arch/powerpc/boot/dts/stx_gp3_8560.dts

   1 /*
   2  * STX GP3 - 8560 ADS Device Tree Source
   3  *
   4  * Copyright 2008 Freescale Semiconductor Inc.
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10  */
  11
  12 /dts-v1/;
  13
  14 / {
  15         model = "stx,gp3";
  16         compatible = "stx,gp3-8560", "stx,gp3";
  17         #address-cells = <1>;
  18         #size-cells = <1>;
  19
  20         aliases {
  21                 ethernet0 = &enet0;
  22                 ethernet1 = &enet1;
  23                 serial0 = &serial0;
  24                 pci0 = &pci0;
  25         };
  26
  27         cpus {
  28                 #address-cells = <1>;
  29                 #size-cells = <0>;
  30
  31                 PowerPC,8560@0 {
  32                         device_type = "cpu";
  33                         reg = <0>;
  34                         d-cache-line-size = <32>;
  35                         i-cache-line-size = <32>;
  36                         d-cache-size = <32768>;
  37                         i-cache-size = <32768>;
  38                         timebase-frequency = <0>;
  39                         bus-frequency = <0>;
  40                         clock-frequency = <0>;
  41                         next-level-cache = <&L2>;
  42                 };
  43         };
  44
  45         memory {
  46                 device_type = "memory";
  47                 reg = <0x00000000 0x10000000>;
  48         };
  49
  50         soc@fdf00000 {
  51                 #address-cells = <1>;
  52                 #size-cells = <1>;
  53                 device_type = "soc";
  54                 ranges = <0 0xfdf00000 0x100000>;
  55                 bus-frequency = <0>;
  56                 compatible = "fsl,mpc8560-immr", "simple-bus";
  57
  58                 ecm-law@0 {
  59                         compatible = "fsl,ecm-law";
  60                         reg = <0x0 0x1000>;
  61                         fsl,num-laws = <8>;
  62                 };
  63
  64                 ecm@1000 {
  65                         compatible = "fsl,mpc8560-ecm", "fsl,ecm";
  66                         reg = <0x1000 0x1000>;
  67                         interrupts = <17 2>;
  68                         interrupt-parent = <&mpic>;
  69                 };
  70
  71                 memory-controller@2000 {
  72                         compatible = "fsl,mpc8540-memory-controller";
  73                         reg = <0x2000 0x1000>;
  74                         interrupt-parent = <&mpic>;
  75                         interrupts = <18 2>;
  76                 };
  77
  78                 L2: l2-cache-controller@20000 {
  79                         compatible = "fsl,mpc8540-l2-cache-controller";
  80                         reg = <0x20000 0x1000>;
  81                         cache-line-size = <32>;
  82                         cache-size = <0x40000>; // L2, 256K
  83                         interrupt-parent = <&mpic>;
  84                         interrupts = <16 2>;
  85                 };
  86
  87                 i2c@3000 {
  88                         #address-cells = <1>;
  89                         #size-cells = <0>;
  90                         cell-index = <0>;
  91                         compatible = "fsl-i2c";
  92                         reg = <0x3000 0x100>;
  93                         interrupts = <43 2>;
  94                         interrupt-parent = <&mpic>;
  95                         dfsrr;
  96                 };
  97
  98                 dma@21300 {
  99                         #address-cells = <1>;
 100                         #size-cells = <1>;
 101                         compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
 102                         reg = <0x21300 0x4>;
 103                         ranges = <0x0 0x21100 0x200>;
 104                         cell-index = <0>;
 105                         dma-channel@0 {
 106                                 compatible = "fsl,mpc8560-dma-channel",
 107                                                 "fsl,eloplus-dma-channel";
 108                                 reg = <0x0 0x80>;
 109                                 cell-index = <0>;
 110                                 interrupt-parent = <&mpic>;
 111                                 interrupts = <20 2>;
 112                         };
 113                         dma-channel@80 {
 114                                 compatible = "fsl,mpc8560-dma-channel",
 115                                                 "fsl,eloplus-dma-channel";
 116                                 reg = <0x80 0x80>;
