arch/arm/plat-omap/include/mach/sdrc.h

   1 #ifndef ____ASM_ARCH_SDRC_H
   2 #define ____ASM_ARCH_SDRC_H
   3
   4 /*
   5  * OMAP2/3 SDRC/SMS register definitions
   6  *
   7  * Copyright (C) 2007-2008 Texas Instruments, Inc.
   8  * Copyright (C) 2007-2008 Nokia Corporation
   9  *
  10  * Tony Lindgren
  11  * Paul Walmsley
  12  * Richard Woodruff
  13  *
  14  * This program is free software; you can redistribute it and/or modify
  15  * it under the terms of the GNU General Public License version 2 as
  16  * published by the Free Software Foundation.
  17  */
  18
  19 #include <mach/io.h>
  20
  21 /* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
  22
  23 #define SDRC_SYSCONFIG          0x010
  24 #define SDRC_DLLA_CTRL          0x060
  25 #define SDRC_DLLA_STATUS        0x064
  26 #define SDRC_DLLB_CTRL          0x068
  27 #define SDRC_DLLB_STATUS        0x06C
  28 #define SDRC_POWER              0x070
  29 #define SDRC_MR_0               0x084
  30 #define SDRC_ACTIM_CTRL_A_0     0x09c
  31 #define SDRC_ACTIM_CTRL_B_0     0x0a0
  32 #define SDRC_RFR_CTRL_0         0x0a4
  33
  34 /*
  35  * These values represent the number of memory clock cycles between
  36  * autorefresh initiation.  They assume 1 refresh per 64 ms (JEDEC), 8192
  37  * rows per device, and include a subtraction of a 50 cycle window in the
  38  * event that the autorefresh command is delayed due to other SDRC activity.
  39  * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
  40  * counter reaches 0.
  41  *
  42  * These represent optimal values for common parts, it won't work for all.
  43  * As long as you scale down, most parameters are still work, they just
  44  * become sub-optimal. The RFR value goes in the opposite direction. If you
  45  * don't adjust it down as your clock period increases the refresh interval
  46  * will not be met. Setting all parameters for complete worst case may work,
  47  * but may cut memory performance by 2x. Due to errata the DLLs need to be
  48  * unlocked and their value needs run time calibration. A dynamic call is
  49  * need for that as no single right value exists acorss production samples.
  50  *
  51  * Only the FULL speed values are given. Current code is such that rate
  52  * changes must be made at DPLLoutx2. The actual value adjustment for low
  53  * frequency operation will be handled by omap_set_performance()
  54  *
  55  * By having the boot loader boot up in the fastest L4 speed available likely
  56  * will result in something which you can switch between.
  57  */
  58 #define SDRC_RFR_CTRL_165MHz    (0x00044c00 | 1)
  59 #define SDRC_RFR_CTRL_133MHz    (0x0003de00 | 1)
  60 #define SDRC_RFR_CTRL_100MHz    (0x0002da01 | 1)
  61 #define SDRC_RFR_CTRL_110MHz    (0x0002da01 | 1) /* Need to calc */
  62 #define SDRC_RFR_CTRL_BYPASS    (0x00005000 | 1) /* Need to calc */
  63
  64
  65 /*
  66  * SMS register access
  67  */
  68
  69 #define OMAP242X_SMS_REGADDR(reg)                                       \
  70                         (void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
  71 #define OMAP243X_SMS_REGADDR(reg)                                       \
  72                         (void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
  73 #define OMAP343X_SMS_REGADDR(reg)                                       \
  74                         (void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
  75
  76 /* SMS register offsets - read/write with sms_{read,write}_reg() */
  77
  78 #define SMS_SYSCONFIG           0x010
  79 /* REVISIT: fill in other SMS registers here */
  80
  81
  82 #ifndef __ASSEMBLER__
  83
  84 void __init omap2_sdrc_init(void);
  85
  86 #ifdef CONFIG_ARCH_OMAP2
  87
  88 struct memory_timings {
  89         u32 m_type;             /* ddr = 1, sdr = 0 */
  90         u32 dll_mode;           /* use lock mode = 1, unlock mode = 0 */
  91         u32 slow_dll_ctrl;      /* unlock mode, dll value for slow speed */
  92         u32 fast_dll_ctrl;      /* unlock mode, dll value for fast speed */
  93         u32 base_cs;            /* base chip select to use for calculations */
  94 };
  95
  96 extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
  97
  98 u32 omap2xxx_sdrc_dll_is_unlocked(void);
  99 u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
 100
 101 #endif  /* CONFIG_ARCH_OMAP2 */
 102
 103 #endif  /* __ASSEMBLER__ */
 104
 105 #endif