Add missing newlines to some uses of dev_<level> messages
[deliverable/linux.git] / arch / ia64 / sn / kernel / xpnet.c
1 /*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Copyright (C) 1999,2001-2005 Silicon Graphics, Inc. All rights reserved.
7 */
8
9
10 /*
11 * Cross Partition Network Interface (XPNET) support
12 *
13 * XPNET provides a virtual network layered on top of the Cross
14 * Partition communication layer.
15 *
16 * XPNET provides direct point-to-point and broadcast-like support
17 * for an ethernet-like device. The ethernet broadcast medium is
18 * replaced with a point-to-point message structure which passes
19 * pointers to a DMA-capable block that a remote partition should
20 * retrieve and pass to the upper level networking layer.
21 *
22 */
23
24
25 #include <linux/module.h>
26 #include <linux/kernel.h>
27 #include <linux/init.h>
28 #include <linux/ioport.h>
29 #include <linux/netdevice.h>
30 #include <linux/etherdevice.h>
31 #include <linux/delay.h>
32 #include <linux/ethtool.h>
33 #include <linux/mii.h>
34 #include <linux/smp.h>
35 #include <linux/string.h>
36 #include <asm/sn/bte.h>
37 #include <asm/sn/io.h>
38 #include <asm/sn/sn_sal.h>
39 #include <asm/types.h>
40 #include <asm/atomic.h>
41 #include <asm/sn/xp.h>
42
43
44 /*
45 * The message payload transferred by XPC.
46 *
47 * buf_pa is the physical address where the DMA should pull from.
48 *
49 * NOTE: for performance reasons, buf_pa should _ALWAYS_ begin on a
50 * cacheline boundary. To accomplish this, we record the number of
51 * bytes from the beginning of the first cacheline to the first useful
52 * byte of the skb (leadin_ignore) and the number of bytes from the
53 * last useful byte of the skb to the end of the last cacheline
54 * (tailout_ignore).
55 *
56 * size is the number of bytes to transfer which includes the skb->len
57 * (useful bytes of the senders skb) plus the leadin and tailout
58 */
59 struct xpnet_message {
60 u16 version; /* Version for this message */
61 u16 embedded_bytes; /* #of bytes embedded in XPC message */
62 u32 magic; /* Special number indicating this is xpnet */
63 u64 buf_pa; /* phys address of buffer to retrieve */
64 u32 size; /* #of bytes in buffer */
65 u8 leadin_ignore; /* #of bytes to ignore at the beginning */
66 u8 tailout_ignore; /* #of bytes to ignore at the end */
67 unsigned char data; /* body of small packets */
68 };
69
70 /*
71 * Determine the size of our message, the cacheline aligned size,
72 * and then the number of message will request from XPC.
73 *
74 * XPC expects each message to exist in an individual cacheline.
75 */
76 #define XPNET_MSG_SIZE (L1_CACHE_BYTES - XPC_MSG_PAYLOAD_OFFSET)
77 #define XPNET_MSG_DATA_MAX \
78 (XPNET_MSG_SIZE - (u64)(&((struct xpnet_message *)0)->data))
79 #define XPNET_MSG_ALIGNED_SIZE (L1_CACHE_ALIGN(XPNET_MSG_SIZE))
80 #define XPNET_MSG_NENTRIES (PAGE_SIZE / XPNET_MSG_ALIGNED_SIZE)
81
82
83 #define XPNET_MAX_KTHREADS (XPNET_MSG_NENTRIES + 1)
84 #define XPNET_MAX_IDLE_KTHREADS (XPNET_MSG_NENTRIES + 1)
85
86 /*
87 * Version number of XPNET implementation. XPNET can always talk to versions
88 * with same major #, and never talk to versions with a different version.
89 */
90 #define _XPNET_VERSION(_major, _minor) (((_major) << 4) | (_minor))
91 #define XPNET_VERSION_MAJOR(_v) ((_v) >> 4)
92 #define XPNET_VERSION_MINOR(_v) ((_v) & 0xf)
93
94 #define XPNET_VERSION _XPNET_VERSION(1,0) /* version 1.0 */
95 #define XPNET_VERSION_EMBED _XPNET_VERSION(1,1) /* version 1.1 */
96 #define XPNET_MAGIC 0x88786984 /* "XNET" */
97
98 #define XPNET_VALID_MSG(_m) \
99 ((XPNET_VERSION_MAJOR(_m->version) == XPNET_VERSION_MAJOR(XPNET_VERSION)) \
100 && (msg->magic == XPNET_MAGIC))
101
102 #define XPNET_DEVICE_NAME "xp0"
103
104
105 /*
106 * When messages are queued with xpc_send_notify, a kmalloc'd buffer
107 * of the following type is passed as a notification cookie. When the
108 * notification function is called, we use the cookie to decide
109 * whether all outstanding message sends have completed. The skb can
110 * then be released.
