Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelv...
[deliverable/linux.git] / arch / powerpc / boot / dts / mpc8569mds.dts
1 /*
2 * MPC8569E MDS Device Tree Source
3 *
4 * Copyright (C) 2009 Freescale Semiconductor Inc.
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
10 */
11
12 /dts-v1/;
13
14 / {
15 model = "MPC8569EMDS";
16 compatible = "fsl,MPC8569EMDS";
17 #address-cells = <1>;
18 #size-cells = <1>;
19
20 aliases {
21 serial0 = &serial0;
22 serial1 = &serial1;
23 ethernet0 = &enet0;
24 ethernet1 = &enet1;
25 ethernet2 = &enet2;
26 ethernet3 = &enet3;
27 pci1 = &pci1;
28 rapidio0 = &rio0;
29 };
30
31 cpus {
32 #address-cells = <1>;
33 #size-cells = <0>;
34
35 PowerPC,8569@0 {
36 device_type = "cpu";
37 reg = <0x0>;
38 d-cache-line-size = <32>; // 32 bytes
39 i-cache-line-size = <32>; // 32 bytes
40 d-cache-size = <0x8000>; // L1, 32K
41 i-cache-size = <0x8000>; // L1, 32K
42 timebase-frequency = <0>;
43 bus-frequency = <0>;
44 clock-frequency = <0>;
45 next-level-cache = <&L2>;
46 };
47 };
48
49 memory {
50 device_type = "memory";
51 };
52
53 localbus@e0005000 {
54 #address-cells = <2>;
55 #size-cells = <1>;
56 compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus";
57 reg = <0xe0005000 0x1000>;
58 interrupts = <19 2>;
59 interrupt-parent = <&mpic>;
60
61 ranges = <0x0 0x0 0xfe000000 0x02000000
62 0x1 0x0 0xf8000000 0x00008000
63 0x2 0x0 0xf0000000 0x04000000
64 0x3 0x0 0xfc000000 0x00008000
65 0x4 0x0 0xf8008000 0x00008000
66 0x5 0x0 0xf8010000 0x00008000>;
67
68 nor@0,0 {
69 #address-cells = <1>;
70 #size-cells = <1>;
71 compatible = "cfi-flash";
72 reg = <0x0 0x0 0x02000000>;
73 bank-width = <2>;
74 device-width = <1>;
75 };
76
77 bcsr@1,0 {
78 compatible = "fsl,mpc8569mds-bcsr";
79 reg = <1 0 0x8000>;
80 };
81
82 nand@3,0 {
83 compatible = "fsl,mpc8569-fcm-nand",
84 "fsl,elbc-fcm-nand";
85 reg = <3 0 0x8000>;
86 };
87
88 pib@4,0 {
89 compatible = "fsl,mpc8569mds-pib";
90 reg = <4 0 0x8000>;
91 };
92
93 pib@5,0 {
94 compatible = "fsl,mpc8569mds-pib";
95 reg = <5 0 0x8000>;
96 };
97 };
98
99 soc@e0000000 {
100 #address-cells = <1>;
101 #size-cells = <1>;
102 device_type = "soc";
103 compatible = "fsl,mpc8569-immr", "simple-bus";
104 ranges = <0x0 0xe0000000 0x100000>;
105 bus-frequency = <0>;
106
107 ecm-law@0 {
108 compatible = "fsl,ecm-law";
109 reg = <0x0 0x1000>;
110 fsl,num-laws = <10>;
111 };
112
113 ecm@1000 {
114 compatible = "fsl,mpc8569-ecm", "fsl,ecm";
115 reg = <0x1000 0x1000>;
116 interrupts = <17 2>;
117 interrupt-parent = <&mpic>;
118 };
119
120 memory-controller@2000 {
121 compatible = "fsl,mpc8569-memory-controller";
