projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge branch 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
[deliverable/linux.git] / arch / mips / include / asm / io.h
1 /*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Copyright (C) 1994, 1995 Waldorf GmbH
7 * Copyright (C) 1994 - 2000, 06 Ralf Baechle
8 * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
9 * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
10 * Author: Maciej W. Rozycki <macro@mips.com>
11 */
12 #ifndef _ASM_IO_H
13 #define _ASM_IO_H
14
15 #include <linux/compiler.h>
16 #include <linux/kernel.h>
17 #include <linux/types.h>
18
19 #include <asm/addrspace.h>
20 #include <asm/bug.h>
21 #include <asm/byteorder.h>
22 #include <asm/cpu.h>
23 #include <asm/cpu-features.h>
24 #include <asm-generic/iomap.h>
25 #include <asm/page.h>
26 #include <asm/pgtable-bits.h>
27 #include <asm/processor.h>
28 #include <asm/string.h>
29
30 #include <ioremap.h>
31 #include <mangle-port.h>
32
33 /*
34 * Slowdown I/O port space accesses for antique hardware.
35 */
36 #undef CONF_SLOWDOWN_IO
37
38 /*
39 * Raw operations are never swapped in software. OTOH values that raw
40 * operations are working on may or may not have been swapped by the bus
41 * hardware. An example use would be for flash memory that's used for
42 * execute in place.
43 */
44 # define __raw_ioswabb(a, x) (x)
45 # define __raw_ioswabw(a, x) (x)
46 # define __raw_ioswabl(a, x) (x)
47 # define __raw_ioswabq(a, x) (x)
48 # define ____raw_ioswabq(a, x) (x)
49
50 /* ioswab[bwlq], __mem_ioswab[bwlq] are defined in mangle-port.h */
51
52 #define IO_SPACE_LIMIT 0xffff
53
54 /*
55 * On MIPS I/O ports are memory mapped, so we access them using normal
56 * load/store instructions. mips_io_port_base is the virtual address to
57 * which all ports are being mapped. For sake of efficiency some code
58 * assumes that this is an address that can be loaded with a single lui
59 * instruction, so the lower 16 bits must be zero. Should be true on
60 * on any sane architecture; generic code does not use this assumption.
61 */
62 extern const unsigned long mips_io_port_base;
63
64 /*
65 * Gcc will generate code to load the value of mips_io_port_base after each
66 * function call which may be fairly wasteful in some cases. So we don't
67 * play quite by the book. We tell gcc mips_io_port_base is a long variable
68 * which solves the code generation issue. Now we need to violate the
69 * aliasing rules a little to make initialization possible and finally we
70 * will need the barrier() to fight side effects of the aliasing chat.
71 * This trickery will eventually collapse under gcc's optimizer. Oh well.
72 */
73 static inline void set_io_port_base(unsigned long base)
74 {
75 * (unsigned long *) &mips_io_port_base = base;
76 barrier();
77 }
78
79 /*
80 * Thanks to James van Artsdalen for a better timing-fix than
81 * the two short jumps: using outb's to a nonexistent port seems
82 * to guarantee better timings even on fast machines.
83 *
84 * On the other hand, I'd like to be sure of a non-existent port:
85 * I feel a bit unsafe about using 0x80 (should be safe, though)
86 *
87 * Linus
88 *
89 */
90
91 #define __SLOW_DOWN_IO \
92 __asm__ __volatile__( \
93 "sb\t$0,0x80(%0)" \
94 : : "r" (mips_io_port_base));
95
96 #ifdef CONF_SLOWDOWN_IO
97 #ifdef REALLY_SLOW_IO
98 #define SLOW_DOWN_IO { __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; }
99 #else
100 #define SLOW_DOWN_IO __SLOW_DOWN_IO
101 #endif
102 #else
103 #define SLOW_DOWN_IO
104 #endif
105
106 /*
107 * virt_to_phys - map virtual addresses to physical
108 * @address: address to remap
109 *
110 * The returned physical address is the physical (CPU) mapping for
111 * the memory address given. It is only valid to use this function on
112 * addresses directly mapped or allocated via kmalloc.