 117                                 cell-index = <1>;
 118                                 interrupt-parent = <&mpic>;
 119                                 interrupts = <21 2>;
 120                         };
 121                         dma-channel@100 {
 122                                 compatible = "fsl,mpc8560-dma-channel",
 123                                                 "fsl,eloplus-dma-channel";
 124                                 reg = <0x100 0x80>;
 125                                 cell-index = <2>;
 126                                 interrupt-parent = <&mpic>;
 127                                 interrupts = <22 2>;
 128                         };
 129                         dma-channel@180 {
 130                                 compatible = "fsl,mpc8560-dma-channel",
 131                                                 "fsl,eloplus-dma-channel";
 132                                 reg = <0x180 0x80>;
 133                                 cell-index = <3>;
 134                                 interrupt-parent = <&mpic>;
 135                                 interrupts = <23 2>;
 136                         };
 137                 };
 138
 139                 enet0: ethernet@24000 {
 140                         #address-cells = <1>;
 141                         #size-cells = <1>;
 142                         cell-index = <0>;
 143                         device_type = "network";
 144                         model = "TSEC";
 145                         compatible = "gianfar";
 146                         reg = <0x24000 0x1000>;
 147                         ranges = <0x0 0x24000 0x1000>;
 148                         local-mac-address = [ 00 00 00 00 00 00 ];
 149                         interrupts = <29 2 30 2 34 2>;
 150                         interrupt-parent = <&mpic>;
 151                         tbi-handle = <&tbi0>;
 152                         phy-handle = <&phy2>;
 153
 154                         mdio@520 {
 155                                 #address-cells = <1>;
 156                                 #size-cells = <0>;
 157                                 compatible = "fsl,gianfar-mdio";
 158                                 reg = <0x520 0x20>;
 159
 160                                 phy2: ethernet-phy@2 {
 161                                         interrupt-parent = <&mpic>;
 162                                         interrupts = <5 4>;
 163                                         reg = <2>;
 164                                         device_type = "ethernet-phy";
 165                                 };
 166                                 phy4: ethernet-phy@4 {
 167                                         interrupt-parent = <&mpic>;
 168                                         interrupts = <5 4>;
 169                                         reg = <4>;
 170                                         device_type = "ethernet-phy";
 171                                 };
 172                                 tbi0: tbi-phy@11 {
 173                                         reg = <0x11>;
 174                                         device_type = "tbi-phy";
 175                                 };
 176                         };
 177                 };
 178
 179                 enet1: ethernet@25000 {
 180                         #address-cells = <1>;
 181                         #size-cells = <1>;
 182                         cell-index = <1>;
 183                         device_type = "network";
 184                         model = "TSEC";
 185                         compatible = "gianfar";
 186                         reg = <0x25000 0x1000>;
 187                         ranges = <0x0 0x25000 0x1000>;
 188                         local-mac-address = [ 00 00 00 00 00 00 ];
 189                         interrupts = <35 2 36 2 40 2>;
 190                         interrupt-parent = <&mpic>;
 191                         tbi-handle = <&tbi1>;
 192                         phy-handle = <&phy4>;
 193
 194                         mdio@520 {
 195                                 #address-cells = <1>;
 196                                 #size-cells = <0>;
 197                                 compatible = "fsl,gianfar-tbi";
 198                                 reg = <0x520 0x20>;
 199
 200                                 tbi1: tbi-phy@11 {
 201                                         reg = <0x11>;
 202                                         device_type = "tbi-phy";
 203                                 };
 204                         };
 205                 };
 206
 207                 mpic: pic@40000 {
