arch/powerpc/boot/dts/mpc836x_rdk.dts

   1 /*
   2  * MPC8360E RDK Device Tree Source
   3  *
   4  * Copyright 2006 Freescale Semiconductor Inc.
   5  * Copyright 2007-2008 MontaVista Software, Inc.
   6  *
   7  * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
   8  *
   9  * This program is free software; you can redistribute  it and/or modify it
  10  * under  the terms of  the GNU General  Public License as published by the
  11  * Free Software Foundation;  either version 2 of the  License, or (at your
  12  * option) any later version.
  13  */
  14
  15 /dts-v1/;
  16
  17 / {
  18         #address-cells = <1>;
  19         #size-cells = <1>;
  20         compatible = "fsl,mpc8360rdk";
  21
  22         aliases {
  23                 serial0 = &serial0;
  24                 serial1 = &serial1;
  25                 serial2 = &serial2;
  26                 serial3 = &serial3;
  27                 ethernet0 = &enet0;
  28                 ethernet1 = &enet1;
  29                 ethernet2 = &enet2;
  30                 ethernet3 = &enet3;
  31                 pci0 = &pci0;
  32         };
  33
  34         cpus {
  35                 #address-cells = <1>;
  36                 #size-cells = <0>;
  37
  38                 PowerPC,8360@0 {
  39                         device_type = "cpu";
  40                         reg = <0>;
  41                         d-cache-line-size = <32>;
  42                         i-cache-line-size = <32>;
  43                         d-cache-size = <32768>;
  44                         i-cache-size = <32768>;
  45                         /* filled by u-boot */
  46                         timebase-frequency = <0>;
  47                         bus-frequency = <0>;
  48                         clock-frequency = <0>;
  49                 };
  50         };
  51
  52         memory {
  53                 device_type = "memory";
  54                 /* filled by u-boot */
  55                 reg = <0 0>;
  56         };
  57
  58         soc@e0000000 {
  59                 #address-cells = <1>;
  60                 #size-cells = <1>;
  61                 device_type = "soc";
  62                 compatible = "fsl,mpc8360-immr", "fsl,immr", "fsl,soc",
  63                              "simple-bus";
  64                 ranges = <0 0xe0000000 0x200000>;
  65                 reg = <0xe0000000 0x200>;
  66                 /* filled by u-boot */
  67                 bus-frequency = <0>;
  68
  69                 wdt@200 {
  70                         compatible = "mpc83xx_wdt";
  71                         reg = <0x200 0x100>;
  72                 };
  73
  74                 i2c@3000 {
  75                         #address-cells = <1>;
  76                         #size-cells = <0>;
  77                         cell-index = <0>;
  78                         compatible = "fsl-i2c";
  79                         reg = <0x3000 0x100>;
  80                         interrupts = <14 8>;
  81                         interrupt-parent = <&ipic>;
  82                         dfsrr;
  83                 };
  84
  85                 i2c@3100 {
  86                         #address-cells = <1>;
  87                         #size-cells = <0>;
  88                         cell-index = <1>;
  89                         compatible = "fsl-i2c";
  90                         reg = <0x3100 0x100>;
  91                         interrupts = <16 8>;
  92                         interrupt-parent = <&ipic>;
  93                         dfsrr;
  94                 };
  95
  96                 serial0: serial@4500 {
  97                         device_type = "serial";
  98                         compatible = "ns16550";
  99                         reg = <0x4500 0x100>;
 100                         interrupts = <9 8>;
 101                         interrupt-parent = <&ipic>;
 102                         /* filled by u-boot */
 103                         clock-frequency = <0>;
 104                 };
 105
 106                 serial1: serial@4600 {
 107                         device_type = "serial";
 108                         compatible = "ns16550";
 109                         reg = <0x4600 0x100>;
 110                         interrupts = <10 8>;
 111                         interrupt-parent = <&ipic>;
 112                         /* filled by u-boot */
 113                         clock-frequency = <0>;
 114                 };
 115
 116                 dma@82a8 {
 117                         #address-cells = <1>;
 118                         #size-cells = <1>;
 119                         compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
 120                         reg = <0x82a8 4>;
 121                         ranges = <0 0x8100 0x1a8>;
 122                         interrupt-parent = <&ipic>;
 123                         interrupts = <71 8>;
 124                         cell-index = <0>;
 125                         dma-channel@0 {
 126                                 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
 127                                 reg = <0 0x80>;
 128                                 cell-index = <0>;
 129                                 interrupt-parent = <&ipic>;
 130                                 interrupts = <71 8>;
 131                         };
 132                         dma-channel@80 {
 133                                 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
 134                                 reg = <0x80 0x80>;