111 */
112 struct xpnet_pending_msg {
113 struct list_head free_list;
114 struct sk_buff *skb;
115 atomic_t use_count;
116 };
117
118 /* driver specific structure pointed to by the device structure */
119 struct xpnet_dev_private {
120 struct net_device_stats stats;
121 };
122
123 struct net_device *xpnet_device;
124
125 /*
126 * When we are notified of other partitions activating, we add them to
127 * our bitmask of partitions to which we broadcast.
128 */
129 static u64 xpnet_broadcast_partitions;
130 /* protect above */
131 static DEFINE_SPINLOCK(xpnet_broadcast_lock);
132
133 /*
134 * Since the Block Transfer Engine (BTE) is being used for the transfer
135 * and it relies upon cache-line size transfers, we need to reserve at
136 * least one cache-line for head and tail alignment. The BTE is
137 * limited to 8MB transfers.
138 *
139 * Testing has shown that changing MTU to greater than 64KB has no effect
140 * on TCP as the two sides negotiate a Max Segment Size that is limited
141 * to 64K. Other protocols May use packets greater than this, but for
142 * now, the default is 64KB.
143 */
144 #define XPNET_MAX_MTU (0x800000UL - L1_CACHE_BYTES)
145 /* 32KB has been determined to be the ideal */
146 #define XPNET_DEF_MTU (0x8000UL)
147
148
149 /*
150 * The partition id is encapsulated in the MAC address. The following
151 * define locates the octet the partid is in.
152 */
153 #define XPNET_PARTID_OCTET 1
154 #define XPNET_LICENSE_OCTET 2
155
156
157 /*
158 * Define the XPNET debug device structure that is to be used with dev_dbg(),
159 * dev_err(), dev_warn(), and dev_info().
160 */
161 struct device_driver xpnet_dbg_name = {
162 .name = "xpnet"
163 };
164
165 struct device xpnet_dbg_subname = {
166 .bus_id = {0}, /* set to "" */
167 .driver = &xpnet_dbg_name
168 };
169
170 struct device *xpnet = &xpnet_dbg_subname;
171
172 /*
173 * Packet was recevied by XPC and forwarded to us.
174 */
175 static void
176 xpnet_receive(partid_t partid, int channel, struct xpnet_message *msg)
177 {
178 struct sk_buff *skb;
179 bte_result_t bret;
180 struct xpnet_dev_private *priv =
181 (struct xpnet_dev_private *) xpnet_device->priv;
182
183
184 if (!XPNET_VALID_MSG(msg)) {
185 /*
186 * Packet with a different XPC version. Ignore.
187 */
188 xpc_received(partid, channel, (void *) msg);
189
190 priv->stats.rx_errors++;
191
192 return;
193 }
194 dev_dbg(xpnet, "received 0x%lx, %d, %d, %d\n", msg->buf_pa, msg->size,
195 msg->leadin_ignore, msg->tailout_ignore);
196
197
198 /* reserve an extra cache line */
199 skb = dev_alloc_skb(msg->size + L1_CACHE_BYTES);
200 if (!skb) {
201 dev_err(xpnet, "failed on dev_alloc_skb(%d)\n",
202 msg->size + L1_CACHE_BYTES);
203
204 xpc_received(partid, channel, (void *) msg);
205
206 priv->stats.rx_errors++;
207
208 return;
209 }
210
211 /*
212 * The allocated skb has some reserved space.
213 * In order to use bte_copy, we need to get the
214 * skb->data pointer moved forward.
215 */
216 skb_reserve(skb, (L1_CACHE_BYTES - ((u64)skb->data &
217 (L1_CACHE_BYTES - 1)) +
218 msg->leadin_ignore));
219
220 /*
221 * Update the tail pointer to indicate data actually
222 * transferred.
