arch/arm/plat-omap/include/plat/omap_hwmod.h

   1 /*
   2  * omap_hwmod macros, structures
   3  *
   4  * Copyright (C) 2009-2011 Nokia Corporation
   5  * Copyright (C) 2011 Texas Instruments, Inc.
   6  * Paul Walmsley
   7  *
   8  * Created in collaboration with (alphabetical order): Benoît Cousson,
   9  * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
  10  * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
  11  *
  12  * This program is free software; you can redistribute it and/or modify
  13  * it under the terms of the GNU General Public License version 2 as
  14  * published by the Free Software Foundation.
  15  *
  16  * These headers and macros are used to define OMAP on-chip module
  17  * data and their integration with other OMAP modules and Linux.
  18  * Copious documentation and references can also be found in the
  19  * omap_hwmod code, in arch/arm/mach-omap2/omap_hwmod.c (as of this
  20  * writing).
  21  *
  22  * To do:
  23  * - add interconnect error log structures
  24  * - add pinmuxing
  25  * - init_conn_id_bit (CONNID_BIT_VECTOR)
  26  * - implement default hwmod SMS/SDRC flags?
  27  * - move Linux-specific data ("non-ROM data") out
  28  *
  29  */
  30 #ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
  31 #define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
  32
  33 #include <linux/kernel.h>
  34 #include <linux/init.h>
  35 #include <linux/list.h>
  36 #include <linux/ioport.h>
  37 #include <linux/spinlock.h>
  38 #include <plat/cpu.h>
  39
  40 struct omap_device;
  41
  42 extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1;
  43 extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
  44
  45 /*
  46  * OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant
  47  * with the original PRCM protocol defined for OMAP2420
  48  */
  49 #define SYSC_TYPE1_MIDLEMODE_SHIFT      12
  50 #define SYSC_TYPE1_MIDLEMODE_MASK       (0x3 << SYSC_MIDLEMODE_SHIFT)
  51 #define SYSC_TYPE1_CLOCKACTIVITY_SHIFT  8
  52 #define SYSC_TYPE1_CLOCKACTIVITY_MASK   (0x3 << SYSC_CLOCKACTIVITY_SHIFT)
  53 #define SYSC_TYPE1_SIDLEMODE_SHIFT      3
  54 #define SYSC_TYPE1_SIDLEMODE_MASK       (0x3 << SYSC_SIDLEMODE_SHIFT)
  55 #define SYSC_TYPE1_ENAWAKEUP_SHIFT      2
  56 #define SYSC_TYPE1_ENAWAKEUP_MASK       (1 << SYSC_ENAWAKEUP_SHIFT)
  57 #define SYSC_TYPE1_SOFTRESET_SHIFT      1
  58 #define SYSC_TYPE1_SOFTRESET_MASK       (1 << SYSC_SOFTRESET_SHIFT)
  59 #define SYSC_TYPE1_AUTOIDLE_SHIFT       0
  60 #define SYSC_TYPE1_AUTOIDLE_MASK        (1 << SYSC_AUTOIDLE_SHIFT)
  61
  62 /*
  63  * OCP SYSCONFIG bit shifts/masks TYPE2. These are for IPs compliant
  64  * with the new PRCM protocol defined for new OMAP4 IPs.
