arch/arm/vfp/vfphw.S

   1 /*
   2  *  linux/arch/arm/vfp/vfphw.S
   3  *
   4  *  Copyright (C) 2004 ARM Limited.
   5  *  Written by Deep Blue Solutions Limited.
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  *
  11  * This code is called from the kernel's undefined instruction trap.
  12  * r9 holds the return address for successful handling.
  13  * lr holds the return address for unrecognised instructions.
  14  * r10 points at the start of the private FP workspace in the thread structure
  15  * sp points to a struct pt_regs (as defined in include/asm/proc/ptrace.h)
  16  */
  17 #include <linux/init.h>
  18 #include <linux/linkage.h>
  19 #include <asm/thread_info.h>
  20 #include <asm/vfpmacros.h>
  21 #include <linux/kern_levels.h>
  22 #include <asm/assembler.h>
  23 #include <asm/asm-offsets.h>
  24
  25         .macro  DBGSTR, str
  26 #ifdef DEBUG
  27         stmfd   sp!, {r0-r3, ip, lr}
  28         ldr     r0, =1f
  29         bl      printk
  30         ldmfd   sp!, {r0-r3, ip, lr}
  31
  32         .pushsection .rodata, "a"
  33 1:      .ascii  KERN_DEBUG "VFP: \str\n"
  34         .byte   0
  35         .previous
  36 #endif
  37         .endm
  38
  39         .macro  DBGSTR1, str, arg
  40 #ifdef DEBUG
  41         stmfd   sp!, {r0-r3, ip, lr}
  42         mov     r1, \arg
  43         ldr     r0, =1f
  44         bl      printk
  45         ldmfd   sp!, {r0-r3, ip, lr}
  46
  47         .pushsection .rodata, "a"
  48 1:      .ascii  KERN_DEBUG "VFP: \str\n"
  49         .byte   0
  50         .previous
  51 #endif
  52         .endm
  53
  54         .macro  DBGSTR3, str, arg1, arg2, arg3
  55 #ifdef DEBUG
  56         stmfd   sp!, {r0-r3, ip, lr}
  57         mov     r3, \arg3
  58         mov     r2, \arg2
  59         mov     r1, \arg1
  60         ldr     r0, =1f
  61         bl      printk
  62         ldmfd   sp!, {r0-r3, ip, lr}
  63
  64         .pushsection .rodata, "a"
  65 1:      .ascii  KERN_DEBUG "VFP: \str\n"
  66         .byte   0
  67         .previous
  68 #endif
  69         .endm
  70
  71
  72 @ VFP hardware support entry point.
  73 @
  74 @  r0  = instruction opcode (32-bit ARM or two 16-bit Thumb)
  75 @  r2  = PC value to resume execution after successful emulation
  76 @  r9  = normal "successful" return address
  77 @  r10 = vfp_state union
  78 @  r11 = CPU number
  79 @  lr  = unrecognised instruction return address
  80 @  IRQs enabled.
  81 ENTRY(vfp_support_entry)
  82         DBGSTR3 "instr %08x pc %08x state %p", r0, r2, r10
  83
  84         ldr     r3, [sp, #S_PSR]        @ Neither lazy restore nor FP exceptions
  85         and     r3, r3, #MODE_MASK      @ are supported in kernel mode
  86         teq     r3, #USR_MODE
  87         bne     vfp_kmode_exception     @ Returns through lr
  88
  89         VFPFMRX r1, FPEXC               @ Is the VFP enabled?
  90         DBGSTR1 "fpexc %08x", r1
  91         tst     r1, #FPEXC_EN
  92         bne     look_for_VFP_exceptions @ VFP is already enabled
  93
  94         DBGSTR1 "enable %x", r10
  95         ldr     r3, vfp_current_hw_state_address
  96         orr     r1, r1, #FPEXC_EN       @ user FPEXC has the enable bit set
  97         ldr     r4, [r3, r11, lsl #2]   @ vfp_current_hw_state pointer
  98         bic     r5, r1, #FPEXC_EX       @ make sure exceptions are disabled
  99         cmp     r4, r10                 @ this thread owns the hw context?
 100 #ifndef CONFIG_SMP
 101         @ For UP, checking that this thread owns the hw context is
 102         @ sufficient to determine that the hardware state is valid.
 103         beq     vfp_hw_state_valid
 104
 105         @ On UP, we lazily save the VFP context.  As a different
 106         @ thread wants ownership of the VFP hardware, save the old
 107         @ state if there was a previous (valid) owner.
