Merge branch 'sched/urgent' into sched/core

[deliverable/linux.git] / arch / powerpc / kernel / entry_64.S

/*
 *  PowerPC version 
 *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
 *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
 *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
 *  Adapted for Power Macintosh by Paul Mackerras.
 *  Low-level exception handlers and MMU support
 *  rewritten by Paul Mackerras.
 *    Copyright (C) 1996 Paul Mackerras.
 *  MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
 *
 *  This file contains the system call entry code, context switch
 *  code, and exception/interrupt return code for PowerPC.
 *
 *  This program is free software; you can redistribute it and/or
 *  modify it under the terms of the GNU General Public License
 *  as published by the Free Software Foundation; either version
 *  2 of the License, or (at your option) any later version.
 */

#include <linux/errno.h>
#include <asm/unistd.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/cputable.h>
#include <asm/firmware.h>
#include <asm/bug.h>
#include <asm/ptrace.h>
#include <asm/irqflags.h>
#include <asm/ftrace.h>

/*
 * System calls.
 */
        .section        ".toc","aw"
.SYS_CALL_TABLE:
        .tc .sys_call_table[TC],.sys_call_table

/* This value is used to mark exception frames on the stack. */
exception_marker:
        .tc     ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER

        .section        ".text"
        .align 7

#undef SHOW_SYSCALLS

        .globl system_call_common
system_call_common:
        andi.   r10,r12,MSR_PR
        mr      r10,r1
        addi    r1,r1,-INT_FRAME_SIZE
        beq-    1f
        ld      r1,PACAKSAVE(r13)
1:      std     r10,0(r1)
        std     r11,_NIP(r1)
        std     r12,_MSR(r1)
        std     r0,GPR0(r1)
        std     r10,GPR1(r1)
        ACCOUNT_CPU_USER_ENTRY(r10, r11)
        /*
         * This "crclr so" clears CR0.SO, which is the error indication on
         * return from this system call.  There must be no cmp instruction
         * between it and the "mfcr r9" below, otherwise if XER.SO is set,
         * CR0.SO will get set, causing all system calls to appear to fail.
         */
        crclr   so
        std     r2,GPR2(r1)
        std     r3,GPR3(r1)
        std     r4,GPR4(r1)
        std     r5,GPR5(r1)
        std     r6,GPR6(r1)
        std     r7,GPR7(r1)
        std     r8,GPR8(r1)
        li      r11,0
        std     r11,GPR9(r1)
        std     r11,GPR10(r1)
        std     r11,GPR11(r1)
        std     r11,GPR12(r1)
        std     r9,GPR13(r1)
        mfcr    r9
        mflr    r10
        li      r11,0xc01
        std     r9,_CCR(r1)
        std     r10,_LINK(r1)
        std     r11,_TRAP(r1)
        mfxer   r9
        mfctr   r10
        std     r9,_XER(r1)
        std     r10,_CTR(r1)
        std     r3,ORIG_GPR3(r1)
        ld      r2,PACATOC(r13)
        addi    r9,r1,STACK_FRAME_OVERHEAD
        ld      r11,exception_marker@toc(r2)
        std     r11,-16(r9)             /* "regshere" marker */
#ifdef CONFIG_TRACE_IRQFLAGS
        bl      .trace_hardirqs_on
        REST_GPR(0,r1)
        REST_4GPRS(3,r1)
        REST_2GPRS(7,r1)
        addi    r9,r1,STACK_FRAME_OVERHEAD
        ld      r12,_MSR(r1)
#endif /* CONFIG_TRACE_IRQFLAGS */
        li      r10,1
        stb     r10,PACASOFTIRQEN(r13)
        stb     r10,PACAHARDIRQEN(r13)
        std     r10,SOFTE(r1)
#ifdef CONFIG_PPC_ISERIES
BEGIN_FW_FTR_SECTION
        /* Hack for handling interrupts when soft-enabling on iSeries */
        cmpdi   cr1,r0,0x5555           /* syscall 0x5555 */
        andi.   r10,r12,MSR_PR          /* from kernel */
        crand   4*cr0+eq,4*cr1+eq,4*cr0+eq
        bne     2f
        b       hardware_interrupt_entry
2:
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif /* CONFIG_PPC_ISERIES */
        mfmsr   r11
        ori     r11,r11,MSR_EE
        mtmsrd  r11,1