113 *
114 * This function does not give bus mappings for DMA transfers. In
115 * almost all conceivable cases a device driver should not be using
116 * this function
117 */
118 static inline unsigned long virt_to_phys(volatile const void *address)
119 {
120 return (unsigned long)address - PAGE_OFFSET + PHYS_OFFSET;
121 }
122
123 /*
124 * phys_to_virt - map physical address to virtual
125 * @address: address to remap
126 *
127 * The returned virtual address is a current CPU mapping for
128 * the memory address given. It is only valid to use this function on
129 * addresses that have a kernel mapping
130 *
131 * This function does not handle bus mappings for DMA transfers. In
132 * almost all conceivable cases a device driver should not be using
133 * this function
134 */
135 static inline void * phys_to_virt(unsigned long address)
136 {
137 return (void *)(address + PAGE_OFFSET - PHYS_OFFSET);
138 }
139
140 /*
141 * ISA I/O bus memory addresses are 1:1 with the physical address.
142 */
143 static inline unsigned long isa_virt_to_bus(volatile void * address)
144 {
145 return (unsigned long)address - PAGE_OFFSET;
146 }
147
148 static inline void * isa_bus_to_virt(unsigned long address)
149 {
150 return (void *)(address + PAGE_OFFSET);
151 }
152
153 #define isa_page_to_bus page_to_phys
154
155 /*
156 * However PCI ones are not necessarily 1:1 and therefore these interfaces
157 * are forbidden in portable PCI drivers.
158 *
159 * Allow them for x86 for legacy drivers, though.
160 */
161 #define virt_to_bus virt_to_phys
162 #define bus_to_virt phys_to_virt
163
164 /*
165 * Change "struct page" to physical address.
166 */
167 #define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
168
169 extern void __iomem * __ioremap(phys_t offset, phys_t size, unsigned long flags);
170 extern void __iounmap(const volatile void __iomem *addr);
171
172 static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size,
173 unsigned long flags)
174 {
175 void __iomem *addr = plat_ioremap(offset, size, flags);
176
177 if (addr)
178 return addr;
179
180 #define __IS_LOW512(addr) (!((phys_t)(addr) & (phys_t) ~0x1fffffffULL))
181
182 if (cpu_has_64bit_addresses) {
183 u64 base = UNCAC_BASE;
184
185 /*
186 * R10000 supports a 2 bit uncached attribute therefore
187 * UNCAC_BASE may not equal IO_BASE.
188 */
189 if (flags == _CACHE_UNCACHED)
190 base = (u64) IO_BASE;
191 return (void __iomem *) (unsigned long) (base + offset);
192 } else if (__builtin_constant_p(offset) &&
193 __builtin_constant_p(size) && __builtin_constant_p(flags)) {
194 phys_t phys_addr, last_addr;
195
196 phys_addr = fixup_bigphys_addr(offset, size);
197
198 /* Don't allow wraparound or zero size. */
199 last_addr = phys_addr + size - 1;
200 if (!size || last_addr < phys_addr)
201 return NULL;
202
203 /*
204 * Map uncached objects in the low 512MB of address
205 * space using KSEG1.
206 */
207 if (__IS_LOW512(phys_addr) && __IS_LOW512(last_addr) &&
208 flags == _CACHE_UNCACHED)
209 return (void __iomem *)
210 (unsigned long)CKSEG1ADDR(phys_addr);
211 }
212
213 return __ioremap(offset, size, flags);
214
215 #undef __IS_LOW512
216 }
217
218 /*
219 * ioremap - map bus memory into CPU space
220 * @offset: bus address of the memory
221 * @size: size of the resource to map
222 *
223 * ioremap performs a platform specific sequence of operations to
224 * make bus memory CPU accessible via the readb/readw/readl/writeb/
225 * writew/writel functions and the other mmio helpers. The returned
226 * address is not guaranteed to be usable directly as a virtual
227 * address.
228 */
229 #define ioremap(offset, size) \
230 __ioremap_mode((offset), (size), _CACHE_UNCACHED)
231
232 /*
233 * ioremap_nocache - map bus memory into CPU space
234 * @offset: bus address of the memory
235 * @size: size of the resource to map
236 *
237 * ioremap_nocache performs a platform specific sequence of operations to
238 * make bus memory CPU accessible via the readb/readw/readl/writeb/
239 * writew/writel functions and the other mmio helpers. The returned
240 * address is not guaranteed to be usable directly as a virtual
241 * address.