223 */
224 skb_put(skb, (msg->size - msg->leadin_ignore - msg->tailout_ignore));
225
226 /*
227 * Move the data over from the other side.
228 */
229 if ((XPNET_VERSION_MINOR(msg->version) == 1) &&
230 (msg->embedded_bytes != 0)) {
231 dev_dbg(xpnet, "copying embedded message. memcpy(0x%p, 0x%p, "
232 "%lu)\n", skb->data, &msg->data,
233 (size_t) msg->embedded_bytes);
234
235 skb_copy_to_linear_data(skb, &msg->data, (size_t)msg->embedded_bytes);
236 } else {
237 dev_dbg(xpnet, "transferring buffer to the skb->data area;\n\t"
238 "bte_copy(0x%p, 0x%p, %hu)\n", (void *)msg->buf_pa,
239 (void *)__pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)),
240 msg->size);
241
242 bret = bte_copy(msg->buf_pa,
243 __pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)),
244 msg->size, (BTE_NOTIFY | BTE_WACQUIRE), NULL);
245
246 if (bret != BTE_SUCCESS) {
247 // >>> Need better way of cleaning skb. Currently skb
248 // >>> appears in_use and we can't just call
249 // >>> dev_kfree_skb.
250 dev_err(xpnet, "bte_copy(0x%p, 0x%p, 0x%hx) returned "
251 "error=0x%x\n", (void *)msg->buf_pa,
252 (void *)__pa((u64)skb->data &
253 ~(L1_CACHE_BYTES - 1)),
254 msg->size, bret);
255
256 xpc_received(partid, channel, (void *) msg);
257
258 priv->stats.rx_errors++;
259
260 return;
261 }
262 }
263
264 dev_dbg(xpnet, "<skb->head=0x%p skb->data=0x%p skb->tail=0x%p "
265 "skb->end=0x%p skb->len=%d\n", (void *) skb->head,
266 (void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb),
267 skb->len);
268
269 skb->protocol = eth_type_trans(skb, xpnet_device);
270 skb->ip_summed = CHECKSUM_UNNECESSARY;
271
272 dev_dbg(xpnet, "passing skb to network layer\n"
273 KERN_DEBUG "\tskb->head=0x%p skb->data=0x%p skb->tail=0x%p "
274 "skb->end=0x%p skb->len=%d\n",
275 (void *)skb->head, (void *)skb->data, skb_tail_pointer(skb),
276 skb_end_pointer(skb), skb->len);
277
278
279 xpnet_device->last_rx = jiffies;
280 priv->stats.rx_packets++;
281 priv->stats.rx_bytes += skb->len + ETH_HLEN;
282
283 netif_rx_ni(skb);
284 xpc_received(partid, channel, (void *) msg);
285 }
286
287
288 /*
289 * This is the handler which XPC calls during any sort of change in
290 * state or message reception on a connection.
291 */
292 static void
293 xpnet_connection_activity(enum xpc_retval reason, partid_t partid, int channel,
294 void *data, void *key)
295 {
296 long bp;
297
298
299 DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
300 DBUG_ON(channel != XPC_NET_CHANNEL);
301
302 switch(reason) {
303 case xpcMsgReceived: /* message received */
304 DBUG_ON(data == NULL);
305
306 xpnet_receive(partid, channel, (struct xpnet_message *) data);
307 break;
308
309 case xpcConnected: /* connection completed to a partition */
310 spin_lock_bh(&xpnet_broadcast_lock);
311 xpnet_broadcast_partitions |= 1UL << (partid -1 );
312 bp = xpnet_broadcast_partitions;
313 spin_unlock_bh(&xpnet_broadcast_lock);
314
315 netif_carrier_on(xpnet_device);
316
317 dev_dbg(xpnet, "%s connection created to partition %d; "
318 "xpnet_broadcast_partitions=0x%lx\n",
319 xpnet_device->name, partid, bp);
320 break;
321
322 default:
323 spin_lock_bh(&xpnet_broadcast_lock);
324 xpnet_broadcast_partitions &= ~(1UL << (partid -1 ));
325 bp = xpnet_broadcast_partitions;
326 spin_unlock_bh(&xpnet_broadcast_lock);
327
328 if (bp == 0) {
329 netif_carrier_off(xpnet_device);
330 }
