arch/blackfin/mach-bf518/Kconfig

   1 config BF51x
   2         def_bool y
   3         depends on (BF512 || BF514 || BF516 || BF518)
   4
   5 if (BF51x)
   6
   7 source "arch/blackfin/mach-bf518/boards/Kconfig"
   8
   9 menu "BF518 Specific Configuration"
  10
  11 comment "Alternative Multiplexing Scheme"
  12
  13 choice
  14         prompt "PWM Channel Pins"
  15         default BF518_PWM_ALL_PORTF
  16         help
  17           Select pins used for the PWM channels:
  18             PWM_AH PWM_AL PWM_BH PWM_BL PWM_CH PWM_CL
  19
  20           See the Hardware Reference Manual for more details.
  21
  22 config BF518_PWM_ALL_PORTF
  23         bool "PF1 - PF6"
  24         help
  25           PF{1,2,3,4,5,6} <-> PWM_{AH,AL,BH,BL,CH,CL}
  26
  27 config BF518_PWM_PORTF_PORTG
  28         bool "PF11 - PF14 / PG1 - PG2"
  29         help
  30           PF{11,12,13,14} <-> PWM_{AH,AL,BH,BL}
  31           PG{1,2} <-> PWM_{CH,CL}
  32
  33 endchoice
  34
  35 choice
  36         prompt "PWM Sync Pin"
  37         default BF518_PWM_SYNC_PF7
  38         help
  39           Select the pin used for PWM_SYNC.
  40
  41           See the Hardware Reference Manual for more details.
  42
  43 config BF518_PWM_SYNC_PF7
  44         bool "PF7"
  45 config BF518_PWM_SYNC_PF15
  46         bool "PF15"
  47 endchoice
  48
  49 choice
  50         prompt "PWM Trip B Pin"
  51         default BF518_PWM_TRIPB_PG10
  52         help
  53           Select the pin used for PWM_TRIPB.
  54
  55           See the Hardware Reference Manual for more details.
  56
  57 config BF518_PWM_TRIPB_PG10
  58         bool "PG10"
  59 config BF518_PWM_TRIPB_PG14
  60         bool "PG14"
  61 endchoice
  62
  63 choice
  64         prompt "PPI / Timer Pins"
  65         default BF518_PPI_TMR_PG5
  66         help
  67           Select pins used for PPI/Timer:
  68             PPICLK PPIFS1 PPIFS2
  69             TMRCLK TMR0 TMR1
  70
  71           See the Hardware Reference Manual for more details.
  72
  73 config BF518_PPI_TMR_PG5
  74         bool "PG5 - PG7"
  75         help
  76           PG{5,6,7} <-> {PPICLK/TMRCLK,TMR0/PPIFS1,TMR1/PPIFS2}
  77
  78 config BF518_PPI_TMR_PG12
  79         bool "PG12 - PG14"
  80         help
  81           PG{12,13,14} <-> {PPICLK/TMRCLK,TMR0/PPIFS1,TMR1/PPIFS2}
  82
  83 endchoice
  84
  85 comment "Hysteresis/Schmitt Trigger Control"
  86 config BFIN_HYSTERESIS_CONTROL
  87         bool "Enable Hysteresis Control"
  88         help
  89           The ADSP-BF51x allows to control input hysteresis for Port F,
  90           Port G and Port H and other processor signal inputs.
  91           The Schmitt trigger enables can be set only for pin groups.
  92           Saying Y will overwrite the default reset or boot loader
  93           initialization.
