arch/blackfin/mach-bf527/Kconfig

   1 config BF52x
   2         def_bool y
   3         depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527)
   4
   5 if (BF52x)
   6
   7 source "arch/blackfin/mach-bf527/boards/Kconfig"
   8
   9 menu "BF527 Specific Configuration"
  10
  11 comment "Alternative Multiplexing Scheme"
  12
  13 choice
  14         prompt "SPORT0"
  15         default BF527_SPORT0_PORTG
  16         help
  17           Select PORT used for SPORT0. See Hardware Reference Manual
  18
  19 config BF527_SPORT0_PORTF
  20         bool "PORT F"
  21         help
  22           PORT F
  23
  24 config BF527_SPORT0_PORTG
  25         bool "PORT G"
  26         help
  27           PORT G
  28 endchoice
  29
  30 choice
  31         prompt "SPORT0 TSCLK Location"
  32         depends on BF527_SPORT0_PORTG
  33         default BF527_SPORT0_TSCLK_PG10
  34         help
  35           Select PIN used for SPORT0_TSCLK. See Hardware Reference Manual
  36
  37 config BF527_SPORT0_TSCLK_PG10
  38         bool "PORT PG10"
  39         help
  40           PORT PG10
  41
  42 config BF527_SPORT0_TSCLK_PG14
  43         bool "PORT PG14"
  44         help
  45           PORT PG14
  46 endchoice
  47
  48 choice
  49         prompt "UART1"
  50         default BF527_UART1_PORTF
  51         help
  52           Select PORT used for UART1. See Hardware Reference Manual
  53
  54 config BF527_UART1_PORTF
  55         bool "PORT F"
  56         help
  57           PORT F
  58
  59 config BF527_UART1_PORTG
  60         bool "PORT G"
  61         help
  62           PORT G
  63 endchoice
  64
  65 choice
  66         prompt "NAND (NFC) Data"
  67         default BF527_NAND_D_PORTH
  68         help
  69           Select PORT used for NAND Data Bus. See Hardware Reference Manual
  70
  71 config BF527_NAND_D_PORTF
  72         bool "PORT F"
  73         help
  74           PORT F
  75
  76 config BF527_NAND_D_PORTH
  77         bool "PORT H"
  78         help
  79           PORT H
  80 endchoice
  81
  82 comment "Hysteresis/Schmitt Trigger Control"
  83 config BFIN_HYSTERESIS_CONTROL
  84         bool "Enable Hysteresis Control"
  85         help
  86           The ADSP-BF52x allows to control input hysteresis for Port F,
  87           Port G and Port H and other processor signal inputs.
  88           The Schmitt trigger enables can be set only for pin groups.
  89           Saying Y will overwrite the default reset or boot loader
  90           initialization.
  91
  92 menu "PORT F"
  93         depends on BFIN_HYSTERESIS_CONTROL
  94 config GPIO_HYST_PORTF_0_7
  95         bool "Enable Hysteresis on PORTF {0...7}"
  96 config GPIO_HYST_PORTF_8_9
  97         bool "Enable Hysteresis on PORTF {8, 9}"
  98 config GPIO_HYST_PORTF_10
  99         bool "Enable Hysteresis on PORTF 10"
 100 config GPIO_HYST_PORTF_11
 101         bool "Enable Hysteresis on PORTF 11"
 102 config GPIO_HYST_PORTF_12_13
 103         bool "Enable Hysteresis on PORTF {12, 13}"
 104 config GPIO_HYST_PORTF_14_15
 105         bool "Enable Hysteresis on PORTF {14, 15}"
 106 endmenu
 107
