frv: Remove stale irq_chip.end
[deliverable/linux.git] / arch / frv / kernel / irq.c
1 /* irq.c: FRV IRQ handling
2 *
3 * Copyright (C) 2003, 2004, 2006 Red Hat, Inc. All Rights Reserved.
4 * Written by David Howells (dhowells@redhat.com)
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
10 */
11
12 #include <linux/ptrace.h>
13 #include <linux/errno.h>
14 #include <linux/signal.h>
15 #include <linux/sched.h>
16 #include <linux/ioport.h>
17 #include <linux/interrupt.h>
18 #include <linux/timex.h>
19 #include <linux/random.h>
20 #include <linux/init.h>
21 #include <linux/kernel_stat.h>
22 #include <linux/irq.h>
23 #include <linux/proc_fs.h>
24 #include <linux/seq_file.h>
25 #include <linux/module.h>
26 #include <linux/bitops.h>
27
28 #include <asm/atomic.h>
29 #include <asm/io.h>
30 #include <asm/smp.h>
31 #include <asm/system.h>
32 #include <asm/uaccess.h>
33 #include <asm/pgalloc.h>
34 #include <asm/delay.h>
35 #include <asm/irq.h>
36 #include <asm/irc-regs.h>
37 #include <asm/gdb-stub.h>
38
39 #define set_IRR(N,A,B,C,D) __set_IRR(N, (A << 28) | (B << 24) | (C << 20) | (D << 16))
40
41 extern void __init fpga_init(void);
42 #ifdef CONFIG_FUJITSU_MB93493
43 extern void __init mb93493_init(void);
44 #endif
45
46 #define __reg16(ADDR) (*(volatile unsigned short *)(ADDR))
47
48 atomic_t irq_err_count;
49
50 /*
51 * Generic, controller-independent functions:
52 */
53 int show_interrupts(struct seq_file *p, void *v)
54 {
55 int i = *(loff_t *) v, cpu;
56 struct irqaction * action;
57 unsigned long flags;
58
59 if (i == 0) {
60 char cpuname[12];
61
62 seq_printf(p, " ");
63 for_each_present_cpu(cpu) {
64 sprintf(cpuname, "CPU%d", cpu);
65 seq_printf(p, " %10s", cpuname);
66 }
67 seq_putc(p, '\n');
68 }
69
70 if (i < NR_IRQS) {
71 raw_spin_lock_irqsave(&irq_desc[i].lock, flags);
72 action = irq_desc[i].action;
73 if (action) {
74 seq_printf(p, "%3d: ", i);
75 for_each_present_cpu(cpu)
76 seq_printf(p, "%10u ", kstat_irqs_cpu(i, cpu));
77 seq_printf(p, " %10s", irq_desc[i].chip->name ? : "-");
78 seq_printf(p, " %s", action->name);
79 for (action = action->next;
80 action;
81 action = action->next)
82 seq_printf(p, ", %s", action->name);
83
84 seq_putc(p, '\n');
85 }
86
87 raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags);
88 } else if (i == NR_IRQS) {
89 seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count));
90 }
91
92 return 0;
93 }
94
95 /*
96 * on-CPU PIC operations
97 */
98 static void frv_cpupic_ack(unsigned int irqlevel)
99 {
100 __clr_RC(irqlevel);
101 __clr_IRL();
102 }
103
104 static void frv_cpupic_mask(unsigned int irqlevel)
105 {
106 __set_MASK(irqlevel);
107 }
108
109 static void frv_cpupic_mask_ack(unsigned int irqlevel)
110 {
111 __set_MASK(irqlevel);
112 __clr_RC(irqlevel);
113 __clr_IRL();
114 }
115
116 static void frv_cpupic_unmask(unsigned int irqlevel)
117 {
118 __clr_MASK(irqlevel);
119 }
120
121 static struct irq_chip frv_cpu_pic = {
122 .name = "cpu",
123 .ack = frv_cpupic_ack,
124 .mask = frv_cpupic_mask,
125 .mask_ack = frv_cpupic_mask_ack,
126 .unmask = frv_cpupic_unmask,
127 };
128
129 /*
130 * handles all normal device IRQs
131 * - registers are referred to by the __frame variable (GR28)
132 * - IRQ distribution is complicated in this arch because of the many PICs, the
133 * way they work and the way they cascade
134 */
135 asmlinkage void do_IRQ(void)
136 {
137 irq_enter();
138 generic_handle_irq(__get_IRL());
139 irq_exit();
140 }
141
142 /*
143 * handles all NMIs when not co-opted by the debugger
144 * - registers are referred to by the __frame variable (GR28)
145 */
146 asmlinkage void do_NMI(void)
147 {
148 }
149
150 /*
151 * initialise the interrupt system
152 */
153 void __init init_IRQ(void)
154 {
155 int level;
156
157 for (level = 1; level <= 14; level++)
158 set_irq_chip_and_handler(level, &frv_cpu_pic,
159 handle_level_irq);
160
161 set_irq_handler(IRQ_CPU_TIMER0, handle_edge_irq);
162
163 /* set the trigger levels for internal interrupt sources
164 * - timers all falling-edge
165 * - ERR0 is rising-edge
166 * - all others are high-level
167 */
168 __set_IITMR(0, 0x003f0000); /* DMA0-3, TIMER0-2 */
169 __set_IITMR(1, 0x20000000); /* ERR0-1, UART0-1, DMA4-7 */
170
171 /* route internal interrupts */
172 set_IRR(4, IRQ_DMA3_LEVEL, IRQ_DMA2_LEVEL, IRQ_DMA1_LEVEL,
173 IRQ_DMA0_LEVEL);
174 set_IRR(5, 0, IRQ_TIMER2_LEVEL, IRQ_TIMER1_LEVEL, IRQ_TIMER0_LEVEL);
175 set_IRR(6, IRQ_GDBSTUB_LEVEL, IRQ_GDBSTUB_LEVEL,
176 IRQ_UART1_LEVEL, IRQ_UART0_LEVEL);
177 set_IRR(7, IRQ_DMA7_LEVEL, IRQ_DMA6_LEVEL, IRQ_DMA5_LEVEL,
178 IRQ_DMA4_LEVEL);
179
180 /* route external interrupts */
181 set_IRR(2, IRQ_XIRQ7_LEVEL, IRQ_XIRQ6_LEVEL, IRQ_XIRQ5_LEVEL,
182 IRQ_XIRQ4_LEVEL);
183 set_IRR(3, IRQ_XIRQ3_LEVEL, IRQ_XIRQ2_LEVEL, IRQ_XIRQ1_LEVEL,
184 IRQ_XIRQ0_LEVEL);
185
186 #if defined(CONFIG_MB93091_VDK)
187 __set_TM1(0x55550000); /* XIRQ7-0 all active low */
188 #elif defined(CONFIG_MB93093_PDK)
189 __set_TM1(0x15550000); /* XIRQ7 active high, 6-0 all active low */
190 #else
191 #error dont know external IRQ trigger levels for this setup
192 #endif
193
194 fpga_init();
195 #ifdef CONFIG_FUJITSU_MB93493
196 mb93493_init();
197 #endif
198 }
This page took 0.091435 seconds and 6 git commands to generate.