[PATCH] VFS: Permit filesystem to perform statfs with a known root dentry
[deliverable/linux.git] / arch / mips / kernel / apm.c
1 /*
2 * bios-less APM driver for MIPS Linux
3 * Jamey Hicks <jamey@crl.dec.com>
4 * adapted from the APM BIOS driver for Linux by Stephen Rothwell (sfr@linuxcare.com)
5 *
6 * APM 1.2 Reference:
7 * Intel Corporation, Microsoft Corporation. Advanced Power Management
8 * (APM) BIOS Interface Specification, Revision 1.2, February 1996.
9 *
10 * [This document is available from Microsoft at:
11 * http://www.microsoft.com/hwdev/busbios/amp_12.htm]
12 */
13 #include <linux/config.h>
14 #include <linux/module.h>
15 #include <linux/poll.h>
16 #include <linux/timer.h>
17 #include <linux/slab.h>
18 #include <linux/proc_fs.h>
19 #include <linux/miscdevice.h>
20 #include <linux/apm_bios.h>
21 #include <linux/capability.h>
22 #include <linux/sched.h>
23 #include <linux/pm.h>
24 #include <linux/device.h>
25 #include <linux/kernel.h>
26 #include <linux/list.h>
27 #include <linux/init.h>
28 #include <linux/completion.h>
29
30 #include <asm/apm.h> /* apm_power_info */
31 #include <asm/system.h>
32
33 /*
34 * The apm_bios device is one of the misc char devices.
35 * This is its minor number.
36 */
37 #define APM_MINOR_DEV 134
38
39 /*
40 * See Documentation/Config.help for the configuration options.
41 *
42 * Various options can be changed at boot time as follows:
43 * (We allow underscores for compatibility with the modules code)
44 * apm=on/off enable/disable APM
45 */
46
47 /*
48 * Maximum number of events stored
49 */
50 #define APM_MAX_EVENTS 16
51
52 struct apm_queue {
53 unsigned int event_head;
54 unsigned int event_tail;
55 apm_event_t events[APM_MAX_EVENTS];
56 };
57
58 /*
59 * The per-file APM data
60 */
61 struct apm_user {
62 struct list_head list;
63
64 unsigned int suser: 1;
65 unsigned int writer: 1;
66 unsigned int reader: 1;
67
68 int suspend_result;
69 unsigned int suspend_state;
70 #define SUSPEND_NONE 0 /* no suspend pending */
71 #define SUSPEND_PENDING 1 /* suspend pending read */
72 #define SUSPEND_READ 2 /* suspend read, pending ack */
73 #define SUSPEND_ACKED 3 /* suspend acked */
74 #define SUSPEND_DONE 4 /* suspend completed */
75
76 struct apm_queue queue;
77 };
78
79 /*
80 * Local variables
81 */
82 static int suspends_pending;
83 static int apm_disabled;
84 static int mips_apm_active;
85
86 static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);
87 static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
88
89 /*
90 * This is a list of everyone who has opened /dev/apm_bios
91 */
92 static DECLARE_RWSEM(user_list_lock);
93 static LIST_HEAD(apm_user_list);
94
95 /*
96 * kapmd info. kapmd provides us a process context to handle
97 * "APM" events within - specifically necessary if we're going
98 * to be suspending the system.
99 */
100 static DECLARE_WAIT_QUEUE_HEAD(kapmd_wait);
101 static DECLARE_COMPLETION(kapmd_exit);
102 static DEFINE_SPINLOCK(kapmd_queue_lock);
103 static struct apm_queue kapmd_queue;
104
105
106 static const char driver_version[] = "1.13"; /* no spaces */
107
108
109
110 /*
111 * Compatibility cruft until the IPAQ people move over to the new
112 * interface.
113 */
114 static void __apm_get_power_status(struct apm_power_info *info)
115 {
116 }
117
118 /*
119 * This allows machines to provide their own "apm get power status" function.
120 */
121 void (*apm_get_power_status)(struct apm_power_info *) = __apm_get_power_status;
122 EXPORT_SYMBOL(apm_get_power_status);
123
124
125 /*
126 * APM event queue management.
127 */
128 static inline int queue_empty(struct apm_queue *q)
129 {
130 return q->event_head == q->event_tail;
131 }
132
133 static inline apm_event_t queue_get_event(struct apm_queue *q)
134 {
135 q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS;
136 return q->events[q->event_tail];
137 }
138
139 static void queue_add_event(struct apm_queue *q, apm_event_t event)
140 {
141 q->event_head = (q->event_head + 1) % APM_MAX_EVENTS;
142 if (q->event_head == q->event_tail) {
143 static int notified;
144
145 if (notified++ == 0)
146 printk(KERN_ERR "apm: an event queue overflowed\n");
147 q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS;
148 }
149 q->events[q->event_head] = event;
150 }
151
152 static void queue_event_one_user(struct apm_user *as, apm_event_t event)
153 {
154 if (as->suser && as->writer) {
155 switch (event) {
156 case APM_SYS_SUSPEND:
157 case APM_USER_SUSPEND:
158 /*
159 * If this user already has a suspend pending,
160 * don't queue another one.