  65  */
  66 #define SYSC_TYPE2_SOFTRESET_SHIFT      0
  67 #define SYSC_TYPE2_SOFTRESET_MASK       (1 << SYSC_TYPE2_SOFTRESET_SHIFT)
  68 #define SYSC_TYPE2_SIDLEMODE_SHIFT      2
  69 #define SYSC_TYPE2_SIDLEMODE_MASK       (0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT)
  70 #define SYSC_TYPE2_MIDLEMODE_SHIFT      4
  71 #define SYSC_TYPE2_MIDLEMODE_MASK       (0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT)
  72
  73 /* OCP SYSSTATUS bit shifts/masks */
  74 #define SYSS_RESETDONE_SHIFT            0
  75 #define SYSS_RESETDONE_MASK             (1 << SYSS_RESETDONE_SHIFT)
  76
  77 /* Master standby/slave idle mode flags */
  78 #define HWMOD_IDLEMODE_FORCE            (1 << 0)
  79 #define HWMOD_IDLEMODE_NO               (1 << 1)
  80 #define HWMOD_IDLEMODE_SMART            (1 << 2)
  81 #define HWMOD_IDLEMODE_SMART_WKUP       (1 << 3)
  82
  83 /* modulemode control type (SW or HW) */
  84 #define MODULEMODE_HWCTRL               1
  85 #define MODULEMODE_SWCTRL               2
  86
  87
  88 /**
  89  * struct omap_hwmod_mux_info - hwmod specific mux configuration
  90  * @pads:              array of omap_device_pad entries
  91  * @nr_pads:           number of omap_device_pad entries
  92  *
  93  * Note that this is currently built during init as needed.
  94  */
  95 struct omap_hwmod_mux_info {
  96         int                             nr_pads;
  97         struct omap_device_pad          *pads;
  98         int                             nr_pads_dynamic;
  99         struct omap_device_pad          **pads_dynamic;
 100         int                             *irqs;
 101         bool                            enabled;
 102 };
 103
 104 /**
 105  * struct omap_hwmod_irq_info - MPU IRQs used by the hwmod
 106  * @name: name of the IRQ channel (module local name)
 107  * @irq: IRQ channel ID (should be non-negative except -1 = terminator)
 108  *
 109  * @name should be something short, e.g., "tx" or "rx".  It is for use
 110  * by platform_get_resource_byname().  It is defined locally to the
 111  * hwmod.
 112  */
 113 struct omap_hwmod_irq_info {
 114         const char      *name;
 115         s16             irq;
 116 };
 117
 118 /**
 119  * struct omap_hwmod_dma_info - DMA channels used by the hwmod
 120  * @name: name of the DMA channel (module local name)
 121  * @dma_req: DMA request ID (should be non-negative except -1 = terminator)
 122  *
 123  * @name should be something short, e.g., "tx" or "rx".  It is for use
 124  * by platform_get_resource_byname().  It is defined locally to the
 125  * hwmod.
 126  */
 127 struct omap_hwmod_dma_info {
 128         const char      *name;
 129         s16             dma_req;
 130 };
 131
 132 /**
 133  * struct omap_hwmod_rst_info - IPs reset lines use by hwmod
 134  * @name: name of the reset line (module local name)
 135  * @rst_shift: Offset of the reset bit
 136  * @st_shift: Offset of the reset status bit (OMAP2/3 only)
 137  *
 138  * @name should be something short, e.g., "cpu0" or "rst". It is defined
 139  * locally to the hwmod.
 140  */
 141 struct omap_hwmod_rst_info {
 142         const char      *name;
 143         u8              rst_shift;
 144         u8              st_shift;
 145 };
 146
 147 /**
 148  * struct omap_hwmod_opt_clk - optional clocks used by this hwmod
 149  * @role: "sys", "32k", "tv", etc -- for use in clk_get()
 150  * @clk: opt clock: OMAP clock name
 151  * @_clk: pointer to the struct clk (filled in at runtime)
 152  *
 153  * The module's interface clock and main functional clock should not
 154  * be added as optional clocks.
 155  */
 156 struct omap_hwmod_opt_clk {
 157         const char      *role;
 158         const char      *clk;
 159         struct clk      *_clk;
 160 };
 161
 162
 163 /* omap_hwmod_omap2_firewall.flags bits */
 164 #define OMAP_FIREWALL_L3                (1 << 0)
 165 #define OMAP_FIREWALL_L4                (1 << 1)
 166
 167 /**
 168  * struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data
 169  * @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_*
 170  * @l4_fw_region: L4 firewall region ID
 171  * @l4_prot_group: L4 protection group ID
 172  * @flags: (see omap_hwmod_omap2_firewall.flags macros above)
 173  */
 174 struct omap_hwmod_omap2_firewall {
 175         u8 l3_perm_bit;
 176         u8 l4_fw_region;
 177         u8 l4_prot_group;
 178         u8 flags;
 179 };
 180
 181
 182 /*
 183  * omap_hwmod_addr_space.flags bits
 184  *
 185  * ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init.
