arch/powerpc/boot/dts/p1021mds.dts

   1 /*
   2  * P1021 MDS Device Tree Source
   3  *
   4  * Copyright 2010,2012 Freescale Semiconductor Inc.
   5  *
   6  * This program is free software; you can redistribute it and/or modify it
   7  * under the terms of the GNU General Public License as published by the
   8  * Free Software Foundation; either version 2 of the License, or (at your
   9  * option) any later version.
  10  */
  11
  12 /include/ "fsl/p1021si-pre.dtsi"
  13 / {
  14         model = "fsl,P1021";
  15         compatible = "fsl,P1021MDS";
  16
  17         aliases {
  18                 ethernet3 = &enet3;
  19                 ethernet4 = &enet4;
  20         };
  21
  22         memory {
  23                 device_type = "memory";
  24         };
  25
  26         lbc: localbus@ffe05000 {
  27                 reg = <0x0 0xffe05000 0x0 0x1000>;
  28
  29                 /* NAND Flash, BCSR, PMC0/1*/
  30                 ranges = <0x0 0x0 0x0 0xfc000000 0x02000000
  31                           0x1 0x0 0x0 0xf8000000 0x00008000
  32                           0x2 0x0 0x0 0xf8010000 0x00020000
  33                           0x3 0x0 0x0 0xf8020000 0x00020000>;
  34
  35                 nand@0,0 {
  36                         #address-cells = <1>;
  37                         #size-cells = <1>;
  38                         compatible = "fsl,p1021-fcm-nand",
  39                                      "fsl,elbc-fcm-nand";
  40                         reg = <0x0 0x0 0x40000>;
  41
  42                         partition@0 {
  43                                 /* This location must not be altered  */
  44                                 /* 1MB for u-boot Bootloader Image */
  45                                 reg = <0x0 0x00100000>;
  46                                 label = "NAND (RO) U-Boot Image";
  47                                 read-only;
  48                         };
  49
  50                         partition@100000 {
  51                                 /* 1MB for DTB Image */
  52                                 reg = <0x00100000 0x00100000>;
  53                                 label = "NAND (RO) DTB Image";
  54                                 read-only;
  55                         };
  56
  57                         partition@200000 {
  58                                 /* 4MB for Linux Kernel Image */
  59                                 reg = <0x00200000 0x00400000>;
  60                                 label = "NAND (RO) Linux Kernel Image";
  61                                 read-only;
  62                         };
  63
  64                         partition@600000 {
  65                                 /* 5MB for Compressed Root file System Image */
  66                                 reg = <0x00600000 0x00500000>;
  67                                 label = "NAND (RO) Compressed RFS Image";
  68                                 read-only;
  69                         };
  70
  71                         partition@b00000 {
  72                                 /* 6MB for JFFS2 based Root file System */
  73                                 reg = <0x00a00000 0x00600000>;
  74                                 label = "NAND (RW) JFFS2 Root File System";
  75                         };
  76
  77                         partition@1100000 {
  78                                 /* 14MB for JFFS2 based Root file System */
  79                                 reg = <0x01100000 0x00e00000>;
  80                                 label = "NAND (RW) Writable User area";
  81                         };
  82
  83                         partition@1f00000 {
  84                                 /* 1MB for microcode */
  85                                 reg = <0x01f00000 0x00100000>;
  86                                 label = "NAND (RO) QE Ucode";
  87                                 read-only;
  88                         };
  89                 };
  90
  91                 bcsr@1,0 {
  92                         #address-cells = <1>;
  93                         #size-cells = <1>;
  94                         compatible = "fsl,p1021mds-bcsr";
  95                         reg = <1 0 0x8000>;
  96                         ranges = <0 1 0 0x8000>;
  97                 };
  98
  99                 pib@2,0 {
 100                         compatible = "fsl,p1021mds-pib";
 101                         reg = <2 0 0x10000>;
 102                 };
 103
 104                 pib@3,0 {
 105                         compatible = "fsl,p1021mds-pib";
 106                         reg = <3 0 0x10000>;
 107                 };
 108         };
 109
 110         soc: soc@ffe00000 {
 111                 compatible = "fsl,p1021-immr", "simple-bus";
 112                 ranges = <0x0 0x0 0xffe00000 0x100000>;
 113
 114                 i2c@3000 {
 115                         rtc@68 {
 116                                 compatible = "dallas,ds1374";
 117                                 reg = <0x68>;
 118                         };
 119                 };
 120
 121                 spi@7000 {
 122
 123                         flash@0 {
 124                                 #address-cells = <1>;
