Blackfin: bfin_serial.h: turn default port wrappers into stubs
[deliverable/linux.git] / arch / blackfin / mach-bf537 / include / mach / bfin_serial_5xx.h
1 /*
2 * Copyright 2006-2009 Analog Devices Inc.
3 *
4 * Licensed under the GPL-2 or later
5 */
6
7 #include <asm/dma.h>
8 #include <asm/portmux.h>
9
10 #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
11 # define CONFIG_SERIAL_BFIN_CTSRTS
12
13 # ifndef CONFIG_UART0_CTS_PIN
14 # define CONFIG_UART0_CTS_PIN -1
15 # endif
16
17 # ifndef CONFIG_UART0_RTS_PIN
18 # define CONFIG_UART0_RTS_PIN -1
19 # endif
20
21 # ifndef CONFIG_UART1_CTS_PIN
22 # define CONFIG_UART1_CTS_PIN -1
23 # endif
24
25 # ifndef CONFIG_UART1_RTS_PIN
26 # define CONFIG_UART1_RTS_PIN -1
27 # endif
28 #endif
29
30 struct bfin_serial_res {
31 unsigned long uart_base_addr;
32 int uart_irq;
33 int uart_status_irq;
34 #ifdef CONFIG_SERIAL_BFIN_DMA
35 unsigned int uart_tx_dma_channel;
36 unsigned int uart_rx_dma_channel;
37 #endif
38 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
39 int uart_cts_pin;
40 int uart_rts_pin;
41 #endif
42 };
43
44 struct bfin_serial_res bfin_serial_resource[] = {
45 #ifdef CONFIG_SERIAL_BFIN_UART0
46 {
47 0xFFC00400,
48 IRQ_UART0_RX,
49 IRQ_UART0_ERROR,
50 #ifdef CONFIG_SERIAL_BFIN_DMA
51 CH_UART0_TX,
52 CH_UART0_RX,
53 #endif
54 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
55 CONFIG_UART0_CTS_PIN,
56 CONFIG_UART0_RTS_PIN,
57 #endif
58 },
59 #endif
60 #ifdef CONFIG_SERIAL_BFIN_UART1
61 {
62 0xFFC02000,
63 IRQ_UART1_RX,
64 IRQ_UART1_ERROR,
65 #ifdef CONFIG_SERIAL_BFIN_DMA
66 CH_UART1_TX,
67 CH_UART1_RX,
68 #endif
69 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
70 CONFIG_UART1_CTS_PIN,
71 CONFIG_UART1_RTS_PIN,
72 #endif
73 },
74 #endif
75 };
76
77 #define DRIVER_NAME "bfin-uart"
78
79 #include <asm/bfin_serial.h>
This page took 0.077345 seconds and 5 git commands to generate.