arch/blackfin/mach-bf561/secondary.S

   1 /*
   2  * BF561 coreB bootstrap file
   3  *
   4  * Copyright 2007-2009 Analog Devices Inc.
   5  *               Philippe Gerum <rpm@xenomai.org>
   6  *
   7  * Licensed under the GPL-2 or later.
   8  */
   9
  10 #include <linux/linkage.h>
  11 #include <linux/init.h>
  12 #include <asm/blackfin.h>
  13 #include <asm/asm-offsets.h>
  14 #include <asm/trace.h>
  15
  16 /*
  17  * This code must come first as CoreB is hardcoded (in hardware)
  18  * to start at the beginning of its L1 instruction memory.
  19  */
  20 .section .l1.text.head
  21
  22 /* Lay the initial stack into the L1 scratch area of Core B */
  23 #define INITIAL_STACK   (COREB_L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
  24
  25 ENTRY(_coreb_trampoline_start)
  26         /* Enable Cycle Counter and Nesting Of Interrupts */
  27 #ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
  28         R0 = SYSCFG_SNEN;
  29 #else
  30         R0 = SYSCFG_SNEN | SYSCFG_CCEN;
  31 #endif
  32         SYSCFG = R0;
  33
  34         /* Optimization register tricks: keep a base value in the
  35          * reserved P registers so we use the load/store with an
  36          * offset syntax.  R0 = [P5 + <constant>];
  37          *   P5 - core MMR base
  38          *   R6 - 0
  39          */
  40         r6 = 0;
  41         p5.l = 0;
  42         p5.h = hi(COREMMR_BASE);
  43
  44         /* Zero out registers required by Blackfin ABI */
  45
  46         /* Disable circular buffers */
  47         L0 = r6;
  48         L1 = r6;
  49         L2 = r6;
  50         L3 = r6;
  51
  52         /* Disable hardware loops in case we were started by 'go' */
  53         LC0 = r6;
  54         LC1 = r6;
  55
  56         /*
  57          * Clear ITEST_COMMAND and DTEST_COMMAND registers,
  58          * Leaving these as non-zero can confuse the emulator
  59          */
  60         [p5 + (DTEST_COMMAND - COREMMR_BASE)] = r6;
  61         [p5 + (ITEST_COMMAND - COREMMR_BASE)] = r6;
  62         CSYNC;
  63
  64         trace_buffer_init(p0,r0);
  65
  66         /* Turn off the icache */
  67         r1 = [p5 + (IMEM_CONTROL - COREMMR_BASE)];
  68         BITCLR (r1, ENICPLB_P);
  69         [p5 + (IMEM_CONTROL - COREMMR_BASE)] = r1;
  70         SSYNC;
  71
  72         /* Turn off the dcache */
  73         r1 = [p5 + (DMEM_CONTROL - COREMMR_BASE)];
  74         BITCLR (r1, ENDCPLB_P);
  75         [p5 + (DMEM_CONTROL - COREMMR_BASE)] = r1;
  76         SSYNC;
  77
  78         /* in case of double faults, save a few things */
  79         p1.l = _initial_pda_coreb;
  80         p1.h = _initial_pda_coreb;
  81         r4 = RETX;
  82 #ifdef CONFIG_DEBUG_DOUBLEFAULT
  83         /* Only save these if we are storing them,
  84          * This happens here, since L1 gets clobbered
  85          * below
  86          */
  87         GET_PDA(p0, r0);
  88         r0 = [p0 + PDA_DF_RETX];
  89         r1 = [p0 + PDA_DF_DCPLB];
  90         r2 = [p0 + PDA_DF_ICPLB];
  91         r3 = [p0 + PDA_DF_SEQSTAT];
  92         [p1 + PDA_INIT_DF_RETX] = r0;
  93         [p1 + PDA_INIT_DF_DCPLB] = r1;
  94         [p1 + PDA_INIT_DF_ICPLB] = r2;
  95         [p1 + PDA_INIT_DF_SEQSTAT] = r3;
  96 #endif
  97         [p1 + PDA_INIT_RETX] = r4;
  98
  99         /* Initialize stack pointer */
 100         sp.l = lo(INITIAL_STACK);
 101         sp.h = hi(INITIAL_STACK);
 102         fp = sp;
 103         usp = sp;
 104
 105         /* This section keeps the processor in supervisor mode
 106          * during core B startup.  Branches to the idle task.
 107          */
 108
 109         /* EVT15 = _real_start */
 110
 111         p1.l = _coreb_start;
 112         p1.h = _coreb_start;
 113         [p5 + (EVT15 - COREMMR_BASE)] = p1;
 114         csync;
 115
 116         r0 = EVT_IVG15 (z);
 117         sti r0;
 118
 119         raise 15;
 120         p0.l = .LWAIT_HERE;
 121         p0.h = .LWAIT_HERE;
 122         reti = p0;
 123 #if defined(ANOMALY_05000281)
 124         nop; nop; nop;
 125 #endif
 126         rti;
 127
 128 .LWAIT_HERE:
 129         jump .LWAIT_HERE;
 130 ENDPROC(_coreb_trampoline_start)
 131
 132 #ifdef CONFIG_HOTPLUG_CPU
 133 .section ".text"
 134 ENTRY(_coreb_die)
 135         sp.l = lo(INITIAL_STACK);
 136         sp.h = hi(INITIAL_STACK);
 137         fp = sp;
 138         usp = sp;
 139
 140         CLI R2;
 141         SSYNC;
 142         IDLE;
 143         STI R2;
 144
 145         R0 = IWR_DISABLE_ALL;
 146         P0.H = hi(SYSMMR_BASE);
 147         P0.L = lo(SYSMMR_BASE);
 148         [P0 + (SICB_IWR0 - SYSMMR_BASE)] = R0;
 149         [P0 + (SICB_IWR1 - SYSMMR_BASE)] = R0;
 150         SSYNC;
 151
 152         p0.h = hi(COREB_L1_CODE_START);
 153         p0.l = lo(COREB_L1_CODE_START);
 154         jump (p0);
 155 ENDPROC(_coreb_die)
 156 #endif
 157
 158 __INIT
 159 ENTRY(_coreb_start)
 160         [--sp] = reti;
 161
 162         p0.l = lo(WDOGB_CTL);
 163         p0.h = hi(WDOGB_CTL);
 164         r0 = 0xAD6(z);
 165         w[p0] = r0;     /* Clear the watchdog. */
 166         ssync;
 167
 168         /*
 169          * switch to IDLE stack.
 170          */
 171         p0.l = _secondary_stack;
 172         p0.h = _secondary_stack;
 173         sp = [p0];
 174         usp = sp;
 175         fp = sp;
 176 #ifdef CONFIG_HOTPLUG_CPU
 177         p0.l = _hotplug_coreb;
 178         p0.h = _hotplug_coreb;
 179         r0 = [p0];
 180         cc = BITTST(r0, 0);
 181         if cc jump 3f;
 182 #endif
 183         sp += -12;
 184         call _init_pda
 185         sp += 12;
 186 #ifdef CONFIG_HOTPLUG_CPU
 187 3:
 188 #endif
 189         call _secondary_start_kernel;
 190 .L_exit:
 191         jump.s  .L_exit;
 192 ENDPROC(_coreb_start)