MIPS: Enable L2 prefetching for CM >= 2.5
[deliverable/linux.git] / arch / mips / include / asm / mips-cm.h
1 /*
2 * Copyright (C) 2013 Imagination Technologies
3 * Author: Paul Burton <paul.burton@imgtec.com>
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License as published by the
7 * Free Software Foundation; either version 2 of the License, or (at your
8 * option) any later version.
9 */
10
11 #ifndef __MIPS_ASM_MIPS_CM_H__
12 #define __MIPS_ASM_MIPS_CM_H__
13
14 #include <linux/errno.h>
15 #include <linux/io.h>
16 #include <linux/types.h>
17
18 /* The base address of the CM GCR block */
19 extern void __iomem *mips_cm_base;
20
21 /* The base address of the CM L2-only sync region */
22 extern void __iomem *mips_cm_l2sync_base;
23
24 /**
25 * __mips_cm_phys_base - retrieve the physical base address of the CM
26 *
27 * This function returns the physical base address of the Coherence Manager
28 * global control block, or 0 if no Coherence Manager is present. It provides
29 * a default implementation which reads the CMGCRBase register where available,
30 * and may be overriden by platforms which determine this address in a
31 * different way by defining a function with the same prototype except for the
32 * name mips_cm_phys_base (without underscores).
33 */
34 extern phys_addr_t __mips_cm_phys_base(void);
35
36 /*
37 * mips_cm_is64 - determine CM register width
38 *
39 * The CM register width is processor and CM specific. A 64-bit processor
40 * usually has a 64-bit CM and a 32-bit one has a 32-bit CM but a 64-bit
41 * processor could come with a 32-bit CM. Moreover, accesses on 64-bit CMs
42 * can be done either using regular 64-bit load/store instructions, or 32-bit
43 * load/store instruction on 32-bit register pairs. We opt for using 64-bit
44 * accesses on 64-bit CMs and kernels and 32-bit in any other case.
45 *
46 * It's set to 0 for 32-bit accesses and 1 for 64-bit accesses.
47 */
48 extern int mips_cm_is64;
49
50 /**
51 * mips_cm_error_report - Report CM cache errors
52 */
53 #ifdef CONFIG_MIPS_CM
54 extern void mips_cm_error_report(void);
55 #else
56 static inline void mips_cm_error_report(void) {}
57 #endif
58
59 /**
60 * mips_cm_probe - probe for a Coherence Manager
61 *
62 * Attempt to detect the presence of a Coherence Manager. Returns 0 if a CM
63 * is successfully detected, else -errno.
64 */
65 #ifdef CONFIG_MIPS_CM
66 extern int mips_cm_probe(void);
67 #else
68 static inline int mips_cm_probe(void)
69 {
70 return -ENODEV;
71 }
72 #endif
73
74 /**
75 * mips_cm_present - determine whether a Coherence Manager is present
76 *
77 * Returns true if a CM is present in the system, else false.
78 */
79 static inline bool mips_cm_present(void)
80 {
81 #ifdef CONFIG_MIPS_CM
82 return mips_cm_base != NULL;
83 #else
84 return false;
85 #endif
86 }
87
88 /**
89 * mips_cm_has_l2sync - determine whether an L2-only sync region is present
90 *
91 * Returns true if the system implements an L2-only sync region, else false.
