arch/powerpc/boot/dts/mpc8378_rdb.dts

   1 /*
   2  * MPC8378E RDB Device Tree Source
   3  *
   4  * Copyright 2007, 2008 Freescale Semiconductor Inc.
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10  */
  11
  12 /dts-v1/;
  13
  14 / {
  15         compatible = "fsl,mpc8378rdb";
  16         #address-cells = <1>;
  17         #size-cells = <1>;
  18
  19         aliases {
  20                 ethernet0 = &enet0;
  21                 ethernet1 = &enet1;
  22                 serial0 = &serial0;
  23                 serial1 = &serial1;
  24                 pci0 = &pci0;
  25                 pci1 = &pci1;
  26                 pci2 = &pci2;
  27         };
  28
  29         cpus {
  30                 #address-cells = <1>;
  31                 #size-cells = <0>;
  32
  33                 PowerPC,8378@0 {
  34                         device_type = "cpu";
  35                         reg = <0x0>;
  36                         d-cache-line-size = <32>;
  37                         i-cache-line-size = <32>;
  38                         d-cache-size = <32768>;
  39                         i-cache-size = <32768>;
  40                         timebase-frequency = <0>;
  41                         bus-frequency = <0>;
  42                         clock-frequency = <0>;
  43                 };
  44         };
  45
  46         memory {
  47                 device_type = "memory";
  48                 reg = <0x00000000 0x10000000>;  // 256MB at 0
  49         };
  50
  51         localbus@e0005000 {
  52                 #address-cells = <2>;
  53                 #size-cells = <1>;
  54                 compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus";
  55                 reg = <0xe0005000 0x1000>;
  56                 interrupts = <77 0x8>;
  57                 interrupt-parent = <&ipic>;
  58
  59                 // CS0 and CS1 are swapped when
  60                 // booting from nand, but the
  61                 // addresses are the same.
  62                 ranges = <0x0 0x0 0xfe000000 0x00800000
  63                           0x1 0x0 0xe0600000 0x00008000
  64                           0x2 0x0 0xf0000000 0x00020000
  65                           0x3 0x0 0xfa000000 0x00008000>;
  66
  67                 flash@0,0 {
  68                         #address-cells = <1>;
  69                         #size-cells = <1>;
  70                         compatible = "cfi-flash";
  71                         reg = <0x0 0x0 0x800000>;
  72                         bank-width = <2>;
  73                         device-width = <1>;
  74                 };
  75
  76                 nand@1,0 {
  77                         #address-cells = <1>;
  78                         #size-cells = <1>;
  79                         compatible = "fsl,mpc8378-fcm-nand",
  80                                      "fsl,elbc-fcm-nand";
  81                         reg = <0x1 0x0 0x8000>;
  82
  83                         u-boot@0 {
  84                                 reg = <0x0 0x100000>;
  85                                 read-only;
  86                         };
  87
  88                         kernel@100000 {
  89                                 reg = <0x100000 0x300000>;
  90                         };
  91                         fs@400000 {
  92                                 reg = <0x400000 0x1c00000>;
  93                         };
  94                 };
  95         };
  96
  97         immr@e0000000 {
  98                 #address-cells = <1>;
  99                 #size-cells = <1>;
 100                 device_type = "soc";
 101                 compatible = "simple-bus";
 102                 ranges = <0x0 0xe0000000 0x00100000>;
 103                 reg = <0xe0000000 0x00000200>;
 104                 bus-frequency = <0>;
 105
 106                 wdt@200 {
 107                         device_type = "watchdog";
 108                         compatible = "mpc83xx_wdt";
 109                         reg = <0x200 0x100>;
 110                 };
 111
 112                 gpio1: gpio-controller@c00 {
 113                         #gpio-cells = <2>;
 114                         compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio";
 115                         reg = <0xc00 0x100>;
 116                         interrupts = <74 0x8>;
 117                         interrupt-parent = <&ipic>;
 118                         gpio-controller;
 119                 };
 120
 121                 gpio2: gpio-controller@d00 {
 122                         #gpio-cells = <2>;
 123                         compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio";
 124                         reg = <0xd00 0x100>;
 125                         interrupts = <75 0x8>;
 126                         interrupt-parent = <&ipic>;
 127                         gpio-controller;
 128                 };
 129
 130                 i2c@3000 {
