b59ba6b93cdd26e24cb9376e2c4a7a4c8ebbe8ff
[deliverable/linux.git] / arch / mips / jazz / setup.c
1 /*
2 * Setup pointers to hardware-dependent routines.
3 *
4 * This file is subject to the terms and conditions of the GNU General Public
5 * License. See the file "COPYING" in the main directory of this archive
6 * for more details.
7 *
8 * Copyright (C) 1996, 1997, 1998, 2001, 07 by Ralf Baechle
9 * Copyright (C) 2001 MIPS Technologies, Inc.
10 * Copyright (C) 2007 by Thomas Bogendoerfer
11 */
12 #include <linux/eisa.h>
13 #include <linux/init.h>
14 #include <linux/ioport.h>
15 #include <linux/sched.h>
16 #include <linux/interrupt.h>
17 #include <linux/mm.h>
18 #include <linux/console.h>
19 #include <linux/fb.h>
20 #include <linux/pm.h>
21 #include <linux/screen_info.h>
22 #include <linux/platform_device.h>
23 #include <linux/serial_8250.h>
24
25 #include <asm/bootinfo.h>
26 #include <asm/irq.h>
27 #include <asm/jazz.h>
28 #include <asm/jazzdma.h>
29 #include <asm/reboot.h>
30 #include <asm/io.h>
31 #include <asm/pgtable.h>
32 #include <asm/time.h>
33 #include <asm/traps.h>
34 #include <asm/mc146818-time.h>
35
36 extern asmlinkage void jazz_handle_int(void);
37
38 extern void jazz_machine_restart(char *command);
39
40 static struct resource jazz_io_resources[] = {
41 {
42 .start = 0x00,
43 .end = 0x1f,
44 .name = "dma1",
45 .flags = IORESOURCE_BUSY
46 }, {
47 .start = 0x40,
48 .end = 0x5f,
49 .name = "timer",
50 .flags = IORESOURCE_BUSY
51 }, {
52 .start = 0x80,
53 .end = 0x8f,
54 .name = "dma page reg",
55 .flags = IORESOURCE_BUSY
56 }, {
57 .start = 0xc0,
58 .end = 0xdf,
59 .name = "dma2",
60 .flags = IORESOURCE_BUSY
61 }
62 };
63
64 void __init plat_mem_setup(void)
65 {
66 int i;
67
68 /* Map 0xe0000000 -> 0x0:800005C0, 0xe0010000 -> 0x1:30000580 */
69 add_wired_entry(0x02000017, 0x03c00017, 0xe0000000, PM_64K);
70 /* Map 0xe2000000 -> 0x0:900005C0, 0xe3010000 -> 0x0:910005C0 */
71 add_wired_entry(0x02400017, 0x02440017, 0xe2000000, PM_16M);
72 /* Map 0xe4000000 -> 0x0:600005C0, 0xe4100000 -> 400005C0 */
73 add_wired_entry(0x01800017, 0x01000017, 0xe4000000, PM_4M);
74
75 set_io_port_base(JAZZ_PORT_BASE);
76 #ifdef CONFIG_EISA
77 EISA_bus = 1;
78 #endif
79
80 /* request I/O space for devices used on all i[345]86 PCs */
81 for (i = 0; i < ARRAY_SIZE(jazz_io_resources); i++)
82 request_resource(&ioport_resource, jazz_io_resources + i);
83
84 /* The RTC is outside the port address space */
85
86 _machine_restart = jazz_machine_restart;
87
88 #ifdef CONFIG_VT
89 screen_info = (struct screen_info) {
90 0, 0, /* orig-x, orig-y */
91 0, /* unused */
92 0, /* orig_video_page */
93 0, /* orig_video_mode */
94 160, /* orig_video_cols */
95 0, 0, 0, /* unused, ega_bx, unused */
96 64, /* orig_video_lines */
97 0, /* orig_video_isVGA */
98 16 /* orig_video_points */