 135                                 cell-index = <1>;
 136                                 interrupt-parent = <&ipic>;
 137                                 interrupts = <71 8>;
 138                         };
 139                         dma-channel@100 {
 140                                 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
 141                                 reg = <0x100 0x80>;
 142                                 cell-index = <2>;
 143                                 interrupt-parent = <&ipic>;
 144                                 interrupts = <71 8>;
 145                         };
 146                         dma-channel@180 {
 147                                 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
 148                                 reg = <0x180 0x28>;
 149                                 cell-index = <3>;
 150                                 interrupt-parent = <&ipic>;
 151                                 interrupts = <71 8>;
 152                         };
 153                 };
 154
 155                 crypto@30000 {
 156                         compatible = "fsl,sec2.0";
 157                         reg = <0x30000 0x10000>;
 158                         interrupts = <11 0x8>;
 159                         interrupt-parent = <&ipic>;
 160                         fsl,num-channels = <4>;
 161                         fsl,channel-fifo-len = <24>;
 162                         fsl,exec-units-mask = <0x7e>;
 163                         fsl,descriptor-types-mask = <0x01010ebf>;
 164                 };
 165
 166                 ipic: interrupt-controller@700 {
 167                         #address-cells = <0>;
 168                         #interrupt-cells = <2>;
 169                         compatible = "fsl,pq2pro-pic", "fsl,ipic";
 170                         interrupt-controller;
 171                         reg = <0x700 0x100>;
 172                 };
 173
 174                 qe_pio_b: gpio-controller@1418 {
 175                         #gpio-cells = <2>;
 176                         compatible = "fsl,mpc8360-qe-pario-bank",
 177                                      "fsl,mpc8323-qe-pario-bank";
 178                         reg = <0x1418 0x18>;
 179                         gpio-controller;
 180                 };
 181
 182                 qe_pio_e: gpio-controller@1460 {
 183                         #gpio-cells = <2>;
 184                         compatible = "fsl,mpc8360-qe-pario-bank",
 185                                      "fsl,mpc8323-qe-pario-bank";
 186                         reg = <0x1460 0x18>;
 187                         gpio-controller;
 188                 };
 189
 190                 qe@100000 {
 191                         #address-cells = <1>;
 192                         #size-cells = <1>;
 193                         device_type = "qe";
 194                         compatible = "fsl,qe", "simple-bus";
 195                         ranges = <0 0x100000 0x100000>;
 196                         reg = <0x100000 0x480>;
 197                         /* filled by u-boot */
 198                         clock-frequency = <0>;
 199                         bus-frequency = <0>;
 200                         brg-frequency = <0>;
 201
 202                         muram@10000 {
 203                                 #address-cells = <1>;
 204                                 #size-cells = <1>;
 205                                 compatible = "fsl,qe-muram", "fsl,cpm-muram";
 206                                 ranges = <0 0x10000 0xc000>;
 207
 208                                 data-only@0 {
 209                                         compatible = "fsl,qe-muram-data",
 210                                                      "fsl,cpm-muram-data";
 211                                         reg = <0 0xc000>;
 212                                 };
 213                         };
 214
 215                         timer@440 {
 216                                 compatible = "fsl,mpc8360-qe-gtm",
 217                                              "fsl,qe-gtm", "fsl,gtm";
 218                                 reg = <0x440 0x40>;
 219                                 interrupts = <12 13 14 15>;
 220                                 interrupt-parent = <&qeic>;
 221                                 clock-frequency = <166666666>;
 222                         };
 223
 224                         usb@6c0 {
 225                                 compatible = "fsl,mpc8360-qe-usb",
 226                                              "fsl,mpc8323-qe-usb";
 227                                 reg = <0x6c0 0x40 0x8b00 0x100>;
 228                                 interrupts = <11>;
 229                                 interrupt-parent = <&qeic>;
 230                                 fsl,fullspeed-clock = "clk21";
 231                                 gpios = <&qe_pio_b  2 0 /* USBOE */
 232                                          &qe_pio_b  3 0 /* USBTP */
 233                                          &qe_pio_b  8 0 /* USBTN */
 234                                          &qe_pio_b  9 0 /* USBRP */
 235                                          &qe_pio_b 11 0 /* USBRN */
 236                                          &qe_pio_e 20 0 /* SPEED */
 237                                          &qe_pio_e 21 1 /* POWER */>;
 238                         };
 239
 240                         spi@4c0 {
 241                                 cell-index = <0>;
 242                                 compatible = "fsl,spi";
