arch/m68k/Kconfig.devices

   1 if MMU
   2
   3 config ARCH_MAY_HAVE_PC_FDC
   4         bool
   5         depends on BROKEN && (Q40 || SUN3X)
   6         default y
   7
   8 menu "Platform devices"
   9
  10 config HEARTBEAT
  11         bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || Q40
  12         default y if !AMIGA && !APOLLO && !ATARI && !Q40 && HP300
  13         help
  14           Use the power-on LED on your machine as a load meter.  The exact
  15           behavior is platform-dependent, but normally the flash frequency is
  16           a hyperbolic function of the 5-minute load average.
  17
  18 # We have a dedicated heartbeat LED. :-)
  19 config PROC_HARDWARE
  20         bool "/proc/hardware support"
  21         help
  22           Say Y here to support the /proc/hardware file, which gives you
  23           access to information about the machine you're running on,
  24           including the model, CPU, MMU, clock speed, BogoMIPS rating,
  25           and memory size.
  26
  27 config NATFEAT
  28         bool "ARAnyM emulator support"
  29         depends on ATARI
  30         help
  31           This option enables support for ARAnyM native features, such as
  32           access to a disk image as /dev/hda.
  33
  34 config NFBLOCK
  35         tristate "NatFeat block device support"
  36         depends on BLOCK && NATFEAT
  37         help
  38           Say Y to include support for the ARAnyM NatFeat block device
  39           which allows direct access to the hard drives without using
  40           the hardware emulation.
  41
  42 config NFCON
  43         tristate "NatFeat console driver"
  44         depends on NATFEAT
  45         help
  46           Say Y to include support for the ARAnyM NatFeat console driver
  47           which allows the console output to be redirected to the stderr
  48           output of ARAnyM.
  49
  50 config NFETH
  51         tristate "NatFeat Ethernet support"
  52         depends on ETHERNET && NATFEAT
  53         help
  54           Say Y to include support for the ARAnyM NatFeat network device
  55           which will emulate a regular ethernet device while presenting an
  56           ethertap device to the host system.
  57
  58 endmenu
  59
  60 menu "Character devices"
  61
  62 config ATARI_DSP56K
  63         tristate "Atari DSP56k support (EXPERIMENTAL)"
  64         depends on ATARI && EXPERIMENTAL
  65         help
  66           If you want to be able to use the DSP56001 in Falcons, say Y. This
  67           driver is still experimental, and if you don't know what it is, or
  68           if you don't have this processor, just say N.
  69
  70           To compile this driver as a module, choose M here.
  71
  72 config AMIGA_BUILTIN_SERIAL
  73         tristate "Amiga builtin serial support"
  74         depends on AMIGA
  75         help
  76           If you want to use your Amiga's built-in serial port in Linux,
  77           answer Y.
  78
  79           To compile this driver as a module, choose M here.
  80
  81 config HPDCA
  82         tristate "HP DCA serial support"
  83         depends on DIO && SERIAL_8250
  84         help
  85           If you want to use the internal "DCA" serial ports on an HP300
  86           machine, say Y here.
  87
  88 config HPAPCI
  89         tristate "HP APCI serial support"
  90         depends on HP300 && SERIAL_8250 && EXPERIMENTAL
  91         help
  92           If you want to use the internal "APCI" serial ports on an HP400
  93           machine, say Y here.
  94
  95 config SERIAL_CONSOLE
  96         bool "Support for serial port console"
  97         depends on AMIGA_BUILTIN_SERIAL=y
  98         ---help---
  99           If you say Y here, it will be possible to use a serial port as the
 100           system console (the system console is the device which receives all
 101           kernel messages and warnings and which allows logins in single user
 102           mode). This could be useful if some terminal or printer is connected
 103           to that serial port.
 104
 105           Even if you say Y here, the currently visible virtual console
 106           (/dev/tty0) will still be used as the system console by default, but
 107           you can alter that using a kernel command line option such as
 108           "console=ttyS1". (Try "man bootparam" or see the documentation of
 109           your boot loader about how to pass options to the kernel at boot
 110           time.)
 111
 112           If you don't have a graphical console and you say Y here, the
 113           kernel will automatically use the first serial line, /dev/ttyS0, as
 114           system console.
 115
 116           If unsure, say N.
 117
 118 endmenu
 119
 120 endif