arch/powerpc/boot/dts/mpc8548cds.dts

   1 /*
   2  * MPC8548 CDS Device Tree Source
   3  *
   4  * Copyright 2006, 2008 Freescale Semiconductor Inc.
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10  */
  11
  12 /dts-v1/;
  13
  14 / {
  15         model = "MPC8548CDS";
  16         compatible = "MPC8548CDS", "MPC85xxCDS";
  17         #address-cells = <1>;
  18         #size-cells = <1>;
  19
  20         aliases {
  21                 ethernet0 = &enet0;
  22                 ethernet1 = &enet1;
  23 /*
  24                 ethernet2 = &enet2;
  25                 ethernet3 = &enet3;
  26 */
  27                 serial0 = &serial0;
  28                 serial1 = &serial1;
  29                 pci0 = &pci0;
  30                 pci1 = &pci1;
  31                 pci2 = &pci2;
  32         };
  33
  34         cpus {
  35                 #address-cells = <1>;
  36                 #size-cells = <0>;
  37
  38                 PowerPC,8548@0 {
  39                         device_type = "cpu";
  40                         reg = <0x0>;
  41                         d-cache-line-size = <32>;       // 32 bytes
  42                         i-cache-line-size = <32>;       // 32 bytes
  43                         d-cache-size = <0x8000>;                // L1, 32K
  44                         i-cache-size = <0x8000>;                // L1, 32K
  45                         timebase-frequency = <0>;       //  33 MHz, from uboot
  46                         bus-frequency = <0>;    // 166 MHz
  47                         clock-frequency = <0>;  // 825 MHz, from uboot
  48                 };
  49         };
  50
  51         memory {
  52                 device_type = "memory";
  53                 reg = <0x0 0x8000000>;  // 128M at 0x0
  54         };
  55
  56         soc8548@e0000000 {
  57                 #address-cells = <1>;
  58                 #size-cells = <1>;
  59                 device_type = "soc";
  60                 ranges = <0x0 0xe0000000 0x100000>;
  61                 reg = <0xe0000000 0x1000>;      // CCSRBAR
  62                 bus-frequency = <0>;
  63
  64                 memory-controller@2000 {
  65                         compatible = "fsl,8548-memory-controller";
  66                         reg = <0x2000 0x1000>;
  67                         interrupt-parent = <&mpic>;
  68                         interrupts = <18 2>;
  69                 };
  70
  71                 l2-cache-controller@20000 {
  72                         compatible = "fsl,8548-l2-cache-controller";
  73                         reg = <0x20000 0x1000>;
  74                         cache-line-size = <32>; // 32 bytes
  75                         cache-size = <0x80000>; // L2, 512K
  76                         interrupt-parent = <&mpic>;
  77                         interrupts = <16 2>;
  78                 };
  79
  80                 i2c@3000 {
  81                         #address-cells = <1>;
  82                         #size-cells = <0>;
  83                         cell-index = <0>;
  84                         compatible = "fsl-i2c";
  85                         reg = <0x3000 0x100>;
  86                         interrupts = <43 2>;
  87                         interrupt-parent = <&mpic>;
  88                         dfsrr;
  89                 };
  90
  91                 i2c@3100 {
  92                         #address-cells = <1>;
  93                         #size-cells = <0>;
  94                         cell-index = <1>;
  95                         compatible = "fsl-i2c";
  96                         reg = <0x3100 0x100>;
  97                         interrupts = <43 2>;
  98                         interrupt-parent = <&mpic>;
  99                         dfsrr;
 100                 };
 101
 102                 mdio@24520 {
 103                         #address-cells = <1>;
 104                         #size-cells = <0>;
 105                         compatible = "fsl,gianfar-mdio";
 106                         reg = <0x24520 0x20>;
 107
 108                         phy0: ethernet-phy@0 {
 109                                 interrupt-parent = <&mpic>;
 110                                 interrupts = <5 1>;
 111                                 reg = <0x0>;
 112                                 device_type = "ethernet-phy";
 113                         };
 114                         phy1: ethernet-phy@1 {
 115                                 interrupt-parent = <&mpic>;
 116                                 interrupts = <5 1>;
 117                                 reg = <0x1>;
 118                                 device_type = "ethernet-phy";
 119                         };
 120                         phy2: ethernet-phy@2 {
 121                                 interrupt-parent = <&mpic>;
 122                                 interrupts = <5 1>;
 123                                 reg = <0x2>;
 124                                 device_type = "ethernet-phy";
 125                         };
 126                         phy3: ethernet-phy@3 {
 127                                 interrupt-parent = <&mpic>;
 128                                 interrupts = <5 1>;
