arch/powerpc/boot/dts/mpc8536ds.dtsi

   1 /*
   2  * MPC8536DS Device Tree Source stub (no addresses or top-level ranges)
   3  *
   4  * Copyright 2011 Freescale Semiconductor Inc.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions are met:
   8  *     * Redistributions of source code must retain the above copyright
   9  *       notice, this list of conditions and the following disclaimer.
  10  *     * Redistributions in binary form must reproduce the above copyright
  11  *       notice, this list of conditions and the following disclaimer in the
  12  *       documentation and/or other materials provided with the distribution.
  13  *     * Neither the name of Freescale Semiconductor nor the
  14  *       names of its contributors may be used to endorse or promote products
  15  *       derived from this software without specific prior written permission.
  16  *
  17  *
  18  * ALTERNATIVELY, this software may be distributed under the terms of the
  19  * GNU General Public License ("GPL") as published by the Free Software
  20  * Foundation, either version 2 of that License or (at your option) any
  21  * later version.
  22  *
  23  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
  24  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  25  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  26  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  30  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  32  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  33  */
  34
  35 &lbc {
  36         nor@0,0 {
  37                 #address-cells = <1>;
  38                 #size-cells = <1>;
  39                 compatible = "cfi-flash";
  40                 reg = <0x0 0x0 0x8000000>;
  41                 bank-width = <2>;
  42                 device-width = <1>;
  43
  44                 partition@0 {
  45                         reg = <0x0 0x03000000>;
  46                         label = "ramdisk-nor";
  47                 };
  48
  49                 partition@3000000 {
  50                         reg = <0x03000000 0x00e00000>;
  51                         label = "diagnostic-nor";
  52                         read-only;
  53                 };
  54
  55                 partition@3e00000 {
  56                         reg = <0x03e00000 0x00200000>;
  57                         label = "dink-nor";
  58                         read-only;
  59                 };
  60
  61                 partition@4000000 {
  62                         reg = <0x04000000 0x00400000>;
  63                         label = "kernel-nor";
  64                 };
  65
  66                 partition@4400000 {
  67                         reg = <0x04400000 0x03b00000>;
  68                         label = "fs-nor";
  69                 };
  70
  71                 partition@7f00000 {
  72                         reg = <0x07f00000 0x00080000>;
  73                         label = "dtb-nor";
  74                 };
  75
  76                 partition@7f80000 {
  77                         reg = <0x07f80000 0x00080000>;
  78                         label = "u-boot-nor";
  79                         read-only;
  80                 };
  81         };
  82
  83         nand@2,0 {
  84                 #address-cells = <1>;
  85                 #size-cells = <1>;
  86                 compatible = "fsl,mpc8536-fcm-nand",
  87                              "fsl,elbc-fcm-nand";
  88                 reg = <0x2 0x0 0x40000>;
  89
  90                 partition@0 {
  91                         reg = <0x0 0x02000000>;
  92                         label = "u-boot-nand";
  93                         read-only;
  94                 };
  95
  96                 partition@2000000 {
  97                         reg = <0x02000000 0x10000000>;
  98                         label = "fs-nand";
  99                 };
 100
 101                 partition@12000000 {
 102                         reg = <0x12000000 0x08000000>;
 103                         label = "ramdisk-nand";
 104                 };
 105
 106                 partition@1a000000 {
 107                         reg = <0x1a000000 0x04000000>;
 108                         label = "kernel-nand";
 109                 };
 110
 111                 partition@1e000000 {
 112                         reg = <0x1e000000 0x01000000>;
 113                         label = "dtb-nand";
 114                 };
 115
 116                 partition@1f000000 {
 117                         reg = <0x1f000000 0x21000000>;
 118                         label = "empty-nand";
