arch/powerpc/boot/dts/fsl/p4080si-post.dtsi

   1 /*
   2  * P4080/P4040 Silicon/SoC Device Tree Source (post include)
   3  *
   4  * Copyright 2011 - 2014 Freescale Semiconductor Inc.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions are met:
   8  *     * Redistributions of source code must retain the above copyright
   9  *       notice, this list of conditions and the following disclaimer.
  10  *     * Redistributions in binary form must reproduce the above copyright
  11  *       notice, this list of conditions and the following disclaimer in the
  12  *       documentation and/or other materials provided with the distribution.
  13  *     * Neither the name of Freescale Semiconductor nor the
  14  *       names of its contributors may be used to endorse or promote products
  15  *       derived from this software without specific prior written permission.
  16  *
  17  *
  18  * ALTERNATIVELY, this software may be distributed under the terms of the
  19  * GNU General Public License ("GPL") as published by the Free Software
  20  * Foundation, either version 2 of that License or (at your option) any
  21  * later version.
  22  *
  23  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
  24  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  25  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  26  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  30  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  32  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  33  */
  34
  35 &bman_fbpr {
  36         compatible = "fsl,bman-fbpr";
  37         alloc-ranges = <0 0 0x10 0>;
  38 };
  39
  40 &lbc {
  41         compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus";
  42         interrupts = <25 2 0 0>;
  43         #address-cells = <2>;
  44         #size-cells = <1>;
  45 };
  46
  47 /* controller at 0x200000 */
  48 &pci0 {
  49         compatible = "fsl,p4080-pcie", "fsl,qoriq-pcie-v2.1";
  50         device_type = "pci";
  51         #size-cells = <2>;
  52         #address-cells = <3>;
  53         bus-range = <0x0 0xff>;
  54         clock-frequency = <33333333>;
  55         interrupts = <16 2 1 15>;
  56         fsl,iommu-parent = <&pamu0>;
  57         fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */
  58         pcie@0 {
  59                 reg = <0 0 0 0 0>;
  60                 #interrupt-cells = <1>;
  61                 #size-cells = <2>;
  62                 #address-cells = <3>;
  63                 device_type = "pci";
  64                 interrupts = <16 2 1 15>;
  65                 interrupt-map-mask = <0xf800 0 0 7>;
  66                 interrupt-map = <
  67                         /* IDSEL 0x0 */
  68                         0000 0 0 1 &mpic 40 1 0 0
  69                         0000 0 0 2 &mpic 1 1 0 0
  70                         0000 0 0 3 &mpic 2 1 0 0
  71                         0000 0 0 4 &mpic 3 1 0 0
  72                         >;
  73         };
  74 };
  75
  76 /* controller at 0x201000 */
  77 &pci1 {
  78         compatible = "fsl,p4080-pcie", "fsl,qoriq-pcie-v2.1";
  79         device_type = "pci";
  80         #size-cells = <2>;
  81         #address-cells = <3>;
  82         bus-range = <0 0xff>;
  83         clock-frequency = <33333333>;
  84         interrupts = <16 2 1 14>;
  85         fsl,iommu-parent = <&pamu0>;
  86         fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */
  87         pcie@0 {
  88                 reg = <0 0 0 0 0>;
  89                 #interrupt-cells = <1>;
  90                 #size-cells = <2>;
  91                 #address-cells = <3>;
  92                 device_type = "pci";
  93                 interrupts = <16 2 1 14>;
  94                 interrupt-map-mask = <0xf800 0 0 7>;
  95                 interrupt-map = <
  96                         /* IDSEL 0x0 */
  97                         0000 0 0 1 &mpic 41 1 0 0
  98                         0000 0 0 2 &mpic 5 1 0 0
  99                         0000 0 0 3 &mpic 6 1 0 0
 100                         0000 0 0 4 &mpic 7 1 0 0
 101                         >;
 102         };
 103 };
 104
 105 /* controller at 0x202000 */
 106 &pci2 {
 107         compatible = "fsl,p4080-pcie", "fsl,qoriq-pcie-v2.1";
 108         device_type = "pci";
 109         #size-cells = <2>;
 110         #address-cells = <3>;
 111         bus-range = <0x0 0xff>;
 112         clock-frequency = <33333333>;
 113         interrupts = <16 2 1 13>;
 114         fsl,iommu-parent = <&pamu0>;
 115         fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */
 116         pcie@0 {
 117                 reg = <0 0 0 0 0>;
 118                 #interrupt-cells = <1>;
 119                 #size-cells = <2>;
 120                 #address-cells = <3>;
 121                 device_type = "pci";
 122                 interrupts = <16 2 1 13>;
 123                 interrupt-map-mask = <0xf800 0 0 7>;
 124                 interrupt-map = <
 125                         /* IDSEL 0x0 */