 243                                 reg = <0x4c0 0x40>;
 244                                 interrupts = <2>;
 245                                 interrupt-parent = <&qeic>;
 246                                 mode = "cpu-qe";
 247                         };
 248
 249                         spi@500 {
 250                                 cell-index = <1>;
 251                                 compatible = "fsl,spi";
 252                                 reg = <0x500 0x40>;
 253                                 interrupts = <1>;
 254                                 interrupt-parent = <&qeic>;
 255                                 mode = "cpu-qe";
 256                         };
 257
 258                         enet0: ucc@2000 {
 259                                 device_type = "network";
 260                                 compatible = "ucc_geth";
 261                                 cell-index = <1>;
 262                                 reg = <0x2000 0x200>;
 263                                 interrupts = <32>;
 264                                 interrupt-parent = <&qeic>;
 265                                 rx-clock-name = "none";
 266                                 tx-clock-name = "clk9";
 267                                 phy-handle = <&phy2>;
 268                                 phy-connection-type = "rgmii-rxid";
 269                                 /* filled by u-boot */
 270                                 local-mac-address = [ 00 00 00 00 00 00 ];
 271                         };
 272
 273                         enet1: ucc@3000 {
 274                                 device_type = "network";
 275                                 compatible = "ucc_geth";
 276                                 cell-index = <2>;
 277                                 reg = <0x3000 0x200>;
 278                                 interrupts = <33>;
 279                                 interrupt-parent = <&qeic>;
 280                                 rx-clock-name = "none";
 281                                 tx-clock-name = "clk4";
 282                                 phy-handle = <&phy4>;
 283                                 phy-connection-type = "rgmii-rxid";
 284                                 /* filled by u-boot */
 285                                 local-mac-address = [ 00 00 00 00 00 00 ];
 286                         };
 287
 288                         enet2: ucc@2600 {
 289                                 device_type = "network";
 290                                 compatible = "ucc_geth";
 291                                 cell-index = <7>;
 292                                 reg = <0x2600 0x200>;
 293                                 interrupts = <42>;
 294                                 interrupt-parent = <&qeic>;
 295                                 rx-clock-name = "clk20";
 296                                 tx-clock-name = "clk19";
 297                                 phy-handle = <&phy1>;
 298                                 phy-connection-type = "mii";
 299                                 /* filled by u-boot */
 300                                 local-mac-address = [ 00 00 00 00 00 00 ];
 301                         };
 302
 303                         enet3: ucc@3200 {
 304                                 device_type = "network";
 305                                 compatible = "ucc_geth";
 306                                 cell-index = <4>;
 307                                 reg = <0x3200 0x200>;
 308                                 interrupts = <35>;
 309                                 interrupt-parent = <&qeic>;
 310                                 rx-clock-name = "clk8";
 311                                 tx-clock-name = "clk7";
 312                                 phy-handle = <&phy3>;
 313                                 phy-connection-type = "mii";
 314                                 /* filled by u-boot */
 315                                 local-mac-address = [ 00 00 00 00 00 00 ];
 316                         };
 317
 318                         mdio@2120 {
 319                                 #address-cells = <1>;
 320                                 #size-cells = <0>;
 321                                 compatible = "fsl,ucc-mdio";
 322                                 reg = <0x2120 0x18>;
 323
 324                                 phy1: ethernet-phy@1 {
 325                                         device_type = "ethernet-phy";
 326                                         compatible = "national,DP83848VV";
 327                                         reg = <1>;
 328                                 };
 329
 330                                 phy2: ethernet-phy@2 {
 331                                         device_type = "ethernet-phy";
 332                                         compatible = "broadcom,BCM5481UA2KMLG";
 333                                         reg = <2>;
 334                                 };
 335
 336                                 phy3: ethernet-phy@3 {
 337                                         device_type = "ethernet-phy";
 338                                         compatible = "national,DP83848VV";
 339                                         reg = <3>;
 340                                 };
 341
 342                                 phy4: ethernet-phy@4 {
 343                                         device_type = "ethernet-phy";
 344                                         compatible = "broadcom,BCM5481UA2KMLG";