 208                         interrupt-controller;
 209                         #address-cells = <0>;
 210                         #interrupt-cells = <2>;
 211                         reg = <0x40000 0x40000>;
 212                         compatible = "chrp,open-pic";
 213                         device_type = "open-pic";
 214                 };
 215
 216                 cpm@919c0 {
 217                         #address-cells = <1>;
 218                         #size-cells = <1>;
 219                         compatible = "fsl,mpc8560-cpm", "fsl,cpm2", "simple-bus";
 220                         reg = <0x919c0 0x30>;
 221                         ranges;
 222
 223                         muram@80000 {
 224                                 #address-cells = <1>;
 225                                 #size-cells = <1>;
 226                                 ranges = <0 0x80000 0x10000>;
 227
 228                                 data@0 {
 229                                         compatible = "fsl,cpm-muram-data";
 230                                         reg = <0 0x4000 0x9000 0x2000>;
 231                                 };
 232                         };
 233
 234                         brg@919f0 {
 235                                 compatible = "fsl,mpc8560-brg",
 236                                              "fsl,cpm2-brg",
 237                                              "fsl,cpm-brg";
 238                                 reg = <0x919f0 0x10 0x915f0 0x10>;
 239                                 clock-frequency = <0>;
 240                         };
 241
 242                         cpmpic: pic@90c00 {
 243                                 interrupt-controller;
 244                                 #address-cells = <0>;
 245                                 #interrupt-cells = <2>;
 246                                 interrupts = <46 2>;
 247                                 interrupt-parent = <&mpic>;
 248                                 reg = <0x90c00 0x80>;
 249                                 compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
 250                         };
 251
 252                         serial0: serial@91a20 {
 253                                 device_type = "serial";
 254                                 compatible = "fsl,mpc8560-scc-uart",
 255                                              "fsl,cpm2-scc-uart";
 256                                 reg = <0x91a20 0x20 0x88100 0x100>;
 257                                 fsl,cpm-brg = <2>;
 258                                 fsl,cpm-command = <0x4a00000>;
 259                                 interrupts = <41 8>;
 260                                 interrupt-parent = <&cpmpic>;
 261                         };
 262                 };
 263         };
 264
 265         pci0: pci@fdf08000 {
 266                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 267                 interrupt-map = <
 268
 269                         /* IDSEL 0x0c */
 270                         0x6000 0 0 1 &mpic 1 1
 271                         0x6000 0 0 2 &mpic 2 1
 272                         0x6000 0 0 3 &mpic 3 1
 273                         0x6000 0 0 4 &mpic 4 1
 274
 275                         /* IDSEL 0x0d */
 276                         0x6800 0 0 1 &mpic 4 1
 277                         0x6800 0 0 2 &mpic 1 1
 278                         0x6800 0 0 3 &mpic 2 1
 279                         0x6800 0 0 4 &mpic 3 1
 280
 281                         /* IDSEL 0x0e */
 282                         0x7000 0 0 1 &mpic 3 1
 283                         0x7000 0 0 2 &mpic 4 1
 284                         0x7000 0 0 3 &mpic 1 1
 285                         0x7000 0 0 4 &mpic 2 1
 286
 287                         /* IDSEL 0x0f */
 288                         0x7800 0 0 1 &mpic 2 1
 289                         0x7800 0 0 2 &mpic 3 1
 290                         0x7800 0 0 3 &mpic 4 1
 291                         0x7800 0 0 4 &mpic 1 1>;
 292
 293                 interrupt-parent = <&mpic>;
 294                 interrupts = <24 2>;
 295                 bus-range = <0 0>;
 296                 ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
 297                           0x01000000 0 0x00000000 0xe2000000 0 0x00100000>;
 298                 clock-frequency = <66666666>;
 299                 #interrupt-cells = <1>;
 300                 #size-cells = <2>;
 301                 #address-cells = <3>;
 302                 reg = <0xfdf08000 0x1000>;
 303                 compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
 304                 device_type = "pci";
 305         };
 306 };