2 * File: arch/blackfin/mach-bf533/H8606.c
3 * Based on: arch/blackfin/mach-bf533/stamp.c
4 * Author: Javier Herrero <jherrero@hvsistemas.es>
7 * Description: Board Info File for the HV Sistemas H8606 board
10 * Copyright 2005 National ICT Australia (NICTA)
11 * Copyright 2004-2006 Analog Devices Inc
12 * Copyright 2007,2008 HV Sistemas S.L.
14 * Bugs: Enter bugs at http://blackfin.uclinux.org/
16 * This program is free software; you can redistribute it and/or modify
17 * it under the terms of the GNU General Public License as published by
18 * the Free Software Foundation; either version 2 of the License, or
19 * (at your option) any later version.
21 * This program is distributed in the hope that it will be useful,
22 * but WITHOUT ANY WARRANTY; without even the implied warranty of
23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
24 * GNU General Public License for more details.
26 * You should have received a copy of the GNU General Public License
27 * along with this program; if not, see the file COPYING, or write
28 * to the Free Software Foundation, Inc.,
29 * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
32 #include <linux/device.h>
33 #include <linux/platform_device.h>
34 #include <linux/mtd/mtd.h>
35 #include <linux/mtd/partitions.h>
36 #include <linux/spi/spi.h>
37 #include <linux/spi/flash.h>
38 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
39 #include <linux/usb/isp1362.h>
41 #include <linux/irq.h>
44 #include <asm/bfin5xx_spi.h>
45 #include <asm/reboot.h>
46 #include <asm/portmux.h>
49 * Name the Board for the /proc/cpuinfo
51 const char bfin_board_name
[] = "HV Sistemas H8606";
53 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
54 static struct platform_device rtc_device
= {
61 * Driver needs to know address, irq and flag pin.
63 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
64 static struct resource dm9000_resources
[] = {
68 .flags
= IORESOURCE_MEM
,
73 .flags
= IORESOURCE_MEM
,
78 .flags
= (IORESOURCE_IRQ
| IORESOURCE_IRQ_HIGHEDGE
| IRQF_SHARED
| IRQF_TRIGGER_HIGH
),
82 static struct platform_device dm9000_device
= {
85 .resource
= dm9000_resources
,
86 .num_resources
= ARRAY_SIZE(dm9000_resources
),
90 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
91 #include <linux/smc91x.h>
93 static struct smc91x_platdata smc91x_info
= {
94 .flags
= SMC91X_USE_16BIT
| SMC91X_NOWAIT
,
95 .leda
= RPC_LED_100_10
,
96 .ledb
= RPC_LED_TX_RX
,
99 static struct resource smc91x_resources
[] = {
101 .name
= "smc91x-regs",
103 .end
= 0x20300300 + 16,
104 .flags
= IORESOURCE_MEM
,
106 .start
= IRQ_PROG_INTB
,
107 .end
= IRQ_PROG_INTB
,
108 .flags
= IORESOURCE_IRQ
| IORESOURCE_IRQ_HIGHLEVEL
,
112 .flags
= IORESOURCE_IRQ
| IORESOURCE_IRQ_HIGHLEVEL
,
116 static struct platform_device smc91x_device
= {
119 .num_resources
= ARRAY_SIZE(smc91x_resources
),
120 .resource
= smc91x_resources
,
122 .platform_data
= &smc91x_info
,
127 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
128 static struct resource net2272_bfin_resources
[] = {
131 .end
= 0x20300000 + 0x100,
132 .flags
= IORESOURCE_MEM
,
136 .flags
= IORESOURCE_IRQ
| IORESOURCE_IRQ_HIGHLEVEL
,
140 static struct platform_device net2272_bfin_device
= {
143 .num_resources
= ARRAY_SIZE(net2272_bfin_resources
),
144 .resource
= net2272_bfin_resources
,
148 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
149 /* all SPI peripherals info goes here */
151 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
152 static struct mtd_partition bfin_spi_flash_partitions
[] = {
154 .name
= "bootloader (spi)",
157 .mask_flags
= MTD_CAP_ROM
159 .name
= "fpga (spi)",
163 .name
= "linux kernel (spi)",
167 .name
= "jffs2 root file system (spi)",
173 static struct flash_platform_data bfin_spi_flash_data
= {
175 .parts
= bfin_spi_flash_partitions
,
176 .nr_parts
= ARRAY_SIZE(bfin_spi_flash_partitions
),
180 /* SPI flash chip (m25p64) */
181 static struct bfin5xx_spi_chip spi_flash_chip_info
= {
182 .enable_dma
= 0, /* use dma transfer with this chip*/
187 #if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
189 static struct bfin5xx_spi_chip spi_adc_chip_info
= {
191 .enable_dma
= 1, /* use dma transfer with this chip*/
196 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
197 static struct bfin5xx_spi_chip ad1836_spi_chip_info
= {
204 /* Notice: for blackfin, the speed_hz is the value of register
205 * SPI_BAUD, not the real baudrate */
206 static struct spi_board_info bfin_spi_board_info
[] __initdata
= {
207 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
209 /* the modalias must be the same as spi device driver name */
210 .modalias
= "m25p80", /* Name of spi_driver for this device */
211 /* this value is the baudrate divisor */
212 .max_speed_hz
= 50000000, /* actual baudrate is SCLK/(2xspeed_hz) */
213 .bus_num
= 0, /* Framework bus number */
214 .chip_select
