Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney...
[deliverable/linux.git] / arch / blackfin / mach-common / interrupt.S
1 /*
2 * File: arch/blackfin/mach-common/interrupt.S
3 * Based on:
4 * Author: D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>
5 * Kenneth Albanowski <kjahds@kjahds.com>
6 *
7 * Created: ?
8 * Description: Interrupt Entries
9 *
10 * Modified:
11 * Copyright 2004-2006 Analog Devices Inc.
12 *
13 * Bugs: Enter bugs at http://blackfin.uclinux.org/
14 *
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2 of the License, or
18 * (at your option) any later version.
19 *
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
24 *
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, see the file COPYING, or write
27 * to the Free Software Foundation, Inc.,
28 * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
29 */
30
31 #include <asm/blackfin.h>
32 #include <asm/mach/irq.h>
33 #include <linux/linkage.h>
34 #include <asm/entry.h>
35 #include <asm/asm-offsets.h>
36 #include <asm/trace.h>
37 #include <asm/traps.h>
38 #include <asm/thread_info.h>
39
40 #include <asm/mach-common/context.S>
41
42 .extern _ret_from_exception
43
44 #ifdef CONFIG_I_ENTRY_L1
45 .section .l1.text
46 #else
47 .text
48 #endif
49
50 .align 4 /* just in case */
51
52 /* Common interrupt entry code. First we do CLI, then push
53 * RETI, to keep interrupts disabled, but to allow this state to be changed
54 * by local_bh_enable.
55 * R0 contains the interrupt number, while R1 may contain the value of IPEND,
56 * or garbage if IPEND won't be needed by the ISR. */
57 __common_int_entry:
58 [--sp] = fp;
59 [--sp] = usp;
60
61 [--sp] = i0;
62 [--sp] = i1;
63 [--sp] = i2;
64 [--sp] = i3;
65
66 [--sp] = m0;
67 [--sp] = m1;
68 [--sp] = m2;
69 [--sp] = m3;
70
71 [--sp] = l0;
72 [--sp] = l1;
73 [--sp] = l2;
74 [--sp] = l3;
75
76 [--sp] = b0;
77 [--sp] = b1;
78 [--sp] = b2;
79 [--sp] = b3;
80 [--sp] = a0.x;
81 [--sp] = a0.w;
82 [--sp] = a1.x;
83 [--sp] = a1.w;
84
85 [--sp] = LC0;
86 [--sp] = LC1;
87 [--sp] = LT0;
88 [--sp] = LT1;
89 [--sp] = LB0;
90 [--sp] = LB1;
91
92 [--sp] = ASTAT;
93
94 [--sp] = r0; /* Skip reserved */
95 [--sp] = RETS;
96 r2 = RETI;
97 [--sp] = r2;
98 [--sp] = RETX;
99 [--sp] = RETN;
100 [--sp] = RETE;
101 [--sp] = SEQSTAT;
102 [--sp] = r1; /* IPEND - R1 may or may not be set up before jumping here. */
103
104 /* Switch to other method of keeping interrupts disabled. */
105 #ifdef CONFIG_DEBUG_HWERR
106 r1 = 0x3f;
107 sti r1;
108 #else
109 cli r1;
110 #endif
111 [--sp] = RETI; /* orig_pc */
112 /* Clear all L registers. */
113 r1 = 0 (x);
114 l0 = r1;
115 l1 = r1;
116 l2 = r1;
117 l3 = r1;
118 #ifdef CONFIG_FRAME_POINTER
119 fp = 0;
120 #endif