 186  * ADDR_TYPE_RT: Address space contains module register target data.
 187  */
 188 #define ADDR_MAP_ON_INIT        (1 << 0)        /* XXX does not belong */
 189 #define ADDR_TYPE_RT            (1 << 1)
 190
 191 /**
 192  * struct omap_hwmod_addr_space - address space handled by the hwmod
 193  * @name: name of the address space
 194  * @pa_start: starting physical address
 195  * @pa_end: ending physical address
 196  * @flags: (see omap_hwmod_addr_space.flags macros above)
 197  *
 198  * Address space doesn't necessarily follow physical interconnect
 199  * structure.  GPMC is one example.
 200  */
 201 struct omap_hwmod_addr_space {
 202         const char *name;
 203         u32 pa_start;
 204         u32 pa_end;
 205         u8 flags;
 206 };
 207
 208
 209 /*
 210  * omap_hwmod_ocp_if.user bits: these indicate the initiators that use this
 211  * interface to interact with the hwmod.  Used to add sleep dependencies
 212  * when the module is enabled or disabled.
 213  */
 214 #define OCP_USER_MPU                    (1 << 0)
 215 #define OCP_USER_SDMA                   (1 << 1)
 216
 217 /* omap_hwmod_ocp_if.flags bits */
 218 #define OCPIF_SWSUP_IDLE                (1 << 0)
 219 #define OCPIF_CAN_BURST                 (1 << 1)
 220
 221 /**
 222  * struct omap_hwmod_ocp_if - OCP interface data
 223  * @master: struct omap_hwmod that initiates OCP transactions on this link
 224  * @slave: struct omap_hwmod that responds to OCP transactions on this link
 225  * @addr: address space associated with this link
 226  * @clk: interface clock: OMAP clock name
 227  * @_clk: pointer to the interface struct clk (filled in at runtime)
 228  * @fw: interface firewall data
 229  * @width: OCP data width
 230  * @user: initiators using this interface (see OCP_USER_* macros above)
 231  * @flags: OCP interface flags (see OCPIF_* macros above)
 232  *
 233  * It may also be useful to add a tag_cnt field for OCP2.x devices.
 234  *
 235  * Parameter names beginning with an underscore are managed internally by
 236  * the omap_hwmod code and should not be set during initialization.
 237  */
 238 struct omap_hwmod_ocp_if {
 239         struct omap_hwmod               *master;
 240         struct omap_hwmod               *slave;
 241         struct omap_hwmod_addr_space    *addr;
 242         const char                      *clk;
 243         struct clk                      *_clk;
 244         union {
 245                 struct omap_hwmod_omap2_firewall omap2;
 246         }                               fw;
 247         u8                              width;
 248         u8                              user;
 249         u8                              flags;
 250 };
 251
 252
 253 /* Macros for use in struct omap_hwmod_sysconfig */
 254
 255 /* Flags for use in omap_hwmod_sysconfig.idlemodes */
 256 #define MASTER_STANDBY_SHIFT    4
 257 #define SLAVE_IDLE_SHIFT        0
 258 #define SIDLE_FORCE             (HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT)
 259 #define SIDLE_NO                (HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT)
 260 #define SIDLE_SMART             (HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT)
 261 #define SIDLE_SMART_WKUP        (HWMOD_IDLEMODE_SMART_WKUP << SLAVE_IDLE_SHIFT)