122 reg = <0x2000 0x1000>;
123 interrupt-parent = <&mpic>;
124 interrupts = <18 2>;
125 };
126
127 i2c@3000 {
128 #address-cells = <1>;
129 #size-cells = <0>;
130 cell-index = <0>;
131 compatible = "fsl-i2c";
132 reg = <0x3000 0x100>;
133 interrupts = <43 2>;
134 interrupt-parent = <&mpic>;
135 dfsrr;
136
137 rtc@68 {
138 compatible = "dallas,ds1374";
139 reg = <0x68>;
140 };
141 };
142
143 i2c@3100 {
144 #address-cells = <1>;
145 #size-cells = <0>;
146 cell-index = <1>;
147 compatible = "fsl-i2c";
148 reg = <0x3100 0x100>;
149 interrupts = <43 2>;
150 interrupt-parent = <&mpic>;
151 dfsrr;
152 };
153
154 serial0: serial@4500 {
155 cell-index = <0>;
156 device_type = "serial";
157 compatible = "ns16550";
158 reg = <0x4500 0x100>;
159 clock-frequency = <0>;
160 interrupts = <42 2>;
161 interrupt-parent = <&mpic>;
162 };
163
164 serial1: serial@4600 {
165 cell-index = <1>;
166 device_type = "serial";
167 compatible = "ns16550";
168 reg = <0x4600 0x100>;
169 clock-frequency = <0>;
170 interrupts = <42 2>;
171 interrupt-parent = <&mpic>;
172 };
173
174 L2: l2-cache-controller@20000 {
175 compatible = "fsl,mpc8569-l2-cache-controller";
176 reg = <0x20000 0x1000>;
177 cache-line-size = <32>; // 32 bytes
178 cache-size = <0x80000>; // L2, 512K
179 interrupt-parent = <&mpic>;
180 interrupts = <16 2>;
181 };
182
183 dma@21300 {
184 #address-cells = <1>;
185 #size-cells = <1>;
186 compatible = "fsl,mpc8569-dma", "fsl,eloplus-dma";
187 reg = <0x21300 0x4>;
188 ranges = <0x0 0x21100 0x200>;
189 cell-index = <0>;
190 dma-channel@0 {
191 compatible = "fsl,mpc8569-dma-channel",
192 "fsl,eloplus-dma-channel";
193 reg = <0x0 0x80>;
194 cell-index = <0>;
195 interrupt-parent = <&mpic>;
196 interrupts = <20 2>;
197 };
198 dma-channel@80 {
199 compatible = "fsl,mpc8569-dma-channel",
200 "fsl,eloplus-dma-channel";
201 reg = <0x80 0x80>;
202 cell-index = <1>;
203 interrupt-parent = <&mpic>;
204 interrupts = <21 2>;
205 };
206 dma-channel@100 {
207 compatible = "fsl,mpc8569-dma-channel",
208 "fsl,eloplus-dma-channel";
209 reg = <0x100 0x80>;
210 cell-index = <2>;
211 interrupt-parent = <&mpic>;
212 interrupts = <22 2>;
213 };
214 dma-channel@180 {
215 compatible = "fsl,mpc8569-dma-channel",
216 "fsl,eloplus-dma-channel";
217 reg = <0x180 0x80>;
218 cell-index = <3>;
219 interrupt-parent = <&mpic>;
220 interrupts = <23 2>;
221 };
222 };
223
224 sdhci@2e000 {
225 compatible = "fsl,mpc8569-esdhc", "fsl,esdhc";
226 reg = <0x2e000 0x1000>;
227 interrupts = <72 0x8>;
228 interrupt-parent = <&mpic>;
229 /* Filled in by U-Boot */
230 clock-frequency = <0>;