331
332 dev_dbg(xpnet, "%s disconnected from partition %d; "
333 "xpnet_broadcast_partitions=0x%lx\n",
334 xpnet_device->name, partid, bp);
335 break;
336
337 }
338 }
339
340
341 static int
342 xpnet_dev_open(struct net_device *dev)
343 {
344 enum xpc_retval ret;
345
346
347 dev_dbg(xpnet, "calling xpc_connect(%d, 0x%p, NULL, %ld, %ld, %ld, "
348 "%ld)\n", XPC_NET_CHANNEL, xpnet_connection_activity,
349 XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, XPNET_MAX_KTHREADS,
350 XPNET_MAX_IDLE_KTHREADS);
351
352 ret = xpc_connect(XPC_NET_CHANNEL, xpnet_connection_activity, NULL,
353 XPNET_MSG_SIZE, XPNET_MSG_NENTRIES,
354 XPNET_MAX_KTHREADS, XPNET_MAX_IDLE_KTHREADS);
355 if (ret != xpcSuccess) {
356 dev_err(xpnet, "ifconfig up of %s failed on XPC connect, "
357 "ret=%d\n", dev->name, ret);
358
359 return -ENOMEM;
360 }
361
362 dev_dbg(xpnet, "ifconfig up of %s; XPC connected\n", dev->name);
363
364 return 0;
365 }
366
367
368 static int
369 xpnet_dev_stop(struct net_device *dev)
370 {
371 xpc_disconnect(XPC_NET_CHANNEL);
372
373 dev_dbg(xpnet, "ifconfig down of %s; XPC disconnected\n", dev->name);
374
375 return 0;
376 }
377
378
379 static int
380 xpnet_dev_change_mtu(struct net_device *dev, int new_mtu)
381 {
382 /* 68 comes from min TCP+IP+MAC header */
383 if ((new_mtu < 68) || (new_mtu > XPNET_MAX_MTU)) {
384 dev_err(xpnet, "ifconfig %s mtu %d failed; value must be "
385 "between 68 and %ld\n", dev->name, new_mtu,
386 XPNET_MAX_MTU);
387 return -EINVAL;
388 }
389
390 dev->mtu = new_mtu;
391 dev_dbg(xpnet, "ifconfig %s mtu set to %d\n", dev->name, new_mtu);
392 return 0;
393 }
394
395
396 /*
397 * Required for the net_device structure.
398 */
399 static int
400 xpnet_dev_set_config(struct net_device *dev, struct ifmap *new_map)
401 {
402 return 0;
403 }
404
405
406 /*
407 * Return statistics to the caller.
408 */
409 static struct net_device_stats *
410 xpnet_dev_get_stats(struct net_device *dev)
411 {
412 struct xpnet_dev_private *priv;
413
414
415 priv = (struct xpnet_dev_private *) dev->priv;
416
417 return &priv->stats;
418 }
419
420
421 /*
422 * Notification that the other end has received the message and
423 * DMA'd the skb information. At this point, they are done with
424 * our side. When all recipients are done processing, we
425 * release the skb and then release our pending message structure.
426 */
427 static void
428 xpnet_send_completed(enum xpc_retval reason, partid_t partid, int channel,
429 void *__qm)
430 {
431 struct xpnet_pending_msg *queued_msg =
432 (struct xpnet_pending_msg *) __qm;
433
434
435 DBUG_ON(queued_msg == NULL);
436
437 dev_dbg(xpnet, "message to %d notified with reason %d\n",
438 partid, reason);
439
440 if (atomic_dec_return(&queued_msg->use_count) == 0) {
441 dev_dbg(xpnet, "all acks for skb->head=-x%p\n",
442 (void *) queued_msg->skb->head);
443
444 dev_kfree_skb_any(queued_msg->skb);
445 kfree(queued_msg);
446 }
447 }
448
449
450 /*
451 * Network layer has formatted a packet (skb) and is ready to place it
452 * "on the wire". Prepare and send an xpnet_message to all partitions
453 * which have connected with us and are targets of this packet.
454 *
455 * MAC-NOTE: For the XPNET driver, the MAC address contains the
456 * destination partition_id. If the destination partition id word
457 * is 0xff, this packet is to broadcast to all partitions.