92 */
93 static inline bool mips_cm_has_l2sync(void)
94 {
95 #ifdef CONFIG_MIPS_CM
96 return mips_cm_l2sync_base != NULL;
97 #else
98 return false;
99 #endif
100 }
101
102 /* Offsets to register blocks from the CM base address */
103 #define MIPS_CM_GCB_OFS 0x0000 /* Global Control Block */
104 #define MIPS_CM_CLCB_OFS 0x2000 /* Core Local Control Block */
105 #define MIPS_CM_COCB_OFS 0x4000 /* Core Other Control Block */
106 #define MIPS_CM_GDB_OFS 0x6000 /* Global Debug Block */
107
108 /* Total size of the CM memory mapped registers */
109 #define MIPS_CM_GCR_SIZE 0x8000
110
111 /* Size of the L2-only sync region */
112 #define MIPS_CM_L2SYNC_SIZE 0x1000
113
114 /* Macros to ease the creation of register access functions */
115 #define BUILD_CM_R_(name, off) \
116 static inline unsigned long __iomem *addr_gcr_##name(void) \
117 { \
118 return (unsigned long __iomem *)(mips_cm_base + (off)); \
119 } \
120 \
121 static inline u32 read32_gcr_##name(void) \
122 { \
123 return __raw_readl(addr_gcr_##name()); \
124 } \
125 \
126 static inline u64 read64_gcr_##name(void) \
127 { \
128 return __raw_readq(addr_gcr_##name()); \
129 } \
130 \
131 static inline unsigned long read_gcr_##name(void) \
132 { \
133 if (mips_cm_is64) \
134 return read64_gcr_##name(); \
135 else \
136 return read32_gcr_##name(); \
137 }
138
139 #define BUILD_CM__W(name, off) \
140 static inline void write32_gcr_##name(u32 value) \
141 { \
142 __raw_writel(value, addr_gcr_##name()); \
143 } \
144 \
145 static inline void write64_gcr_##name(u64 value) \
146 { \
147 __raw_writeq(value, addr_gcr_##name()); \
148 } \
149 \
150 static inline void write_gcr_##name(unsigned long value) \
151 { \
152 if (mips_cm_is64) \
153 write64_gcr_##name(value); \
154 else \
155 write32_gcr_##name(value); \
156 }
157
158 #define BUILD_CM_RW(name, off) \
159 BUILD_CM_R_(name, off) \
160 BUILD_CM__W(name, off)
161
162 #define BUILD_CM_Cx_R_(name, off) \
163 BUILD_CM_R_(cl_##name, MIPS_CM_CLCB_OFS + (off)) \
164 BUILD_CM_R_(co_##name, MIPS_CM_COCB_OFS + (off))
165
166 #define BUILD_CM_Cx__W(name, off) \
167 BUILD_CM__W(cl_##name, MIPS_CM_CLCB_OFS + (off)) \
168 BUILD_CM__W(co_##name, MIPS_CM_COCB_OFS + (off))
169
170 #define BUILD_CM_Cx_RW(name, off) \
171 BUILD_CM_Cx_R_(name, off) \
172 BUILD_CM_Cx__W(name, off)
173
174 /* GCB register accessor functions */
175 BUILD_CM_R_(config, MIPS_CM_GCB_OFS + 0x00)
176 BUILD_CM_RW(base, MIPS_CM_GCB_OFS + 0x08)
177 BUILD_CM_RW(access, MIPS_CM_GCB_OFS + 0x20)
178 BUILD_CM_R_(rev, MIPS_CM_GCB_OFS + 0x30)
179 BUILD_CM_RW(error_mask, MIPS_CM_GCB_OFS + 0x40)
180 BUILD_CM_RW(error_cause, MIPS_CM_GCB_OFS + 0x48)
181 BUILD_CM_RW(error_addr, MIPS_CM_GCB_OFS + 0x50)
182 BUILD_CM_RW(error_mult, MIPS_CM_GCB_OFS + 0x58)
183 BUILD_CM_RW(l2_only_sync_base, MIPS_CM_GCB_OFS + 0x70)
184 BUILD_CM_RW(gic_base, MIPS_CM_GCB_OFS + 0x80)