231 status = "disabled";
232 };
233
234 crypto@30000 {
235 compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
236 "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
237 reg = <0x30000 0x10000>;
238 interrupts = <45 2 58 2>;
239 interrupt-parent = <&mpic>;
240 fsl,num-channels = <4>;
241 fsl,channel-fifo-len = <24>;
242 fsl,exec-units-mask = <0xbfe>;
243 fsl,descriptor-types-mask = <0x3ab0ebf>;
244 };
245
246 mpic: pic@40000 {
247 interrupt-controller;
248 #address-cells = <0>;
249 #interrupt-cells = <2>;
250 reg = <0x40000 0x40000>;
251 compatible = "chrp,open-pic";
252 device_type = "open-pic";
253 };
254
255 msi@41600 {
256 compatible = "fsl,mpc8568-msi", "fsl,mpic-msi";
257 reg = <0x41600 0x80>;
258 msi-available-ranges = <0 0x100>;
259 interrupts = <
260 0xe0 0
261 0xe1 0
262 0xe2 0
263 0xe3 0
264 0xe4 0
265 0xe5 0
266 0xe6 0
267 0xe7 0>;
268 interrupt-parent = <&mpic>;
269 };
270
271 global-utilities@e0000 {
272 compatible = "fsl,mpc8569-guts";
273 reg = <0xe0000 0x1000>;
274 fsl,has-rstcr;
275 };
276
277 par_io@e0100 {
278 #address-cells = <1>;
279 #size-cells = <1>;
280 reg = <0xe0100 0x100>;
281 ranges = <0x0 0xe0100 0x100>;
282 device_type = "par_io";
283 num-ports = <7>;
284
285 qe_pio_e: gpio-controller@80 {
286 #gpio-cells = <2>;
287 compatible = "fsl,mpc8569-qe-pario-bank",
288 "fsl,mpc8323-qe-pario-bank";
289 reg = <0x80 0x18>;
290 gpio-controller;
291 };
292
293 pio1: ucc_pin@01 {
294 pio-map = <
295 /* port pin dir open_drain assignment has_irq */
296 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
297 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */
298 0x2 0x0b 0x2 0x0 0x1 0x0 /* CLK12*/
299 0x0 0x0 0x1 0x0 0x3 0x0 /* ENET1_TXD0_SER1_TXD0 */
300 0x0 0x1 0x1 0x0 0x3 0x0 /* ENET1_TXD1_SER1_TXD1 */
301 0x0 0x2 0x1 0x0 0x1 0x0 /* ENET1_TXD2_SER1_TXD2 */
302 0x0 0x3 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */
303 0x0 0x6 0x2 0x0 0x3 0x0 /* ENET1_RXD0_SER1_RXD0 */
304 0x0 0x7 0x2 0x0 0x1 0x0 /* ENET1_RXD1_SER1_RXD1 */
305 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */
306 0x0 0x9 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */
307 0x0 0x4 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */
308 0x0 0xc 0x2 0x0 0x3 0x0 /* ENET1_RX_DV_SER1_CTS_B */
309 0x2 0x8 0x2 0x0 0x1 0x0 /* ENET1_GRXCLK */
310 0x2 0x14 0x1 0x0 0x2 0x0>; /* ENET1_GTXCLK */
311 };
312
313 pio2: ucc_pin@02 {
314 pio-map = <
315 /* port pin dir open_drain assignment has_irq */
316 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
317 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */
318 0x2 0x10 0x2 0x0 0x3 0x0 /* CLK17 */
319 0x0 0xe 0x1 0x0 0x2 0x0 /* ENET2_TXD0_SER2_TXD0 */
320 0x0 0xf 0x1 0x0 0x2 0x0 /* ENET2_TXD1_SER2_TXD1 */
321 0x0 0x10 0x1 0x0 0x1 0x0 /* ENET2_TXD2_SER2_TXD2 */
322 0x0 0x11 0x1 0x0 0x1 0x0 /* ENET2_TXD3_SER2_TXD3 */
323 0x0 0x14 0x2 0x0 0x2 0x0 /* ENET2_RXD0_SER2_RXD0 */
324 0x0 0x15 0x2 0x0 0x1 0x0 /* ENET2_RXD1_SER2_RXD1 */
325 0x0 0x16 0x2 0x0 0x1 0x0 /* ENET2_RXD2_SER2_RXD2 */
326 0x0 0x17 0x2 0x0 0x1 0x0 /* ENET2_RXD3_SER2_RXD3 */
327 0x0 0x12 0x1 0x0 0x2 0x0 /* ENET2_TX_EN_SER2_RTS_B */
328 0x0 0x1a 0x2 0x0 0x3 0x0 /* ENET2_RX_DV_SER2_CTS_B */
329 0x2 0x3 0x2 0x0 0x1 0x0 /* ENET2_GRXCLK */
330 0x2 0x2 0x1 0x0 0x2 0x0>; /* ENET2_GTXCLK */
331 };
332
333 pio3: ucc_pin@03 {
334 pio-map = <
335 /* port pin dir open_drain assignment has_irq */
336 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
337 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */
338 0x2 0x0b 0x2 0x0 0x1 0x0 /* CLK12*/
339 0x0 0x1d 0x1 0x0 0x2 0x0 /* ENET3_TXD0_SER3_TXD0 */
340 0x0 0x1e 0x1 0x0 0x3 0x0 /* ENET3_TXD1_SER3_TXD1 */
341 0x0 0x1f 0x1 0x0 0x2 0x0 /* ENET3_TXD2_SER3_TXD2 */
342 0x1 0x0 0x1 0x0 0x3 0x0 /* ENET3_TXD3_SER3_TXD3 */
343 0x1 0x3 0x2 0x0 0x3 0x0 /* ENET3_RXD0_SER3_RXD0 */
344 0x1 0x4 0x2 0x0 0x1 0x0 /* ENET3_RXD1_SER3_RXD1 */
345 0x1 0x5 0x2 0x0 0x2 0x0 /* ENET3_RXD2_SER3_RXD2 */
346 0x1 0x6 0x2 0x0 0x3 0x0 /* ENET3_RXD3_SER3_RXD3 */
347 0x1 0x1 0x1 0x0 0x1 0x0 /* ENET3_TX_EN_SER3_RTS_B */
348 0x1 0x9 0x2 0x0 0x3 0x0 /* ENET3_RX_DV_SER3_CTS_B */
349 0x2 0x9 0x2 0x0 0x2 0x0 /* ENET3_GRXCLK */
350 0x2 0x19 0x1 0x0 0x2 0x0>; /* ENET3_GTXCLK */
351 };
352
353 pio4: ucc_pin@04 {
354 pio-map = <
355 /* port pin dir open_drain assignment has_irq */
356 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
357 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */
358 0x2 0x10 0x2 0x0 0x3 0x0 /* CLK17 */
359 0x1 0xc 0x1 0x0 0x2 0x0 /* ENET4_TXD0_SER4_TXD0 */
360 0x1 0xd 0x1 0x0 0x2 0x0 /* ENET4_TXD1_SER4_TXD1 */
361 0x1 0xe 0x1 0x0 0x1 0x0 /* ENET4_TXD2_SER4_TXD2 */
362 0x1 0xf 0x1 0x0 0x2 0x0 /* ENET4_TXD3_SER4_TXD3 */
363 0x1 0x12 0x2 0x0 0x2 0x0 /* ENET4_RXD0_SER4_RXD0 */
364 0x1 0x13 0x2 0x0 0x1 0x0 /* ENET4_RXD1_SER4_RXD1 */
365 0x1 0x14 0x2 0x0 0x1 0x0 /* ENET4_RXD2_SER4_RXD2 */
366 0x1 0x15 0x2 0x0 0x2 0x0 /* ENET4_RXD3_SER4_RXD3 */
367 0x1 0x10 0x1 0x0 0x2 0x0 /* ENET4_TX_EN_SER4_RTS_B */
368 0x1 0x18 0x2 0x0 0x3 0x0 /* ENET4_RX_DV_SER4_CTS_B */
369 0x2 0x11 0x2 0x0 0x2 0x0 /* ENET4_GRXCLK */
370 0x2 0x18 0x1 0x0 0x2 0x0>; /* ENET4_GTXCLK */
371 };
372 };
373 };
374
375 qe@e0080000 {
376 #address-cells = <1>;