 129                                 reg = <0x3>;
 130                                 device_type = "ethernet-phy";
 131                         };
 132                 };
 133
 134                 enet0: ethernet@24000 {
 135                         cell-index = <0>;
 136                         device_type = "network";
 137                         model = "eTSEC";
 138                         compatible = "gianfar";
 139                         reg = <0x24000 0x1000>;
 140                         local-mac-address = [ 00 00 00 00 00 00 ];
 141                         interrupts = <29 2 30 2 34 2>;
 142                         interrupt-parent = <&mpic>;
 143                         phy-handle = <&phy0>;
 144                 };
 145
 146                 enet1: ethernet@25000 {
 147                         cell-index = <1>;
 148                         device_type = "network";
 149                         model = "eTSEC";
 150                         compatible = "gianfar";
 151                         reg = <0x25000 0x1000>;
 152                         local-mac-address = [ 00 00 00 00 00 00 ];
 153                         interrupts = <35 2 36 2 40 2>;
 154                         interrupt-parent = <&mpic>;
 155                         phy-handle = <&phy1>;
 156                 };
 157
 158 /* eTSEC 3/4 are currently broken
 159                 enet2: ethernet@26000 {
 160                         cell-index = <2>;
 161                         device_type = "network";
 162                         model = "eTSEC";
 163                         compatible = "gianfar";
 164                         reg = <0x26000 0x1000>;
 165                         local-mac-address = [ 00 00 00 00 00 00 ];
 166                         interrupts = <31 2 32 2 33 2>;
 167                         interrupt-parent = <&mpic>;
 168                         phy-handle = <&phy2>;
 169                 };
 170
 171                 enet3: ethernet@27000 {
 172                         cell-index = <3>;
 173                         device_type = "network";
 174                         model = "eTSEC";
 175                         compatible = "gianfar";
 176                         reg = <0x27000 0x1000>;
 177                         local-mac-address = [ 00 00 00 00 00 00 ];
 178                         interrupts = <37 2 38 2 39 2>;
 179                         interrupt-parent = <&mpic>;
 180                         phy-handle = <&phy3>;
 181                 };
 182  */
 183
 184                 serial0: serial@4500 {
 185                         cell-index = <0>;
 186                         device_type = "serial";
 187                         compatible = "ns16550";
 188                         reg = <0x4500 0x100>;   // reg base, size
 189                         clock-frequency = <0>;  // should we fill in in uboot?
 190                         interrupts = <42 2>;
 191                         interrupt-parent = <&mpic>;
 192                 };
 193
 194                 serial1: serial@4600 {
 195                         cell-index = <1>;
 196                         device_type = "serial";
 197                         compatible = "ns16550";
 198                         reg = <0x4600 0x100>;   // reg base, size
 199                         clock-frequency = <0>;  // should we fill in in uboot?
 200                         interrupts = <42 2>;
 201                         interrupt-parent = <&mpic>;
 202                 };
 203
 204                 global-utilities@e0000 {        //global utilities reg
 205                         compatible = "fsl,mpc8548-guts";
 206                         reg = <0xe0000 0x1000>;
 207                         fsl,has-rstcr;
 208                 };
 209
 210                 mpic: pic@40000 {
 211                         clock-frequency = <0>;
 212                         interrupt-controller;
 213                         #address-cells = <0>;
 214                         #interrupt-cells = <2>;
 215                         reg = <0x40000 0x40000>;
 216                         compatible = "chrp,open-pic";
 217                         device_type = "open-pic";
 218                         big-endian;
 219                 };
 220         };
 221
 222         pci0: pci@e0008000 {
 223                 cell-index = <0>;
 224                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 225                 interrupt-map = <
 226                         /* IDSEL 0x4 (PCIX Slot 2) */
 227                         0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
 228                         0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
 229                         0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
 230                         0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
 231
 232                         /* IDSEL 0x5 (PCIX Slot 3) */
 233                         0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
 234                         0x2800 0x0 0x0 0x2 &mpic 0x2 0x1
 235                         0x2800 0x0 0x0 0x3 &mpic 0x3 0x1
 236                         0x2800 0x0 0x0 0x4 &mpic 0x0 0x1
 237