 131                         #address-cells = <1>;
 132                         #size-cells = <0>;
 133                         cell-index = <0>;
 134                         compatible = "fsl-i2c";
 135                         reg = <0x3000 0x100>;
 136                         interrupts = <14 0x8>;
 137                         interrupt-parent = <&ipic>;
 138                         dfsrr;
 139
 140                         dtt@48 {
 141                                 compatible = "national,lm75";
 142                                 reg = <0x48>;
 143                         };
 144
 145                         at24@50 {
 146                                 compatible = "at24,24c256";
 147                                 reg = <0x50>;
 148                         };
 149
 150                         rtc@68 {
 151                                 compatible = "dallas,ds1339";
 152                                 reg = <0x68>;
 153                         };
 154
 155                         mcu_pio: mcu@a {
 156                                 #gpio-cells = <2>;
 157                                 compatible = "fsl,mc9s08qg8-mpc8378erdb",
 158                                              "fsl,mcu-mpc8349emitx";
 159                                 reg = <0x0a>;
 160                                 gpio-controller;
 161                         };
 162                 };
 163
 164                 i2c@3100 {
 165                         #address-cells = <1>;
 166                         #size-cells = <0>;
 167                         cell-index = <1>;
 168                         compatible = "fsl-i2c";
 169                         reg = <0x3100 0x100>;
 170                         interrupts = <15 0x8>;
 171                         interrupt-parent = <&ipic>;
 172                         dfsrr;
 173                 };
 174
 175                 spi@7000 {
 176                         cell-index = <0>;
 177                         compatible = "fsl,spi";
 178                         reg = <0x7000 0x1000>;
 179                         interrupts = <16 0x8>;
 180                         interrupt-parent = <&ipic>;
 181                         mode = "cpu";
 182                 };
 183
 184                 dma@82a8 {
 185                         #address-cells = <1>;
 186                         #size-cells = <1>;
 187                         compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
 188                         reg = <0x82a8 4>;
 189                         ranges = <0 0x8100 0x1a8>;
 190                         interrupt-parent = <&ipic>;
 191                         interrupts = <71 8>;
 192                         cell-index = <0>;
 193                         dma-channel@0 {
 194                                 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
 195                                 reg = <0 0x80>;
 196                                 cell-index = <0>;
 197                                 interrupt-parent = <&ipic>;
 198                                 interrupts = <71 8>;
 199                         };
 200                         dma-channel@80 {
 201                                 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
 202                                 reg = <0x80 0x80>;
 203                                 cell-index = <1>;
 204                                 interrupt-parent = <&ipic>;
 205                                 interrupts = <71 8>;
 206                         };
 207                         dma-channel@100 {
 208                                 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
 209                                 reg = <0x100 0x80>;
 210                                 cell-index = <2>;
 211                                 interrupt-parent = <&ipic>;
 212                                 interrupts = <71 8>;
 213                         };
 214                         dma-channel@180 {
 215                                 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
 216                                 reg = <0x180 0x28>;
 217                                 cell-index = <3>;
 218                                 interrupt-parent = <&ipic>;
 219                                 interrupts = <71 8>;
 220                         };
 221                 };
 222
 223                 usb@23000 {
 224                         compatible = "fsl-usb2-dr";
 225                         reg = <0x23000 0x1000>;
 226                         #address-cells = <1>;
 227                         #size-cells = <0>;
 228                         interrupt-parent = <&ipic>;
 229                         interrupts = <38 0x8>;
 230                         phy_type = "ulpi";
 231                 };
 232
 233                 mdio@24520 {
 234                         #address-cells = <1>;
 235                         #size-cells = <0>;