185 BUILD_CM_RW(cpc_base, MIPS_CM_GCB_OFS + 0x88)
186 BUILD_CM_RW(reg0_base, MIPS_CM_GCB_OFS + 0x90)
187 BUILD_CM_RW(reg0_mask, MIPS_CM_GCB_OFS + 0x98)
188 BUILD_CM_RW(reg1_base, MIPS_CM_GCB_OFS + 0xa0)
189 BUILD_CM_RW(reg1_mask, MIPS_CM_GCB_OFS + 0xa8)
190 BUILD_CM_RW(reg2_base, MIPS_CM_GCB_OFS + 0xb0)
191 BUILD_CM_RW(reg2_mask, MIPS_CM_GCB_OFS + 0xb8)
192 BUILD_CM_RW(reg3_base, MIPS_CM_GCB_OFS + 0xc0)
193 BUILD_CM_RW(reg3_mask, MIPS_CM_GCB_OFS + 0xc8)
194 BUILD_CM_R_(gic_status, MIPS_CM_GCB_OFS + 0xd0)
195 BUILD_CM_R_(cpc_status, MIPS_CM_GCB_OFS + 0xf0)
196 BUILD_CM_RW(l2_config, MIPS_CM_GCB_OFS + 0x130)
197 BUILD_CM_RW(sys_config2, MIPS_CM_GCB_OFS + 0x150)
198 BUILD_CM_RW(l2_pft_control, MIPS_CM_GCB_OFS + 0x300)
199 BUILD_CM_RW(l2_pft_control_b, MIPS_CM_GCB_OFS + 0x308)
200
201 /* Core Local & Core Other register accessor functions */
202 BUILD_CM_Cx_RW(reset_release, 0x00)
203 BUILD_CM_Cx_RW(coherence, 0x08)
204 BUILD_CM_Cx_R_(config, 0x10)
205 BUILD_CM_Cx_RW(other, 0x18)
206 BUILD_CM_Cx_RW(reset_base, 0x20)
207 BUILD_CM_Cx_R_(id, 0x28)
208 BUILD_CM_Cx_RW(reset_ext_base, 0x30)
209 BUILD_CM_Cx_R_(tcid_0_priority, 0x40)
210 BUILD_CM_Cx_R_(tcid_1_priority, 0x48)
211 BUILD_CM_Cx_R_(tcid_2_priority, 0x50)
212 BUILD_CM_Cx_R_(tcid_3_priority, 0x58)
213 BUILD_CM_Cx_R_(tcid_4_priority, 0x60)
214 BUILD_CM_Cx_R_(tcid_5_priority, 0x68)
215 BUILD_CM_Cx_R_(tcid_6_priority, 0x70)
216 BUILD_CM_Cx_R_(tcid_7_priority, 0x78)
217 BUILD_CM_Cx_R_(tcid_8_priority, 0x80)
218
219 /* GCR_CONFIG register fields */
220 #define CM_GCR_CONFIG_NUMIOCU_SHF 8
221 #define CM_GCR_CONFIG_NUMIOCU_MSK (_ULCAST_(0xf) << 8)
222 #define CM_GCR_CONFIG_PCORES_SHF 0
223 #define CM_GCR_CONFIG_PCORES_MSK (_ULCAST_(0xff) << 0)
224
225 /* GCR_BASE register fields */
226 #define CM_GCR_BASE_GCRBASE_SHF 15
227 #define CM_GCR_BASE_GCRBASE_MSK (_ULCAST_(0x1ffff) << 15)
228 #define CM_GCR_BASE_CMDEFTGT_SHF 0
229 #define CM_GCR_BASE_CMDEFTGT_MSK (_ULCAST_(0x3) << 0)
230 #define CM_GCR_BASE_CMDEFTGT_DISABLED 0
231 #define CM_GCR_BASE_CMDEFTGT_MEM 1
232 #define CM_GCR_BASE_CMDEFTGT_IOCU0 2
233 #define CM_GCR_BASE_CMDEFTGT_IOCU1 3
234
235 /* GCR_ACCESS register fields */
236 #define CM_GCR_ACCESS_ACCESSEN_SHF 0
237 #define CM_GCR_ACCESS_ACCESSEN_MSK (_ULCAST_(0xff) << 0)
238
239 /* GCR_REV register fields */
240 #define CM_GCR_REV_MAJOR_SHF 8
241 #define CM_GCR_REV_MAJOR_MSK (_ULCAST_(0xff) << 8)
242 #define CM_GCR_REV_MINOR_SHF 0
243 #define CM_GCR_REV_MINOR_MSK (_ULCAST_(0xff) << 0)
244
245 #define CM_ENCODE_REV(major, minor) \
246 (((major) << CM_GCR_REV_MAJOR_SHF) | \
247 ((minor) << CM_GCR_REV_MINOR_SHF))
248
249 #define CM_REV_CM2 CM_ENCODE_REV(6, 0)
250 #define CM_REV_CM2_5 CM_ENCODE_REV(7, 0)
251 #define CM_REV_CM3 CM_ENCODE_REV(8, 0)
252
253 /* GCR_ERROR_CAUSE register fields */
254 #define CM_GCR_ERROR_CAUSE_ERRTYPE_SHF 27