458 */
459 static int
460 xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
461 {
462 struct xpnet_pending_msg *queued_msg;
463 enum xpc_retval ret;
464 struct xpnet_message *msg;
465 u64 start_addr, end_addr;
466 long dp;
467 u8 second_mac_octet;
468 partid_t dest_partid;
469 struct xpnet_dev_private *priv;
470 u16 embedded_bytes;
471
472
473 priv = (struct xpnet_dev_private *) dev->priv;
474
475
476 dev_dbg(xpnet, ">skb->head=0x%p skb->data=0x%p skb->tail=0x%p "
477 "skb->end=0x%p skb->len=%d\n", (void *) skb->head,
478 (void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb),
479 skb->len);
480
481
482 /*
483 * The xpnet_pending_msg tracks how many outstanding
484 * xpc_send_notifies are relying on this skb. When none
485 * remain, release the skb.
486 */
487 queued_msg = kmalloc(sizeof(struct xpnet_pending_msg), GFP_ATOMIC);
488 if (queued_msg == NULL) {
489 dev_warn(xpnet, "failed to kmalloc %ld bytes; dropping "
490 "packet\n", sizeof(struct xpnet_pending_msg));
491
492 priv->stats.tx_errors++;
493
494 return -ENOMEM;
495 }
496
497
498 /* get the beginning of the first cacheline and end of last */
499 start_addr = ((u64) skb->data & ~(L1_CACHE_BYTES - 1));
500 end_addr = L1_CACHE_ALIGN((u64)skb_tail_pointer(skb));
501
502 /* calculate how many bytes to embed in the XPC message */
503 embedded_bytes = 0;
504 if (unlikely(skb->len <= XPNET_MSG_DATA_MAX)) {
505 /* skb->data does fit so embed */
506 embedded_bytes = skb->len;
507 }
508
509
510 /*
511 * Since the send occurs asynchronously, we set the count to one
512 * and begin sending. Any sends that happen to complete before
513 * we are done sending will not free the skb. We will be left
514 * with that task during exit. This also handles the case of
515 * a packet destined for a partition which is no longer up.
516 */
517 atomic_set(&queued_msg->use_count, 1);
518 queued_msg->skb = skb;
519
520
521 second_mac_octet = skb->data[XPNET_PARTID_OCTET];
522 if (second_mac_octet == 0xff) {
523 /* we are being asked to broadcast to all partitions */
524 dp = xpnet_broadcast_partitions;
525 } else if (second_mac_octet != 0) {
526 dp = xpnet_broadcast_partitions &
527 (1UL << (second_mac_octet - 1));
528 } else {
529 /* 0 is an invalid partid. Ignore */
530 dp = 0;
531 }
532 dev_dbg(xpnet, "destination Partitions mask (dp) = 0x%lx\n", dp);
533
534 /*
535 * If we wanted to allow promiscuous mode to work like an
536 * unswitched network, this would be a good point to OR in a
537 * mask of partitions which should be receiving all packets.
538 */
539
540 /*
541 * Main send loop.
542 */
543 for (dest_partid = 1; dp && dest_partid < XP_MAX_PARTITIONS;
544 dest_partid++) {
545
546
547 if (!(dp & (1UL << (dest_partid - 1)))) {
548 /* not destined for this partition */
549 continue;
550 }
551
552 /* remove this partition from the destinations mask */
553 dp &= ~(1UL << (dest_partid - 1));
554
555
556 /* found a partition to send to */
557
558 ret = xpc_allocate(dest_partid, XPC_NET_CHANNEL,
559 XPC_NOWAIT, (void **)&msg);
560 if (unlikely(ret != xpcSuccess)) {
561 continue;
562 }
563
564 msg->embedded_bytes = embedded_bytes;
565 if (unlikely(embedded_bytes != 0)) {
566 msg->version = XPNET_VERSION_EMBED;
567 dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n",
568 &msg->data, skb->data, (size_t) embedded_bytes);
569 skb_copy_from_linear_data(skb, &msg->data,
570 (size_t)embedded_bytes);
571 } else {
572 msg->version = XPNET_VERSION;
573 }
574 msg->magic = XPNET_MAGIC;
575 msg->size = end_addr - start_addr;
576 msg->leadin_ignore = (u64) skb->data - start_addr;
577 msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb);
578 msg->buf_pa = __pa(start_addr);
579
580 dev_dbg(xpnet, "sending XPC message to %d:%d\n"
581 KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, "
582 "msg->leadin_ignore=%u, msg->tailout_ignore=%u\n",
583 dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size,
584 msg->leadin_ignore, msg->tailout_ignore);
585
586
587 atomic_inc(&queued_msg->use_count);
588
589 ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, msg,
590 xpnet_send_completed, queued_msg);
591 if (unlikely(ret != xpcSuccess)) {
592 atomic_dec(&queued_msg->use_count);
593 continue;
594 }
595
596 }
597
598 if (atomic_dec_return(&queued_msg->use_count) == 0) {
599 dev_dbg(xpnet, "no partitions to receive packet destined for "
600 "%d\n", dest_partid);
601
602
603 dev_kfree_skb(skb);
604 kfree(queued_msg);
605 }
606
607 priv->stats.tx_packets++;
608 priv->stats.tx_bytes += skb->len;
609
610 return 0;
611 }
612
613
614 /*
615 * Deal with transmit timeouts coming from the network layer.