 108
 109         VFPFMXR FPEXC, r5               @ enable VFP, disable any pending
 110                                         @ exceptions, so we can get at the
 111                                         @ rest of it
 112
 113         DBGSTR1 "save old state %p", r4
 114         cmp     r4, #0                  @ if the vfp_current_hw_state is NULL
 115         beq     vfp_reload_hw           @ then the hw state needs reloading
 116         VFPFSTMIA r4, r5                @ save the working registers
 117         VFPFMRX r5, FPSCR               @ current status
 118 #ifndef CONFIG_CPU_FEROCEON
 119         tst     r1, #FPEXC_EX           @ is there additional state to save?
 120         beq     1f
 121         VFPFMRX r6, FPINST              @ FPINST (only if FPEXC.EX is set)
 122         tst     r1, #FPEXC_FP2V         @ is there an FPINST2 to read?
 123         beq     1f
 124         VFPFMRX r8, FPINST2             @ FPINST2 if needed (and present)
 125 1:
 126 #endif
 127         stmia   r4, {r1, r5, r6, r8}    @ save FPEXC, FPSCR, FPINST, FPINST2
 128 vfp_reload_hw:
 129
 130 #else
 131         @ For SMP, if this thread does not own the hw context, then we
 132         @ need to reload it.  No need to save the old state as on SMP,
 133         @ we always save the state when we switch away from a thread.
 134         bne     vfp_reload_hw
 135
 136         @ This thread has ownership of the current hardware context.
 137         @ However, it may have been migrated to another CPU, in which
 138         @ case the saved state is newer than the hardware context.
 139         @ Check this by looking at the CPU number which the state was
 140         @ last loaded onto.
 141         ldr     ip, [r10, #VFP_CPU]
 142         teq     ip, r11
 143         beq     vfp_hw_state_valid
 144
 145 vfp_reload_hw:
 146         @ We're loading this threads state into the VFP hardware. Update
 147         @ the CPU number which contains the most up to date VFP context.
 148         str     r11, [r10, #VFP_CPU]
 149
 150         VFPFMXR FPEXC, r5               @ enable VFP, disable any pending
 151                                         @ exceptions, so we can get at the
 152                                         @ rest of it
 153 #endif
 154
 155         DBGSTR1 "load state %p", r10
 156         str     r10, [r3, r11, lsl #2]  @ update the vfp_current_hw_state pointer
 157                                         @ Load the saved state back into the VFP
 158         VFPFLDMIA r10, r5               @ reload the working registers while
 159                                         @ FPEXC is in a safe state
 160         ldmia   r10, {r1, r5, r6, r8}   @ load FPEXC, FPSCR, FPINST, FPINST2
 161 #ifndef CONFIG_CPU_FEROCEON
 162         tst     r1, #FPEXC_EX           @ is there additional state to restore?
 163         beq     1f
 164         VFPFMXR FPINST, r6              @ restore FPINST (only if FPEXC.EX is set)
 165         tst     r1, #FPEXC_FP2V         @ is there an FPINST2 to write?
 166         beq     1f
 167         VFPFMXR FPINST2, r8             @ FPINST2 if needed (and present)
 168 1:
 169 #endif
 170         VFPFMXR FPSCR, r5               @ restore status
 171
 172 @ The context stored in the VFP hardware is up to date with this thread
 173 vfp_hw_state_valid:
 174         tst     r1, #FPEXC_EX
 175         bne     process_exception       @ might as well handle the pending
 176                                         @ exception before retrying branch
 177                                         @ out before setting an FPEXC that
 178                                         @ stops us reading stuff
 179         VFPFMXR FPEXC, r1               @ Restore FPEXC last
 180         sub     r2, r2, #4              @ Retry current instruction - if Thumb
 181         str     r2, [sp, #S_PC]         @ mode it's two 16-bit instructions,
 182                                         @ else it's one 32-bit instruction, so
 183                                         @ always subtract 4 from the following
 184                                         @ instruction address.
 185         dec_preempt_count_ti r10, r4
 186         mov     pc, r9                  @ we think we have handled things
 187
 188
 189 look_for_VFP_exceptions:
 190         @ Check for synchronous or asynchronous exception
 191         tst     r1, #FPEXC_EX | FPEXC_DEX
 192         bne     process_exception
 193         @ On some implementations of the VFP subarch 1, setting FPSCR.IXE
 194         @ causes all the CDP instructions to be bounced synchronously without
 195         @ setting the FPEXC.EX bit
 196         VFPFMRX r5, FPSCR
 197         tst     r5, #FPSCR_IXE
 198         bne     process_exception
 199
 200         @ Fall into hand on to next handler - appropriate coproc instr
 201         @ not recognised by VFP
 202
 203         DBGSTR  "not VFP"
 204         dec_preempt_count_ti r10, r4
 205         mov     pc, lr
 206
 207 process_exception:
 208         DBGSTR  "bounce"
 209         mov     r2, sp                  @ nothing stacked - regdump is at TOS
 210         mov     lr, r9                  @ setup for a return to the user code.
