arch/arm64/boot/dts/apm-storm.dtsi

   1 /*
   2  * dts file for AppliedMicro (APM) X-Gene Storm SOC
   3  *
   4  * Copyright (C) 2013, Applied Micro Circuits Corporation
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License as
   8  * published by the Free Software Foundation; either version 2 of
   9  * the License, or (at your option) any later version.
  10  */
  11
  12 / {
  13         compatible = "apm,xgene-storm";
  14         interrupt-parent = <&gic>;
  15         #address-cells = <2>;
  16         #size-cells = <2>;
  17
  18         cpus {
  19                 #address-cells = <2>;
  20                 #size-cells = <0>;
  21
  22                 cpu@000 {
  23                         device_type = "cpu";
  24                         compatible = "apm,potenza", "arm,armv8";
  25                         reg = <0x0 0x000>;
  26                         enable-method = "spin-table";
  27                         cpu-release-addr = <0x1 0x0000fff8>;
  28                 };
  29                 cpu@001 {
  30                         device_type = "cpu";
  31                         compatible = "apm,potenza", "arm,armv8";
  32                         reg = <0x0 0x001>;
  33                         enable-method = "spin-table";
  34                         cpu-release-addr = <0x1 0x0000fff8>;
  35                 };
  36                 cpu@100 {
  37                         device_type = "cpu";
  38                         compatible = "apm,potenza", "arm,armv8";
  39                         reg = <0x0 0x100>;
  40                         enable-method = "spin-table";
  41                         cpu-release-addr = <0x1 0x0000fff8>;
  42                 };
  43                 cpu@101 {
  44                         device_type = "cpu";
  45                         compatible = "apm,potenza", "arm,armv8";
  46                         reg = <0x0 0x101>;
  47                         enable-method = "spin-table";
  48                         cpu-release-addr = <0x1 0x0000fff8>;
  49                 };
  50                 cpu@200 {
  51                         device_type = "cpu";
  52                         compatible = "apm,potenza", "arm,armv8";
  53                         reg = <0x0 0x200>;
  54                         enable-method = "spin-table";
  55                         cpu-release-addr = <0x1 0x0000fff8>;
  56                 };
  57                 cpu@201 {
  58                         device_type = "cpu";
  59                         compatible = "apm,potenza", "arm,armv8";
  60                         reg = <0x0 0x201>;
  61                         enable-method = "spin-table";
  62                         cpu-release-addr = <0x1 0x0000fff8>;
  63                 };
  64                 cpu@300 {
  65                         device_type = "cpu";
  66                         compatible = "apm,potenza", "arm,armv8";
  67                         reg = <0x0 0x300>;
  68                         enable-method = "spin-table";
  69                         cpu-release-addr = <0x1 0x0000fff8>;
  70                 };
  71                 cpu@301 {
  72                         device_type = "cpu";
  73                         compatible = "apm,potenza", "arm,armv8";
  74                         reg = <0x0 0x301>;
  75                         enable-method = "spin-table";
  76                         cpu-release-addr = <0x1 0x0000fff8>;
  77                 };
  78         };
  79
  80         gic: interrupt-controller@78010000 {
  81                 compatible = "arm,cortex-a15-gic";
  82                 #interrupt-cells = <3>;
  83                 interrupt-controller;
  84                 reg = <0x0 0x78010000 0x0 0x1000>,      /* GIC Dist */
  85                       <0x0 0x78020000 0x0 0x1000>,      /* GIC CPU */
  86                       <0x0 0x78040000 0x0 0x2000>,      /* GIC VCPU Control */
  87                       <0x0 0x78060000 0x0 0x2000>;      /* GIC VCPU */
  88                 interrupts = <1 9 0xf04>;       /* GIC Maintenence IRQ */
  89         };
  90
  91         timer {
  92                 compatible = "arm,armv8-timer";
  93                 interrupts = <1 0 0xff01>,      /* Secure Phys IRQ */
  94                              <1 13 0xff01>,     /* Non-secure Phys IRQ */
  95                              <1 14 0xff01>,     /* Virt IRQ */
  96                              <1 15 0xff01>;     /* Hyp IRQ */
  97                 clock-frequency = <50000000>;
  98         };
  99
 100         soc {
 101                 compatible = "simple-bus";
 102                 #address-cells = <2>;
 103                 #size-cells = <2>;
 104                 ranges;
 105
 106                 clocks {
 107                         #address-cells = <2>;
 108                         #size-cells = <2>;
 109                         ranges;
 110                         refclk: refclk {
 111                                 compatible = "fixed-clock";
 112                                 #clock-cells = <1>;
