arch/m68k/coldfire/intc-simr.c

   1 /*
   2  * intc-simr.c
   3  *
   4  * Interrupt controller code for the ColdFire 5208, 5207 & 532x parts.
   5  *
   6  * (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com>
   7  *
   8  * This file is subject to the terms and conditions of the GNU General Public
   9  * License.  See the file COPYING in the main directory of this archive
  10  * for more details.
  11  */
  12
  13 #include <linux/types.h>
  14 #include <linux/init.h>
  15 #include <linux/kernel.h>
  16 #include <linux/interrupt.h>
  17 #include <linux/irq.h>
  18 #include <linux/io.h>
  19 #include <asm/coldfire.h>
  20 #include <asm/mcfsim.h>
  21 #include <asm/traps.h>
  22
  23 /*
  24  *      The EDGE Port interrupts are the fixed 7 external interrupts.
  25  *      They need some special treatment, for example they need to be acked.
  26  */
  27 #ifdef CONFIG_M520x
  28 /*
  29  *      The 520x parts only support a limited range of these external
  30  *      interrupts, only 1, 4 and 7 (as interrupts 65, 66 and 67).
  31  */
  32 #define EINT0   64      /* Is not actually used, but spot reserved for it */
  33 #define EINT1   65      /* EDGE Port interrupt 1 */
  34 #define EINT4   66      /* EDGE Port interrupt 4 */
  35 #define EINT7   67      /* EDGE Port interrupt 7 */
  36
  37 static unsigned int irqebitmap[] = { 0, 1, 4, 7 };
  38 static unsigned int inline irq2ebit(unsigned int irq)
  39 {
  40         return irqebitmap[irq - EINT0];
  41 }
  42
  43 #else
  44
  45 /*
  46  *      Most of the ColdFire parts with the EDGE Port module just have
  47  *      a strait direct mapping of the 7 external interrupts. Although
  48  *      there is a bit reserved for 0, it is not used.
  49  */
  50 #define EINT0   64      /* Is not actually used, but spot reserved for it */
  51 #define EINT1   65      /* EDGE Port interrupt 1 */
  52 #define EINT7   71      /* EDGE Port interrupt 7 */
  53
  54 static unsigned int inline irq2ebit(unsigned int irq)
  55 {
  56         return irq - EINT0;
  57 }
  58
  59 #endif
  60
  61 /*
  62  *      There maybe one, two or three interrupt control units, each has 64
  63  *      interrupts. If there is no second or third unit then MCFINTC1_* or
  64  *      MCFINTC2_* defines will be 0 (and code for them optimized away).
  65  */
  66
  67 static void intc_irq_mask(struct irq_data *d)
  68 {
  69         unsigned int irq = d->irq - MCFINT_VECBASE;
  70
  71         if (MCFINTC2_SIMR && (irq > 128))
  72                 __raw_writeb(irq - 128, MCFINTC2_SIMR);
  73         else if (MCFINTC1_SIMR && (irq > 64))
  74                 __raw_writeb(irq - 64, MCFINTC1_SIMR);
  75         else
  76                 __raw_writeb(irq, MCFINTC0_SIMR);
  77 }
  78
  79 static void intc_irq_unmask(struct irq_data *d)
  80 {
  81         unsigned int irq = d->irq - MCFINT_VECBASE;
  82
  83         if (MCFINTC2_CIMR && (irq > 128))
  84                 __raw_writeb(irq - 128, MCFINTC2_CIMR);
  85         else if (MCFINTC1_CIMR && (irq > 64))
  86                 __raw_writeb(irq - 64, MCFINTC1_CIMR);
  87         else
  88                 __raw_writeb(irq, MCFINTC0_CIMR);
  89 }
  90
  91 static void intc_irq_ack(struct irq_data *d)
  92 {
  93         unsigned int ebit = irq2ebit(d->irq);
  94
  95         __raw_writeb(0x1 << ebit, MCFEPORT_EPFR);
  96 }
  97
  98 static unsigned int intc_irq_startup(struct irq_data *d)
  99 {
 100         unsigned int irq = d->irq;
