MIPS: Loongson1B: Some updates/fixes for LS1B
[deliverable/linux.git] / arch / mips / loongson32 / common / time.c
1 /*
2 * Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
3 *
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms of the GNU General Public License as published by the
6 * Free Software Foundation; either version 2 of the License, or (at your
7 * option) any later version.
8 */
9
10 #include <linux/clk.h>
11 #include <linux/interrupt.h>
12 #include <linux/sizes.h>
13 #include <asm/time.h>
14
15 #include <loongson1.h>
16 #include <platform.h>
17
18 #ifdef CONFIG_CEVT_CSRC_LS1X
19
20 #if defined(CONFIG_TIMER_USE_PWM1)
21 #define LS1X_TIMER_BASE LS1X_PWM1_BASE
22 #define LS1X_TIMER_IRQ LS1X_PWM1_IRQ
23
24 #elif defined(CONFIG_TIMER_USE_PWM2)
25 #define LS1X_TIMER_BASE LS1X_PWM2_BASE
26 #define LS1X_TIMER_IRQ LS1X_PWM2_IRQ
27
28 #elif defined(CONFIG_TIMER_USE_PWM3)
29 #define LS1X_TIMER_BASE LS1X_PWM3_BASE
30 #define LS1X_TIMER_IRQ LS1X_PWM3_IRQ
31
32 #else
33 #define LS1X_TIMER_BASE LS1X_PWM0_BASE
34 #define LS1X_TIMER_IRQ LS1X_PWM0_IRQ
35 #endif
36
37 DEFINE_RAW_SPINLOCK(ls1x_timer_lock);
38
39 static void __iomem *timer_reg_base;
40 static uint32_t ls1x_jiffies_per_tick;
41
42 static inline void ls1x_pwmtimer_set_period(uint32_t period)
43 {
44 __raw_writel(period, timer_reg_base + PWM_HRC);
45 __raw_writel(period, timer_reg_base + PWM_LRC);
46 }
47
48 static inline void ls1x_pwmtimer_restart(void)
49 {
50 __raw_writel(0x0, timer_reg_base + PWM_CNT);
51 __raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
52 }
53
54 void __init ls1x_pwmtimer_init(void)
55 {
56 timer_reg_base = ioremap_nocache(LS1X_TIMER_BASE, SZ_16);
57 if (!timer_reg_base)
58 panic("Failed to remap timer registers");
59
60 ls1x_jiffies_per_tick = DIV_ROUND_CLOSEST(mips_hpt_frequency, HZ);
61
62 ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick);
63 ls1x_pwmtimer_restart();
64 }
65
66 static cycle_t ls1x_clocksource_read(struct clocksource *cs)
67 {
68 unsigned long flags;
69 int count;
70 u32 jifs;
71 static int old_count;
72 static u32 old_jifs;
73
74 raw_spin_lock_irqsave(&ls1x_timer_lock, flags);
75 /*
76 * Although our caller may have the read side of xtime_lock,
77 * this is now a seqlock, and we are cheating in this routine
78 * by having side effects on state that we cannot undo if
79 * there is a collision on the seqlock and our caller has to
80 * retry. (Namely, old_jifs and old_count.) So we must treat
81 * jiffies as volatile despite the lock. We read jiffies
82 * before latching the timer count to guarantee that although
83 * the jiffies value might be older than the count (that is,
84 * the counter may underflow between the last point where
85 * jiffies was incremented and the point where we latch the
86 * count), it cannot be newer.
87 */
88 jifs = jiffies;
89 /* read the count */
90 count = __raw_readl(timer_reg_base + PWM_CNT);
91
92 /*
93 * It's possible for count to appear to go the wrong way for this
94 * reason:
95 *
96 * The timer counter underflows, but we haven't handled the resulting
97 * interrupt and incremented jiffies yet.
98 *
99 * Previous attempts to handle these cases intelligently were buggy, so
100 * we just do the simple thing now.