 238                         /* IDSEL 0x6 (PCIX Slot 4) */
 239                         0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
 240                         0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
 241                         0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
 242                         0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
 243
 244                         /* IDSEL 0x8 (PCIX Slot 5) */
 245                         0x4000 0x0 0x0 0x1 &mpic 0x0 0x1
 246                         0x4000 0x0 0x0 0x2 &mpic 0x1 0x1
 247                         0x4000 0x0 0x0 0x3 &mpic 0x2 0x1
 248                         0x4000 0x0 0x0 0x4 &mpic 0x3 0x1
 249
 250                         /* IDSEL 0xC (Tsi310 bridge) */
 251                         0x6000 0x0 0x0 0x1 &mpic 0x0 0x1
 252                         0x6000 0x0 0x0 0x2 &mpic 0x1 0x1
 253                         0x6000 0x0 0x0 0x3 &mpic 0x2 0x1
 254                         0x6000 0x0 0x0 0x4 &mpic 0x3 0x1
 255
 256                         /* IDSEL 0x14 (Slot 2) */
 257                         0xa000 0x0 0x0 0x1 &mpic 0x0 0x1
 258                         0xa000 0x0 0x0 0x2 &mpic 0x1 0x1
 259                         0xa000 0x0 0x0 0x3 &mpic 0x2 0x1
 260                         0xa000 0x0 0x0 0x4 &mpic 0x3 0x1
 261
 262                         /* IDSEL 0x15 (Slot 3) */
 263                         0xa800 0x0 0x0 0x1 &mpic 0x1 0x1
 264                         0xa800 0x0 0x0 0x2 &mpic 0x2 0x1
 265                         0xa800 0x0 0x0 0x3 &mpic 0x3 0x1
 266                         0xa800 0x0 0x0 0x4 &mpic 0x0 0x1
 267
 268                         /* IDSEL 0x16 (Slot 4) */
 269                         0xb000 0x0 0x0 0x1 &mpic 0x2 0x1
 270                         0xb000 0x0 0x0 0x2 &mpic 0x3 0x1
 271                         0xb000 0x0 0x0 0x3 &mpic 0x0 0x1
 272                         0xb000 0x0 0x0 0x4 &mpic 0x1 0x1
 273
 274                         /* IDSEL 0x18 (Slot 5) */
 275                         0xc000 0x0 0x0 0x1 &mpic 0x0 0x1
 276                         0xc000 0x0 0x0 0x2 &mpic 0x1 0x1
 277                         0xc000 0x0 0x0 0x3 &mpic 0x2 0x1
 278                         0xc000 0x0 0x0 0x4 &mpic 0x3 0x1
 279
 280                         /* IDSEL 0x1C (Tsi310 bridge PCI primary) */
 281                         0xe000 0x0 0x0 0x1 &mpic 0x0 0x1
 282                         0xe000 0x0 0x0 0x2 &mpic 0x1 0x1
 283                         0xe000 0x0 0x0 0x3 &mpic 0x2 0x1
 284                         0xe000 0x0 0x0 0x4 &mpic 0x3 0x1>;
 285
 286                 interrupt-parent = <&mpic>;
 287                 interrupts = <24 2>;
 288                 bus-range = <0 0>;
 289                 ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x10000000
 290                           0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
 291                 clock-frequency = <66666666>;
 292                 #interrupt-cells = <1>;
 293                 #size-cells = <2>;
 294                 #address-cells = <3>;
 295                 reg = <0xe0008000 0x1000>;
 296                 compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
 297                 device_type = "pci";
 298
 299                 pci_bridge@1c {
 300                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 301                         interrupt-map = <
 302
 303                                 /* IDSEL 0x00 (PrPMC Site) */
 304                                 0000 0x0 0x0 0x1 &mpic 0x0 0x1
 305                                 0000 0x0 0x0 0x2 &mpic 0x1 0x1
 306                                 0000 0x0 0x0 0x3 &mpic 0x2 0x1
 307                                 0000 0x0 0x0 0x4 &mpic 0x3 0x1
 308
 309                                 /* IDSEL 0x04 (VIA chip) */
 310                                 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
 311                                 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
 312                                 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
 313                                 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
 314
 315                                 /* IDSEL 0x05 (8139) */
 316                                 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
 317
 318                                 /* IDSEL 0x06 (Slot 6) */
 319                                 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
 320                                 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
 321                                 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
 322                                 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
 323
 324                                 /* IDESL 0x07 (Slot 7) */
 325                                 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1
 326                                 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1
 327                                 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1
 328                                 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1>;
