arch/parisc/Kconfig

   1 config PARISC
   2         def_bool y
   3         select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS
   4         select HAVE_IDE
   5         select HAVE_OPROFILE
   6         select HAVE_FUNCTION_TRACER if 64BIT
   7         select HAVE_FUNCTION_GRAPH_TRACER if 64BIT
   8         select HAVE_FUNCTION_TRACE_MCOUNT_TEST if 64BIT
   9         select ARCH_WANT_FRAME_POINTERS
  10         select RTC_CLASS
  11         select RTC_DRV_GENERIC
  12         select INIT_ALL_POSSIBLE
  13         select BUG
  14         select HAVE_PERF_EVENTS
  15         select GENERIC_ATOMIC64 if !64BIT
  16         select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
  17         select BROKEN_RODATA
  18         select GENERIC_IRQ_PROBE
  19         select GENERIC_PCI_IOMAP
  20         select ARCH_HAVE_NMI_SAFE_CMPXCHG
  21         select GENERIC_SMP_IDLE_THREAD
  22         select GENERIC_STRNCPY_FROM_USER
  23         select SYSCTL_ARCH_UNALIGN_ALLOW
  24         select HAVE_MOD_ARCH_SPECIFIC
  25         select VIRT_TO_BUS
  26         select MODULES_USE_ELF_RELA
  27         select CLONE_BACKWARDS
  28         select TTY # Needed for pdc_cons.c
  29         select HAVE_DEBUG_STACKOVERFLOW
  30
  31         help
  32           The PA-RISC microprocessor is designed by Hewlett-Packard and used
  33           in many of their workstations & servers (HP9000 700 and 800 series,
  34           and later HP3000 series).  The PA-RISC Linux project home page is
  35           at <http://www.parisc-linux.org/>.
  36
  37 config MMU
  38         def_bool y
  39
  40 config STACK_GROWSUP
  41         def_bool y
  42
  43 config GENERIC_LOCKBREAK
  44         bool
  45         default y
  46         depends on SMP && PREEMPT
  47
  48 config RWSEM_GENERIC_SPINLOCK
  49         def_bool y
  50
  51 config RWSEM_XCHGADD_ALGORITHM
  52         bool
  53
  54 config ARCH_HAS_ILOG2_U32
  55         bool
  56         default n
  57
  58 config ARCH_HAS_ILOG2_U64
  59         bool
  60         default n
  61
  62 config GENERIC_BUG
  63         bool
  64         default y
  65         depends on BUG
  66
  67 config GENERIC_HWEIGHT
  68         bool
  69         default y
  70
  71 config GENERIC_CALIBRATE_DELAY
  72         bool
  73         default y
  74
  75 config TIME_LOW_RES
  76         bool
  77         depends on SMP
  78         default y
  79
  80 config HAVE_LATENCYTOP_SUPPORT
  81         def_bool y
  82
  83 # unless you want to implement ACPI on PA-RISC ... ;-)
  84 config PM
  85         bool
  86
  87 config STACKTRACE_SUPPORT
  88         def_bool y
  89
  90 config NEED_DMA_MAP_STATE
  91         def_bool y
  92
  93 config NEED_SG_DMA_LENGTH
  94         def_bool y
  95
  96 config ISA_DMA_API
  97         bool
  98
  99 config ARCH_MAY_HAVE_PC_FDC
 100         bool
 101         depends on BROKEN
 102         default y
 103
 104 source "init/Kconfig"
 105
 106 source "kernel/Kconfig.freezer"
 107
 108
 109 menu "Processor type and features"
 110
 111 choice
 112         prompt "Processor type"
 113         default PA7000
 114
 115 config PA7000
 116         bool "PA7000/PA7100"
 117         ---help---
 118           This is the processor type of your CPU.  This information is
 119           used for optimizing purposes.  In order to compile a kernel
 120           that can run on all 32-bit PA CPUs (albeit not optimally fast),
 121           you can specify "PA7000" here.
 122
 123           Specifying "PA8000" here will allow you to select a 64-bit kernel
 124           which is required on some machines.
 125
 126 config PA7100LC
 127         bool "PA7100LC"
 128         help
 129           Select this option for the PCX-L processor, as used in the
 130           712, 715/64, 715/80, 715/100, 715/100XC, 725/100, 743, 748,
 131           D200, D210, D300, D310 and E-class
 132
 133 config PA7200
 134         bool "PA7200"
 135         help
 136           Select this option for the PCX-T' processor, as used in the
 137           C100, C110, J100, J110, J210XC, D250, D260, D350, D360,
 138           K100, K200, K210, K220, K400, K410 and K420
 139
 140 config PA7300LC
 141         bool "PA7300LC"
 142         help
 143           Select this option for the PCX-L2 processor, as used in the
 144           744, A180, B132L, B160L, B180L, C132L, C160L, C180L,
 145           D220, D230, D320 and D330.
 146
 147 config PA8X00
 148         bool "PA8000 and up"
 149         help
 150           Select this option for PCX-U to PCX-W2 processors.
 151
 152 endchoice
 153
 154 # Define implied options from the CPU selection here
 155
 156 config PA20
 157         def_bool y
 158         depends on PA8X00
 159
 160 config PA11
 161         def_bool y
 162         depends on PA7000 || PA7100LC || PA7200 || PA7300LC
 163
 164 config PREFETCH
 165         def_bool y
 166         depends on PA8X00 || PA7200
 167
 168 config MLONGCALLS
 169         bool "Enable the -mlong-calls compiler option for big kernels"
 170         def_bool y if (!MODULES)
 171         depends on PA8X00
 172         help
 173           If you configure the kernel to include many drivers built-in instead
 174           as modules, the kernel executable may become too big, so that the
 175           linker will not be able to resolve some long branches and fails to link
 176           your vmlinux kernel. In that case enabling this option will help you
 177           to overcome this limit by using the -mlong-calls compiler option.