377 #size-cells = <1>;
378 device_type = "qe";
379 compatible = "fsl,qe";
380 ranges = <0x0 0xe0080000 0x40000>;
381 reg = <0xe0080000 0x480>;
382 brg-frequency = <0>;
383 bus-frequency = <0>;
384 fsl,qe-num-riscs = <4>;
385 fsl,qe-num-snums = <46>;
386
387 qeic: interrupt-controller@80 {
388 interrupt-controller;
389 compatible = "fsl,qe-ic";
390 #address-cells = <0>;
391 #interrupt-cells = <1>;
392 reg = <0x80 0x80>;
393 interrupts = <46 2 46 2>; //high:30 low:30
394 interrupt-parent = <&mpic>;
395 };
396
397 spi@4c0 {
398 #address-cells = <1>;
399 #size-cells = <0>;
400 compatible = "fsl,mpc8569-qe-spi", "fsl,spi";
401 reg = <0x4c0 0x40>;
402 cell-index = <0>;
403 interrupts = <2>;
404 interrupt-parent = <&qeic>;
405 gpios = <&qe_pio_e 30 0>;
406 mode = "cpu-qe";
407
408 serial-flash@0 {
409 compatible = "stm,m25p40";
410 reg = <0>;
411 spi-max-frequency = <25000000>;
412 };
413 };
414
415 spi@500 {
416 cell-index = <1>;
417 compatible = "fsl,spi";
418 reg = <0x500 0x40>;
419 interrupts = <1>;
420 interrupt-parent = <&qeic>;
421 mode = "cpu";
422 };
423
424 enet0: ucc@2000 {
425 device_type = "network";
426 compatible = "ucc_geth";
427 cell-index = <1>;
428 reg = <0x2000 0x200>;
429 interrupts = <32>;
430 interrupt-parent = <&qeic>;
431 local-mac-address = [ 00 00 00 00 00 00 ];
432 rx-clock-name = "none";
433 tx-clock-name = "clk12";
434 pio-handle = <&pio1>;
435 phy-handle = <&qe_phy0>;
436 phy-connection-type = "rgmii-id";
437 };
438
439 mdio@2120 {
440 #address-cells = <1>;
441 #size-cells = <0>;
442 reg = <0x2120 0x18>;
443 compatible = "fsl,ucc-mdio";
444
445 qe_phy0: ethernet-phy@07 {
446 interrupt-parent = <&mpic>;
447 interrupts = <1 1>;
448 reg = <0x7>;
449 device_type = "ethernet-phy";
450 };
451 qe_phy1: ethernet-phy@01 {
452 interrupt-parent = <&mpic>;
453 interrupts = <2 1>;
454 reg = <0x1>;
455 device_type = "ethernet-phy";
456 };
457 qe_phy2: ethernet-phy@02 {
458 interrupt-parent = <&mpic>;
459 interrupts = <3 1>;
460 reg = <0x2>;
461 device_type = "ethernet-phy";
462 };
463 qe_phy3: ethernet-phy@03 {
464 interrupt-parent = <&mpic>;
465 interrupts = <4 1>;
466 reg = <0x3>;
467 device_type = "ethernet-phy";
468 };
469 };
470
471 enet2: ucc@2200 {
472 device_type = "network";
473 compatible = "ucc_geth";
474 cell-index = <3>;
475 reg = <0x2200 0x200>;
476 interrupts = <34>;
477 interrupt-parent = <&qeic>;
478 local-mac-address = [ 00 00 00 00 00 00 ];
479 rx-clock-name = "none";
480 tx-clock-name = "clk12";
481 pio-handle = <&pio3>;
482 phy-handle = <&qe_phy2>;
483 phy-connection-type = "rgmii-id";
484 };
485
486 enet1: ucc@3000 {