 126                         0000 0 0 1 &mpic 42 1 0 0
 127                         0000 0 0 2 &mpic 9 1 0 0
 128                         0000 0 0 3 &mpic 10 1 0 0
 129                         0000 0 0 4 &mpic 11 1 0 0
 130                         >;
 131         };
 132 };
 133
 134 &rio {
 135         compatible = "fsl,srio";
 136         interrupts = <16 2 1 11>;
 137         #address-cells = <2>;
 138         #size-cells = <2>;
 139         fsl,srio-rmu-handle = <&rmu>;
 140         fsl,iommu-parent = <&pamu0>;
 141         ranges;
 142
 143         port1 {
 144                 #address-cells = <2>;
 145                 #size-cells = <2>;
 146                 cell-index = <1>;
 147                 fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
 148         };
 149
 150         port2 {
 151                 #address-cells = <2>;
 152                 #size-cells = <2>;
 153                 cell-index = <2>;
 154                 fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
 155         };
 156 };
 157
 158 &dcsr {
 159         #address-cells = <1>;
 160         #size-cells = <1>;
 161         compatible = "fsl,dcsr", "simple-bus";
 162
 163         dcsr-epu@0 {
 164                 compatible = "fsl,p4080-dcsr-epu", "fsl,dcsr-epu";
 165                 interrupts = <52 2 0 0
 166                               84 2 0 0
 167                               85 2 0 0>;
 168                 reg = <0x0 0x1000>;
 169         };
 170         dcsr-npc {
 171                 compatible = "fsl,dcsr-npc";
 172                 reg = <0x1000 0x1000 0x1000000 0x8000>;
 173         };
 174         dcsr-nxc@2000 {
 175                 compatible = "fsl,dcsr-nxc";
 176                 reg = <0x2000 0x1000>;
 177         };
 178         dcsr-corenet {
 179                 compatible = "fsl,dcsr-corenet";
 180                 reg = <0x8000 0x1000 0xB0000 0x1000>;
 181         };
 182         dcsr-dpaa@9000 {
 183                 compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
 184                 reg = <0x9000 0x1000>;
 185         };
 186         dcsr-ocn@11000 {
 187                 compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
 188                 reg = <0x11000 0x1000>;
 189         };
 190         dcsr-ddr@12000 {
 191                 compatible = "fsl,dcsr-ddr";
 192                 dev-handle = <&ddr1>;
 193                 reg = <0x12000 0x1000>;
 194         };
 195         dcsr-ddr@13000 {
 196                 compatible = "fsl,dcsr-ddr";
 197                 dev-handle = <&ddr2>;
 198                 reg = <0x13000 0x1000>;
 199         };
 200         dcsr-nal@18000 {
 201                 compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
 202                 reg = <0x18000 0x1000>;
 203         };
 204         dcsr-rcpm@22000 {
 205                 compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
 206                 reg = <0x22000 0x1000>;
 207         };
 208         dcsr-cpu-sb-proxy@40000 {
 209                 compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 210                 cpu-handle = <&cpu0>;
 211                 reg = <0x40000 0x1000>;
 212         };
 213         dcsr-cpu-sb-proxy@41000 {
 214                 compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 215                 cpu-handle = <&cpu1>;
 216                 reg = <0x41000 0x1000>;
 217         };
 218         dcsr-cpu-sb-proxy@42000 {
 219                 compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 220                 cpu-handle = <&cpu2>;
 221                 reg = <0x42000 0x1000>;
 222         };
 223         dcsr-cpu-sb-proxy@43000 {
 224                 compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 225                 cpu-handle = <&cpu3>;
 226                 reg = <0x43000 0x1000>;
 227         };
 228         dcsr-cpu-sb-proxy@44000 {
 229                 compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 230                 cpu-handle = <&cpu4>;
 231                 reg = <0x44000 0x1000>;
 232         };
 233         dcsr-cpu-sb-proxy@45000 {
 234                 compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 235                 cpu-handle = <&cpu5>;
 236                 reg = <0x45000 0x1000>;
 237         };
 238         dcsr-cpu-sb-proxy@46000 {
 239                 compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 240                 cpu-handle = <&cpu6>;
 241                 reg = <0x46000 0x1000>;
 242         };
 243         dcsr-cpu-sb-proxy@47000 {
 244                 compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 245                 cpu-handle = <&cpu7>;
 246                 reg = <0x47000 0x1000>;
 247         };
 248
 249 };
 250
 251 /include/ "qoriq-bman1-portals.dtsi"
 252
 253 &soc {
 254         #address-cells = <1>;
 255         #size-cells = <1>;
 256         device_type = "soc";
 257         compatible = "simple-bus";
 258
 259         soc-sram-error {