 178
 179           Usually you want to say N here, unless you e.g. want to build
 180           a kernel which includes all necessary drivers built-in and which can
 181           be used for TFTP booting without the need to have an initrd ramdisk.
 182
 183           Enabling this option will probably slow down your kernel.
 184
 185 config 64BIT
 186         bool "64-bit kernel"
 187         depends on PA8X00
 188         help
 189           Enable this if you want to support 64bit kernel on PA-RISC platform.
 190
 191           At the moment, only people willing to use more than 2GB of RAM,
 192           or having a 64bit-only capable PA-RISC machine should say Y here.
 193
 194           Since there is no 64bit userland on PA-RISC, there is no point to
 195           enable this option otherwise. The 64bit kernel is significantly bigger
 196           and slower than the 32bit one.
 197
 198 choice
 199         prompt "Kernel page size"
 200         default PARISC_PAGE_SIZE_4KB
 201
 202 config PARISC_PAGE_SIZE_4KB
 203         bool "4KB"
 204         help
 205           This lets you select the page size of the kernel.  For best
 206           performance, a page size of 16KB is recommended.  For best
 207           compatibility with 32bit applications, a page size of 4KB should be
 208           selected (the vast majority of 32bit binaries work perfectly fine
 209           with a larger page size).
 210
 211           4KB                For best 32bit compatibility
 212           16KB               For best performance
 213           64KB               For best performance, might give more overhead.
 214
 215           If you don't know what to do, choose 4KB.
 216
 217 config PARISC_PAGE_SIZE_16KB
 218         bool "16KB"
 219         depends on PA8X00
 220
 221 config PARISC_PAGE_SIZE_64KB
 222         bool "64KB"
 223         depends on PA8X00
 224
 225 endchoice
 226
 227 config SMP
 228         bool "Symmetric multi-processing support"
 229         select USE_GENERIC_SMP_HELPERS
 230         ---help---
 231           This enables support for systems with more than one CPU. If you have
 232           a system with only one CPU, like most personal computers, say N. If
 233           you have a system with more than one CPU, say Y.
 234
 235           If you say N here, the kernel will run on single and multiprocessor
 236           machines, but will use only one CPU of a multiprocessor machine. If
 237           you say Y here, the kernel will run on many, but not all,
 238           singleprocessor machines. On a singleprocessor machine, the kernel
 239           will run faster if you say N here.
 240
 241           See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO
 242           available at <http://www.tldp.org/docs.html#howto>.
 243
 244           If you don't know what to do here, say N.
 245
 246 config IRQSTACKS
 247         bool "Use separate kernel stacks when processing interrupts"
 248         default y
 249         help
 250           If you say Y here the kernel will use separate kernel stacks
 251           for handling hard and soft interrupts.  This can help avoid
 252           overflowing the process kernel stacks.
 253
 254 config HOTPLUG_CPU
 255         bool
 256         default y if SMP
 257
 258 config ARCH_SELECT_MEMORY_MODEL
 259         def_bool y
 260         depends on 64BIT
 261
 262 config ARCH_DISCONTIGMEM_ENABLE
 263         def_bool y
 264         depends on 64BIT
 265
 266 config ARCH_FLATMEM_ENABLE
 267         def_bool y
 268
 269 config ARCH_DISCONTIGMEM_DEFAULT
 270         def_bool y
 271         depends on ARCH_DISCONTIGMEM_ENABLE
 272
 273 config NODES_SHIFT
 274         int
 275         default "3"
 276         depends on NEED_MULTIPLE_NODES
 277
 278 source "kernel/Kconfig.preempt"
 279 source "kernel/Kconfig.hz"
 280 source "mm/Kconfig"
 281
 282 config COMPAT
 283         def_bool y
 284         depends on 64BIT
 285
 286 config SYSVIPC_COMPAT
 287         def_bool y
 288         depends on COMPAT && SYSVIPC
 289
 290 config AUDIT_ARCH
 291         def_bool y
 292
 293 config HPUX
 294         bool "Support for HP-UX binaries"
 295         depends on !64BIT
 296
 297 config NR_CPUS
 298         int "Maximum number of CPUs (2-32)"
 299         range 2 32
 300         depends on SMP
 301         default "32"
 302
 303 endmenu
 304
 305
 306 source "drivers/parisc/Kconfig"
 307
 308
 309 menu "Executable file formats"
 310
 311 source "fs/Kconfig.binfmt"
 312
 313 endmenu
 314
 315 source "net/Kconfig"
 316
 317 source "drivers/Kconfig"
 318
 319 source "fs/Kconfig"
 320
 321 source "arch/parisc/Kconfig.debug"
 322
 323 source "security/Kconfig"
 324
 325 source "crypto/Kconfig"
 326
 327 source "lib/Kconfig"