 108 menu "PORT G"
 109         depends on BFIN_HYSTERESIS_CONTROL
 110 config GPIO_HYST_PORTG_0
 111         bool "Enable Hysteresis on PORTG 0"
 112 config GPIO_HYST_PORTG_1_4
 113         bool "Enable Hysteresis on PORTG {1...4}"
 114 config GPIO_HYST_PORTG_5_6
 115         bool "Enable Hysteresis on PORTG {5, 6}"
 116 config GPIO_HYST_PORTG_7_8
 117         bool "Enable Hysteresis on PORTG {7, 8}"
 118 config GPIO_HYST_PORTG_9
 119         bool "Enable Hysteresis on PORTG 9"
 120 config GPIO_HYST_PORTG_10
 121         bool "Enable Hysteresis on PORTG 10"
 122 config GPIO_HYST_PORTG_11_13
 123         bool "Enable Hysteresis on PORTG {11...13}"
 124 config GPIO_HYST_PORTG_14_15
 125         bool "Enable Hysteresis on PORTG {14, 15}"
 126 endmenu
 127
 128 menu "PORT H"
 129         depends on BFIN_HYSTERESIS_CONTROL
 130 config GPIO_HYST_PORTH_0_7
 131         bool "Enable Hysteresis on PORTH {0...7}"
 132 config GPIO_HYST_PORTH_8
 133         bool "Enable Hysteresis on PORTH 8"
 134 config GPIO_HYST_PORTH_9_15
 135         bool "Enable Hysteresis on PORTH {9...15}"
 136 endmenu
 137
 138 menu "None-GPIO"
 139         depends on BFIN_HYSTERESIS_CONTROL
 140 config NONEGPIO_HYST_TMR0_FS1_PPICLK
 141         bool "Enable Hysteresis on {TMR0, PPI_FS1, PPI_CLK}"
 142 config NONEGPIO_HYST_NMI_RST_BMODE
 143         bool "Enable Hysteresis on {NMI, RESET, BMODE}"
 144 config NONEGPIO_HYST_JTAG
 145         bool "Enable Hysteresis on JTAG"
 146 endmenu
 147
 148 comment "Interrupt Priority Assignment"
 149 menu "Priority"
 150
 151 config IRQ_PLL_WAKEUP
 152         int "IRQ_PLL_WAKEUP"
 153         default 7
 154 config IRQ_DMA0_ERROR
 155         int "IRQ_DMA0_ERROR"
 156         default 7
 157 config IRQ_DMAR0_BLK
 158         int "IRQ_DMAR0_BLK"
 159         default 7
 160 config IRQ_DMAR1_BLK
 161         int "IRQ_DMAR1_BLK"
 162         default 7
 163 config IRQ_DMAR0_OVR
 164         int "IRQ_DMAR0_OVR"
 165         default 7
 166 config IRQ_DMAR1_OVR
 167         int "IRQ_DMAR1_OVR"
 168         default 7
 169 config IRQ_PPI_ERROR
 170         int "IRQ_PPI_ERROR"
 171         default 7
 172 config IRQ_MAC_ERROR
 173         int "IRQ_MAC_ERROR"
 174         default 7
 175 config IRQ_SPORT0_ERROR
 176         int "IRQ_SPORT0_ERROR"
 177         default 7
 178 config IRQ_SPORT1_ERROR
 179         int "IRQ_SPORT1_ERROR"
 180         default 7
 181 config IRQ_UART0_ERROR
 182         int "IRQ_UART0_ERROR"
 183         default 7
 184 config IRQ_UART1_ERROR
 185         int "IRQ_UART1_ERROR"
 186         default 7
 187 config IRQ_RTC
 188         int "IRQ_RTC"
 189         default 8
 190 config IRQ_PPI
 191         int "IRQ_PPI"
 192         default 8
 193 config IRQ_SPORT0_RX
 194         int "IRQ_SPORT0_RX"
 195         default 9
 196 config IRQ_SPORT0_TX
 197         int "IRQ_SPORT0_TX"
 198         default 9
 199 config IRQ_SPORT1_RX
 200         int "IRQ_SPORT1_RX"
 201         default 9
 202 config IRQ_SPORT1_TX
 203         int "IRQ_SPORT1_TX"
 204         default 9
 205 config IRQ_TWI
 206         int "IRQ_TWI"
 207         default 10
 208 config IRQ_SPI