101 */
102 if (count < old_count && jifs == old_jifs)
103 count = old_count;
104
105 old_count = count;
106 old_jifs = jifs;
107
108 raw_spin_unlock_irqrestore(&ls1x_timer_lock, flags);
109
110 return (cycle_t) (jifs * ls1x_jiffies_per_tick) + count;
111 }
112
113 static struct clocksource ls1x_clocksource = {
114 .name = "ls1x-pwmtimer",
115 .read = ls1x_clocksource_read,
116 .mask = CLOCKSOURCE_MASK(24),
117 .flags = CLOCK_SOURCE_IS_CONTINUOUS,
118 };
119
120 static irqreturn_t ls1x_clockevent_isr(int irq, void *devid)
121 {
122 struct clock_event_device *cd = devid;
123
124 ls1x_pwmtimer_restart();
125 cd->event_handler(cd);
126
127 return IRQ_HANDLED;
128 }
129
130 static int ls1x_clockevent_set_state_periodic(struct clock_event_device *cd)
131 {
132 raw_spin_lock(&ls1x_timer_lock);
133 ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick);
134 ls1x_pwmtimer_restart();
135 __raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
136 raw_spin_unlock(&ls1x_timer_lock);
137
138 return 0;
139 }
140
141 static int ls1x_clockevent_tick_resume(struct clock_event_device *cd)
142 {
143 raw_spin_lock(&ls1x_timer_lock);
144 __raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
145 raw_spin_unlock(&ls1x_timer_lock);
146
147 return 0;
148 }
149
150 static int ls1x_clockevent_set_state_shutdown(struct clock_event_device *cd)
151 {
152 raw_spin_lock(&ls1x_timer_lock);
153 __raw_writel(__raw_readl(timer_reg_base + PWM_CTRL) & ~CNT_EN,
154 timer_reg_base + PWM_CTRL);
155 raw_spin_unlock(&ls1x_timer_lock);
156
157 return 0;
158 }
159
160 static int ls1x_clockevent_set_next(unsigned long evt,
161 struct clock_event_device *cd)
162 {
163 raw_spin_lock(&ls1x_timer_lock);
164 ls1x_pwmtimer_set_period(evt);
165 ls1x_pwmtimer_restart();
166 raw_spin_unlock(&ls1x_timer_lock);
167
168 return 0;
169 }
170
171 static struct clock_event_device ls1x_clockevent = {
172 .name = "ls1x-pwmtimer",
173 .features = CLOCK_EVT_FEAT_PERIODIC,
174 .rating = 300,
175 .irq = LS1X_TIMER_IRQ,
176 .set_next_event = ls1x_clockevent_set_next,
177 .set_state_shutdown = ls1x_clockevent_set_state_shutdown,
178 .set_state_periodic = ls1x_clockevent_set_state_periodic,
179 .set_state_oneshot = ls1x_clockevent_set_state_shutdown,
180 .tick_resume = ls1x_clockevent_tick_resume,
181 };
182
183 static struct irqaction ls1x_pwmtimer_irqaction = {
184 .name = "ls1x-pwmtimer",
185 .handler = ls1x_clockevent_isr,
186 .dev_id = &ls1x_clockevent,
187 .flags = IRQF_PERCPU | IRQF_TIMER,
188 };
189
190 static void __init ls1x_time_init(void)
191 {
192 struct clock_event_device *cd = &ls1x_clockevent;
193 int ret;
194
195 if (!mips_hpt_frequency)
196 panic("Invalid timer clock rate");
197
198 ls1x_pwmtimer_init();
199
200 clockevent_set_clock(cd, mips_hpt_frequency);
201 cd->max_delta_ns = clockevent_delta2ns(0xffffff, cd);
202 cd->min_delta_ns = clockevent_delta2ns(0x000300, cd);
203 cd->cpumask = cpumask_of(smp_processor_id());
204 clockevents_register_device(cd);
205
206 ls1x_clocksource.rating = 200 + mips_hpt_frequency / 10000000;
207 ret = clocksource_register_hz(&ls1x_clocksource, mips_hpt_frequency);
208 if (ret)
209 panic(KERN_ERR "Failed to register clocksource: %d\n", ret);
210
211 setup_irq(LS1X_TIMER_IRQ, &ls1x_pwmtimer_irqaction);
212 }
213 #endif /* CONFIG_CEVT_CSRC_LS1X */
214
215 void __init plat_time_init(void)
216 {
217 struct clk *clk = NULL;
218
219 /* initialize LS1X clocks */
220 ls1x_clk_init();
221
222 #ifdef CONFIG_CEVT_CSRC_LS1X
223 /* setup LS1X PWM timer */
224 clk = clk_get(NULL, "ls1x-pwmtimer");
225 if (IS_ERR(clk))
226 panic("unable to get timer clock, err=%ld", PTR_ERR(clk));
227
228 mips_hpt_frequency = clk_get_rate(clk);
229 ls1x_time_init();
230 #else
231 /* setup mips r4k timer */
232 clk = clk_get(NULL, "cpu_clk");
233 if (IS_ERR(clk))
234 panic("unable to get cpu clock, err=%ld", PTR_ERR(clk));
235
236 mips_hpt_frequency = clk_get_rate(clk) / 2;
237 #endif /* CONFIG_CEVT_CSRC_LS1X */
238 }
This page took 0.03526 seconds and 5 git commands to generate.