255 #define CM_GCR_ERROR_CAUSE_ERRTYPE_MSK (_ULCAST_(0x1f) << 27)
256 #define CM_GCR_ERROR_CAUSE_ERRINFO_SHF 0
257 #define CM_GCR_ERROR_CAUSE_ERRINGO_MSK (_ULCAST_(0x7ffffff) << 0)
258
259 /* GCR_ERROR_MULT register fields */
260 #define CM_GCR_ERROR_MULT_ERR2ND_SHF 0
261 #define CM_GCR_ERROR_MULT_ERR2ND_MSK (_ULCAST_(0x1f) << 0)
262
263 /* GCR_L2_ONLY_SYNC_BASE register fields */
264 #define CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE_SHF 12
265 #define CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE_MSK (_ULCAST_(0xfffff) << 12)
266 #define CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN_SHF 0
267 #define CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN_MSK (_ULCAST_(0x1) << 0)
268
269 /* GCR_GIC_BASE register fields */
270 #define CM_GCR_GIC_BASE_GICBASE_SHF 17
271 #define CM_GCR_GIC_BASE_GICBASE_MSK (_ULCAST_(0x7fff) << 17)
272 #define CM_GCR_GIC_BASE_GICEN_SHF 0
273 #define CM_GCR_GIC_BASE_GICEN_MSK (_ULCAST_(0x1) << 0)
274
275 /* GCR_CPC_BASE register fields */
276 #define CM_GCR_CPC_BASE_CPCBASE_SHF 17
277 #define CM_GCR_CPC_BASE_CPCBASE_MSK (_ULCAST_(0x7fff) << 17)
278 #define CM_GCR_CPC_BASE_CPCEN_SHF 0
279 #define CM_GCR_CPC_BASE_CPCEN_MSK (_ULCAST_(0x1) << 0)
280
281 /* GCR_GIC_STATUS register fields */
282 #define CM_GCR_GIC_STATUS_GICEX_SHF 0
283 #define CM_GCR_GIC_STATUS_GICEX_MSK (_ULCAST_(0x1) << 0)
284
285 /* GCR_REGn_BASE register fields */
286 #define CM_GCR_REGn_BASE_BASEADDR_SHF 16
287 #define CM_GCR_REGn_BASE_BASEADDR_MSK (_ULCAST_(0xffff) << 16)
288
289 /* GCR_REGn_MASK register fields */
290 #define CM_GCR_REGn_MASK_ADDRMASK_SHF 16
291 #define CM_GCR_REGn_MASK_ADDRMASK_MSK (_ULCAST_(0xffff) << 16)
292 #define CM_GCR_REGn_MASK_CCAOVR_SHF 5
293 #define CM_GCR_REGn_MASK_CCAOVR_MSK (_ULCAST_(0x3) << 5)
294 #define CM_GCR_REGn_MASK_CCAOVREN_SHF 4
295 #define CM_GCR_REGn_MASK_CCAOVREN_MSK (_ULCAST_(0x1) << 4)
296 #define CM_GCR_REGn_MASK_DROPL2_SHF 2
297 #define CM_GCR_REGn_MASK_DROPL2_MSK (_ULCAST_(0x1) << 2)
298 #define CM_GCR_REGn_MASK_CMTGT_SHF 0
299 #define CM_GCR_REGn_MASK_CMTGT_MSK (_ULCAST_(0x3) << 0)
300 #define CM_GCR_REGn_MASK_CMTGT_DISABLED (_ULCAST_(0x0) << 0)
301 #define CM_GCR_REGn_MASK_CMTGT_MEM (_ULCAST_(0x1) << 0)
302 #define CM_GCR_REGn_MASK_CMTGT_IOCU0 (_ULCAST_(0x2) << 0)
303 #define CM_GCR_REGn_MASK_CMTGT_IOCU1 (_ULCAST_(0x3) << 0)
304
305 /* GCR_GIC_STATUS register fields */
306 #define CM_GCR_GIC_STATUS_EX_SHF 0
307 #define CM_GCR_GIC_STATUS_EX_MSK (_ULCAST_(0x1) << 0)
308
309 /* GCR_CPC_STATUS register fields */
310 #define CM_GCR_CPC_STATUS_EX_SHF 0
311 #define CM_GCR_CPC_STATUS_EX_MSK (_ULCAST_(0x1) << 0)
312
313 /* GCR_L2_CONFIG register fields */
314 #define CM_GCR_L2_CONFIG_BYPASS_SHF 20
315 #define CM_GCR_L2_CONFIG_BYPASS_MSK (_ULCAST_(0x1) << 20)
316 #define CM_GCR_L2_CONFIG_SET_SIZE_SHF 12
