powerpc/eeh: Check handle_eeh_events() return value
[deliverable/linux.git] / arch / powerpc / boot / dts / p1021rdb.dtsi
1 /*
2 * P1021 RDB Device Tree Source stub (no addresses or top-level ranges)
3 *
4 * Copyright 2011 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 * * Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * * Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * * Neither the name of Freescale Semiconductor nor the
14 * names of its contributors may be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35 &lbc {
36 nor@0,0 {
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "cfi-flash";
40 reg = <0x0 0x0 0x1000000>;
41 bank-width = <2>;
42 device-width = <1>;
43
44 partition@0 {
45 /* This location must not be altered */
46 /* 256KB for Vitesse 7385 Switch firmware */
47 reg = <0x0 0x00040000>;
48 label = "NOR Vitesse-7385 Firmware";
49 read-only;
50 };
51
52 partition@40000 {
53 /* 256KB for DTB Image */
54 reg = <0x00040000 0x00040000>;
55 label = "NOR DTB Image";
56 };
57
58 partition@80000 {
59 /* 3.5 MB for Linux Kernel Image */
60 reg = <0x00080000 0x00380000>;
61 label = "NOR Linux Kernel Image";
62 };
63
64 partition@400000 {
65 /* 11MB for JFFS2 based Root file System */
66 reg = <0x00400000 0x00b00000>;
67 label = "NOR JFFS2 Root File System";
68 };
69
70 partition@f00000 {
71 /* This location must not be altered */
72 /* 512KB for u-boot Bootloader Image */
73 /* 512KB for u-boot Environment Variables */
74 reg = <0x00f00000 0x00100000>;
75 label = "NOR U-Boot Image";
76 };
77 };
78
79 nand@1,0 {
80 #address-cells = <1>;
81 #size-cells = <1>;
82 compatible = "fsl,p1021-fcm-nand",
83 "fsl,elbc-fcm-nand";
84 reg = <0x1 0x0 0x40000>;
85
86 partition@0 {
87 /* This location must not be altered */
88 /* 1MB for u-boot Bootloader Image */
89 reg = <0x0 0x00100000>;
90 label = "NAND U-Boot Image";
91 read-only;
92 };
93
94 partition@100000 {
95 /* 1MB for DTB Image */
96 reg = <0x00100000 0x00100000>;
97 label = "NAND DTB Image";
98 };
99
100 partition@200000 {
101 /* 4MB for Linux Kernel Image */
102 reg = <0x00200000 0x00400000>;
103 label = "NAND Linux Kernel Image";
104 };
105
106 partition@600000 {
107 /* 4MB for Compressed Root file System Image */
108 reg = <0x00600000 0x00400000>;
109 label = "NAND Compressed RFS Image";
110 };
111
112 partition@a00000 {
113 /* 7MB for JFFS2 based Root file System */
114 reg = <0x00a00000 0x00700000>;
115 label = "NAND JFFS2 Root File System";
116 };
117
118 partition@1100000 {
119 /* 15MB for User Writable Area */
120 reg = <0x01100000 0x00f00000>;
121 label = "NAND Writable User area";
122 };
123 };
124
125 L2switch@2,0 {
126 #address-cells = <1>;
127 #size-cells = <1>;
128 compatible = "vitesse-7385";
129 reg = <0x2 0x0 0x20000>;
130 };
131 };
132
133 &soc {
134 i2c@3000 {
135 rtc@68 {
136 compatible = "pericom,pt7c4338";
137 reg = <0x68>;
138 };
139 };
140
141 spi@7000 {
142 flash@0 {
143 #address-cells = <1>;
144 #size-cells = <1>;
145 compatible = "spansion,s25sl12801";
146 reg = <0>;
147 spi-max-frequency = <40000000>; /* input clock */
148
149 partition@u-boot {
150 /* 512KB for u-boot Bootloader Image */
151 reg = <0x0 0x00080000>;
152 label = "SPI Flash U-Boot Image";
153 read-only;
154 };
155
156 partition@dtb {
157 /* 512KB for DTB Image */
158 reg = <0x00080000 0x00080000>;
159 label = "SPI Flash DTB Image";
160 };
161
162 partition@kernel {
163 /* 4MB for Linux Kernel Image */
164 reg = <0x00100000 0x00400000>;
165 label = "SPI Flash Linux Kernel Image";
166 };
167
168 partition@fs {
169 /* 4MB for Compressed RFS Image */
170 reg = <0x00500000 0x00400000>;
171 label = "SPI Flash Compressed RFSImage";
172 };
173
174 partition@jffs-fs {
175 /* 7MB for JFFS2 based RFS */
176 reg = <0x00900000 0x00700000>;
177 label = "SPI Flash JFFS2 RFS";
178 };
179 };
180 };
181
182 usb@22000 {
183 phy_type = "ulpi";
184 };
185
186 mdio@24000 {
187 phy0: ethernet-phy@0 {
188 interrupt-parent = <&mpic>;
189 interrupts = <3 1 0 0>;
190 reg = <0x0>;
191 };
192
193 phy1: ethernet-phy@1 {
194 interrupt-parent = <&mpic>;
195 interrupts = <2 1 0 0>;
196 reg = <0x1>;
197 };
198
199 tbi0: tbi-phy@11 {
200 reg = <0x11>;
201 device_type = "tbi-phy";
202 };
203 };
204
205 mdio@25000 {
206 tbi1: tbi-phy@11 {
207 reg = <0x11>;
208 device_type = "tbi-phy";
209 };
210 };
211
212 mdio@26000 {
213 tbi2: tbi-phy@11 {
214 reg = <0x11>;
215 device_type = "tbi-phy";
216 };
217 };
218
219 enet0: ethernet@b0000 {
220 fixed-link = <1 1 1000 0 0>;
221 phy-connection-type = "rgmii-id";
222
223 };
224
225 enet1: ethernet@b1000 {
226 phy-handle = <&phy0>;
227 tbi-handle = <&tbi1>;
228 phy-connection-type = "sgmii";
229 };
230
231 enet2: ethernet@b2000 {
232 phy-handle = <&phy1>;
233 tbi-handle = <&tbi2>;
234 phy-connection-type = "rgmii-id";
235 };
236 };
This page took 0.054879 seconds and 5 git commands to generate.