 101
 102         if ((irq >= EINT1) && (irq <= EINT7)) {
 103                 unsigned int ebit = irq2ebit(irq);
 104                 u8 v;
 105
 106 #if defined(MCFEPORT_EPDDR)
 107                 /* Set EPORT line as input */
 108                 v = __raw_readb(MCFEPORT_EPDDR);
 109                 __raw_writeb(v & ~(0x1 << ebit), MCFEPORT_EPDDR);
 110 #endif
 111
 112                 /* Set EPORT line as interrupt source */
 113                 v = __raw_readb(MCFEPORT_EPIER);
 114                 __raw_writeb(v | (0x1 << ebit), MCFEPORT_EPIER);
 115         }
 116
 117         irq -= MCFINT_VECBASE;
 118         if (MCFINTC2_ICR0 && (irq > 128))
 119                 __raw_writeb(5, MCFINTC2_ICR0 + irq - 128);
 120         else if (MCFINTC1_ICR0 && (irq > 64))
 121                 __raw_writeb(5, MCFINTC1_ICR0 + irq - 64);
 122         else
 123                 __raw_writeb(5, MCFINTC0_ICR0 + irq);
 124
 125         intc_irq_unmask(d);
 126         return 0;
 127 }
 128
 129 static int intc_irq_set_type(struct irq_data *d, unsigned int type)
 130 {
 131         unsigned int ebit, irq = d->irq;
 132         u16 pa, tb;
 133
 134         switch (type) {
 135         case IRQ_TYPE_EDGE_RISING:
 136                 tb = 0x1;
 137                 break;
 138         case IRQ_TYPE_EDGE_FALLING:
 139                 tb = 0x2;
 140                 break;
 141         case IRQ_TYPE_EDGE_BOTH:
 142                 tb = 0x3;
 143                 break;
 144         default:
 145                 /* Level triggered */
 146                 tb = 0;
 147                 break;
 148         }
 149
 150         if (tb)
 151                 irq_set_handler(irq, handle_edge_irq);
 152
 153         ebit = irq2ebit(irq) * 2;
 154         pa = __raw_readw(MCFEPORT_EPPAR);
 155         pa = (pa & ~(0x3 << ebit)) | (tb << ebit);
 156         __raw_writew(pa, MCFEPORT_EPPAR);
 157
 158         return 0;
 159 }
 160
 161 static struct irq_chip intc_irq_chip = {
 162         .name           = "CF-INTC",
 163         .irq_startup    = intc_irq_startup,
 164         .irq_mask       = intc_irq_mask,
 165         .irq_unmask     = intc_irq_unmask,
 166 };
 167
 168 static struct irq_chip intc_irq_chip_edge_port = {
 169         .name           = "CF-INTC-EP",
 170         .irq_startup    = intc_irq_startup,
 171         .irq_mask       = intc_irq_mask,
 172         .irq_unmask     = intc_irq_unmask,
 173         .irq_ack        = intc_irq_ack,
 174         .irq_set_type   = intc_irq_set_type,
 175 };
 176
 177 void __init init_IRQ(void)
 178 {
 179         int irq, eirq;
 180
 181         /* Mask all interrupt sources */
 182         __raw_writeb(0xff, MCFINTC0_SIMR);
 183         if (MCFINTC1_SIMR)
 184                 __raw_writeb(0xff, MCFINTC1_SIMR);
 185         if (MCFINTC2_SIMR)
 186                 __raw_writeb(0xff, MCFINTC2_SIMR);
 187
 188         eirq = MCFINT_VECBASE + 64 + (MCFINTC1_ICR0 ? 64 : 0) +
 189                                                 (MCFINTC2_ICR0 ? 64 : 0);
 190         for (irq = MCFINT_VECBASE; (irq < eirq); irq++) {
 191                 if ((irq >= EINT1) && (irq <= EINT7))
 192                         irq_set_chip(irq, &intc_irq_chip_edge_port);
 193                 else
 194                         irq_set_chip(irq, &intc_irq_chip);
 195                 irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
 196                 irq_set_handler(irq, handle_level_irq);
 197         }
 198 }
 199