161 */
162 if (as->suspend_state != SUSPEND_NONE)
163 return;
164
165 as->suspend_state = SUSPEND_PENDING;
166 suspends_pending++;
167 break;
168 }
169 }
170 queue_add_event(&as->queue, event);
171 }
172
173 static void queue_event(apm_event_t event, struct apm_user *sender)
174 {
175 struct apm_user *as;
176
177 down_read(&user_list_lock);
178 list_for_each_entry(as, &apm_user_list, list) {
179 if (as != sender && as->reader)
180 queue_event_one_user(as, event);
181 }
182 up_read(&user_list_lock);
183 wake_up_interruptible(&apm_waitqueue);
184 }
185
186 static void apm_suspend(void)
187 {
188 struct apm_user *as;
189 int err = pm_suspend(PM_SUSPEND_MEM);
190
191 /*
192 * Anyone on the APM queues will think we're still suspended.
193 * Send a message so everyone knows we're now awake again.
194 */
195 queue_event(APM_NORMAL_RESUME, NULL);
196
197 /*
198 * Finally, wake up anyone who is sleeping on the suspend.
199 */
200 down_read(&user_list_lock);
201 list_for_each_entry(as, &apm_user_list, list) {
202 as->suspend_result = err;
203 as->suspend_state = SUSPEND_DONE;
204 }
205 up_read(&user_list_lock);
206
207 wake_up(&apm_suspend_waitqueue);
208 }
209
210 static ssize_t apm_read(struct file *fp, char __user *buf, size_t count, loff_t *ppos)
211 {
212 struct apm_user *as = fp->private_data;
213 apm_event_t event;
214 int i = count, ret = 0;
215
216 if (count < sizeof(apm_event_t))
217 return -EINVAL;
218
219 if (queue_empty(&as->queue) && fp->f_flags & O_NONBLOCK)
220 return -EAGAIN;
221
222 wait_event_interruptible(apm_waitqueue, !queue_empty(&as->queue));
223
224 while ((i >= sizeof(event)) && !queue_empty(&as->queue)) {
225 event = queue_get_event(&as->queue);
226
227 ret = -EFAULT;
228 if (copy_to_user(buf, &event, sizeof(event)))
229 break;
230
231 if (event == APM_SYS_SUSPEND || event == APM_USER_SUSPEND)
232 as->suspend_state = SUSPEND_READ;
233
234 buf += sizeof(event);
235 i -= sizeof(event);
236 }
237
238 if (i < count)
239 ret = count - i;
240
241 return ret;
242 }
243
244 static unsigned int apm_poll(struct file *fp, poll_table * wait)
245 {
246 struct apm_user *as = fp->private_data;
247
248 poll_wait(fp, &apm_waitqueue, wait);
249 return queue_empty(&as->queue) ? 0 : POLLIN | POLLRDNORM;
250 }
251
252 /*
253 * apm_ioctl - handle APM ioctl
254 *
255 * APM_IOC_SUSPEND
256 * This IOCTL is overloaded, and performs two functions. It is used to:
257 * - initiate a suspend
258 * - acknowledge a suspend read from /dev/apm_bios.
259 * Only when everyone who has opened /dev/apm_bios with write permission
260 * has acknowledge does the actual suspend happen.
261 */
262 static int
263 apm_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg)
264 {
265 struct apm_user *as = filp->private_data;
266 unsigned long flags;
267 int err = -EINVAL;
268
269 if (!as->suser || !as->writer)
270 return -EPERM;
271
272 switch (cmd) {
273 case APM_IOC_SUSPEND:
274 as->suspend_result = -EINTR;
275
276 if (as->suspend_state == SUSPEND_READ) {
277 /*
278 * If we read a suspend command from /dev/apm_bios,
279 * then the corresponding APM_IOC_SUSPEND ioctl is
280 * interpreted as an acknowledge.
281 */
282 as->suspend_state = SUSPEND_ACKED;
283 suspends_pending--;
284 } else {
285 /*
286 * Otherwise it is a request to suspend the system.
287 * Queue an event for all readers, and expect an
288 * acknowledge from all writers who haven't already
289 * acknowledged.
290 */
291 queue_event(APM_USER_SUSPEND, as);
292 }
293
294 /*
295 * If there are no further acknowledges required, suspend
296 * the system.
297 */
298 if (suspends_pending == 0)
299 apm_suspend();
300
301 /*
302 * Wait for the suspend/resume to complete. If there are
303 * pending acknowledges, we wait here for them.