 329
 330                         reg = <0xe000 0x0 0x0 0x0 0x0>;
 331                         #interrupt-cells = <1>;
 332                         #size-cells = <2>;
 333                         #address-cells = <3>;
 334                         ranges = <0x2000000 0x0 0x80000000
 335                                   0x2000000 0x0 0x80000000
 336                                   0x0 0x20000000
 337                                   0x1000000 0x0 0x0
 338                                   0x1000000 0x0 0x0
 339                                   0x0 0x80000>;
 340                         clock-frequency = <33333333>;
 341
 342                         isa@4 {
 343                                 device_type = "isa";
 344                                 #interrupt-cells = <2>;
 345                                 #size-cells = <1>;
 346                                 #address-cells = <2>;
 347                                 reg = <0x2000 0x0 0x0 0x0 0x0>;
 348                                 ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>;
 349                                 interrupt-parent = <&i8259>;
 350
 351                                 i8259: interrupt-controller@20 {
 352                                         interrupt-controller;
 353                                         device_type = "interrupt-controller";
 354                                         reg = <0x1 0x20 0x2
 355                                                0x1 0xa0 0x2
 356                                                0x1 0x4d0 0x2>;
 357                                         #address-cells = <0>;
 358                                         #interrupt-cells = <2>;
 359                                         compatible = "chrp,iic";
 360                                         interrupts = <0 1>;
 361                                         interrupt-parent = <&mpic>;
 362                                 };
 363
 364                                 rtc@70 {
 365                                         compatible = "pnpPNP,b00";
 366                                         reg = <0x1 0x70 0x2>;
 367                                 };
 368                         };
 369                 };
 370         };
 371
 372         pci1: pci@e0009000 {
 373                 cell-index = <1>;
 374                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 375                 interrupt-map = <
 376
 377                         /* IDSEL 0x15 */
 378                         0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
 379                         0xa800 0x0 0x0 0x2 &mpic 0x1 0x1
 380                         0xa800 0x0 0x0 0x3 &mpic 0x2 0x1
 381                         0xa800 0x0 0x0 0x4 &mpic 0x3 0x1>;
 382
 383                 interrupt-parent = <&mpic>;
 384                 interrupts = <25 2>;
 385                 bus-range = <0 0>;
 386                 ranges = <0x2000000 0x0 0x90000000 0x90000000 0x0 0x10000000
 387                           0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
 388                 clock-frequency = <66666666>;
 389                 #interrupt-cells = <1>;
 390                 #size-cells = <2>;
 391                 #address-cells = <3>;
 392                 reg = <0xe0009000 0x1000>;
 393                 compatible = "fsl,mpc8540-pci";
 394                 device_type = "pci";
 395         };
 396
 397         pci2: pcie@e000a000 {
 398                 cell-index = <2>;
 399                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 400                 interrupt-map = <
 401
 402                         /* IDSEL 0x0 (PEX) */
 403                         00000 0x0 0x0 0x1 &mpic 0x0 0x1
 404                         00000 0x0 0x0 0x2 &mpic 0x1 0x1
 405                         00000 0x0 0x0 0x3 &mpic 0x2 0x1
 406                         00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
 407
 408                 interrupt-parent = <&mpic>;
 409                 interrupts = <26 2>;
 410                 bus-range = <0 255>;
 411                 ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
 412                           0x1000000 0x0 0x0 0xe3000000 0x0 0x8000000>;
 413                 clock-frequency = <33333333>;
 414                 #interrupt-cells = <1>;
 415                 #size-cells = <2>;
 416                 #address-cells = <3>;
 417                 reg = <0xe000a000 0x1000>;
 418                 compatible = "fsl,mpc8548-pcie";
 419                 device_type = "pci";
 420                 pcie@0 {
 421                         reg = <0x0 0x0 0x0 0x0 0x0>;
 422                         #size-cells = <2>;
 423                         #address-cells = <3>;
 424                         device_type = "pci";
 425                         ranges = <0x2000000 0x0 0xa0000000
 426                                   0x2000000 0x0 0xa0000000
 427                                   0x0 0x20000000
 428
 429                                   0x1000000 0x0 0x0
 430                                   0x1000000 0x0 0x0
 431                                   0x0 0x8000000>;
 432                 };
 433         };
 434 };