317 #define CM_GCR_L2_CONFIG_SET_SIZE_MSK (_ULCAST_(0xf) << 12)
318 #define CM_GCR_L2_CONFIG_LINE_SIZE_SHF 8
319 #define CM_GCR_L2_CONFIG_LINE_SIZE_MSK (_ULCAST_(0xf) << 8)
320 #define CM_GCR_L2_CONFIG_ASSOC_SHF 0
321 #define CM_GCR_L2_CONFIG_ASSOC_MSK (_ULCAST_(0xff) << 0)
322
323 /* GCR_SYS_CONFIG2 register fields */
324 #define CM_GCR_SYS_CONFIG2_MAXVPW_SHF 0
325 #define CM_GCR_SYS_CONFIG2_MAXVPW_MSK (_ULCAST_(0xf) << 0)
326
327 /* GCR_L2_PFT_CONTROL register fields */
328 #define CM_GCR_L2_PFT_CONTROL_PAGEMASK_SHF 12
329 #define CM_GCR_L2_PFT_CONTROL_PAGEMASK_MSK (_ULCAST_(0xfffff) << 12)
330 #define CM_GCR_L2_PFT_CONTROL_PFTEN_SHF 8
331 #define CM_GCR_L2_PFT_CONTROL_PFTEN_MSK (_ULCAST_(0x1) << 8)
332 #define CM_GCR_L2_PFT_CONTROL_NPFT_SHF 0
333 #define CM_GCR_L2_PFT_CONTROL_NPFT_MSK (_ULCAST_(0xff) << 0)
334
335 /* GCR_L2_PFT_CONTROL_B register fields */
336 #define CM_GCR_L2_PFT_CONTROL_B_CEN_SHF 8
337 #define CM_GCR_L2_PFT_CONTROL_B_CEN_MSK (_ULCAST_(0x1) << 8)
338 #define CM_GCR_L2_PFT_CONTROL_B_PORTID_SHF 0
339 #define CM_GCR_L2_PFT_CONTROL_B_PORTID_MSK (_ULCAST_(0xff) << 0)
340
341 /* GCR_Cx_COHERENCE register fields */
342 #define CM_GCR_Cx_COHERENCE_COHDOMAINEN_SHF 0
343 #define CM_GCR_Cx_COHERENCE_COHDOMAINEN_MSK (_ULCAST_(0xff) << 0)
344
345 /* GCR_Cx_CONFIG register fields */
346 #define CM_GCR_Cx_CONFIG_IOCUTYPE_SHF 10
347 #define CM_GCR_Cx_CONFIG_IOCUTYPE_MSK (_ULCAST_(0x3) << 10)
348 #define CM_GCR_Cx_CONFIG_PVPE_SHF 0
349 #define CM_GCR_Cx_CONFIG_PVPE_MSK (_ULCAST_(0x1ff) << 0)
350
351 /* GCR_Cx_OTHER register fields */
352 #define CM_GCR_Cx_OTHER_CORENUM_SHF 16
353 #define CM_GCR_Cx_OTHER_CORENUM_MSK (_ULCAST_(0xffff) << 16)
354
355 /* GCR_Cx_RESET_BASE register fields */
356 #define CM_GCR_Cx_RESET_BASE_BEVEXCBASE_SHF 12
357 #define CM_GCR_Cx_RESET_BASE_BEVEXCBASE_MSK (_ULCAST_(0xfffff) << 12)
358
359 /* GCR_Cx_RESET_EXT_BASE register fields */
360 #define CM_GCR_Cx_RESET_EXT_BASE_EVARESET_SHF 31
361 #define CM_GCR_Cx_RESET_EXT_BASE_EVARESET_MSK (_ULCAST_(0x1) << 31)
362 #define CM_GCR_Cx_RESET_EXT_BASE_UEB_SHF 30
363 #define CM_GCR_Cx_RESET_EXT_BASE_UEB_MSK (_ULCAST_(0x1) << 30)
364 #define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCMASK_SHF 20
365 #define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCMASK_MSK (_ULCAST_(0xff) << 20)
366 #define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCPA_SHF 1
367 #define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCPA_MSK (_ULCAST_(0x7f) << 1)
368 #define CM_GCR_Cx_RESET_EXT_BASE_PRESENT_SHF 0
369 #define CM_GCR_Cx_RESET_EXT_BASE_PRESENT_MSK (_ULCAST_(0x1) << 0)
370
371 /**
372 * mips_cm_numcores - return the number of cores present in the system
373 *
374 * Returns the value of the PCORES field of the GCR_CONFIG register plus 1, or
375 * zero if no Coherence Manager is present.