 113                                 clock-frequency = <100000000>;
 114                                 clock-output-names = "refclk";
 115                         };
 116
 117                         pcppll: pcppll@17000100 {
 118                                 compatible = "apm,xgene-pcppll-clock";
 119                                 #clock-cells = <1>;
 120                                 clocks = <&refclk 0>;
 121                                 clock-names = "pcppll";
 122                                 reg = <0x0 0x17000100 0x0 0x1000>;
 123                                 clock-output-names = "pcppll";
 124                                 type = <0>;
 125                         };
 126
 127                         socpll: socpll@17000120 {
 128                                 compatible = "apm,xgene-socpll-clock";
 129                                 #clock-cells = <1>;
 130                                 clocks = <&refclk 0>;
 131                                 clock-names = "socpll";
 132                                 reg = <0x0 0x17000120 0x0 0x1000>;
 133                                 clock-output-names = "socpll";
 134                                 type = <1>;
 135                         };
 136
 137                         socplldiv2: socplldiv2  {
 138                                 compatible = "fixed-factor-clock";
 139                                 #clock-cells = <1>;
 140                                 clocks = <&socpll 0>;
 141                                 clock-names = "socplldiv2";
 142                                 clock-mult = <1>;
 143                                 clock-div = <2>;
 144                                 clock-output-names = "socplldiv2";
 145                         };
 146
 147                         qmlclk: qmlclk {
 148                                 compatible = "apm,xgene-device-clock";
 149                                 #clock-cells = <1>;
 150                                 clocks = <&socplldiv2 0>;
 151                                 clock-names = "qmlclk";
 152                                 reg = <0x0 0x1703C000 0x0 0x1000>;
 153                                 reg-names = "csr-reg";
 154                                 clock-output-names = "qmlclk";
 155                         };
 156
 157                         ethclk: ethclk {
 158                                 compatible = "apm,xgene-device-clock";
 159                                 #clock-cells = <1>;
 160                                 clocks = <&socplldiv2 0>;
 161                                 clock-names = "ethclk";
 162                                 reg = <0x0 0x17000000 0x0 0x1000>;
 163                                 reg-names = "div-reg";
 164                                 divider-offset = <0x238>;
 165                                 divider-width = <0x9>;
 166                                 divider-shift = <0x0>;
 167                                 clock-output-names = "ethclk";
 168                         };
 169
 170                         eth8clk: eth8clk {
 171                                 compatible = "apm,xgene-device-clock";
 172                                 #clock-cells = <1>;
 173                                 clocks = <&ethclk 0>;
 174                                 clock-names = "eth8clk";
 175                                 reg = <0x0 0x1702C000 0x0 0x1000>;
 176                                 reg-names = "csr-reg";
 177                                 clock-output-names = "eth8clk";
 178                         };
 179
 180                         sataphy1clk: sataphy1clk@1f21c000 {
 181                                 compatible = "apm,xgene-device-clock";
 182                                 #clock-cells = <1>;
 183                                 clocks = <&socplldiv2 0>;
 184                                 reg = <0x0 0x1f21c000 0x0 0x1000>;
 185                                 reg-names = "csr-reg";
 186                                 clock-output-names = "sataphy1clk";
 187                                 status = "disabled";
 188                                 csr-offset = <0x4>;
 189                                 csr-mask = <0x00>;
 190                                 enable-offset = <0x0>;
 191                                 enable-mask = <0x06>;
 192                         };
 193
 194                         sataphy2clk: sataphy1clk@1f22c000 {
 195                                 compatible = "apm,xgene-device-clock";
 196                                 #clock-cells = <1>;
 197                                 clocks = <&socplldiv2 0>;
 198                                 reg = <0x0 0x1f22c000 0x0 0x1000>;
 199                                 reg-names = "csr-reg";
 200                                 clock-output-names = "sataphy2clk";
 201                                 status = "ok";
 202                                 csr-offset = <0x4>;
 203                                 csr-mask = <0x3a>;