242 *
243 * This version of ioremap ensures that the memory is marked uncachable
244 * on the CPU as well as honouring existing caching rules from things like
245 * the PCI bus. Note that there are other caches and buffers on many
246 * busses. In particular driver authors should read up on PCI writes
247 *
248 * It's useful if some control registers are in such an area and
249 * write combining or read caching is not desirable:
250 */
251 #define ioremap_nocache(offset, size) \
252 __ioremap_mode((offset), (size), _CACHE_UNCACHED)
253
254 /*
255 * ioremap_cachable - map bus memory into CPU space
256 * @offset: bus address of the memory
257 * @size: size of the resource to map
258 *
259 * ioremap_nocache performs a platform specific sequence of operations to
260 * make bus memory CPU accessible via the readb/readw/readl/writeb/
261 * writew/writel functions and the other mmio helpers. The returned
262 * address is not guaranteed to be usable directly as a virtual
263 * address.
264 *
265 * This version of ioremap ensures that the memory is marked cachable by
266 * the CPU. Also enables full write-combining. Useful for some
267 * memory-like regions on I/O busses.
268 */
269 #define ioremap_cachable(offset, size) \
270 __ioremap_mode((offset), (size), _page_cachable_default)
271
272 /*
273 * These two are MIPS specific ioremap variant. ioremap_cacheable_cow
274 * requests a cachable mapping, ioremap_uncached_accelerated requests a
275 * mapping using the uncached accelerated mode which isn't supported on
276 * all processors.
277 */
278 #define ioremap_cacheable_cow(offset, size) \
279 __ioremap_mode((offset), (size), _CACHE_CACHABLE_COW)
280 #define ioremap_uncached_accelerated(offset, size) \
281 __ioremap_mode((offset), (size), _CACHE_UNCACHED_ACCELERATED)
282
283 static inline void iounmap(const volatile void __iomem *addr)
284 {
285 if (plat_iounmap(addr))
286 return;
287
288 #define __IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1)
289
290 if (cpu_has_64bit_addresses ||
291 (__builtin_constant_p(addr) && __IS_KSEG1(addr)))
292 return;
293
294 __iounmap(addr);
295
296 #undef __IS_KSEG1
297 }
298
299 #ifdef CONFIG_CPU_CAVIUM_OCTEON
300 #define war_octeon_io_reorder_wmb() wmb()
301 #else
302 #define war_octeon_io_reorder_wmb() do { } while (0)
303 #endif
304
305 #define __BUILD_MEMORY_SINGLE(pfx, bwlq, type, irq) \
306 \
307 static inline void pfx##write##bwlq(type val, \
308 volatile void __iomem *mem) \
309 { \
310 volatile type *__mem; \
311 type __val; \
312 \
313 war_octeon_io_reorder_wmb(); \
314 \
315 __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \
316 \
317 __val = pfx##ioswab##bwlq(__mem, val); \
318 \
319 if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \
320 *__mem = __val; \
321 else if (cpu_has_64bits) { \
322 unsigned long __flags; \
323 type __tmp; \
324 \
325 if (irq) \
326 local_irq_save(__flags); \
327 __asm__ __volatile__( \
328 ".set mips3" "\t\t# __writeq""\n\t" \
329 "dsll32 %L0, %L0, 0" "\n\t" \
330 "dsrl32 %L0, %L0, 0" "\n\t" \
331 "dsll32 %M0, %M0, 0" "\n\t" \
332 "or %L0, %L0, %M0" "\n\t" \
333 "sd %L0, %2" "\n\t" \
334 ".set mips0" "\n" \
335 : "=r" (__tmp) \
336 : "0" (__val), "m" (*__mem)); \
337 if (irq) \
338 local_irq_restore(__flags); \
339 } else \
340 BUG(); \
341 } \
342 \
343 static inline type pfx##read##bwlq(const volatile void __iomem *mem) \
344 { \
345 volatile type *__mem; \
346 type __val; \
347 \
348 __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \
349 \
350 if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \
351 __val = *__mem; \
352 else if (cpu_has_64bits) { \
353 unsigned long __flags; \
354 \
355 if (irq) \
356 local_irq_save(__flags); \
357 __asm__ __volatile__( \
358 ".set mips3" "\t\t# __readq" "\n\t" \
359 "ld %L0, %1" "\n\t" \
360 "dsra32 %M0, %L0, 0" "\n\t" \
361 "sll %L0, %L0, 0" "\n\t" \
362 ".set mips0" "\n" \
