arch/powerpc/boot/dts/mpc8541cds.dts

   1 /*
   2  * MPC8541 CDS Device Tree Source
   3  *
   4  * Copyright 2006, 2008 Freescale Semiconductor Inc.
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10  */
  11
  12 /dts-v1/;
  13
  14 / {
  15         model = "MPC8541CDS";
  16         compatible = "MPC8541CDS", "MPC85xxCDS";
  17         #address-cells = <1>;
  18         #size-cells = <1>;
  19
  20         aliases {
  21                 ethernet0 = &enet0;
  22                 ethernet1 = &enet1;
  23                 serial0 = &serial0;
  24                 serial1 = &serial1;
  25                 pci0 = &pci0;
  26                 pci1 = &pci1;
  27         };
  28
  29         cpus {
  30                 #address-cells = <1>;
  31                 #size-cells = <0>;
  32
  33                 PowerPC,8541@0 {
  34                         device_type = "cpu";
  35                         reg = <0x0>;
  36                         d-cache-line-size = <32>;       // 32 bytes
  37                         i-cache-line-size = <32>;       // 32 bytes
  38                         d-cache-size = <0x8000>;                // L1, 32K
  39                         i-cache-size = <0x8000>;                // L1, 32K
  40                         timebase-frequency = <0>;       //  33 MHz, from uboot
  41                         bus-frequency = <0>;    // 166 MHz
  42                         clock-frequency = <0>;  // 825 MHz, from uboot
  43                         next-level-cache = <&L2>;
  44                 };
  45         };
  46
  47         memory {
  48                 device_type = "memory";
  49                 reg = <0x0 0x8000000>;  // 128M at 0x0
  50         };
  51
  52         soc8541@e0000000 {
  53                 #address-cells = <1>;
  54                 #size-cells = <1>;
  55                 device_type = "soc";
  56                 compatible = "simple-bus";
  57                 ranges = <0x0 0xe0000000 0x100000>;
  58                 reg = <0xe0000000 0x1000>;      // CCSRBAR 1M
  59                 bus-frequency = <0>;
  60
  61                 memory-controller@2000 {
  62                         compatible = "fsl,8541-memory-controller";
  63                         reg = <0x2000 0x1000>;
  64                         interrupt-parent = <&mpic>;
  65                         interrupts = <18 2>;
  66                 };
  67
  68                 L2: l2-cache-controller@20000 {
  69                         compatible = "fsl,8541-l2-cache-controller";
  70                         reg = <0x20000 0x1000>;
  71                         cache-line-size = <32>; // 32 bytes
  72                         cache-size = <0x40000>; // L2, 256K
  73                         interrupt-parent = <&mpic>;
  74                         interrupts = <16 2>;
  75                 };
  76
  77                 i2c@3000 {
  78                         #address-cells = <1>;
  79                         #size-cells = <0>;
  80                         cell-index = <0>;
  81                         compatible = "fsl-i2c";
  82                         reg = <0x3000 0x100>;
  83                         interrupts = <43 2>;
  84                         interrupt-parent = <&mpic>;
  85                         dfsrr;
  86                 };
  87
  88                 dma@21300 {
  89                         #address-cells = <1>;
  90                         #size-cells = <1>;
  91                         compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma";
  92                         reg = <0x21300 0x4>;
  93                         ranges = <0x0 0x21100 0x200>;
  94                         cell-index = <0>;
  95                         dma-channel@0 {
  96                                 compatible = "fsl,mpc8541-dma-channel",
  97                                                 "fsl,eloplus-dma-channel";
  98                                 reg = <0x0 0x80>;
  99                                 cell-index = <0>;
 100                                 interrupt-parent = <&mpic>;
 101                                 interrupts = <20 2>;
 102                         };
 103                         dma-channel@80 {
 104                                 compatible = "fsl,mpc8541-dma-channel",
 105                                                 "fsl,eloplus-dma-channel";
 106                                 reg = <0x80 0x80>;
 107                                 cell-index = <1>;
 108                                 interrupt-parent = <&mpic>;
 109                                 interrupts = <21 2>;
 110                         };