 260                 compatible = "fsl,soc-sram-error";
 261                 interrupts = <16 2 1 29>;
 262         };
 263
 264         corenet-law@0 {
 265                 compatible = "fsl,corenet-law";
 266                 reg = <0x0 0x1000>;
 267                 fsl,num-laws = <32>;
 268         };
 269
 270         ddr1: memory-controller@8000 {
 271                 compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
 272                 reg = <0x8000 0x1000>;
 273                 interrupts = <16 2 1 23>;
 274         };
 275
 276         ddr2: memory-controller@9000 {
 277                 compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller";
 278                 reg = <0x9000 0x1000>;
 279                 interrupts = <16 2 1 22>;
 280         };
 281
 282         cpc: l3-cache-controller@10000 {
 283                 compatible = "fsl,p4080-l3-cache-controller", "cache";
 284                 reg = <0x10000 0x1000
 285                        0x11000 0x1000>;
 286                 interrupts = <16 2 1 27
 287                               16 2 1 26>;
 288         };
 289
 290         corenet-cf@18000 {
 291                 compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
 292                 reg = <0x18000 0x1000>;
 293                 interrupts = <16 2 1 31>;
 294                 fsl,ccf-num-csdids = <32>;
 295                 fsl,ccf-num-snoopids = <32>;
 296         };
 297
 298         iommu@20000 {
 299                 compatible = "fsl,pamu-v1.0", "fsl,pamu";
 300                 reg = <0x20000 0x5000>; /* for compatibility with older PAMU drivers */
 301                 ranges = <0 0x20000 0x5000>;
 302                 #address-cells = <1>;
 303                 #size-cells = <1>;
 304                 interrupts = <
 305                         24 2 0 0
 306                         16 2 1 30>;
 307                 fsl,portid-mapping = <0x00f80000>;
 308
 309                 pamu0: pamu@0 {
 310                         reg = <0 0x1000>;
 311                         fsl,primary-cache-geometry = <32 1>;
 312                         fsl,secondary-cache-geometry = <128 2>;
 313                 };
 314
 315                 pamu1: pamu@1000 {
 316                         reg = <0x1000 0x1000>;
 317                         fsl,primary-cache-geometry = <32 1>;
 318                         fsl,secondary-cache-geometry = <128 2>;
 319                 };
 320
 321                 pamu2: pamu@2000 {
 322                         reg = <0x2000 0x1000>;
 323                         fsl,primary-cache-geometry = <32 1>;
 324                         fsl,secondary-cache-geometry = <128 2>;
 325                 };
 326
 327                 pamu3: pamu@3000 {
 328                         reg = <0x3000 0x1000>;
 329                         fsl,primary-cache-geometry = <32 1>;
 330                         fsl,secondary-cache-geometry = <128 2>;
 331                 };
 332
 333                 pamu4: pamu@4000 {
 334                         reg = <0x4000 0x1000>;
 335                         fsl,primary-cache-geometry = <32 1>;
 336                         fsl,secondary-cache-geometry = <128 2>;
 337                 };
 338         };
 339
 340 /include/ "qoriq-rmu-0.dtsi"
 341         rmu@d3000 {
 342                 fsl,iommu-parent = <&pamu0>;
 343                 fsl,liodn-reg = <&guts 0x540>; /* RMULIODNR */
 344         };
 345
 346 /include/ "qoriq-mpic.dtsi"
 347
 348         guts: global-utilities@e0000 {
 349                 compatible = "fsl,qoriq-device-config-1.0";
 350                 reg = <0xe0000 0xe00>;
 351                 fsl,has-rstcr;
 352                 #sleep-cells = <1>;
 353                 fsl,liodn-bits = <12>;
 354         };
 355
 356         pins: global-utilities@e0e00 {
 357                 compatible = "fsl,qoriq-pin-control-1.0";
 358                 reg = <0xe0e00 0x200>;
 359                 #sleep-cells = <2>;
 360         };
 361
 362 /include/ "qoriq-clockgen1.dtsi"
 363         global-utilities@e1000 {
 364                 compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
 365
 366                 pll2: pll2@840 {
 367                         #clock-cells = <1>;
 368                         reg = <0x840 0x4>;
 369                         compatible = "fsl,qoriq-core-pll-1.0";
 370                         clocks = <&sysclk>;
 371                         clock-output-names = "pll2", "pll2-div2";
 372                 };
 373
 374                 pll3: pll3@860 {
 375                         #clock-cells = <1>;
 376                         reg = <0x860 0x4>;
 377                         compatible = "fsl,qoriq-core-pll-1.0";
 378                         clocks = <&sysclk>;
 379                         clock-output-names = "pll3", "pll3-div2";
 380                 };
 381
 382                 mux2: mux2@40 {
 383                         #clock-cells = <0>;
 384                         reg = <0x40 0x4>;
 385                         compatible = "fsl,qoriq-core-mux-1.0";