 204                                 enable-offset = <0x0>;
 205                                 enable-mask = <0x06>;
 206                         };
 207
 208                         sataphy3clk: sataphy1clk@1f23c000 {
 209                                 compatible = "apm,xgene-device-clock";
 210                                 #clock-cells = <1>;
 211                                 clocks = <&socplldiv2 0>;
 212                                 reg = <0x0 0x1f23c000 0x0 0x1000>;
 213                                 reg-names = "csr-reg";
 214                                 clock-output-names = "sataphy3clk";
 215                                 status = "ok";
 216                                 csr-offset = <0x4>;
 217                                 csr-mask = <0x3a>;
 218                                 enable-offset = <0x0>;
 219                                 enable-mask = <0x06>;
 220                         };
 221
 222                         sata01clk: sata01clk@1f21c000 {
 223                                 compatible = "apm,xgene-device-clock";
 224                                 #clock-cells = <1>;
 225                                 clocks = <&socplldiv2 0>;
 226                                 reg = <0x0 0x1f21c000 0x0 0x1000>;
 227                                 reg-names = "csr-reg";
 228                                 clock-output-names = "sata01clk";
 229                                 csr-offset = <0x4>;
 230                                 csr-mask = <0x05>;
 231                                 enable-offset = <0x0>;
 232                                 enable-mask = <0x39>;
 233                         };
 234
 235                         sata23clk: sata23clk@1f22c000 {
 236                                 compatible = "apm,xgene-device-clock";
 237                                 #clock-cells = <1>;
 238                                 clocks = <&socplldiv2 0>;
 239                                 reg = <0x0 0x1f22c000 0x0 0x1000>;
 240                                 reg-names = "csr-reg";
 241                                 clock-output-names = "sata23clk";
 242                                 csr-offset = <0x4>;
 243                                 csr-mask = <0x05>;
 244                                 enable-offset = <0x0>;
 245                                 enable-mask = <0x39>;
 246                         };
 247
 248                         sata45clk: sata45clk@1f23c000 {
 249                                 compatible = "apm,xgene-device-clock";
 250                                 #clock-cells = <1>;
 251                                 clocks = <&socplldiv2 0>;
 252                                 reg = <0x0 0x1f23c000 0x0 0x1000>;
 253                                 reg-names = "csr-reg";
 254                                 clock-output-names = "sata45clk";
 255                                 csr-offset = <0x4>;
 256                                 csr-mask = <0x05>;
 257                                 enable-offset = <0x0>;
 258                                 enable-mask = <0x39>;
 259                         };
 260
 261                         rtcclk: rtcclk@17000000 {
 262                                 compatible = "apm,xgene-device-clock";
 263                                 #clock-cells = <1>;
 264                                 clocks = <&socplldiv2 0>;
 265                                 reg = <0x0 0x17000000 0x0 0x2000>;
 266                                 reg-names = "csr-reg";
 267                                 csr-offset = <0xc>;
 268                                 csr-mask = <0x2>;
 269                                 enable-offset = <0x10>;
 270                                 enable-mask = <0x2>;
 271                                 clock-output-names = "rtcclk";
 272                         };
 273                 };
 274
 275                 serial0: serial@1c020000 {
 276                         status = "disabled";
 277                         device_type = "serial";
 278                         compatible = "ns16550a";
 279                         reg = <0 0x1c020000 0x0 0x1000>;
 280                         reg-shift = <2>;
 281                         clock-frequency = <10000000>; /* Updated by bootloader */
 282                         interrupt-parent = <&gic>;
 283                         interrupts = <0x0 0x4c 0x4>;
 284                 };
 285
 286                 serial1: serial@1c021000 {
 287                         status = "disabled";
 288                         device_type = "serial";
 289                         compatible = "ns16550a";
 290                         reg = <0 0x1c021000 0x0 0x1000>;
 291                         reg-shift = <2>;
 292                         clock-frequency = <10000000>; /* Updated by bootloader */
 293                         interrupt-parent = <&gic>;
 294                         interrupts = <0x0 0x4d 0x4>;
 295                 };
 296
 297                 serial2: serial@1c022000 {
 298                         status = "disabled";