 262 #define MSTANDBY_FORCE          (HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT)
 263 #define MSTANDBY_NO             (HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT)
 264 #define MSTANDBY_SMART          (HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT)
 265 #define MSTANDBY_SMART_WKUP     (HWMOD_IDLEMODE_SMART_WKUP << MASTER_STANDBY_SHIFT)
 266
 267 /* omap_hwmod_sysconfig.sysc_flags capability flags */
 268 #define SYSC_HAS_AUTOIDLE       (1 << 0)
 269 #define SYSC_HAS_SOFTRESET      (1 << 1)
 270 #define SYSC_HAS_ENAWAKEUP      (1 << 2)
 271 #define SYSC_HAS_EMUFREE        (1 << 3)
 272 #define SYSC_HAS_CLOCKACTIVITY  (1 << 4)
 273 #define SYSC_HAS_SIDLEMODE      (1 << 5)
 274 #define SYSC_HAS_MIDLEMODE      (1 << 6)
 275 #define SYSS_HAS_RESET_STATUS   (1 << 7)
 276 #define SYSC_NO_CACHE           (1 << 8)  /* XXX SW flag, belongs elsewhere */
 277 #define SYSC_HAS_RESET_STATUS   (1 << 9)
 278
 279 /* omap_hwmod_sysconfig.clockact flags */
 280 #define CLOCKACT_TEST_BOTH      0x0
 281 #define CLOCKACT_TEST_MAIN      0x1
 282 #define CLOCKACT_TEST_ICLK      0x2
 283 #define CLOCKACT_TEST_NONE      0x3
 284
 285 /**
 286  * struct omap_hwmod_sysc_fields - hwmod OCP_SYSCONFIG register field offsets.
 287  * @midle_shift: Offset of the midle bit
 288  * @clkact_shift: Offset of the clockactivity bit
 289  * @sidle_shift: Offset of the sidle bit
 290  * @enwkup_shift: Offset of the enawakeup bit
 291  * @srst_shift: Offset of the softreset bit
 292  * @autoidle_shift: Offset of the autoidle bit
 293  */
 294 struct omap_hwmod_sysc_fields {
 295         u8 midle_shift;
 296         u8 clkact_shift;
 297         u8 sidle_shift;
 298         u8 enwkup_shift;
 299         u8 srst_shift;
 300         u8 autoidle_shift;
 301 };
 302
 303 /**
 304  * struct omap_hwmod_class_sysconfig - hwmod class OCP_SYS* data
 305  * @rev_offs: IP block revision register offset (from module base addr)
 306  * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
 307  * @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
 308  * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
 309  * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
 310  * @clockact: the default value of the module CLOCKACTIVITY bits
 311  *
 312  * @clockact describes to the module which clocks are likely to be
 313  * disabled when the PRCM issues its idle request to the module.  Some
 314  * modules have separate clockdomains for the interface clock and main
 315  * functional clock, and can check whether they should acknowledge the
 316  * idle request based on the internal module functionality that has
 317  * been associated with the clocks marked in @clockact.  This field is
 318  * only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below)
 319  *
 320  * @sysc_fields: structure containing the offset positions of various bits in
 321  * SYSCONFIG register. This can be populated using omap_hwmod_sysc_type1 or
 322  * omap_hwmod_sysc_type2 defined in omap_hwmod_common_data.c depending on
 323  * whether the device ip is compliant with the original PRCM protocol
 324  * defined for OMAP2420 or the new PRCM protocol for new OMAP4 IPs.
 325  * If the device follows a different scheme for the sysconfig register ,
 326  * then this field has to be populated with the correct offset structure.