 125                                 #size-cells = <1>;
 126                                 compatible = "spansion,s25sl12801";
 127                                 reg = <0>;
 128                                 spi-max-frequency = <40000000>; /* input clock */
 129
 130                                 partition@u-boot {
 131                                         label = "u-boot-spi";
 132                                         reg = <0x00000000 0x00100000>;
 133                                         read-only;
 134                                 };
 135                                 partition@kernel {
 136                                         label = "kernel-spi";
 137                                         reg = <0x00100000 0x00500000>;
 138                                         read-only;
 139                                 };
 140                                 partition@dtb {
 141                                         label = "dtb-spi";
 142                                         reg = <0x00600000 0x00100000>;
 143                                         read-only;
 144                                 };
 145                                 partition@fs {
 146                                         label = "file system-spi";
 147                                         reg = <0x00700000 0x00900000>;
 148                                 };
 149                         };
 150                 };
 151
 152                 usb@22000 {
 153                         phy_type = "ulpi";
 154                         dr_mode = "host";
 155                 };
 156
 157                 mdio@24000 {
 158                         phy0: ethernet-phy@0 {
 159                                 interrupts = <1 1 0 0>;
 160                                 reg = <0x0>;
 161                         };
 162                         phy1: ethernet-phy@1 {
 163                                 interrupts = <2 1 0 0>;
 164                                 reg = <0x1>;
 165                         };
 166                         phy4: ethernet-phy@4 {
 167                                 reg = <0x4>;
 168                         };
 169                         tbi-phy@5 {
 170                                 device_type = "tbi-phy";
 171                                 reg = <0x5>;
 172                         };
 173                 };
 174
 175                 mdio@25000 {
 176                         tbi0: tbi-phy@11 {
 177                                 reg = <0x11>;
 178                                 device_type = "tbi-phy";
 179                         };
 180                 };
 181
 182                 ethernet@b0000 {
 183                         phy-handle = <&phy0>;
 184                         phy-connection-type = "rgmii-id";
 185                 };
 186
 187                 ethernet@b1000 {
 188                         phy-handle = <&phy4>;
 189                         tbi-handle = <&tbi0>;
 190                         phy-connection-type = "sgmii";
 191                 };
 192
 193                 ethernet@b2000 {
 194                         phy-handle = <&phy1>;
 195                         phy-connection-type = "rgmii-id";
 196                 };
 197
 198                 par_io@e0100 {
 199                         #address-cells = <1>;
 200                         #size-cells = <1>;
 201                         reg = <0xe0100 0x60>;
 202                         ranges = <0x0 0xe0100 0x60>;
 203                         device_type = "par_io";
 204                         num-ports = <3>;
 205                         pio1: ucc_pin@01 {
 206                                 pio-map = <
 207                         /* port  pin  dir  open_drain  assignment  has_irq */
 208                                         0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
 209                                         0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
 210                                         0x0  0x17 0x2  0x0  0x2  0x0    /* CLK12 */
 211                                         0x0  0x18 0x2  0x0  0x1  0x0    /* CLK9 */
 212                                         0x0  0x7  0x1  0x0  0x2  0x0    /* ENET1_TXD0_SER1_TXD0 */
 213                                         0x0  0x9  0x1  0x0  0x2  0x0    /* ENET1_TXD1_SER1_TXD1 */
 214                                         0x0  0xb  0x1  0x0  0x2  0x0    /* ENET1_TXD2_SER1_TXD2 */
 215                                         0x0  0xc  0x1  0x0  0x2  0x0    /* ENET1_TXD3_SER1_TXD3 */
 216                                         0x0  0x6  0x2  0x0  0x2  0x0    /* ENET1_RXD0_SER1_RXD0 */
 217                                         0x0  0xa  0x2  0x0  0x2  0x0    /* ENET1_RXD1_SER1_RXD1 */
 218                                         0x0  0xe  0x2  0x0  0x2  0x0    /* ENET1_RXD2_SER1_RXD2 */
 219                                         0x0  0xf  0x2  0x0  0x2  0x0    /* ENET1_RXD3_SER1_RXD3 */
 220                                         0x0  0x5  0x1  0x0  0x2  0x0    /* ENET1_TX_EN_SER1_RTS_B */
 221                                         0x0  0xd  0x1  0x0  0x2  0x0    /* ENET1_TX_ER */