 386                         clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
 387                         clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
 388                         clock-output-names = "cmux2";
 389                 };
 390
 391                 mux3: mux3@60 {
 392                         #clock-cells = <0>;
 393                         reg = <0x60 0x4>;
 394                         compatible = "fsl,qoriq-core-mux-1.0";
 395                         clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
 396                         clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
 397                         clock-output-names = "cmux3";
 398                 };
 399
 400                 mux4: mux4@80 {
 401                         #clock-cells = <0>;
 402                         reg = <0x80 0x4>;
 403                         compatible = "fsl,qoriq-core-mux-1.0";
 404                         clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
 405                         clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
 406                         clock-output-names = "cmux4";
 407                 };
 408
 409                 mux5: mux5@a0 {
 410                         #clock-cells = <0>;
 411                         reg = <0xa0 0x4>;
 412                         compatible = "fsl,qoriq-core-mux-1.0";
 413                         clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
 414                         clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
 415                         clock-output-names = "cmux5";
 416                 };
 417
 418                 mux6: mux6@c0 {
 419                         #clock-cells = <0>;
 420                         reg = <0xc0 0x4>;
 421                         compatible = "fsl,qoriq-core-mux-1.0";
 422                         clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
 423                         clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
 424                         clock-output-names = "cmux6";
 425                 };
 426
 427                 mux7: mux7@e0 {
 428                         #clock-cells = <0>;
 429                         reg = <0xe0 0x4>;
 430                         compatible = "fsl,qoriq-core-mux-1.0";
 431                         clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
 432                         clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
 433                         clock-output-names = "cmux7";
 434                 };
 435         };
 436
 437         rcpm: global-utilities@e2000 {
 438                 compatible = "fsl,qoriq-rcpm-1.0";
 439                 reg = <0xe2000 0x1000>;
 440                 #sleep-cells = <1>;
 441         };
 442
 443         sfp: sfp@e8000 {
 444                 compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0";
 445                 reg        = <0xe8000 0x1000>;
 446         };
 447
 448         serdes: serdes@ea000 {
 449                 compatible = "fsl,p4080-serdes";
 450                 reg        = <0xea000 0x1000>;
 451         };
 452
 453 /include/ "qoriq-dma-0.dtsi"
 454         dma@100300 {
 455                 fsl,iommu-parent = <&pamu0>;
 456                 fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
 457         };
 458
 459 /include/ "qoriq-dma-1.dtsi"
 460         dma@101300 {
 461                 fsl,iommu-parent = <&pamu0>;
 462                 fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
 463         };
 464
 465 /include/ "qoriq-espi-0.dtsi"
 466         spi@110000 {
 467                 fsl,espi-num-chipselects = <4>;
 468         };
 469
 470 /include/ "qoriq-esdhc-0.dtsi"
 471         sdhc@114000 {
 472                 compatible = "fsl,p4080-esdhc", "fsl,esdhc";
 473                 fsl,iommu-parent = <&pamu1>;
 474                 fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
 475                 voltage-ranges = <3300 3300>;
 476                 sdhci,auto-cmd12;
 477         };
 478
 479 /include/ "qoriq-i2c-0.dtsi"
 480 /include/ "qoriq-i2c-1.dtsi"
 481 /include/ "qoriq-duart-0.dtsi"
 482 /include/ "qoriq-duart-1.dtsi"
 483 /include/ "qoriq-gpio-0.dtsi"
 484 /include/ "qoriq-usb2-mph-0.dtsi"
 485         usb@210000 {
 486                 compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
 487                 fsl,iommu-parent = <&pamu1>;
 488                 fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
 489                 port0;
 490         };
 491 /include/ "qoriq-usb2-dr-0.dtsi"
 492         usb@211000 {
 493                 compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
 494                 fsl,iommu-parent = <&pamu1>;
 495                 fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
 496         };
 497 /include/ "qoriq-sec4.0-0.dtsi"
 498 crypto: crypto@300000 {
 499                 fsl,iommu-parent = <&pamu1>;
 500         };
 501
 502 /include/ "qoriq-bman1.dtsi"
 503 };