363 : "=r" (__val) \
364 : "m" (*__mem)); \
365 if (irq) \
366 local_irq_restore(__flags); \
367 } else { \
368 __val = 0; \
369 BUG(); \
370 } \
371 \
372 return pfx##ioswab##bwlq(__mem, __val); \
373 }
374
375 #define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, p, slow) \
376 \
377 static inline void pfx##out##bwlq##p(type val, unsigned long port) \
378 { \
379 volatile type *__addr; \
380 type __val; \
381 \
382 war_octeon_io_reorder_wmb(); \
383 \
384 __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \
385 \
386 __val = pfx##ioswab##bwlq(__addr, val); \
387 \
388 /* Really, we want this to be atomic */ \
389 BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
390 \
391 *__addr = __val; \
392 slow; \
393 } \
394 \
395 static inline type pfx##in##bwlq##p(unsigned long port) \
396 { \
397 volatile type *__addr; \
398 type __val; \
399 \
400 __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \
401 \
402 BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
403 \
404 __val = *__addr; \
405 slow; \
406 \
407 return pfx##ioswab##bwlq(__addr, __val); \
408 }
409
410 #define __BUILD_MEMORY_PFX(bus, bwlq, type) \
411 \
412 __BUILD_MEMORY_SINGLE(bus, bwlq, type, 1)
413
414 #define BUILDIO_MEM(bwlq, type) \
415 \
416 __BUILD_MEMORY_PFX(__raw_, bwlq, type) \
417 __BUILD_MEMORY_PFX(, bwlq, type) \
418 __BUILD_MEMORY_PFX(__mem_, bwlq, type) \
419
420 BUILDIO_MEM(b, u8)
421 BUILDIO_MEM(w, u16)
422 BUILDIO_MEM(l, u32)
423 BUILDIO_MEM(q, u64)
424
425 #define __BUILD_IOPORT_PFX(bus, bwlq, type) \
426 __BUILD_IOPORT_SINGLE(bus, bwlq, type, ,) \
427 __BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO)
428
429 #define BUILDIO_IOPORT(bwlq, type) \
430 __BUILD_IOPORT_PFX(, bwlq, type) \
431 __BUILD_IOPORT_PFX(__mem_, bwlq, type)
432
433 BUILDIO_IOPORT(b, u8)
434 BUILDIO_IOPORT(w, u16)
435 BUILDIO_IOPORT(l, u32)
436 #ifdef CONFIG_64BIT
437 BUILDIO_IOPORT(q, u64)
438 #endif
439
440 #define __BUILDIO(bwlq, type) \
441 \
442 __BUILD_MEMORY_SINGLE(____raw_, bwlq, type, 0)
443
444 __BUILDIO(q, u64)
445
446 #define readb_relaxed readb
447 #define readw_relaxed readw
448 #define readl_relaxed readl
449 #define readq_relaxed readq
450
451 #define readb_be(addr) \
452 __raw_readb((__force unsigned *)(addr))
453 #define readw_be(addr) \
454 be16_to_cpu(__raw_readw((__force unsigned *)(addr)))
455 #define readl_be(addr) \
456 be32_to_cpu(__raw_readl((__force unsigned *)(addr)))
457 #define readq_be(addr) \
458 be64_to_cpu(__raw_readq((__force unsigned *)(addr)))
459
460 #define writeb_be(val, addr) \
461 __raw_writeb((val), (__force unsigned *)(addr))
462 #define writew_be(val, addr) \
463 __raw_writew(cpu_to_be16((val)), (__force unsigned *)(addr))
464 #define writel_be(val, addr) \
465 __raw_writel(cpu_to_be32((val)), (__force unsigned *)(addr))
466 #define writeq_be(val, addr) \
467 __raw_writeq(cpu_to_be64((val)), (__force unsigned *)(addr))
468
469 /*
470 * Some code tests for these symbols
471 */
472 #define readq readq
473 #define writeq writeq
474
475 #define __BUILD_MEMORY_STRING(bwlq, type) \
476 \
477 static inline void writes##bwlq(volatile void __iomem *mem, \
478 const void *addr, unsigned int count) \
479 { \
480 const volatile type *__addr = addr; \
481 \
482 while (count--) { \
483 __mem_write##bwlq(*__addr, mem); \
484 __addr++; \
485 } \
486 } \
487 \
488 static inline void reads##bwlq(volatile void __iomem *mem, void *addr, \
489 unsigned int count) \
490 { \
491 volatile type *__addr = addr; \
492 \
493 while (count--) { \
494 *__addr = __mem_read##bwlq(mem); \
495 __addr++; \
496 } \
497 }
498
499 #define __BUILD_IOPORT_STRING(bwlq, type) \
500 \
501 static inline void outs##bwlq(unsigned long port, const void *addr, \
502 unsigned int count) \
503 { \
504 const volatile type *__addr = addr; \
505 \
506 while (count--) { \
507 __mem_out##bwlq(*__addr, port); \
508 __addr++; \
