           Say Y if you want to reset unused clocks during boot.
  78           This option saves power, but assumes all drivers are
  79           using the clock framework. Broken drivers that do not
  80           yet use clock framework may not work with this option.
  81           If you are booting from another operating system, you
  82           probably do not want this option enabled until your
  83           device drivers work properly.
  84
  85 config OMAP_MUX
  86         bool "OMAP multiplexing support"
  87         depends on ARCH_OMAP
  88         default y
  89         help
  90           Pin multiplexing support for OMAP boards. If your bootloader
  91           sets the multiplexing correctly, say N. Otherwise, or if unsure,
  92           say Y.
  93
  94 config OMAP_MUX_DEBUG
  95         bool "Multiplexing debug output"
  96         depends on OMAP_MUX
  97         help
  98           Makes the multiplexing functions print out a lot of debug info.
  99           This is useful if you want to find out the correct values of the
 100           multiplexing registers.
 101
 102 config OMAP_MUX_WARNINGS
 103         bool "Warn about pins the bootloader didn't set up"
 104         depends on OMAP_MUX
 105         default y
 106         help
 107           Choose Y here to warn whenever driver initialization logic needs
 108           to change the pin multiplexing setup.  When there are no warnings
 109           printed, it's safe to deselect OMAP_MUX for your product.
 110
 111 config OMAP_MCBSP
 112         bool "McBSP support"
 113         depends on ARCH_OMAP
 114         default y
 115         help
 116           Say Y here if you want support for the OMAP Multichannel
 117           Buffered Serial Port.
 118
 119 config OMAP_MBOX_FWK
 120         tristate "Mailbox framework support"
 121         depends on ARCH_OMAP
 122         help
 123           Say Y here if you want to use OMAP Mailbox framework support for
 124           DSP, IVA1.0 and IVA2 in OMAP1/2/3.
 125
 126 config OMAP_MBOX_KFIFO_SIZE
 127         int "Mailbox kfifo default buffer size (bytes)"
 128         depends on OMAP_MBOX_FWK
 129         default 256
 130         help
 131           Specify the default size of mailbox's kfifo buffers (bytes).
 132           This can also be changed at runtime (via the mbox_kfifo_size
 133           module parameter).
 134
 135 config OMAP_IOMMU
 136         tristate
 137
 138 config OMAP_IOMMU_DEBUG
 139        tristate "Export OMAP IOMMU internals in DebugFS"
 140        depends on OMAP_IOMMU && DEBUG_FS
 141        help
 142          Select this to see extensive information about
 143          the internal state of OMAP IOMMU in debugfs.
 144
 145          Say N unless you know you need this.
 146
 147 config OMAP_IOMMU_IVA2
 148         bool
 149
 150 config OMAP_MPU_TIMER
 151         bool "Use mpu timer"
 152         depends on ARCH_OMAP1
 153         help
 154           Select this option if you want to use the OMAP mpu timer. This
 155           timer provides more intra-tick resolution than the 32KHz timer,
 156           but consumes more power.
 157
 158 config OMAP_32K_TIMER
 159         bool "Use 32KHz timer"
 160         depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
 161         default y if (ARCH_OMAP16XX || ARCH_OMAP2PLUS)
 162         help
 163           Select this option if you want to enable the OMAP 32KHz timer.
 164           This timer saves power compared to the OMAP_MPU_TIMER, and has
 165           support for no tick during idle. The 32KHz timer provides less
 166           intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
 167           currently only available for OMAP16XX, 24XX, 34XX and OMAP4.
 168
 169 config OMAP3_L2_AUX_SECURE_SAVE_RESTORE
 170         bool "OMAP3 HS/EMU save and restore for L2 AUX control register"
 171         depends on ARCH_OMAP3 && PM
 172         default n
 173         help
 174           Without this option, L2 Auxiliary control register contents are
 175           lost during off-mode entry on HS/EMU devices. This feature
 176           requires support from PPA / boot-loader in HS/EMU devices, which
 177           currently does not exist by default.
 178
 179 config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
 180         int "Service ID for the support routine to set L2 AUX control"
 181         depends on OMAP3_L2_AUX_SECURE_SAVE_RESTORE
 182         default 43
 183         help
 184           PPA routine service ID for setting L2 auxiliary control register.
 185
 186 config OMAP_32K_TIMER_HZ
 187         int "Kernel internal timer frequency for 32KHz timer"
 188         range 32 1024
 189         depends on OMAP_32K_TIMER
 190         default "128"
 191         help
 192           Kernel internal timer frequency should be a divisor of 32768,
 193           such as 64 or 128.
 194
 195 config OMAP_DM_TIMER
 196         bool "Use dual-mode timer"
 197         depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
 198         help
 199          Select this option if you want to use OMAP Dual-Mode timers.
 200
 201 config OMAP_SERIAL_WAKE
 202         bool "Enable wake-up events for serial ports"
 203         depends on ARCH_OMAP1 && OMAP_MUX
 204         default y
 205         help
 206           Select this option if you want to have your system wake up
 207           to data on the serial RX line. This allows you to wake the
 208           system from serial console.
 209
 210 choice
 211         prompt "OMAP PM layer selection"
 212         depends on ARCH_OMAP
 213         default OMAP_PM_NOOP
 214
 215 config OMAP_PM_NOOP
 216         bool "No-op/debug PM layer"
 217
 218 endchoice
 219
 220 endmenu
 221
 222 endif