 236                         compatible = "fsl,gianfar-mdio";
 237                         reg = <0x24520 0x20>;
 238                         phy2: ethernet-phy@2 {
 239                                 interrupt-parent = <&ipic>;
 240                                 interrupts = <17 0x8>;
 241                                 reg = <0x2>;
 242                                 device_type = "ethernet-phy";
 243                         };
 244                         tbi0: tbi-phy@11 {
 245                                 reg = <0x11>;
 246                                 device_type = "tbi-phy";
 247                         };
 248                 };
 249
 250                 mdio@25520 {
 251                         #address-cells = <1>;
 252                         #size-cells = <0>;
 253                         compatible = "fsl,gianfar-tbi";
 254                         reg = <0x25520 0x20>;
 255
 256                         tbi1: tbi-phy@11 {
 257                                 reg = <0x11>;
 258                                 device_type = "tbi-phy";
 259                         };
 260                 };
 261
 262
 263                 enet0: ethernet@24000 {
 264                         cell-index = <0>;
 265                         device_type = "network";
 266                         model = "eTSEC";
 267                         compatible = "gianfar";
 268                         reg = <0x24000 0x1000>;
 269                         local-mac-address = [ 00 00 00 00 00 00 ];
 270                         interrupts = <32 0x8 33 0x8 34 0x8>;
 271                         phy-connection-type = "mii";
 272                         interrupt-parent = <&ipic>;
 273                         phy-handle = <&phy2>;
 274                 };
 275
 276                 enet1: ethernet@25000 {
 277                         cell-index = <1>;
 278                         device_type = "network";
 279                         model = "eTSEC";
 280                         compatible = "gianfar";
 281                         reg = <0x25000 0x1000>;
 282                         local-mac-address = [ 00 00 00 00 00 00 ];
 283                         interrupts = <35 0x8 36 0x8 37 0x8>;
 284                         phy-connection-type = "mii";
 285                         interrupt-parent = <&ipic>;
 286                         fixed-link = <1 1 1000 0 0>;
 287                 };
 288
 289                 serial0: serial@4500 {
 290                         cell-index = <0>;
 291                         device_type = "serial";
 292                         compatible = "ns16550";
 293                         reg = <0x4500 0x100>;
 294                         clock-frequency = <0>;
 295                         interrupts = <9 0x8>;
 296                         interrupt-parent = <&ipic>;
 297                 };
 298
 299                 serial1: serial@4600 {
 300                         cell-index = <1>;
 301                         device_type = "serial";
 302                         compatible = "ns16550";
 303                         reg = <0x4600 0x100>;
 304                         clock-frequency = <0>;
 305                         interrupts = <10 0x8>;
 306                         interrupt-parent = <&ipic>;
 307                 };
 308
 309                 crypto@30000 {
 310                         compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
 311                                      "fsl,sec2.1", "fsl,sec2.0";
 312                         reg = <0x30000 0x10000>;
 313                         interrupts = <11 0x8>;
 314                         interrupt-parent = <&ipic>;
 315                         fsl,num-channels = <4>;
 316                         fsl,channel-fifo-len = <24>;
 317                         fsl,exec-units-mask = <0x9fe>;
 318                         fsl,descriptor-types-mask = <0x3ab0ebf>;
 319                 };
 320
 321                 sdhci@2e000 {
 322                         compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc";
 323                         reg = <0x2e000 0x1000>;
 324                         interrupts = <42 0x8>;
 325                         interrupt-parent = <&ipic>;
 326                         /* Filled in by U-Boot */
 327                         clock-frequency = <0>;
 328                 };
 329
 330                 /* IPIC
 331                  * interrupts cell = <intr #, sense>
 332                  * sense values match linux IORESOURCE_IRQ_* defines:
 333                  * sense == 8: Level, low assertion
 334                  * sense == 2: Edge, high-to-low change
 335                  */
 336                 ipic: interrupt-controller@700 {
 337                         compatible = "fsl,ipic";
 338                         interrupt-controller;
 339                         #address-cells = <0>;
 340                         #interrupt-cells = <2>;
 341                         reg = <0x700 0x100>;