509 } \
510 } \
511 \
512 static inline void ins##bwlq(unsigned long port, void *addr, \
513 unsigned int count) \
514 { \
515 volatile type *__addr = addr; \
516 \
517 while (count--) { \
518 *__addr = __mem_in##bwlq(port); \
519 __addr++; \
520 } \
521 }
522
523 #define BUILDSTRING(bwlq, type) \
524 \
525 __BUILD_MEMORY_STRING(bwlq, type) \
526 __BUILD_IOPORT_STRING(bwlq, type)
527
528 BUILDSTRING(b, u8)
529 BUILDSTRING(w, u16)
530 BUILDSTRING(l, u32)
531 #ifdef CONFIG_64BIT
532 BUILDSTRING(q, u64)
533 #endif
534
535
536 #ifdef CONFIG_CPU_CAVIUM_OCTEON
537 #define mmiowb() wmb()
538 #else
539 /* Depends on MIPS II instruction set */
540 #define mmiowb() asm volatile ("sync" ::: "memory")
541 #endif
542
543 static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
544 {
545 memset((void __force *) addr, val, count);
546 }
547 static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
548 {
549 memcpy(dst, (void __force *) src, count);
550 }
551 static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
552 {
553 memcpy((void __force *) dst, src, count);
554 }
555
556 /*
557 * The caches on some architectures aren't dma-coherent and have need to
558 * handle this in software. There are three types of operations that
559 * can be applied to dma buffers.
560 *
561 * - dma_cache_wback_inv(start, size) makes caches and coherent by
562 * writing the content of the caches back to memory, if necessary.
563 * The function also invalidates the affected part of the caches as
564 * necessary before DMA transfers from outside to memory.
565 * - dma_cache_wback(start, size) makes caches and coherent by
566 * writing the content of the caches back to memory, if necessary.
567 * The function also invalidates the affected part of the caches as
568 * necessary before DMA transfers from outside to memory.
569 * - dma_cache_inv(start, size) invalidates the affected parts of the
570 * caches. Dirty lines of the caches may be written back or simply
571 * be discarded. This operation is necessary before dma operations
572 * to the memory.
573 *
574 * This API used to be exported; it now is for arch code internal use only.
575 */
576 #ifdef CONFIG_DMA_NONCOHERENT
577
578 extern void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size);
579 extern void (*_dma_cache_wback)(unsigned long start, unsigned long size);
580 extern void (*_dma_cache_inv)(unsigned long start, unsigned long size);
581
582 #define dma_cache_wback_inv(start, size) _dma_cache_wback_inv(start, size)
583 #define dma_cache_wback(start, size) _dma_cache_wback(start, size)
584 #define dma_cache_inv(start, size) _dma_cache_inv(start, size)
585
586 #else /* Sane hardware */
587
588 #define dma_cache_wback_inv(start,size) \
589 do { (void) (start); (void) (size); } while (0)
590 #define dma_cache_wback(start,size) \
591 do { (void) (start); (void) (size); } while (0)
592 #define dma_cache_inv(start,size) \
593 do { (void) (start); (void) (size); } while (0)
594
595 #endif /* CONFIG_DMA_NONCOHERENT */
596
597 /*
598 * Read a 32-bit register that requires a 64-bit read cycle on the bus.
599 * Avoid interrupt mucking, just adjust the address for 4-byte access.
600 * Assume the addresses are 8-byte aligned.
601 */
602 #ifdef __MIPSEB__
603 #define __CSR_32_ADJUST 4
604 #else
605 #define __CSR_32_ADJUST 0
606 #endif
607
608 #define csr_out32(v, a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST) = (v))
609 #define csr_in32(a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST))
610
611 /*
612 * Convert a physical pointer to a virtual kernel pointer for /dev/mem
613 * access
614 */
615 #define xlate_dev_mem_ptr(p) __va(p)
616
617 /*
618 * Convert a virtual cached pointer to an uncached pointer
619 */
620 #define xlate_dev_kmem_ptr(p) p
621
622 #endif /* _ASM_IO_H */
Linux kernel - Deliverables
This page took 0.058187 seconds and 5 git commands to generate.