spi: Use dev_get_drvdata at appropriate places
[deliverable/linux.git] / arch / mips / netlogic / common / smpboot.S
1 /*
2 * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
3 * reserved.
4 *
5 * This software is available to you under a choice of one of two
6 * licenses. You may choose to be licensed under the terms of the GNU
7 * General Public License (GPL) Version 2, available from the file
8 * COPYING in the main directory of this source tree, or the NetLogic
9 * license below:
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 *
15 * 1. Redistributions of source code must retain the above copyright
16 * notice, this list of conditions and the following disclaimer.
17 * 2. Redistributions in binary form must reproduce the above copyright
18 * notice, this list of conditions and the following disclaimer in
19 * the documentation and/or other materials provided with the
20 * distribution.
21 *
22 * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
23 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
24 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25 * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
26 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
29 * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
30 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
31 * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
32 * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35 #include <linux/init.h>
36
37 #include <asm/asm.h>
38 #include <asm/asm-offsets.h>
39 #include <asm/regdef.h>
40 #include <asm/mipsregs.h>
41 #include <asm/stackframe.h>
42 #include <asm/asmmacro.h>
43 #include <asm/addrspace.h>
44
45 #include <asm/netlogic/common.h>
46
47 #include <asm/netlogic/xlp-hal/iomap.h>
48 #include <asm/netlogic/xlp-hal/xlp.h>
49 #include <asm/netlogic/xlp-hal/sys.h>
50 #include <asm/netlogic/xlp-hal/cpucontrol.h>
51
52 #define CP0_EBASE $15
53
54 .set noreorder
55 .set noat
56 .set arch=xlr /* for mfcr/mtcr, XLR is sufficient */
57
58 FEXPORT(xlp_boot_core0_siblings) /* "Master" cpu starts from here */
59 dmtc0 sp, $4, 2 /* SP saved in UserLocal */
60 SAVE_ALL
61 sync
62 /* find the location to which nlm_boot_siblings was relocated */
63 li t0, CKSEG1ADDR(RESET_VEC_PHYS)
64 dla t1, nlm_reset_entry
65 dla t2, nlm_boot_siblings
66 dsubu t2, t1
67 daddu t2, t0
68 /* call it */
69 jr t2
70 nop
71 /* not reached */
72
73 __CPUINIT
74 NESTED(nlm_boot_secondary_cpus, 16, sp)
75 /* Initialize CP0 Status */
76 move t1, zero
77 #ifdef CONFIG_64BIT
78 ori t1, ST0_KX
79 #endif
80 mtc0 t1, CP0_STATUS
81 PTR_LA t1, nlm_next_sp
82 PTR_L sp, 0(t1)
83 PTR_LA t1, nlm_next_gp
84 PTR_L gp, 0(t1)
85
86 /* a0 has the processor id */
87 mfc0 a0, CP0_EBASE, 1
88 andi a0, 0x3ff /* a0 <- node/core */
89 PTR_LA t0, nlm_early_init_secondary
90 jalr t0
91 nop
92
93 PTR_LA t0, smp_bootstrap
94 jr t0
95 nop
96 END(nlm_boot_secondary_cpus)
97 __FINIT
98
99 /*
100 * In case of RMIboot bootloader which is used on XLR boards, the CPUs
101 * be already woken up and waiting in bootloader code.
102 * This will get them out of the bootloader code and into linux. Needed
103 * because the bootloader area will be taken and initialized by linux.
104 */
105 __CPUINIT
106 NESTED(nlm_rmiboot_preboot, 16, sp)
107 mfc0 t0, $15, 1 /* read ebase */
108 andi t0, 0x1f /* t0 has the processor_id() */
109 andi t2, t0, 0x3 /* thread num */
110 sll t0, 2 /* offset in cpu array */
111
112 li t3, CKSEG1ADDR(RESET_DATA_PHYS)
113 ADDIU t1, t3, BOOT_CPU_READY
114 ADDU t1, t0
115 li t3, 1
116 sw t3, 0(t1)
117
118 bnez t2, 1f /* skip thread programming */
119 nop /* for thread id != 0 */
120
121 /*
122 * XLR MMU setup only for first thread in core
123 */
124 li t0, 0x400
125 mfcr t1, t0
126 li t2, 6 /* XLR thread mode mask */
127 nor t3, t2, zero
128 and t2, t1, t2 /* t2 - current thread mode */
129 li v0, CKSEG1ADDR(RESET_DATA_PHYS)
130 lw v1, BOOT_THREAD_MODE(v0) /* v1 - new thread mode */
131 sll v1, 1
132 beq v1, t2, 1f /* same as request value */
133 nop /* nothing to do */
134
135 and t2, t1, t3 /* mask out old thread mode */
136 or t1, t2, v1 /* put in new value */
137 mtcr t1, t0 /* update core control */
138
139 1: wait
140 b 1b
141 nop
142 END(nlm_rmiboot_preboot)
143 __FINIT
This page took 0.03359 seconds and 5 git commands to generate.