 209         int "IRQ_SPI"
 210         default 10
 211 config IRQ_UART0_RX
 212         int "IRQ_UART0_RX"
 213         default 10
 214 config IRQ_UART0_TX
 215         int "IRQ_UART0_TX"
 216         default 10
 217 config IRQ_UART1_RX
 218         int "IRQ_UART1_RX"
 219         default 10
 220 config IRQ_UART1_TX
 221         int "IRQ_UART1_TX"
 222         default 10
 223 config IRQ_OPTSEC
 224         int "IRQ_OPTSEC"
 225         default 11
 226 config IRQ_CNT
 227         int "IRQ_CNT"
 228         default 11
 229 config IRQ_MAC_RX
 230         int "IRQ_MAC_RX"
 231         default 11
 232 config IRQ_PORTH_INTA
 233         int "IRQ_PORTH_INTA"
 234         default 11
 235 config IRQ_MAC_TX
 236         int "IRQ_MAC_TX/NFC"
 237         default 11
 238 config IRQ_PORTH_INTB
 239         int "IRQ_PORTH_INTB"
 240         default 11
 241 config IRQ_TIMER0
 242         int "IRQ_TIMER0"
 243         default 7 if TICKSOURCE_GPTMR0
 244         default 8
 245 config IRQ_TIMER1
 246         int "IRQ_TIMER1"
 247         default 12
 248 config IRQ_TIMER2
 249         int "IRQ_TIMER2"
 250         default 12
 251 config IRQ_TIMER3
 252         int "IRQ_TIMER3"
 253         default 12
 254 config IRQ_TIMER4
 255         int "IRQ_TIMER4"
 256         default 12
 257 config IRQ_TIMER5
 258         int "IRQ_TIMER5"
 259         default 12
 260 config IRQ_TIMER6
 261         int "IRQ_TIMER6"
 262         default 12
 263 config IRQ_TIMER7
 264         int "IRQ_TIMER7"
 265         default 12
 266 config IRQ_PORTG_INTA
 267         int "IRQ_PORTG_INTA"
 268         default 12
 269 config IRQ_PORTG_INTB
 270         int "IRQ_PORTG_INTB"
 271         default 12
 272 config IRQ_MEM_DMA0
 273         int "IRQ_MEM_DMA0"
 274         default 13
 275 config IRQ_MEM_DMA1
 276         int "IRQ_MEM_DMA1"
 277         default 13
 278 config IRQ_WATCH
 279         int "IRQ_WATCH"
 280         default 13
 281 config IRQ_PORTF_INTA
 282         int "IRQ_PORTF_INTA"
 283         default 13
 284 config IRQ_PORTF_INTB
 285         int "IRQ_PORTF_INTB"
 286         default 13
 287 config IRQ_SPI_ERROR
 288         int "IRQ_SPI_ERROR"
 289         default 7
 290 config IRQ_NFC_ERROR
 291         int "IRQ_NFC_ERROR"
 292         default 7
 293 config IRQ_HDMA_ERROR
 294         int "IRQ_HDMA_ERROR"
 295         default 7
 296 config IRQ_HDMA
 297         int "IRQ_HDMA"
 298         default 7
 299 config IRQ_USB_EINT
 300         int "IRQ_USB_EINT"
 301         default 10
 302 config IRQ_USB_INT0
 303         int "IRQ_USB_INT0"
 304         default 10
 305 config IRQ_USB_INT1
 306         int "IRQ_USB_INT1"
 307         default 10
 308 config IRQ_USB_INT2
 309         int "IRQ_USB_INT2"
 310         default 10
 311 config IRQ_USB_DMA
 312         int "IRQ_USB_DMA"
 313         default 10
 314
 315         help
 316           Enter the priority numbers between 7-13 ONLY.  Others are Reserved.
 317           This applies to all the above.  It is not recommended to assign the
 318           highest priority number 7 to UART or any other device.
 319
 320 endmenu
 321
 322 endmenu
 323
 324 endif