cd952b0a8bd32d81db35ef6382b9baa0af2bf410
[deliverable/linux.git] / arch / m68k / include / asm / m53xxacr.h
1 /****************************************************************************/
2
3 /*
4 * m53xxacr.h -- ColdFire version 3 core cache support
5 *
6 * (C) Copyright 2010, Greg Ungerer <gerg@snapgear.com>
7 */
8
9 /****************************************************************************/
10 #ifndef m53xxacr_h
11 #define m53xxacr_h
12 /****************************************************************************/
13
14 /*
15 * All varients of the ColdFire using version 3 cores have a similar
16 * cache setup. They have a unified instruction and data cache, with
17 * configurable write-through or copy-back operation.
18 */
19
20 /*
21 * Define the Cache Control register flags.
22 */
23 #define CACR_EC 0x80000000 /* Enable cache */
24 #define CACR_ESB 0x20000000 /* Enable store buffer */
25 #define CACR_DPI 0x10000000 /* Disable invalidation by CPUSHL */
26 #define CACR_HLCK 0x08000000 /* Half cache lock mode */
27 #define CACR_CINVA 0x01000000 /* Invalidate cache */
28 #define CACR_DNFB 0x00000400 /* Inhibited fill buffer */
29 #define CACR_DCM_WT 0x00000000 /* Cacheable write-through */
30 #define CACR_DCM_CB 0x00000100 /* Cacheable copy-back */
31 #define CACR_DCM_PRE 0x00000200 /* Cache inhibited, precise */
32 #define CACR_DCM_IMPRE 0x00000300 /* Cache inhibited, imprecise */
33 #define CACR_WPROTECT 0x00000020 /* Write protect*/
34 #define CACR_EUSP 0x00000010 /* Eanble separate user a7 */
35
36 /*
37 * Define the Access Control register flags.
38 */
39 #define ACR_BASE_POS 24 /* Address Base (upper 8 bits) */
40 #define ACR_MASK_POS 16 /* Address Mask (next 8 bits) */
41 #define ACR_ENABLE 0x00008000 /* Enable this ACR */
42 #define ACR_USER 0x00000000 /* Allow only user accesses */
43 #define ACR_SUPER 0x00002000 /* Allow supervisor access only */
44 #define ACR_ANY 0x00004000 /* Allow any access type */
45 #define ACR_CM_WT 0x00000000 /* Cacheable, write-through */
46 #define ACR_CM_CB 0x00000020 /* Cacheable, copy-back */
47 #define ACR_CM_PRE 0x00000040 /* Cache inhibited, precise */
48 #define ACR_CM_IMPRE 0x00000060 /* Cache inhibited, imprecise */
49 #define ACR_WPROTECT 0x00000004 /* Write protect region */
50
51 /*
52 * Define the cache type and arrangement (needed for pushes).
53 */
54 #if defined(CONFIG_M5307)
55 #define CACHE_SIZE 0x2000 /* 8k of unified cache */
56 #define ICACHE_SIZE CACHE_SIZE
57 #define DCACHE_SIZE CACHE_SIZE
58 #elif defined(CONFIG_M532x)
59 #define CACHE_SIZE 0x4000 /* 32k of unified cache */
60 #define ICACHE_SIZE CACHE_SIZE
61 #define DCACHE_SIZE CACHE_SIZE
62 #endif
63
64 #define CACHE_LINE_SIZE 16 /* 16 byte line size */
65 #define CACHE_WAYS 4 /* 4 ways - set associative */
66
67 /*
68 * Set the cache controller settings we will use. This default in the
69 * CACR is cache inhibited, we use the ACR register to set cacheing
70 * enabled on the regions we want (eg RAM).
71 */
72 #if defined(CONFIG_CACHE_COPYBACK)
73 #define CACHE_TYPE ACR_CM_CB
74 #define CACHE_PUSH
75 #else
76 #define CACHE_TYPE ACR_CM_WT
77 #endif
78
79 #ifdef CONFIG_COLDFIRE_SW_A7
80 #define CACHE_MODE (CACR_EC + CACR_ESB + CACR_DCM_PRE)
81 #else
82 #define CACHE_MODE (CACR_EC + CACR_ESB + CACR_DCM_PRE + CACR_EUSP)
83 #endif
84
85 /*
86 * Unified cache means we will never need to flush for coherency of
87 * instruction fetch. We will need to flush to maintain memory/DMA
88 * coherency though in all cases. And for copyback caches we will need
89 * to push cached data as well.
90 */
91 #define CACHE_INIT CACR_CINVA
92 #define CACHE_INVALIDATE CACR_CINVA
93 #define CACHE_INVALIDATED CACR_CINVA
94
95 #define ACR0_MODE ((CONFIG_RAMBASE & 0xff000000) + \
96 (0x000f0000) + \
97 (ACR_ENABLE + ACR_ANY + CACHE_TYPE))
98 #define ACR1_MODE 0
99
100 /****************************************************************************/
101 #endif /* m53xxsim_h */
This page took 0.060206 seconds and 4 git commands to generate.