  94
  95 menu "PORT F"
  96         depends on BFIN_HYSTERESIS_CONTROL
  97 config GPIO_HYST_PORTF_0_7
  98         bool "Enable Hysteresis on PORTF {0...7}"
  99 config GPIO_HYST_PORTF_8_9
 100         bool "Enable Hysteresis on PORTF {8, 9}"
 101 config GPIO_HYST_PORTF_10
 102         bool "Enable Hysteresis on PORTF 10"
 103 config GPIO_HYST_PORTF_11
 104         bool "Enable Hysteresis on PORTF 11"
 105 config GPIO_HYST_PORTF_12_13
 106         bool "Enable Hysteresis on PORTF {12, 13}"
 107 config GPIO_HYST_PORTF_14_15
 108         bool "Enable Hysteresis on PORTF {14, 15}"
 109 endmenu
 110
 111 menu "PORT G"
 112         depends on BFIN_HYSTERESIS_CONTROL
 113 config GPIO_HYST_PORTG_0
 114         bool "Enable Hysteresis on PORTG 0"
 115 config GPIO_HYST_PORTG_1_4
 116         bool "Enable Hysteresis on PORTG {1...4}"
 117 config GPIO_HYST_PORTG_5_6
 118         bool "Enable Hysteresis on PORTG {5, 6}"
 119 config GPIO_HYST_PORTG_7_8
 120         bool "Enable Hysteresis on PORTG {7, 8}"
 121 config GPIO_HYST_PORTG_9
 122         bool "Enable Hysteresis on PORTG 9"
 123 config GPIO_HYST_PORTG_10
 124         bool "Enable Hysteresis on PORTG 10"
 125 config GPIO_HYST_PORTG_11_13
 126         bool "Enable Hysteresis on PORTG {11...13}"
 127 config GPIO_HYST_PORTG_14_15
 128         bool "Enable Hysteresis on PORTG {14, 15}"
 129 endmenu
 130
 131 menu "PORT H"
 132         depends on BFIN_HYSTERESIS_CONTROL
 133 config GPIO_HYST_PORTH_0_7
 134         bool "Enable Hysteresis on PORTH {0...7}"
 135
 136 endmenu
 137
 138 menu "None-GPIO"
 139         depends on BFIN_HYSTERESIS_CONTROL
 140 config NONEGPIO_HYST_NMI_RST_BMODE
 141         bool "Enable Hysteresis on {NMI, RESET, BMODE}"
 142 config NONEGPIO_HYST_JTAG
 143         bool "Enable Hysteresis on JTAG"
 144 endmenu
 145
 146 comment "Interrupt Priority Assignment"
 147 menu "Priority"
 148
 149 config IRQ_PLL_WAKEUP
 150         int "IRQ_PLL_WAKEUP"
 151         default 7
 152 config IRQ_DMA0_ERROR
 153         int "IRQ_DMA0_ERROR"
 154         default 7
 155 config IRQ_DMAR0_BLK
 156         int "IRQ_DMAR0_BLK"
 157         default 7
 158 config IRQ_DMAR1_BLK
 159         int "IRQ_DMAR1_BLK"
 160         default 7
 161 config IRQ_DMAR0_OVR
 162         int "IRQ_DMAR0_OVR"
 163         default 7
 164 config IRQ_DMAR1_OVR
 165         int "IRQ_DMAR1_OVR"
 166         default 7
 167 config IRQ_PPI_ERROR
 168         int "IRQ_PPI_ERROR"
 169         default 7
 170 config IRQ_MAC_ERROR
 171         int "IRQ_MAC_ERROR"
 172         default 7
 173 config IRQ_SPORT0_ERROR
 174         int "IRQ_SPORT0_ERROR"
 175         default 7
 176 config IRQ_SPORT1_ERROR
 177         int "IRQ_SPORT1_ERROR"
 178         default 7
 179 config IRQ_PTP_ERROR
 180         int "IRQ_PTP_ERROR"
 181         default 7
 182 config IRQ_UART0_ERROR
 183         int "IRQ_UART0_ERROR"
 184         default 7
 185 config IRQ_UART1_ERROR
 186         int "IRQ_UART1_ERROR"
 187         default 7
 188 config IRQ_RTC
 189         int "IRQ_RTC"
 190         default 8
 191 config IRQ_PPI
 192         int "IRQ_PPI"
 193         default 8
 194 config IRQ_SPORT0_RX
 195         int "IRQ_SPORT0_RX"
 196         default 9
 197 config IRQ_SPORT0_TX
 198         int "IRQ_SPORT0_TX"