 299                         device_type = "serial";
 300                         compatible = "ns16550a";
 301                         reg = <0 0x1c022000 0x0 0x1000>;
 302                         reg-shift = <2>;
 303                         clock-frequency = <10000000>; /* Updated by bootloader */
 304                         interrupt-parent = <&gic>;
 305                         interrupts = <0x0 0x4e 0x4>;
 306                 };
 307
 308                 serial3: serial@1c023000 {
 309                         status = "disabled";
 310                         device_type = "serial";
 311                         compatible = "ns16550a";
 312                         reg = <0 0x1c023000 0x0 0x1000>;
 313                         reg-shift = <2>;
 314                         clock-frequency = <10000000>; /* Updated by bootloader */
 315                         interrupt-parent = <&gic>;
 316                         interrupts = <0x0 0x4f 0x4>;
 317                 };
 318
 319                 phy1: phy@1f21a000 {
 320                         compatible = "apm,xgene-phy";
 321                         reg = <0x0 0x1f21a000 0x0 0x100>;
 322                         #phy-cells = <1>;
 323                         clocks = <&sataphy1clk 0>;
 324                         status = "disabled";
 325                         apm,tx-boost-gain = <30 30 30 30 30 30>;
 326                         apm,tx-eye-tuning = <2 10 10 2 10 10>;
 327                 };
 328
 329                 phy2: phy@1f22a000 {
 330                         compatible = "apm,xgene-phy";
 331                         reg = <0x0 0x1f22a000 0x0 0x100>;
 332                         #phy-cells = <1>;
 333                         clocks = <&sataphy2clk 0>;
 334                         status = "ok";
 335                         apm,tx-boost-gain = <30 30 30 30 30 30>;
 336                         apm,tx-eye-tuning = <1 10 10 2 10 10>;
 337                 };
 338
 339                 phy3: phy@1f23a000 {
 340                         compatible = "apm,xgene-phy";
 341                         reg = <0x0 0x1f23a000 0x0 0x100>;
 342                         #phy-cells = <1>;
 343                         clocks = <&sataphy3clk 0>;
 344                         status = "ok";
 345                         apm,tx-boost-gain = <31 31 31 31 31 31>;
 346                         apm,tx-eye-tuning = <2 10 10 2 10 10>;
 347                 };
 348
 349                 sata1: sata@1a000000 {
 350                         compatible = "apm,xgene-ahci";
 351                         reg = <0x0 0x1a000000 0x0 0x1000>,
 352                               <0x0 0x1f210000 0x0 0x1000>,
 353                               <0x0 0x1f21d000 0x0 0x1000>,
 354                               <0x0 0x1f21e000 0x0 0x1000>,
 355                               <0x0 0x1f217000 0x0 0x1000>;
 356                         interrupts = <0x0 0x86 0x4>;
 357                         dma-coherent;
 358                         status = "disabled";
 359                         clocks = <&sata01clk 0>;
 360                         phys = <&phy1 0>;
 361                         phy-names = "sata-phy";
 362                 };
 363
 364                 sata2: sata@1a400000 {
 365                         compatible = "apm,xgene-ahci";
 366                         reg = <0x0 0x1a400000 0x0 0x1000>,
 367                               <0x0 0x1f220000 0x0 0x1000>,
 368                               <0x0 0x1f22d000 0x0 0x1000>,
 369                               <0x0 0x1f22e000 0x0 0x1000>,
 370                               <0x0 0x1f227000 0x0 0x1000>;
 371                         interrupts = <0x0 0x87 0x4>;
 372                         dma-coherent;
 373                         status = "ok";
 374                         clocks = <&sata23clk 0>;
 375                         phys = <&phy2 0>;
 376                         phy-names = "sata-phy";
 377                 };
 378
 379                 sata3: sata@1a800000 {
 380                         compatible = "apm,xgene-ahci";
 381                         reg = <0x0 0x1a800000 0x0 0x1000>,
 382                               <0x0 0x1f230000 0x0 0x1000>,
 383                               <0x0 0x1f23d000 0x0 0x1000>,
 384                               <0x0 0x1f23e000 0x0 0x1000>;
 385                         interrupts = <0x0 0x88 0x4>;
 386                         dma-coherent;
 387                         status = "ok";
 388                         clocks = <&sata45clk 0>;
 389                         phys = <&phy3 0>;
 390                         phy-names = "sata-phy";
 391                 };
 392
 393                 rtc: rtc@10510000 {
 394                         compatible = "apm,xgene-rtc";
 395                         reg = <0x0 0x10510000 0x0 0x400>;
 396                         interrupts = <0x0 0x46 0x4>;
 397                         #clock-cells = <1>;
 398                         clocks = <&rtcclk 0>;
 399                 };
 400         };
 401 };