 327  */
 328 struct omap_hwmod_class_sysconfig {
 329         u16 rev_offs;
 330         u16 sysc_offs;
 331         u16 syss_offs;
 332         u16 sysc_flags;
 333         u8 idlemodes;
 334         u8 clockact;
 335         struct omap_hwmod_sysc_fields *sysc_fields;
 336 };
 337
 338 /**
 339  * struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data
 340  * @module_offs: PRCM submodule offset from the start of the PRM/CM
 341  * @prcm_reg_id: PRCM register ID (e.g., 3 for CM_AUTOIDLE3)
 342  * @module_bit: register bit shift for AUTOIDLE, WKST, WKEN, GRPSEL regs
 343  * @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3)
 344  * @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit
 345  * @idlest_stdby_bit: register bit shift for CM_IDLEST master standby bit
 346  *
 347  * @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST,
 348  * WKEN, GRPSEL registers.  In an ideal world, no extra information
 349  * would be needed for IDLEST information, but alas, there are some
 350  * exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit
 351  * are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST)
 352  */
 353 struct omap_hwmod_omap2_prcm {
 354         s16 module_offs;
 355         u8 prcm_reg_id;
 356         u8 module_bit;
 357         u8 idlest_reg_id;
 358         u8 idlest_idle_bit;
 359         u8 idlest_stdby_bit;
 360 };
 361
 362
 363 /**
 364  * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
 365  * @clkctrl_reg: PRCM address of the clock control register
 366  * @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM
 367  * @submodule_wkdep_bit: bit shift of the WKDEP range
 368  */
 369 struct omap_hwmod_omap4_prcm {
 370         u16             clkctrl_offs;
 371         u16             rstctrl_offs;
 372         u16             context_offs;
 373         u8              submodule_wkdep_bit;
 374         u8              modulemode;
 375 };
 376
 377
 378 /*
 379  * omap_hwmod.flags definitions
 380  *
 381  * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
 382  *     of idle, rather than relying on module smart-idle
 383  * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
 384  *     of standby, rather than relying on module smart-standby
 385  * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
 386  *     SDRAM controller, etc. XXX probably belongs outside the main hwmod file
 387  *     XXX Should be HWMOD_SETUP_NO_RESET
 388  * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
 389  *     controller, etc. XXX probably belongs outside the main hwmod file
 390  *     XXX Should be HWMOD_SETUP_NO_IDLE
 391  * HWMOD_NO_OCP_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE)
 392  *     when module is enabled, rather than the default, which is to
 393  *     enable autoidle
 394  * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
 395  * HWMOD_NO_IDLEST: this module does not have idle status - this is the case
 396  *     only for few initiator modules on OMAP2 & 3.
 397  * HWMOD_CONTROL_OPT_CLKS_IN_RESET: Enable all optional clocks during reset.
 398  *     This is needed for devices like DSS that require optional clocks enabled
 399  *     in order to complete the reset. Optional clocks will be disabled
 400  *     again after the reset.
 401  * HWMOD_16BIT_REG: Module has 16bit registers
 402  */
 403 #define HWMOD_SWSUP_SIDLE                       (1 << 0)
 404 #define HWMOD_SWSUP_MSTANDBY                    (1 << 1)
 405 #define HWMOD_INIT_NO_RESET                     (1 << 2)
 406 #define HWMOD_INIT_NO_IDLE                      (1 << 3)
 407 #define HWMOD_NO_OCP_AUTOIDLE                   (1 << 4)
 408 #define HWMOD_SET_DEFAULT_CLOCKACT              (1 << 5)
 409 #define HWMOD_NO_IDLEST                         (1 << 6)
 410 #define HWMOD_CONTROL_OPT_CLKS_IN_RESET         (1 << 7)
 411 #define HWMOD_16BIT_REG                         (1 << 8)
 412
 413 /*
 414  * omap_hwmod._int_flags definitions
 415  * These are for internal use only and are managed by the omap_hwmod code.
 416  *
 417  * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module
 418  * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP
 419  * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached
 420  * _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) -
 421  *     causes the first call to _enable() to only update the pinmux
 422  */
 423 #define _HWMOD_NO_MPU_PORT                      (1 << 0)
 424 #define _HWMOD_WAKEUP_ENABLED                   (1 << 1)
 425 #define _HWMOD_SYSCONFIG_LOADED                 (1 << 2)
 426 #define _HWMOD_SKIP_ENABLE                      (1 << 3)
 427
 428 /*
 429  * omap_hwmod._state definitions
 430  *
 431  * INITIALIZED: reset (optionally), initialized, enabled, disabled
 432  *              (optionally)
 433  *
 434  *
 435  */
 436 #define _HWMOD_STATE_UNKNOWN                    0
 437 #define _HWMOD_STATE_REGISTERED                 1
 438 #define _HWMOD_STATE_CLKS_INITED                2
 439 #define _HWMOD_STATE_INITIALIZED                3
 440 #define _HWMOD_STATE_ENABLED                    4
 441 #define _HWMOD_STATE_IDLE                       5
 442 #define _HWMOD_STATE_DISABLED                   6
 443
 444 /**
 445  * struct omap_hwmod_class - the type of an IP block
 446  * @name: name of the hwmod_class
 447  * @sysc: device SYSCONFIG/SYSSTATUS register data
 448  * @rev: revision of the IP class
 449  * @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown
 450  * @reset: ptr to fn to be executed in place of the standard hwmod reset fn
 451  *
 452  * Represent the class of a OMAP hardware "modules" (e.g. timer,
 453  * smartreflex, gpio, uart...)