= 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/
215 .platform_data
= &bfin_spi_flash_data
,
216 .controller_data
= &spi_flash_chip_info
,
221 #if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
223 .modalias
= "bfin_spi_adc", /* Name of spi_driver for this device */
224 .max_speed_hz
= 4, /* actual baudrate is SCLK/(2xspeed_hz) */
225 .bus_num
= 1, /* Framework bus number */
226 .chip_select
= 1, /* Framework chip select. */
227 .platform_data
= NULL
, /* No spi_driver specific config */
228 .controller_data
= &spi_adc_chip_info
,
232 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
234 .modalias
= "ad1836",
237 .chip_select
= CONFIG_SND_BLACKFIN_SPI_PFBIT
,
238 .controller_data
= &ad1836_spi_chip_info
,
245 static struct resource bfin_spi0_resource
[] = {
247 .start
= SPI0_REGBASE
,
248 .end
= SPI0_REGBASE
+ 0xFF,
249 .flags
= IORESOURCE_MEM
,
254 .flags
= IORESOURCE_DMA
,
259 .flags
= IORESOURCE_IRQ
,
264 /* SPI controller data */
265 static struct bfin5xx_spi_master bfin_spi0_info
= {
267 .enable_dma
= 1, /* master has the ability to do dma transfer */
268 .pin_req
= {P_SPI0_SCK
, P_SPI0_MISO
, P_SPI0_MOSI
, 0},
271 static struct platform_device bfin_spi0_device
= {
273 .id
= 0, /* Bus number */
274 .num_resources
= ARRAY_SIZE(bfin_spi0_resource
),
275 .resource
= bfin_spi0_resource
,
277 .platform_data
= &bfin_spi0_info
, /* Passed to driver */
280 #endif /* spi master and devices */
282 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
283 static struct platform_device bfin_fb_device
= {
288 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
289 static struct resource bfin_uart_resources
[] = {
293 .flags
= IORESOURCE_MEM
,
297 static struct platform_device bfin_uart_device
= {
300 .num_resources
= ARRAY_SIZE(bfin_uart_resources
),
301 .resource
= bfin_uart_resources
,
305 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
306 #ifdef CONFIG_BFIN_SIR0
307 static struct resource bfin_sir0_resources
[] = {
311 .flags
= IORESOURCE_MEM
,
314 .start
= IRQ_UART0_RX
,
315 .end
= IRQ_UART0_RX
+1,
316 .flags
= IORESOURCE_IRQ
,
319 .start
= CH_UART0_RX
,
320 .end
= CH_UART0_RX
+1,
321 .flags
= IORESOURCE_DMA
,
325 static struct platform_device bfin_sir0_device
= {
328 .num_resources
= ARRAY_SIZE(bfin_sir0_resources
),
329 .resource
= bfin_sir0_resources
,
334 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
336 #include <linux/serial_8250.h>
337 #include <linux/serial.h>
340 * Configuration for two 16550 UARTS in FPGA at addresses 0x20200000 and 0x202000010.
341 * running at half system clock, both with interrupt output or-ed to PF8. Change to
342 * suit different FPGA configuration, or to suit real 16550 UARTS connected to the bus
345 static struct plat_serial8250_port serial8250_platform_data
[] = {
347 .membase
= (void *)0x20200000,
348 .mapbase
= 0x20200000,
350 .flags
= UPF_BOOT_AUTOCONF
| UART_CONFIG_TYPE
,
355 .membase
= (void *)0x20200010,
356 .mapbase
= 0x20200010,
358 .flags
= UPF_BOOT_AUTOCONF
| UART_CONFIG_TYPE
,
366 static struct platform_device serial8250_device
= {
367 .id
= PLAT8250_DEV_PLATFORM
,
368 .name
= "serial8250",
370 .platform_data
= serial8250_platform_data
,
376 #if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE)
379 * Configuration for one OpenCores keyboard controller in FPGA at address 0x20200030,
380 * interrupt output wired to PF9. Change to suit different FPGA configuration
383 static struct resource opencores_kbd_resources
[] = {
386 .end
= 0x20300030 + 2,
387 .flags
= IORESOURCE_MEM
,
392 .flags
= IORESOURCE_IRQ
| IORESOURCE_IRQ_HIGHEDGE
,
396 static struct platform_device opencores_kbd_device
= {
398 .name
= "opencores-kbd",
399 .resource
= opencores_kbd_resources
,
400 .num_resources
= ARRAY_SIZE(opencores_kbd_resources
),
404 static struct platform_device
*h8606_devices
[] __initdata
= {
405 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
409 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
413 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
417 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
418 &net2272_bfin_device
,
421 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
425 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
429 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
433 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
434 #ifdef CONFIG_BFIN_SIR0
439 #if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE)
440 &opencores_kbd_device
,
444 static int __init
H8606_init(void)
446 printk(KERN_INFO
"HV Sistemas H8606 board support by http://www.hvsistemas.com\n");
447 printk(KERN_INFO
"%s(): registering device resources\n", __func__
);
448 platform_add_devices(h8606_devices
, ARRAY_SIZE(h8606_devices
));
449 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
450 spi_register_board_info(bfin_spi_board_info
, ARRAY_SIZE(bfin_spi_board_info
));
455 arch_initcall(H8606_init
);