 342                 };
 343         };
 344
 345         pci0: pci@e0008500 {
 346                 interrupt-map-mask = <0xf800 0 0 7>;
 347                 interrupt-map = <
 348                                 /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
 349
 350                                 /* IDSEL AD14 IRQ6 inta */
 351                                  0x7000 0x0 0x0 0x1 &ipic 22 0x8
 352
 353                                 /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
 354                                  0x7800 0x0 0x0 0x1 &ipic 21 0x8
 355                                  0x7800 0x0 0x0 0x2 &ipic 22 0x8
 356                                  0x7800 0x0 0x0 0x4 &ipic 23 0x8
 357
 358                                 /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
 359                                  0xE000 0x0 0x0 0x1 &ipic 23 0x8
 360                                  0xE000 0x0 0x0 0x2 &ipic 21 0x8
 361                                  0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
 362                 interrupt-parent = <&ipic>;
 363                 interrupts = <66 0x8>;
 364                 bus-range = <0 0>;
 365                 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
 366                           0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
 367                           0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
 368                 clock-frequency = <66666666>;
 369                 #interrupt-cells = <1>;
 370                 #size-cells = <2>;
 371                 #address-cells = <3>;
 372                 reg = <0xe0008500 0x100         /* internal registers */
 373                        0xe0008300 0x8>;         /* config space access registers */
 374                 compatible = "fsl,mpc8349-pci";
 375                 device_type = "pci";
 376         };
 377
 378         pci1: pcie@e0009000 {
 379                 #address-cells = <3>;
 380                 #size-cells = <2>;
 381                 #interrupt-cells = <1>;
 382                 device_type = "pci";
 383                 compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
 384                 reg = <0xe0009000 0x00001000>;
 385                 ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
 386                           0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
 387                 bus-range = <0 255>;
 388                 interrupt-map-mask = <0xf800 0 0 7>;
 389                 interrupt-map = <0 0 0 1 &ipic 1 8
 390                                  0 0 0 2 &ipic 1 8
 391                                  0 0 0 3 &ipic 1 8
 392                                  0 0 0 4 &ipic 1 8>;
 393                 clock-frequency = <0>;
 394
 395                 pcie@0 {
 396                         #address-cells = <3>;
 397                         #size-cells = <2>;
 398                         device_type = "pci";
 399                         reg = <0 0 0 0 0>;
 400                         ranges = <0x02000000 0 0xa8000000
 401                                   0x02000000 0 0xa8000000
 402                                   0 0x10000000
 403                                   0x01000000 0 0x00000000
 404                                   0x01000000 0 0x00000000
 405                                   0 0x00800000>;
 406                 };
 407         };
 408
 409         pci2: pcie@e000a000 {
 410                 #address-cells = <3>;
 411                 #size-cells = <2>;
 412                 #interrupt-cells = <1>;
 413                 device_type = "pci";
 414                 compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
 415                 reg = <0xe000a000 0x00001000>;
 416                 ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
 417                           0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
 418                 bus-range = <0 255>;
 419                 interrupt-map-mask = <0xf800 0 0 7>;
 420                 interrupt-map = <0 0 0 1 &ipic 2 8
 421                                  0 0 0 2 &ipic 2 8
 422                                  0 0 0 3 &ipic 2 8
 423                                  0 0 0 4 &ipic 2 8>;
 424                 clock-frequency = <0>;
 425
 426                 pcie@0 {
 427                         #address-cells = <3>;
 428                         #size-cells = <2>;
 429                         device_type = "pci";
 430                         reg = <0 0 0 0 0>;
 431                         ranges = <0x02000000 0 0xc8000000
 432                                   0x02000000 0 0xc8000000
 433                                   0 0x10000000
 434                                   0x01000000 0 0x00000000
 435                                   0x01000000 0 0x00000000
 436                                   0 0x00800000>;
 437                 };
 438         };
 439 };