 211
 212         @ Now call the C code to package up the bounce to the support code
 213         @   r0 holds the trigger instruction
 214         @   r1 holds the FPEXC value
 215         @   r2 pointer to register dump
 216         b       VFP_bounce              @ we have handled this - the support
 217                                         @ code will raise an exception if
 218                                         @ required. If not, the user code will
 219                                         @ retry the faulted instruction
 220 ENDPROC(vfp_support_entry)
 221
 222 ENTRY(vfp_save_state)
 223         @ Save the current VFP state
 224         @ r0 - save location
 225         @ r1 - FPEXC
 226         DBGSTR1 "save VFP state %p", r0
 227         VFPFSTMIA r0, r2                @ save the working registers
 228         VFPFMRX r2, FPSCR               @ current status
 229         tst     r1, #FPEXC_EX           @ is there additional state to save?
 230         beq     1f
 231         VFPFMRX r3, FPINST              @ FPINST (only if FPEXC.EX is set)
 232         tst     r1, #FPEXC_FP2V         @ is there an FPINST2 to read?
 233         beq     1f
 234         VFPFMRX r12, FPINST2            @ FPINST2 if needed (and present)
 235 1:
 236         stmia   r0, {r1, r2, r3, r12}   @ save FPEXC, FPSCR, FPINST, FPINST2
 237         mov     pc, lr
 238 ENDPROC(vfp_save_state)
 239
 240         .align
 241 vfp_current_hw_state_address:
 242         .word   vfp_current_hw_state
 243
 244         .macro  tbl_branch, base, tmp, shift
 245 #ifdef CONFIG_THUMB2_KERNEL
 246         adr     \tmp, 1f
 247         add     \tmp, \tmp, \base, lsl \shift
 248         mov     pc, \tmp
 249 #else
 250         add     pc, pc, \base, lsl \shift
 251         mov     r0, r0
 252 #endif
 253 1:
 254         .endm
 255
 256 ENTRY(vfp_get_float)
 257         tbl_branch r0, r3, #3
 258         .irp    dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
 259 1:      mrc     p10, 0, r0, c\dr, c0, 0 @ fmrs  r0, s0
 260         mov     pc, lr
 261         .org    1b + 8
 262 1:      mrc     p10, 0, r0, c\dr, c0, 4 @ fmrs  r0, s1
 263         mov     pc, lr
 264         .org    1b + 8
 265         .endr
 266 ENDPROC(vfp_get_float)
 267
 268 ENTRY(vfp_put_float)
 269         tbl_branch r1, r3, #3
 270         .irp    dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
 271 1:      mcr     p10, 0, r0, c\dr, c0, 0 @ fmsr  r0, s0
 272         mov     pc, lr
 273         .org    1b + 8
 274 1:      mcr     p10, 0, r0, c\dr, c0, 4 @ fmsr  r0, s1
 275         mov     pc, lr
 276         .org    1b + 8
 277         .endr
 278 ENDPROC(vfp_put_float)
 279
 280 ENTRY(vfp_get_double)
 281         tbl_branch r0, r3, #3
 282         .irp    dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
 283 1:      fmrrd   r0, r1, d\dr
 284         mov     pc, lr
 285         .org    1b + 8
 286         .endr
 287 #ifdef CONFIG_VFPv3
 288         @ d16 - d31 registers
 289         .irp    dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
 290 1:      mrrc    p11, 3, r0, r1, c\dr    @ fmrrd r0, r1, d\dr
 291         mov     pc, lr
 292         .org    1b + 8
 293         .endr
 294 #endif
 295
 296         @ virtual register 16 (or 32 if VFPv3) for compare with zero
 297         mov     r0, #0
 298         mov     r1, #0
 299         mov     pc, lr
 300 ENDPROC(vfp_get_double)
 301
 302 ENTRY(vfp_put_double)
 303         tbl_branch r2, r3, #3
 304         .irp    dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
 305 1:      fmdrr   d\dr, r0, r1
 306         mov     pc, lr
 307         .org    1b + 8
 308         .endr
 309 #ifdef CONFIG_VFPv3
 310         @ d16 - d31 registers
 311         .irp    dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
 312 1:      mcrr    p11, 3, r0, r1, c\dr    @ fmdrr r0, r1, d\dr
 313         mov     pc, lr
 314         .org    1b + 8
 315         .endr
 316 #endif
 317 ENDPROC(vfp_put_double)