121
122 #if ANOMALY_05000283 || ANOMALY_05000315
123 cc = r7 == r7;
124 p5.h = HI(CHIPID);
125 p5.l = LO(CHIPID);
126 if cc jump 1f;
127 r7.l = W[p5];
128 1:
129 #endif
130 r1 = sp;
131 SP += -12;
132 call _do_irq;
133 SP += 12;
134 call _return_from_int;
135 .Lcommon_restore_context:
136 RESTORE_CONTEXT
137 rti;
138
139 /* interrupt routine for ivhw - 5 */
140 ENTRY(_evt_ivhw)
141 SAVE_ALL_SYS
142 #ifdef CONFIG_FRAME_POINTER
143 fp = 0;
144 #endif
145
146 #if ANOMALY_05000283
147 cc = r7 == r7;
148 p5.h = HI(CHIPID);
149 p5.l = LO(CHIPID);
150 if cc jump 1f;
151 r7.l = W[p5];
152 1:
153 #endif
154
155 #ifdef CONFIG_HARDWARE_PM
156 r7 = [sp + PT_SEQSTAT];
157 r7 = r7 >>> 0xe;
158 r6 = 0x1F;
159 r7 = r7 & r6;
160 r5 = 0x12;
161 cc = r7 == r5;
162 if cc jump .Lcall_do_ovf; /* deal with performance counter overflow */
163 #endif
164 # We are going to dump something out, so make sure we print IPEND properly
165 p2.l = lo(IPEND);
166 p2.h = hi(IPEND);
167 r0 = [p2];
168 [sp + PT_IPEND] = r0;
169
170 /* set the EXCAUSE to HWERR for trap_c */
171 r0 = [sp + PT_SEQSTAT];
172 R1.L = LO(VEC_HWERR);
173 R1.H = HI(VEC_HWERR);
174 R0 = R0 | R1;
175 [sp + PT_SEQSTAT] = R0;
176
177 r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
178 SP += -12;
179 call _trap_c;
180 SP += 12;
181
182 call _ret_from_exception;
183 .Lcommon_restore_all_sys:
184 RESTORE_ALL_SYS
185 rti;
186
187 #ifdef CONFIG_HARDWARE_PM
188 .Lcall_do_ovf:
189
190 SP += -12;
191 call _pm_overflow;
192 SP += 12;
193
194 jump .Lcommon_restore_all_sys;
195 #endif
196
197 ENDPROC(_evt_ivhw)
198
199 /* Interrupt routine for evt2 (NMI).
200 * We don't actually use this, so just return.
201 * For inner circle type details, please see:
202 * http://docs.blackfin.uclinux.org/doku.php?id=linux:nmi
203 */
204 ENTRY(_evt_nmi)
205 .weak _evt_nmi
206 rtn;
207 ENDPROC(_evt_nmi)
208
209 /* interrupt routine for core timer - 6 */
210 ENTRY(_evt_timer)
211 TIMER_INTERRUPT_ENTRY(EVT_IVTMR_P)
212
213 /* interrupt routine for evt7 - 7 */
214 ENTRY(_evt_evt7)
215 INTERRUPT_ENTRY(EVT_IVG7_P)
216 ENTRY(_evt_evt8)
217 INTERRUPT_ENTRY(EVT_IVG8_P)
218 ENTRY(_evt_evt9)
219 INTERRUPT_ENTRY(EVT_IVG9_P)
220 ENTRY(_evt_evt10)
221 INTERRUPT_ENTRY(EVT_IVG10_P)
222 ENTRY(_evt_evt11)
223 INTERRUPT_ENTRY(EVT_IVG11_P)
224 ENTRY(_evt_evt12)
225 INTERRUPT_ENTRY(EVT_IVG12_P)
226 ENTRY(_evt_evt13)
227 INTERRUPT_ENTRY(EVT_IVG13_P)
228
229
230 /* interrupt routine for system_call - 15 */
231 ENTRY(_evt_system_call)
232 SAVE_CONTEXT_SYSCALL
233 #ifdef CONFIG_FRAME_POINTER
234 fp = 0;
235 #endif
236 call _system_call;
237 jump .Lcommon_restore_context;
238 ENDPROC(_evt_system_call)
This page took 0.056475 seconds and 5 git commands to generate.