616 */
617 static void
618 xpnet_dev_tx_timeout (struct net_device *dev)
619 {
620 struct xpnet_dev_private *priv;
621
622
623 priv = (struct xpnet_dev_private *) dev->priv;
624
625 priv->stats.tx_errors++;
626 return;
627 }
628
629
630 static int __init
631 xpnet_init(void)
632 {
633 int i;
634 u32 license_num;
635 int result = -ENOMEM;
636
637
638 if (!ia64_platform_is("sn2")) {
639 return -ENODEV;
640 }
641
642 dev_info(xpnet, "registering network device %s\n", XPNET_DEVICE_NAME);
643
644 /*
645 * use ether_setup() to init the majority of our device
646 * structure and then override the necessary pieces.
647 */
648 xpnet_device = alloc_netdev(sizeof(struct xpnet_dev_private),
649 XPNET_DEVICE_NAME, ether_setup);
650 if (xpnet_device == NULL) {
651 return -ENOMEM;
652 }
653
654 netif_carrier_off(xpnet_device);
655
656 xpnet_device->mtu = XPNET_DEF_MTU;
657 xpnet_device->change_mtu = xpnet_dev_change_mtu;
658 xpnet_device->open = xpnet_dev_open;
659 xpnet_device->get_stats = xpnet_dev_get_stats;
660 xpnet_device->stop = xpnet_dev_stop;
661 xpnet_device->hard_start_xmit = xpnet_dev_hard_start_xmit;
662 xpnet_device->tx_timeout = xpnet_dev_tx_timeout;
663 xpnet_device->set_config = xpnet_dev_set_config;
664
665 /*
666 * Multicast assumes the LSB of the first octet is set for multicast
667 * MAC addresses. We chose the first octet of the MAC to be unlikely
668 * to collide with any vendor's officially issued MAC.
669 */
670 xpnet_device->dev_addr[0] = 0xfe;
671 xpnet_device->dev_addr[XPNET_PARTID_OCTET] = sn_partition_id;
672 license_num = sn_partition_serial_number_val();
673 for (i = 3; i >= 0; i--) {
674 xpnet_device->dev_addr[XPNET_LICENSE_OCTET + i] =
675 license_num & 0xff;
676 license_num = license_num >> 8;
677 }
678
679 /*
680 * ether_setup() sets this to a multicast device. We are
681 * really not supporting multicast at this time.
682 */
683 xpnet_device->flags &= ~IFF_MULTICAST;
684
685 /*
686 * No need to checksum as it is a DMA transfer. The BTE will
687 * report an error if the data is not retrievable and the
688 * packet will be dropped.
689 */
690 xpnet_device->features = NETIF_F_NO_CSUM;
691
692 result = register_netdev(xpnet_device);
693 if (result != 0) {
694 free_netdev(xpnet_device);
695 }
696
697 return result;
698 }
699 module_init(xpnet_init);
700
701
702 static void __exit
703 xpnet_exit(void)
704 {
705 dev_info(xpnet, "unregistering network device %s\n",
706 xpnet_device[0].name);
707
708 unregister_netdev(xpnet_device);
709
710 free_netdev(xpnet_device);
711 }
712 module_exit(xpnet_exit);
713
714
715 MODULE_AUTHOR("Silicon Graphics, Inc.");
716 MODULE_DESCRIPTION("Cross Partition Network adapter (XPNET)");
717 MODULE_LICENSE("GPL");
718
This page took 0.055489 seconds and 5 git commands to generate.