arch/arm/plat-omap/Kconfig

   1 config ARCH_OMAP
   2         bool
   3
   4 if ARCH_OMAP
   5
   6 menu "TI OMAP Common Features"
   7
   8 config ARCH_OMAP_OTG
   9         bool
  10
  11 comment "OMAP Feature Selections"
  12
  13 config OMAP_DEBUG_DEVICES
  14         bool
  15         help
  16           For debug cards on TI reference boards.
  17
  18 config OMAP_DEBUG_LEDS
  19         def_bool y if NEW_LEDS
  20         depends on OMAP_DEBUG_DEVICES
  21         select LEDS_CLASS
  22
  23 config POWER_AVS_OMAP
  24         bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"
  25         depends on POWER_AVS && (ARCH_OMAP3 || ARCH_OMAP4) && PM
  26         select POWER_SUPPLY
  27         help
  28           Say Y to enable AVS(Adaptive Voltage Scaling)
  29           support on OMAP containing the version 1 or
  30           version 2 of the SmartReflex IP.
  31           V1 is the 65nm version used in OMAP3430.
  32           V2 is the update for the 45nm version of the IP used in OMAP3630
  33           and OMAP4430
  34
  35           Please note, that by default SmartReflex is only
  36           initialized and not enabled. To enable the automatic voltage
  37           compensation for vdd mpu and vdd core from user space,
  38           user must write 1 to
  39                 /debug/smartreflex/sr_<X>/autocomp,
  40           where X is mpu_iva or core for OMAP3.
  41           Optionally autocompensation can be enabled in the kernel
  42           by default during system init via the enable_on_init flag
  43           which an be passed as platform data to the smartreflex driver.
  44
  45 config POWER_AVS_OMAP_CLASS3
  46         bool "Class 3 mode of Smartreflex Implementation"
  47         depends on POWER_AVS_OMAP && TWL4030_CORE
  48         help
  49           Say Y to enable Class 3 implementation of Smartreflex
  50
  51           Class 3 implementation of Smartreflex employs continuous hardware
  52           voltage calibration.
  53
  54 config OMAP_RESET_CLOCKS
  55         bool "Reset unused clocks during boot"
  56         depends on ARCH_OMAP
  57         help
  58           Say Y if you want to reset unused clocks during boot.
  59           This option saves power, but assumes all drivers are
  60           using the clock framework. Broken drivers that do not
  61           yet use clock framework may not work with this option.
  62           If you are booting from another operating system, you
  63           probably do not want this option enabled until your
  64           device drivers work properly.
  65
  66 config OMAP_MUX
  67         bool "OMAP multiplexing support"
  68         depends on ARCH_OMAP
  69         default y
  70         help
  71           Pin multiplexing support for OMAP boards. If your bootloader
  72           sets the multiplexing correctly, say N. Otherwise, or if unsure,
  73           say Y.
  74
  75 config OMAP_MUX_DEBUG
  76         bool "Multiplexing debug output"
  77         depends on OMAP_MUX
  78         help
  79           Makes the multiplexing functions print out a lot of debug info.
  80           This is useful if you want to find out the correct values of the
  81           multiplexing registers.
  82
  83 config OMAP_MUX_WARNINGS
  84         bool "Warn about pins the bootloader didn't set up"
  85         depends on OMAP_MUX
  86         default y
  87         help
  88           Choose Y here to warn whenever driver initialization logic needs
  89           to change the pin multiplexing setup.  When there are no warnings
  90           printed, it's safe to deselect OMAP_MUX for your product.
  91
  92 config OMAP_MPU_TIMER
  93         bool "Use mpu timer"
  94         depends on ARCH_OMAP1
  95         help
  96           Select this option if you want to use the OMAP mpu timer. This
  97           timer provides more intra-tick resolution than the 32KHz timer,
  98           but consumes more power.
  99
 100 config OMAP_32K_TIMER
 101         bool "Use 32KHz timer"
 102         depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
 103         default y if (ARCH_OMAP16XX || ARCH_OMAP2PLUS)
 104         help
 105           Select this option if you want to enable the OMAP 32KHz timer.
 106           This timer saves power compared to the OMAP_MPU_TIMER, and has
 107           support for no tick during idle. The 32KHz timer provides less
 108           intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
 109           currently only available for OMAP16XX, 24XX, 34XX, OMAP4/5 and DRA7XX.
 110
 111           On OMAP2PLUS this value is only used for CONFIG_HZ and
 112           CLOCK_TICK_RATE compile time calculation.
 113           The actual timer selection is done in the board file
 114           through the (DT_)MACHINE_START structure.
 115
 116
 117 config OMAP3_L2_AUX_SECURE_SAVE_RESTORE
 118         bool "OMAP3 HS/EMU save and restore for L2 AUX control register"
 119         depends on ARCH_OMAP3 && PM
 120         default n
 121         help
 122           Without this option, L2 Auxiliary control register contents are
 123           lost during off-mode entry on HS/EMU devices. This feature
 124           requires support from PPA / boot-loader in HS/EMU devices, which
 125           currently does not exist by default.
 126
 127 config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
 128         int "Service ID for the support routine to set L2 AUX control"
 129         depends on OMAP3_L2_AUX_SECURE_SAVE_RESTORE
 130         default 43
 131         help
 132           PPA routine service ID for setting L2 auxiliary control register.
 133
 134 config OMAP_DM_TIMER
 135         bool "Use dual-mode timer"
 136         depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
 137         help
 138          Select this option if you want to use OMAP Dual-Mode timers.
 139
 140 config OMAP_SERIAL_WAKE
 141         bool "Enable wake-up events for serial ports"
 142         depends on ARCH_OMAP1 && OMAP_MUX
 143         default y
 144         help
 145           Select this option if you want to have your system wake up
 146           to data on the serial RX line. This allows you to wake the
 147           system from serial console.
 148
 149 choice
 150         prompt "OMAP PM layer selection"
 151         depends on ARCH_OMAP
 152         default OMAP_PM_NOOP
 153
 154 config OMAP_PM_NOOP
 155         bool "No-op/debug PM layer"
 156
 157 endchoice
 158
 159 endmenu
 160
 161 endif