 199         default 9
 200 config IRQ_SPORT1_RX
 201         int "IRQ_SPORT1_RX"
 202         default 9
 203 config IRQ_SPORT1_TX
 204         int "IRQ_SPORT1_TX"
 205         default 9
 206 config IRQ_TWI
 207         int "IRQ_TWI"
 208         default 10
 209 config IRQ_SPI0
 210         int "IRQ_SPI"
 211         default 10
 212 config IRQ_UART0_RX
 213         int "IRQ_UART0_RX"
 214         default 10
 215 config IRQ_UART0_TX
 216         int "IRQ_UART0_TX"
 217         default 10
 218 config IRQ_UART1_RX
 219         int "IRQ_UART1_RX"
 220         default 10
 221 config IRQ_UART1_TX
 222         int "IRQ_UART1_TX"
 223         default 10
 224 config IRQ_OPTSEC
 225         int "IRQ_OPTSEC"
 226         default 11
 227 config IRQ_CNT
 228         int "IRQ_CNT"
 229         default 11
 230 config IRQ_MAC_RX
 231         int "IRQ_MAC_RX"
 232         default 11
 233 config IRQ_PORTH_INTA
 234         int "IRQ_PORTH_INTA"
 235         default 11
 236 config IRQ_MAC_TX
 237         int "IRQ_MAC_TX/NFC"
 238         default 11
 239 config IRQ_PORTH_INTB
 240         int "IRQ_PORTH_INTB"
 241         default 11
 242 config IRQ_TIMER0
 243         int "IRQ_TIMER0"
 244         default 7 if TICKSOURCE_GPTMR0
 245         default 8
 246 config IRQ_TIMER1
 247         int "IRQ_TIMER1"
 248         default 12
 249 config IRQ_TIMER2
 250         int "IRQ_TIMER2"
 251         default 12
 252 config IRQ_TIMER3
 253         int "IRQ_TIMER3"
 254         default 12
 255 config IRQ_TIMER4
 256         int "IRQ_TIMER4"
 257         default 12
 258 config IRQ_TIMER5
 259         int "IRQ_TIMER5"
 260         default 12
 261 config IRQ_TIMER6
 262         int "IRQ_TIMER6"
 263         default 12
 264 config IRQ_TIMER7
 265         int "IRQ_TIMER7"
 266         default 12
 267 config IRQ_PORTG_INTA
 268         int "IRQ_PORTG_INTA"
 269         default 12
 270 config IRQ_PORTG_INTB
 271         int "IRQ_PORTG_INTB"
 272         default 12
 273 config IRQ_MEM_DMA0
 274         int "IRQ_MEM_DMA0"
 275         default 13
 276 config IRQ_MEM_DMA1
 277         int "IRQ_MEM_DMA1"
 278         default 13
 279 config IRQ_WATCH
 280         int "IRQ_WATCH"
 281         default 13
 282 config IRQ_PORTF_INTA
 283         int "IRQ_PORTF_INTA"
 284         default 13
 285 config IRQ_PORTF_INTB
 286         int "IRQ_PORTF_INTB"
 287         default 13
 288 config IRQ_SPI0_ERROR
 289         int "IRQ_SPI0_ERROR"
 290         default 7
 291 config IRQ_SPI1_ERROR
 292         int "IRQ_SPI1_ERROR"
 293         default 7
 294 config IRQ_RSI_INT0
 295         int "IRQ_RSI_INT0"
 296         default 7
 297 config IRQ_RSI_INT1
 298         int "IRQ_RSI_INT1"
 299         default 7
 300 config IRQ_PWM_TRIP
 301         int "IRQ_PWM_TRIP"
 302         default 10
 303 config IRQ_PWM_SYNC
 304         int "IRQ_PWM_SYNC"
 305         default 10
 306 config IRQ_PTP_STAT
 307         int "IRQ_PTP_STAT"
 308         default 10
 309
 310         help
 311           Enter the priority numbers between 7-13 ONLY.  Others are Reserved.
 312           This applies to all the above.  It is not recommended to assign the
 313           highest priority number 7 to UART or any other device.
 314
 315 endmenu
 316
 317 endmenu
 318
 319 endif