304 *
305 * Note that we need to ensure that the PM subsystem does
306 * not kick us out of the wait when it suspends the threads.
307 */
308 flags = current->flags;
309 current->flags |= PF_NOFREEZE;
310
311 /*
312 * Note: do not allow a thread which is acking the suspend
313 * to escape until the resume is complete.
314 */
315 if (as->suspend_state == SUSPEND_ACKED)
316 wait_event(apm_suspend_waitqueue,
317 as->suspend_state == SUSPEND_DONE);
318 else
319 wait_event_interruptible(apm_suspend_waitqueue,
320 as->suspend_state == SUSPEND_DONE);
321
322 current->flags = flags;
323 err = as->suspend_result;
324 as->suspend_state = SUSPEND_NONE;
325 break;
326 }
327
328 return err;
329 }
330
331 static int apm_release(struct inode * inode, struct file * filp)
332 {
333 struct apm_user *as = filp->private_data;
334 filp->private_data = NULL;
335
336 down_write(&user_list_lock);
337 list_del(&as->list);
338 up_write(&user_list_lock);
339
340 /*
341 * We are now unhooked from the chain. As far as new
342 * events are concerned, we no longer exist. However, we
343 * need to balance suspends_pending, which means the
344 * possibility of sleeping.
345 */
346 if (as->suspend_state != SUSPEND_NONE) {
347 suspends_pending -= 1;
348 if (suspends_pending == 0)
349 apm_suspend();
350 }
351
352 kfree(as);
353 return 0;
354 }
355
356 static int apm_open(struct inode * inode, struct file * filp)
357 {
358 struct apm_user *as;
359
360 as = (struct apm_user *)kzalloc(sizeof(*as), GFP_KERNEL);
361 if (as) {
362 /*
363 * XXX - this is a tiny bit broken, when we consider BSD
364 * process accounting. If the device is opened by root, we
365 * instantly flag that we used superuser privs. Who knows,
366 * we might close the device immediately without doing a
367 * privileged operation -- cevans
368 */
369 as->suser = capable(CAP_SYS_ADMIN);
370 as->writer = (filp->f_mode & FMODE_WRITE) == FMODE_WRITE;
371 as->reader = (filp->f_mode & FMODE_READ) == FMODE_READ;
372
373 down_write(&user_list_lock);
374 list_add(&as->list, &apm_user_list);
375 up_write(&user_list_lock);
376
377 filp->private_data = as;
378 }
379
380 return as ? 0 : -ENOMEM;
381 }
382
383 static struct file_operations apm_bios_fops = {
384 .owner = THIS_MODULE,
385 .read = apm_read,
386 .poll = apm_poll,
387 .ioctl = apm_ioctl,
388 .open = apm_open,
389 .release = apm_release,
390 };
391
392 static struct miscdevice apm_device = {
393 .minor = APM_MINOR_DEV,
394 .name = "apm_bios",
395 .fops = &apm_bios_fops
396 };
397
398
399 #ifdef CONFIG_PROC_FS
400 /*
401 * Arguments, with symbols from linux/apm_bios.h.
402 *
403 * 0) Linux driver version (this will change if format changes)
404 * 1) APM BIOS Version. Usually 1.0, 1.1 or 1.2.
405 * 2) APM flags from APM Installation Check (0x00):
406 * bit 0: APM_16_BIT_SUPPORT
407 * bit 1: APM_32_BIT_SUPPORT
408 * bit 2: APM_IDLE_SLOWS_CLOCK
409 * bit 3: APM_BIOS_DISABLED
410 * bit 4: APM_BIOS_DISENGAGED
411 * 3) AC line status
412 * 0x00: Off-line
413 * 0x01: On-line
414 * 0x02: On backup power (BIOS >= 1.1 only)
415 * 0xff: Unknown
416 * 4) Battery status
417 * 0x00: High
418 * 0x01: Low
419 * 0x02: Critical
420 * 0x03: Charging
421 * 0x04: Selected battery not present (BIOS >= 1.2 only)
422 * 0xff: Unknown
423 * 5) Battery flag
424 * bit 0: High
425 * bit 1: Low
426 * bit 2: Critical
427 * bit 3: Charging
428 * bit 7: No system battery
429 * 0xff: Unknown
430 * 6) Remaining battery life (percentage of charge):
431 * 0-100: valid
432 * -1: Unknown
433 * 7) Remaining battery life (time units):
434 * Number of remaining minutes or seconds
435 * -1: Unknown
436 * 8) min = minutes; sec = seconds
437 */
438 static int apm_get_info(char *buf, char **start, off_t fpos, int length)
439 {
440 struct apm_power_info info;