 454  *
 455  * @pre_shutdown is a function that will be run immediately before
 456  * hwmod clocks are disabled, etc.  It is intended for use for hwmods
 457  * like the MPU watchdog, which cannot be disabled with the standard
 458  * omap_hwmod_shutdown().  The function should return 0 upon success,
 459  * or some negative error upon failure.  Returning an error will cause
 460  * omap_hwmod_shutdown() to abort the device shutdown and return an
 461  * error.
 462  *
 463  * If @reset is defined, then the function it points to will be
 464  * executed in place of the standard hwmod _reset() code in
 465  * mach-omap2/omap_hwmod.c.  This is needed for IP blocks which have
 466  * unusual reset sequences - usually processor IP blocks like the IVA.
 467  */
 468 struct omap_hwmod_class {
 469         const char                              *name;
 470         struct omap_hwmod_class_sysconfig       *sysc;
 471         u32                                     rev;
 472         int                                     (*pre_shutdown)(struct omap_hwmod *oh);
 473         int                                     (*reset)(struct omap_hwmod *oh);
 474 };
 475
 476 /**
 477  * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks)
 478  * @name: name of the hwmod
 479  * @class: struct omap_hwmod_class * to the class of this hwmod
 480  * @od: struct omap_device currently associated with this hwmod (internal use)
 481  * @mpu_irqs: ptr to an array of MPU IRQs
 482  * @sdma_reqs: ptr to an array of System DMA request IDs
 483  * @prcm: PRCM data pertaining to this hwmod
 484  * @main_clk: main clock: OMAP clock name
 485  * @_clk: pointer to the main struct clk (filled in at runtime)
 486  * @opt_clks: other device clocks that drivers can request (0..*)
 487  * @voltdm: pointer to voltage domain (filled in at runtime)
 488  * @masters: ptr to array of OCP ifs that this hwmod can initiate on
 489  * @slaves: ptr to array of OCP ifs that this hwmod can respond on
 490  * @dev_attr: arbitrary device attributes that can be passed to the driver
 491  * @_sysc_cache: internal-use hwmod flags
 492  * @_mpu_rt_va: cached register target start address (internal use)
 493  * @_mpu_port_index: cached MPU register target slave ID (internal use)
 494  * @opt_clks_cnt: number of @opt_clks
 495  * @master_cnt: number of @master entries
 496  * @slaves_cnt: number of @slave entries
 497  * @response_lat: device OCP response latency (in interface clock cycles)
 498  * @_int_flags: internal-use hwmod flags
 499  * @_state: internal-use hwmod state
 500  * @_postsetup_state: internal-use state to leave the hwmod in after _setup()
 501  * @flags: hwmod flags (documented below)
 502  * @_lock: spinlock serializing operations on this hwmod
 503  * @node: list node for hwmod list (internal use)
 504  *
 505  * @main_clk refers to this module's "main clock," which for our
 506  * purposes is defined as "the functional clock needed for register
 507  * accesses to complete."  Modules may not have a main clock if the
 508  * interface clock also serves as a main clock.
 509  *
 510  * Parameter names beginning with an underscore are managed internally by
 511  * the omap_hwmod code and should not be set during initialization.