 345                                         reg = <4>;
 346                                 };
 347                         };
 348
 349                         serial2: ucc@2400 {
 350                                 device_type = "serial";
 351                                 compatible = "ucc_uart";
 352                                 reg = <0x2400 0x200>;
 353                                 cell-index = <5>;
 354                                 port-number = <0>;
 355                                 rx-clock-name = "brg7";
 356                                 tx-clock-name = "brg8";
 357                                 interrupts = <40>;
 358                                 interrupt-parent = <&qeic>;
 359                                 soft-uart;
 360                         };
 361
 362                         serial3: ucc@3400 {
 363                                 device_type = "serial";
 364                                 compatible = "ucc_uart";
 365                                 reg = <0x3400 0x200>;
 366                                 cell-index = <6>;
 367                                 port-number = <1>;
 368                                 rx-clock-name = "brg13";
 369                                 tx-clock-name = "brg14";
 370                                 interrupts = <41>;
 371                                 interrupt-parent = <&qeic>;
 372                                 soft-uart;
 373                         };
 374
 375                         qeic: interrupt-controller@80 {
 376                                 #address-cells = <0>;
 377                                 #interrupt-cells = <1>;
 378                                 compatible = "fsl,qe-ic";
 379                                 interrupt-controller;
 380                                 reg = <0x80 0x80>;
 381                                 big-endian;
 382                                 interrupts = <32 8 33 8>;
 383                                 interrupt-parent = <&ipic>;
 384                         };
 385                 };
 386         };
 387
 388         localbus@e0005000 {
 389                 #address-cells = <2>;
 390                 #size-cells = <1>;
 391                 compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
 392                              "simple-bus";
 393                 reg = <0xe0005000 0xd8>;
 394                 ranges = <0 0 0xff800000 0x0800000
 395                           1 0 0x60000000 0x0001000
 396                           2 0 0x70000000 0x4000000>;
 397
 398                 flash@0,0 {
 399                         compatible = "intel,PC28F640P30T85", "cfi-flash";
 400                         reg = <0 0 0x800000>;
 401                         bank-width = <2>;
 402                         device-width = <1>;
 403                 };
 404
 405                 upm@1,0 {
 406                         compatible = "fsl,upm-nand";
 407                         reg = <1 0 1>;
 408                         fsl,upm-addr-offset = <16>;
 409                         fsl,upm-cmd-offset = <8>;
 410                         gpios = <&qe_pio_e 18 0>;
 411
 412                         flash {
 413                                 compatible = "stm,nand512-a";
 414                         };
 415                 };
 416
 417                 display@2,0 {
 418                         device_type = "display";
 419                         compatible = "fujitsu,MB86277", "fujitsu,mint";
 420                         reg = <2 0 0x4000000>;
 421                         fujitsu,sh3;
 422                         little-endian;
 423                         /* filled by u-boot */
 424                         address = <0>;
 425                         depth = <0>;
 426                         width = <0>;
 427                         height = <0>;
 428                         linebytes = <0>;
 429                         /* linux,opened; - added by uboot */
 430                 };
 431         };
 432
 433         pci0: pci@e0008500 {
 434                 #address-cells = <3>;
 435                 #size-cells = <2>;
 436                 #interrupt-cells = <1>;
 437                 device_type = "pci";
 438                 compatible = "fsl,mpc8360-pci", "fsl,mpc8349-pci";
 439                 reg = <0xe0008500 0x100         /* internal registers */
 440                        0xe0008300 0x8>;         /* config space access registers */
 441                 ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
 442                           0x42000000 0 0x80000000 0x80000000 0 0x10000000
 443                           0x01000000 0 0xe0300000 0xe0300000 0 0x00100000>;
 444                 interrupts = <66 8>;
 445                 interrupt-parent = <&ipic>;
 446                 interrupt-map-mask = <0xf800 0 0 7>;
 447                 interrupt-map = </* miniPCI0 IDSEL 0x14 AD20 */
 448                                  0xa000 0 0 1 &ipic 18 8
 449                                  0xa000 0 0 2 &ipic 19 8
 450
 451                                  /* PCI1 IDSEL 0x15 AD21 */
 452                                  0xa800 0 0 1 &ipic 19 8
 453                                  0xa800 0 0 2 &ipic 20 8
 454                                  0xa800 0 0 3 &ipic 21 8
 455                                  0xa800 0 0 4 &ipic 18 8>;
 456                 /* filled by u-boot */
 457                 bus-range = <0 0>;
 458                 clock-frequency = <0>;
 459         };
 460 };