 111                         dma-channel@100 {
 112                                 compatible = "fsl,mpc8541-dma-channel",
 113                                                 "fsl,eloplus-dma-channel";
 114                                 reg = <0x100 0x80>;
 115                                 cell-index = <2>;
 116                                 interrupt-parent = <&mpic>;
 117                                 interrupts = <22 2>;
 118                         };
 119                         dma-channel@180 {
 120                                 compatible = "fsl,mpc8541-dma-channel",
 121                                                 "fsl,eloplus-dma-channel";
 122                                 reg = <0x180 0x80>;
 123                                 cell-index = <3>;
 124                                 interrupt-parent = <&mpic>;
 125                                 interrupts = <23 2>;
 126                         };
 127                 };
 128
 129                 mdio@24520 {
 130                         #address-cells = <1>;
 131                         #size-cells = <0>;
 132                         compatible = "fsl,gianfar-mdio";
 133                         reg = <0x24520 0x20>;
 134
 135                         phy0: ethernet-phy@0 {
 136                                 interrupt-parent = <&mpic>;
 137                                 interrupts = <5 1>;
 138                                 reg = <0x0>;
 139                                 device_type = "ethernet-phy";
 140                         };
 141                         phy1: ethernet-phy@1 {
 142                                 interrupt-parent = <&mpic>;
 143                                 interrupts = <5 1>;
 144                                 reg = <0x1>;
 145                                 device_type = "ethernet-phy";
 146                         };
 147                         tbi0: tbi-phy@11 {
 148                                 reg = <0x11>;
 149                                 device_type = "tbi-phy";
 150                         };
 151                 };
 152
 153                 mdio@25520 {
 154                         #address-cells = <1>;
 155                         #size-cells = <0>;
 156                         compatible = "fsl,gianfar-tbi";
 157                         reg = <0x25520 0x20>;
 158
 159                         tbi1: tbi-phy@11 {
 160                                 reg = <0x11>;
 161                                 device_type = "tbi-phy";
 162                         };
 163                 };
 164
 165                 enet0: ethernet@24000 {
 166                         cell-index = <0>;
 167                         device_type = "network";
 168                         model = "TSEC";
 169                         compatible = "gianfar";
 170                         reg = <0x24000 0x1000>;
 171                         local-mac-address = [ 00 00 00 00 00 00 ];
 172                         interrupts = <29 2 30 2 34 2>;
 173                         interrupt-parent = <&mpic>;
 174                         tbi-handle = <&tbi0>;
 175                         phy-handle = <&phy0>;
 176                 };
 177
 178                 enet1: ethernet@25000 {
 179                         cell-index = <1>;
 180                         device_type = "network";
 181                         model = "TSEC";
 182                         compatible = "gianfar";
 183                         reg = <0x25000 0x1000>;
 184                         local-mac-address = [ 00 00 00 00 00 00 ];
 185                         interrupts = <35 2 36 2 40 2>;
 186                         interrupt-parent = <&mpic>;
 187                         tbi-handle = <&tbi1>;
 188                         phy-handle = <&phy1>;
 189                 };
 190
 191                 serial0: serial@4500 {
 192                         cell-index = <0>;
 193                         device_type = "serial";
 194                         compatible = "ns16550";
 195                         reg = <0x4500 0x100>;   // reg base, size
 196                         clock-frequency = <0>;  // should we fill in in uboot?
 197                         interrupts = <42 2>;
 198                         interrupt-parent = <&mpic>;
 199                 };
 200
 201                 serial1: serial@4600 {
 202                         cell-index = <1>;
 203                         device_type = "serial";
 204                         compatible = "ns16550";
 205                         reg = <0x4600 0x100>;   // reg base, size
 206                         clock-frequency = <0>;  // should we fill in in uboot?