 512  */
 513 struct omap_hwmod {
 514         const char                      *name;
 515         struct omap_hwmod_class         *class;
 516         struct omap_device              *od;
 517         struct omap_hwmod_mux_info      *mux;
 518         struct omap_hwmod_irq_info      *mpu_irqs;
 519         struct omap_hwmod_dma_info      *sdma_reqs;
 520         struct omap_hwmod_rst_info      *rst_lines;
 521         union {
 522                 struct omap_hwmod_omap2_prcm omap2;
 523                 struct omap_hwmod_omap4_prcm omap4;
 524         }                               prcm;
 525         const char                      *main_clk;
 526         struct clk                      *_clk;
 527         struct omap_hwmod_opt_clk       *opt_clks;
 528         char                            *clkdm_name;
 529         struct clockdomain              *clkdm;
 530         struct omap_hwmod_ocp_if        **masters; /* connect to *_IA */
 531         struct omap_hwmod_ocp_if        **slaves;  /* connect to *_TA */
 532         void                            *dev_attr;
 533         u32                             _sysc_cache;
 534         void __iomem                    *_mpu_rt_va;
 535         spinlock_t                      _lock;
 536         struct list_head                node;
 537         u16                             flags;
 538         u8                              _mpu_port_index;
 539         u8                              response_lat;
 540         u8                              rst_lines_cnt;
 541         u8                              opt_clks_cnt;
 542         u8                              masters_cnt;
 543         u8                              slaves_cnt;
 544         u8                              hwmods_cnt;
 545         u8                              _int_flags;
 546         u8                              _state;
 547         u8                              _postsetup_state;
 548 };
 549
 550 int omap_hwmod_register(struct omap_hwmod **ohs);
 551 struct omap_hwmod *omap_hwmod_lookup(const char *name);
 552 int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
 553                         void *data);
 554
 555 int __init omap_hwmod_setup_one(const char *name);
 556
 557 int omap_hwmod_enable(struct omap_hwmod *oh);
 558 int _omap_hwmod_enable(struct omap_hwmod *oh);
 559 int omap_hwmod_idle(struct omap_hwmod *oh);
 560 int _omap_hwmod_idle(struct omap_hwmod *oh);
 561 int omap_hwmod_shutdown(struct omap_hwmod *oh);
 562
 563 int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name);
 564 int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name);
 565 int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name);
 566
 567 int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
 568 int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
 569
 570 int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode);
 571 int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle);
 572
 573 int omap_hwmod_reset(struct omap_hwmod *oh);
 574 void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
 575
 576 void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs);
 577 u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs);
 578 int omap_hwmod_softreset(struct omap_hwmod *oh);
 579
 580 int omap_hwmod_count_resources(struct omap_hwmod *oh);
 581 int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
 582
 583 struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
 584 void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh);
 585
 586 int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
 587                                  struct omap_hwmod *init_oh);
 588 int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
 589                                  struct omap_hwmod *init_oh);
 590
 591 int omap_hwmod_set_clockact_both(struct omap_hwmod *oh);
 592 int omap_hwmod_set_clockact_main(struct omap_hwmod *oh);
 593 int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh);
 594 int omap_hwmod_set_clockact_none(struct omap_hwmod *oh);
 595
 596 int omap_hwmod_enable_wakeup(struct omap_hwmod *oh);
 597 int omap_hwmod_disable_wakeup(struct omap_hwmod *oh);
 598
 599 int omap_hwmod_for_each_by_class(const char *classname,
 600                                  int (*fn)(struct omap_hwmod *oh,
 601                                            void *user),
 602                                  void *user);
 603
 604 int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state);
 605 int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
 606
 607 int omap_hwmod_no_setup_reset(struct omap_hwmod *oh);
 608
 609 int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx);
 610
 611 /*
 612  * Chip variant-specific hwmod init routines - XXX should be converted
 613  * to use initcalls once the initial boot ordering is straightened out
 614  */
 615 extern int omap2420_hwmod_init(void);
 616 extern int omap2430_hwmod_init(void);
 617 extern int omap3xxx_hwmod_init(void);
 618 extern int omap44xx_hwmod_init(void);
 619
 620 #endif