 222                                         0x0  0x4  0x2  0x0  0x2  0x0    /* ENET1_RX_DV_SER1_CTS_B */
 223                                         0x0  0x8  0x2  0x0  0x2  0x0    /* ENET1_RX_ER_SER1_CD_B */
 224                                         0x0  0x11 0x2  0x0  0x2  0x0    /* ENET1_CRS */
 225                                         0x0  0x10 0x2  0x0  0x2  0x0>;    /* ENET1_COL */
 226                         };
 227
 228                         pio2: ucc_pin@02 {
 229                                 pio-map = <
 230                         /* port  pin  dir  open_drain  assignment  has_irq */
 231                                         0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
 232                                         0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
 233                                         0x1  0xb  0x2  0x0  0x1  0x0    /* CLK13 */
 234                                         0x1  0x7  0x1  0x0  0x2  0x0    /* ENET5_TXD0_SER5_TXD0 */
 235                                         0x1  0xa  0x1  0x0  0x2  0x0    /* ENET5_TXD1_SER5_TXD1 */
 236                                         0x1  0x6  0x2  0x0  0x2  0x0    /* ENET5_RXD0_SER5_RXD0 */
 237                                         0x1  0x9  0x2  0x0  0x2  0x0    /* ENET5_RXD1_SER5_RXD1 */
 238                                         0x1  0x5  0x1  0x0  0x2  0x0    /* ENET5_TX_EN_SER5_RTS_B */
 239                                         0x1  0x4  0x2  0x0  0x2  0x0    /* ENET5_RX_DV_SER5_CTS_B */
 240                                         0x1  0x8  0x2  0x0  0x2  0x0>;    /* ENET5_RX_ER_SER5_CD_B */
 241                         };
 242                 };
 243         };
 244
 245         pci0: pcie@ffe09000 {
 246                 reg = <0 0xffe09000 0 0x1000>;
 247                 ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
 248                           0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
 249                 pcie@0 {
 250                         ranges = <0x2000000 0x0 0xa0000000
 251                                   0x2000000 0x0 0xa0000000
 252                                   0x0 0x20000000
 253
 254                                   0x1000000 0x0 0x0
 255                                   0x1000000 0x0 0x0
 256                                   0x0 0x100000>;
 257                 };
 258         };
 259
 260         pci1: pcie@ffe0a000 {
 261                 reg = <0 0xffe0a000 0 0x1000>;
 262                 ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
 263                           0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
 264                 pcie@0 {
 265                         ranges = <0x2000000 0x0 0xc0000000
 266                                   0x2000000 0x0 0xc0000000
 267                                   0x0 0x20000000
 268
 269                                   0x1000000 0x0 0x0
 270                                   0x1000000 0x0 0x0
 271                                   0x0 0x100000>;
 272                 };
 273         };
 274
 275         qe: qe@ffe80000 {
 276                 ranges = <0x0 0x0 0xffe80000 0x40000>;
 277                 reg = <0 0xffe80000 0 0x480>;
 278                 brg-frequency = <0>;
 279                 bus-frequency = <0>;
 280                 status = "disabled"; /* no firmware loaded */
 281
 282                 enet3: ucc@2000 {
 283                         device_type = "network";
 284                         compatible = "ucc_geth";
 285                         local-mac-address = [ 00 00 00 00 00 00 ];
 286                         rx-clock-name = "clk12";
 287                         tx-clock-name = "clk9";
 288                         pio-handle = <&pio1>;
 289                         phy-handle = <&qe_phy0>;
 290                         phy-connection-type = "mii";
 291                 };
 292
 293                 mdio@2120 {
 294                         qe_phy0: ethernet-phy@0 {
 295                                 interrupt-parent = <&mpic>;
 296                                 interrupts = <4 1 0 0>;
 297                                 reg = <0x0>;
 298                         };
 299                         qe_phy1: ethernet-phy@03 {
 300                                 interrupt-parent = <&mpic>;
 301                                 interrupts = <5 1 0 0>;
 302                                 reg = <0x3>;
 303                         };
 304                         tbi-phy@11 {
 305                                 reg = <0x11>;
 306                                 device_type = "tbi-phy";
 307                         };
 308                 };
 309
 310                 enet4: ucc@2400 {
 311                         device_type = "network";
 312                         compatible = "ucc_geth";
 313                         local-mac-address = [ 00 00 00 00 00 00 ];
 314                         rx-clock-name = "none";
 315                         tx-clock-name = "clk13";
 316                         pio-handle = <&pio2>;
 317                         phy-handle = <&qe_phy1>;
 318                         phy-connection-type = "rmii";
 319                 };
 320         };
 321 };
 322
 323 /include/ "fsl/p1021si-post.dtsi"