 119                 };
 120         };
 121
 122         board-control@3,0 {
 123                 compatible = "fsl,mpc8536ds-fpga-pixis";
 124                 reg = <0x3 0x0 0x8000>;
 125         };
 126 };
 127
 128 &board_soc {
 129         i2c@3100 {
 130                 rtc@68 {
 131                         compatible = "dallas,ds3232";
 132                         reg = <0x68>;
 133                         interrupts = <0 0x1 0 0>;
 134                 };
 135                 adt7461@4c {
 136                         compatible = "adi,adt7461";
 137                         reg = <0x4c>;
 138                 };
 139         };
 140
 141         spi@7000 {
 142                 flash@0 {
 143                         #address-cells = <1>;
 144                         #size-cells = <1>;
 145                         compatible = "spansion,s25sl12801";
 146                         reg = <0>;
 147                         spi-max-frequency = <40000000>;
 148                         partition@u-boot {
 149                                 label = "u-boot";
 150                                 reg = <0x00000000 0x00100000>;
 151                                 read-only;
 152                         };
 153                         partition@kernel {
 154                                 label = "kernel";
 155                                 reg = <0x00100000 0x00500000>;
 156                                 read-only;
 157                         };
 158                         partition@dtb {
 159                                 label = "dtb";
 160                                 reg = <0x00600000 0x00100000>;
 161                                 read-only;
 162                         };
 163                         partition@fs {
 164                                 label = "file system";
 165                                 reg = <0x00700000 0x00900000>;
 166                         };
 167                 };
 168                 flash@1 {
 169                         compatible = "spansion,s25sl12801";
 170                         reg = <1>;
 171                         spi-max-frequency = <40000000>;
 172                 };
 173                 flash@2 {
 174                         compatible = "spansion,s25sl12801";
 175                         reg = <2>;
 176                         spi-max-frequency = <40000000>;
 177                 };
 178                 flash@3 {
 179                         compatible = "spansion,s25sl12801";
 180                         reg = <3>;
 181                         spi-max-frequency = <40000000>;
 182                 };
 183         };
 184
 185         usb@22000 {
 186                 phy_type = "ulpi";
 187         };
 188
 189         usb@23000 {
 190                 phy_type = "ulpi";
 191         };
 192
 193         enet0: ethernet@24000 {
 194                 tbi-handle = <&tbi0>;
 195                 phy-handle = <&phy1>;
 196                 phy-connection-type = "rgmii-id";
 197         };
 198
 199         mdio@24520 {
 200                 phy0: ethernet-phy@0 {
 201                         interrupts = <10 0x1 0 0>;
 202                         reg = <0>;
 203                 };
 204                 phy1: ethernet-phy@1 {
 205                         interrupts = <10 0x1 0 0>;
 206                         reg = <1>;
 207                 };
 208                 sgmii_phy0: sgmii-phy@0 {
 209                         interrupts = <6 1 0 0>;
 210                         reg = <0x1d>;
 211                 };
 212                 sgmii_phy1: sgmii-phy@1 {
 213                         interrupts = <6 1 0 0>;
 214                         reg = <0x1c>;
 215                 };
 216                 tbi0: tbi-phy@11 {
 217                         reg = <0x11>;
 218                         device_type = "tbi-phy";
 219                 };
 220         };
 221
 222         enet2: ethernet@26000 {
 223                 tbi-handle = <&tbi1>;
 224                 phy-handle = <&phy0>;
 225                 phy-connection-type = "rgmii-id";
 226         };
 227
 228         mdio@26520 {
 229                 #address-cells = <1>;
 230                 #size-cells = <0>;
 231                 compatible = "fsl,gianfar-tbi";
 232                 reg = <0x26520 0x20>;
 233
 234                 tbi1: tbi-phy@11 {
 235                         reg = <0x11>;
 236                         device_type = "tbi-phy";
 237                 };
 238         };
 239
 240         usb@2b000 {
 241                 dr_mode = "peripheral";
 242                 phy_type = "ulpi";
 243         };
 244 };