99 };
100 #endif
101
102 add_preferred_console("ttyS", 0, "9600");
103 }
104
105 #ifdef CONFIG_OLIVETTI_M700
106 #define UART_CLK 1843200
107 #else
108 /* Some Jazz machines seem to have an 8MHz crystal clock but I don't know
109 exactly which ones ... XXX */
110 #define UART_CLK (8000000 / 16) /* ( 3072000 / 16) */
111 #endif
112
113 #define MEMPORT(_base, _irq) \
114 { \
115 .mapbase = (_base), \
116 .membase = (void *)(_base), \
117 .irq = (_irq), \
118 .uartclk = UART_CLK, \
119 .iotype = UPIO_MEM, \
120 .flags = UPF_BOOT_AUTOCONF, \
121 }
122
123 static struct plat_serial8250_port jazz_serial_data[] = {
124 MEMPORT(JAZZ_SERIAL1_BASE, JAZZ_SERIAL1_IRQ),
125 MEMPORT(JAZZ_SERIAL2_BASE, JAZZ_SERIAL2_IRQ),
126 { },
127 };
128
129 static struct platform_device jazz_serial8250_device = {
130 .name = "serial8250",
131 .id = PLAT8250_DEV_PLATFORM,
132 .dev = {
133 .platform_data = jazz_serial_data,
134 },
135 };
136
137 static struct resource jazz_esp_rsrc[] = {
138 {
139 .start = JAZZ_SCSI_BASE,
140 .end = JAZZ_SCSI_BASE + 31,
141 .flags = IORESOURCE_MEM
142 },
143 {
144 .start = JAZZ_SCSI_DMA,
145 .end = JAZZ_SCSI_DMA,
146 .flags = IORESOURCE_MEM
147 },
148 {
149 .start = JAZZ_SCSI_IRQ,
150 .end = JAZZ_SCSI_IRQ,
151 .flags = IORESOURCE_IRQ
152 }
153 };
154
155 static struct platform_device jazz_esp_pdev = {
156 .name = "jazz_esp",
157 .num_resources = ARRAY_SIZE(jazz_esp_rsrc),
158 .resource = jazz_esp_rsrc
159 };
160
161 static struct resource jazz_sonic_rsrc[] = {
162 {
163 .start = JAZZ_ETHERNET_BASE,
164 .end = JAZZ_ETHERNET_BASE + 0xff,
165 .flags = IORESOURCE_MEM
166 },
167 {
168 .start = JAZZ_ETHERNET_IRQ,
169 .end = JAZZ_ETHERNET_IRQ,
170 .flags = IORESOURCE_IRQ
171 }
172 };
173
174 static struct platform_device jazz_sonic_pdev = {
175 .name = "jazzsonic",
176 .num_resources = ARRAY_SIZE(jazz_sonic_rsrc),
177 .resource = jazz_sonic_rsrc
178 };
179
180 static struct resource jazz_cmos_rsrc[] = {
181 {
182 .start = 0x70,
183 .end = 0x71,
184 .flags = IORESOURCE_IO
185 },
186 {
187 .start = 8,
188 .end = 8,
189 .flags = IORESOURCE_IRQ
190 }
191 };
192
193 static struct platform_device jazz_cmos_pdev = {
194 .name = "rtc_cmos",
195 .num_resources = ARRAY_SIZE(jazz_cmos_rsrc),
196 .resource = jazz_cmos_rsrc
197 };
198
199 static struct platform_device pcspeaker_pdev = {
200 .name = "pcspkr",
201 .id = -1,
202 };
203
204 static int __init jazz_setup_devinit(void)
205 {
206 platform_device_register(&jazz_serial8250_device);
207 platform_device_register(&jazz_esp_pdev);
208 platform_device_register(&jazz_sonic_pdev);
209 platform_device_register(&jazz_cmos_pdev);
210 platform_device_register(&pcspeaker_pdev);
211
212 return 0;
213 }
214
215 device_initcall(jazz_setup_devinit);
This page took 0.034068 seconds and 4 git commands to generate.