 207                         interrupts = <42 2>;
 208                         interrupt-parent = <&mpic>;
 209                 };
 210
 211                 crypto@30000 {
 212                         compatible = "fsl,sec2.0";
 213                         reg = <0x30000 0x10000>;
 214                         interrupts = <45 2>;
 215                         interrupt-parent = <&mpic>;
 216                         fsl,num-channels = <4>;
 217                         fsl,channel-fifo-len = <24>;
 218                         fsl,exec-units-mask = <0x7e>;
 219                         fsl,descriptor-types-mask = <0x01010ebf>;
 220                 };
 221
 222                 mpic: pic@40000 {
 223                         interrupt-controller;
 224                         #address-cells = <0>;
 225                         #interrupt-cells = <2>;
 226                         reg = <0x40000 0x40000>;
 227                         compatible = "chrp,open-pic";
 228                         device_type = "open-pic";
 229                 };
 230
 231                 cpm@919c0 {
 232                         #address-cells = <1>;
 233                         #size-cells = <1>;
 234                         compatible = "fsl,mpc8541-cpm", "fsl,cpm2";
 235                         reg = <0x919c0 0x30>;
 236                         ranges;
 237
 238                         muram@80000 {
 239                                 #address-cells = <1>;
 240                                 #size-cells = <1>;
 241                                 ranges = <0x0 0x80000 0x10000>;
 242
 243                                 data@0 {
 244                                         compatible = "fsl,cpm-muram-data";
 245                                         reg = <0x0 0x2000 0x9000 0x1000>;
 246                                 };
 247                         };
 248
 249                         brg@919f0 {
 250                                 compatible = "fsl,mpc8541-brg",
 251                                              "fsl,cpm2-brg",
 252                                              "fsl,cpm-brg";
 253                                 reg = <0x919f0 0x10 0x915f0 0x10>;
 254                         };
 255
 256                         cpmpic: pic@90c00 {
 257                                 interrupt-controller;
 258                                 #address-cells = <0>;
 259                                 #interrupt-cells = <2>;
 260                                 interrupts = <46 2>;
 261                                 interrupt-parent = <&mpic>;
 262                                 reg = <0x90c00 0x80>;
 263                                 compatible = "fsl,mpc8541-cpm-pic", "fsl,cpm2-pic";
 264                         };
 265                 };
 266         };
 267
 268         pci0: pci@e0008000 {
 269                 cell-index = <0>;
 270                 interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
 271                 interrupt-map = <
 272
 273                         /* IDSEL 0x10 */
 274                         0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
 275                         0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
 276                         0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
 277                         0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
 278
 279                         /* IDSEL 0x11 */
 280                         0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
 281                         0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
 282                         0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
 283                         0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
 284
 285                         /* IDSEL 0x12 (Slot 1) */
 286                         0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
 287                         0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
 288                         0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
 289                         0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
 290
 291                         /* IDSEL 0x13 (Slot 2) */
 292                         0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
 293                         0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
 294                         0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
 295                         0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
 296
 297                         /* IDSEL 0x14 (Slot 3) */
 298                         0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
 299                         0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
 300                         0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
 301                         0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
 302
 303                         /* IDSEL 0x15 (Slot 4) */
 304                         0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
 305                         0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
 306                         0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
 307                         0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
 308
 309                         /* Bus 1 (Tundra Bridge) */
 310                         /* IDSEL 0x12 (ISA bridge) */
 311                         0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
 312                         0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
 313                         0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
 314                         0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
 315                 interrupt-parent = <&mpic>;
 316                 interrupts = <24 2>;
 317                 bus-range = <0 0>;
 318                 ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
 319                           0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
 320                 clock-frequency = <66666666>;
 321                 #interrupt-cells = <1>;
 322                 #size-cells = <2>;
 323                 #address-cells = <3>;
 324                 reg = <0xe0008000 0x1000>;
 325                 compatible = "fsl,mpc8540-pci";
 326                 device_type = "pci";
 327
 328                 i8259@19000 {
 329                         interrupt-controller;
 330                         device_type = "interrupt-controller";
 331                         reg = <0x19000 0x0 0x0 0x0 0x1>;
 332                         #address-cells = <0>;
 333                         #interrupt-cells = <2>;
 334                         compatible = "chrp,iic";
 335                         interrupts = <1>;
 336                         interrupt-parent = <&pci0>;
 337                 };
 338         };
 339
 340         pci1: pci@e0009000 {
 341                 cell-index = <1>;
 342                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 343                 interrupt-map = <
 344
 345                         /* IDSEL 0x15 */
 346                         0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
 347                         0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
 348                         0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
 349                         0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
 350                 interrupt-parent = <&mpic>;
 351                 interrupts = <25 2>;
 352                 bus-range = <0 0>;
 353                 ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
 354                           0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
 355                 clock-frequency = <66666666>;
 356                 #interrupt-cells = <1>;
 357                 #size-cells = <2>;
 358                 #address-cells = <3>;
 359                 reg = <0xe0009000 0x1000>;
 360                 compatible = "fsl,mpc8540-pci";
 361                 device_type = "pci";
 362         };
 363 };