376 */
377 static inline unsigned mips_cm_numcores(void)
378 {
379 if (!mips_cm_present())
380 return 0;
381
382 return ((read_gcr_config() & CM_GCR_CONFIG_PCORES_MSK)
383 >> CM_GCR_CONFIG_PCORES_SHF) + 1;
384 }
385
386 /**
387 * mips_cm_numiocu - return the number of IOCUs present in the system
388 *
389 * Returns the value of the NUMIOCU field of the GCR_CONFIG register, or zero
390 * if no Coherence Manager is present.
391 */
392 static inline unsigned mips_cm_numiocu(void)
393 {
394 if (!mips_cm_present())
395 return 0;
396
397 return (read_gcr_config() & CM_GCR_CONFIG_NUMIOCU_MSK)
398 >> CM_GCR_CONFIG_NUMIOCU_SHF;
399 }
400
401 /**
402 * mips_cm_l2sync - perform an L2-only sync operation
403 *
404 * If an L2-only sync region is present in the system then this function
405 * performs and L2-only sync and returns zero. Otherwise it returns -ENODEV.
406 */
407 static inline int mips_cm_l2sync(void)
408 {
409 if (!mips_cm_has_l2sync())
410 return -ENODEV;
411
412 writel(0, mips_cm_l2sync_base);
413 return 0;
414 }
415
416 /**
417 * mips_cm_revision() - return CM revision
418 *
419 * Return: The revision of the CM, from GCR_REV, or 0 if no CM is present. The
420 * return value should be checked against the CM_REV_* macros.
421 */
422 static inline int mips_cm_revision(void)
423 {
424 if (!mips_cm_present())
425 return 0;
426
427 return read_gcr_rev();
428 }
429
430 /**
431 * mips_cm_max_vp_width() - return the width in bits of VP indices
432 *
433 * Return: the width, in bits, of VP indices in fields that combine core & VP
434 * indices.
435 */
436 static inline unsigned int mips_cm_max_vp_width(void)
437 {
438 extern int smp_num_siblings;
439
440 if (mips_cm_revision() >= CM_REV_CM3)
441 return read_gcr_sys_config2() & CM_GCR_SYS_CONFIG2_MAXVPW_MSK;
442
443 return smp_num_siblings;
444 }
445
446 /**
447 * mips_cm_vp_id() - calculate the hardware VP ID for a CPU
448 * @cpu: the CPU whose VP ID to calculate
449 *
450 * Hardware such as the GIC uses identifiers for VPs which may not match the
451 * CPU numbers used by Linux. This function calculates the hardware VP
452 * identifier corresponding to a given CPU.
453 *
454 * Return: the VP ID for the CPU.
455 */
456 static inline unsigned int mips_cm_vp_id(unsigned int cpu)
457 {
458 unsigned int core = cpu_data[cpu].core;
459 unsigned int vp = cpu_vpe_id(&cpu_data[cpu]);
460
461 return (core * mips_cm_max_vp_width()) + vp;
462 }
463
464 #endif /* __MIPS_ASM_MIPS_CM_H__ */
This page took 0.053726 seconds and 5 git commands to generate.