441 char *units;
442 int ret;
443
444 info.ac_line_status = 0xff;
445 info.battery_status = 0xff;
446 info.battery_flag = 0xff;
447 info.battery_life = -1;
448 info.time = -1;
449 info.units = -1;
450
451 if (apm_get_power_status)
452 apm_get_power_status(&info);
453
454 switch (info.units) {
455 default: units = "?"; break;
456 case 0: units = "min"; break;
457 case 1: units = "sec"; break;
458 }
459
460 ret = sprintf(buf, "%s 1.2 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n",
461 driver_version, APM_32_BIT_SUPPORT,
462 info.ac_line_status, info.battery_status,
463 info.battery_flag, info.battery_life,
464 info.time, units);
465
466 return ret;
467 }
468 #endif
469
470 static int kapmd(void *arg)
471 {
472 daemonize("kapmd");
473 current->flags |= PF_NOFREEZE;
474
475 do {
476 apm_event_t event;
477
478 wait_event_interruptible(kapmd_wait,
479 !queue_empty(&kapmd_queue) || !mips_apm_active);
480
481 if (!mips_apm_active)
482 break;
483
484 spin_lock_irq(&kapmd_queue_lock);
485 event = 0;
486 if (!queue_empty(&kapmd_queue))
487 event = queue_get_event(&kapmd_queue);
488 spin_unlock_irq(&kapmd_queue_lock);
489
490 switch (event) {
491 case 0:
492 break;
493
494 case APM_LOW_BATTERY:
495 case APM_POWER_STATUS_CHANGE:
496 queue_event(event, NULL);
497 break;
498
499 case APM_USER_SUSPEND:
500 case APM_SYS_SUSPEND:
501 queue_event(event, NULL);
502 if (suspends_pending == 0)
503 apm_suspend();
504 break;
505
506 case APM_CRITICAL_SUSPEND:
507 apm_suspend();
508 break;
509 }
510 } while (1);
511
512 complete_and_exit(&kapmd_exit, 0);
513 }
514
515 static int __init apm_init(void)
516 {
517 int ret;
518
519 if (apm_disabled) {
520 printk(KERN_NOTICE "apm: disabled on user request.\n");
521 return -ENODEV;
522 }
523
524 mips_apm_active = 1;
525
526 ret = kernel_thread(kapmd, NULL, CLONE_KERNEL);
527 if (ret < 0) {
528 mips_apm_active = 0;
529 return ret;
530 }
531
532 #ifdef CONFIG_PROC_FS
533 create_proc_info_entry("apm", 0, NULL, apm_get_info);
534 #endif
535
536 ret = misc_register(&apm_device);
537 if (ret != 0) {
538 remove_proc_entry("apm", NULL);
539
540 mips_apm_active = 0;
541 wake_up(&kapmd_wait);
542 wait_for_completion(&kapmd_exit);
543 }
544
545 return ret;
546 }
547
548 static void __exit apm_exit(void)
549 {
550 misc_deregister(&apm_device);
551 remove_proc_entry("apm", NULL);
552
553 mips_apm_active = 0;
554 wake_up(&kapmd_wait);
555 wait_for_completion(&kapmd_exit);
556 }
557
558 module_init(apm_init);
559 module_exit(apm_exit);
560
561 MODULE_AUTHOR("Stephen Rothwell");
562 MODULE_DESCRIPTION("Advanced Power Management");
563 MODULE_LICENSE("GPL");
564
565 #ifndef MODULE
566 static int __init apm_setup(char *str)
567 {
568 while ((str != NULL) && (*str != '\0')) {
569 if (strncmp(str, "off", 3) == 0)
570 apm_disabled = 1;
571 if (strncmp(str, "on", 2) == 0)
572 apm_disabled = 0;
573 str = strchr(str, ',');
574 if (str != NULL)
575 str += strspn(str, ", \t");
576 }
577 return 1;
578 }
579
580 __setup("apm=", apm_setup);
581 #endif
582
583 /**
584 * apm_queue_event - queue an APM event for kapmd
585 * @event: APM event
586 *
587 * Queue an APM event for kapmd to process and ultimately take the
588 * appropriate action. Only a subset of events are handled:
589 * %APM_LOW_BATTERY
590 * %APM_POWER_STATUS_CHANGE
591 * %APM_USER_SUSPEND
592 * %APM_SYS_SUSPEND
593 * %APM_CRITICAL_SUSPEND
594 */
595 void apm_queue_event(apm_event_t event)
596 {
597 unsigned long flags;
598
599 spin_lock_irqsave(&kapmd_queue_lock, flags);
600 queue_add_event(&kapmd_queue, event);
601 spin_unlock_irqrestore(&kapmd_queue_lock, flags);
602
603 wake_up_interruptible(&kapmd_wait);
604 }
605 EXPORT_SYMBOL(apm_queue_event);
This page took 0.048951 seconds and 5 git commands to generate.