487 device_type = "network";
488 compatible = "ucc_geth";
489 cell-index = <2>;
490 reg = <0x3000 0x200>;
491 interrupts = <33>;
492 interrupt-parent = <&qeic>;
493 local-mac-address = [ 00 00 00 00 00 00 ];
494 rx-clock-name = "none";
495 tx-clock-name = "clk17";
496 pio-handle = <&pio2>;
497 phy-handle = <&qe_phy1>;
498 phy-connection-type = "rgmii-id";
499 };
500
501 enet3: ucc@3200 {
502 device_type = "network";
503 compatible = "ucc_geth";
504 cell-index = <4>;
505 reg = <0x3200 0x200>;
506 interrupts = <35>;
507 interrupt-parent = <&qeic>;
508 local-mac-address = [ 00 00 00 00 00 00 ];
509 rx-clock-name = "none";
510 tx-clock-name = "clk17";
511 pio-handle = <&pio4>;
512 phy-handle = <&qe_phy3>;
513 phy-connection-type = "rgmii-id";
514 };
515
516 muram@10000 {
517 #address-cells = <1>;
518 #size-cells = <1>;
519 compatible = "fsl,qe-muram", "fsl,cpm-muram";
520 ranges = <0x0 0x10000 0x20000>;
521
522 data-only@0 {
523 compatible = "fsl,qe-muram-data",
524 "fsl,cpm-muram-data";
525 reg = <0x0 0x20000>;
526 };
527 };
528
529 };
530
531 /* PCI Express */
532 pci1: pcie@e000a000 {
533 compatible = "fsl,mpc8548-pcie";
534 device_type = "pci";
535 #interrupt-cells = <1>;
536 #size-cells = <2>;
537 #address-cells = <3>;
538 reg = <0xe000a000 0x1000>;
539 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
540 interrupt-map = <
541 /* IDSEL 0x0 (PEX) */
542 00000 0x0 0x0 0x1 &mpic 0x0 0x1
543 00000 0x0 0x0 0x2 &mpic 0x1 0x1
544 00000 0x0 0x0 0x3 &mpic 0x2 0x1
545 00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
546
547 interrupt-parent = <&mpic>;
548 interrupts = <26 2>;
549 bus-range = <0 255>;
550 ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
551 0x1000000 0x0 0x00000000 0xe2800000 0x0 0x00800000>;
552 clock-frequency = <33333333>;
553 pcie@0 {
554 reg = <0x0 0x0 0x0 0x0 0x0>;
555 #size-cells = <2>;
556 #address-cells = <3>;
557 device_type = "pci";
558 ranges = <0x2000000 0x0 0xa0000000
559 0x2000000 0x0 0xa0000000
560 0x0 0x10000000
561
562 0x1000000 0x0 0x0
563 0x1000000 0x0 0x0
564 0x0 0x800000>;
565 };
566 };
567
568 rio0: rapidio@e00c00000 {
569 #address-cells = <2>;
570 #size-cells = <2>;
571 compatible = "fsl,mpc8569-rapidio", "fsl,rapidio-delta";
572 reg = <0xe00c0000 0x20000>;
573 ranges = <0x0 0x0 0xc0000000 0x0 0x20000000>;
574 interrupts = <48 2 /* error */
575 49 2 /* bell_outb */
576 50 2 /* bell_inb */
577 53 2 /* msg1_tx */
578 54 2 /* msg1_rx */
579 55 2 /* msg2_tx */
580 56 2 /* msg2_rx */>;
581 interrupt-parent = <&mpic>;
582 };
583 };
This page took 0.054482 seconds and 5 git commands to generate.