#ifdef SHOW_SYSCALLS
        bl      .do_show_syscall
        REST_GPR(0,r1)
        REST_4GPRS(3,r1)
        REST_2GPRS(7,r1)
        addi    r9,r1,STACK_FRAME_OVERHEAD
#endif
        clrrdi  r11,r1,THREAD_SHIFT
        ld      r10,TI_FLAGS(r11)
        andi.   r11,r10,_TIF_SYSCALL_T_OR_A
        bne-    syscall_dotrace
syscall_dotrace_cont:
        cmpldi  0,r0,NR_syscalls
        bge-    syscall_enosys

system_call:                    /* label this so stack traces look sane */
/*
 * Need to vector to 32 Bit or default sys_call_table here,
 * based on caller's run-mode / personality.
 */
        ld      r11,.SYS_CALL_TABLE@toc(2)
        andi.   r10,r10,_TIF_32BIT
        beq     15f
        addi    r11,r11,8       /* use 32-bit syscall entries */
        clrldi  r3,r3,32
        clrldi  r4,r4,32
        clrldi  r5,r5,32
        clrldi  r6,r6,32
        clrldi  r7,r7,32
        clrldi  r8,r8,32
15:
        slwi    r0,r0,4
        ldx     r10,r11,r0      /* Fetch system call handler [ptr] */
        mtctr   r10
        bctrl                   /* Call handler */

syscall_exit:
        std     r3,RESULT(r1)
#ifdef SHOW_SYSCALLS
        bl      .do_show_syscall_exit
        ld      r3,RESULT(r1)
#endif
        clrrdi  r12,r1,THREAD_SHIFT

        /* disable interrupts so current_thread_info()->flags can't change,
           and so that we don't get interrupted after loading SRR0/1. */
        ld      r8,_MSR(r1)
        andi.   r10,r8,MSR_RI
        beq-    unrecov_restore
        mfmsr   r10
        rldicl  r10,r10,48,1
        rotldi  r10,r10,16
        mtmsrd  r10,1
        ld      r9,TI_FLAGS(r12)
        li      r11,-_LAST_ERRNO
        andi.   r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
        bne-    syscall_exit_work
        cmpld   r3,r11
        ld      r5,_CCR(r1)
        bge-    syscall_error
syscall_error_cont:
        ld      r7,_NIP(r1)
        stdcx.  r0,0,r1                 /* to clear the reservation */
        andi.   r6,r8,MSR_PR
        ld      r4,_LINK(r1)
        /*
         * Clear RI before restoring r13.  If we are returning to
         * userspace and we take an exception after restoring r13,
         * we end up corrupting the userspace r13 value.
         */
        li      r12,MSR_RI
        andc    r11,r10,r12
        mtmsrd  r11,1                   /* clear MSR.RI */
        beq-    1f
        ACCOUNT_CPU_USER_EXIT(r11, r12)
        ld      r13,GPR13(r1)   /* only restore r13 if returning to usermode */
1:      ld      r2,GPR2(r1)
        ld      r1,GPR1(r1)
        mtlr    r4
        mtcr    r5
        mtspr   SPRN_SRR0,r7
        mtspr   SPRN_SRR1,r8
        rfid
        b       .       /* prevent speculative execution */

syscall_error:  
        oris    r5,r5,0x1000    /* Set SO bit in CR */
        neg     r3,r3
        std     r5,_CCR(r1)
        b       syscall_error_cont
        
/* Traced system call support */
syscall_dotrace:
        bl      .save_nvgprs
        addi    r3,r1,STACK_FRAME_OVERHEAD
        bl      .do_syscall_trace_enter
        /*
         * Restore argument registers possibly just changed.
         * We use the return value of do_syscall_trace_enter
         * for the call number to look up in the table (r0).
         */
        mr      r0,r3
        ld      r3,GPR3(r1)
        ld      r4,GPR4(r1)
        ld      r5,GPR5(r1)
        ld      r6,GPR6(r1)
        ld      r7,GPR7(r1)
        ld      r8,GPR8(r1)
        addi    r9,r1,STACK_FRAME_OVERHEAD
        clrrdi  r10,r1,THREAD_SHIFT
        ld      r10,TI_FLAGS(r10)
        b       syscall_dotrace_cont

syscall_enosys:
        li      r3,-ENOSYS
        b       syscall_exit
        
syscall_exit_work:
        /* If TIF_RESTOREALL is set, don't scribble on either r3 or ccr.
         If TIF_NOERROR is set, just save r3 as it is. */

        andi.   r0,r9,_TIF_RESTOREALL
        beq+    0f
        REST_NVGPRS(r1)
        b       2f
0:      cmpld   r3,r11          /* r10 is -LAST_ERRNO */
        blt+    1f
        andi.   r0,r9,_TIF_NOERROR
        bne-    1f
        ld      r5,_CCR(r1)
        neg     r3,r3
        oris    r5,r5,0x1000    /* Set SO bit in CR */
        std     r5,_CCR(r1)
1:      std     r3,GPR3(r1)
2:      andi.   r0,r9,(_TIF_PERSYSCALL_MASK)
        beq     4f

        /* Clear per-syscall TIF flags if any are set.  */

        li      r11,_TIF_PERSYSCALL_MASK
        addi    r12,r12,TI_FLAGS
3:      ldarx   r10,0,r12
        andc    r10,r10,r11
        stdcx.  r10,0,r12
        bne-    3b
        subi    r12,r12,TI_FLAGS

4:      /* Anything else left to do? */
        andi.   r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
        beq     .ret_from_except_lite

        /* Re-enable interrupts */
        mfmsr   r10
        ori     r10,r10,MSR_EE
        mtmsrd  r10,1

        bl      .save_nvgprs
        addi    r3,r1,STACK_FRAME_OVERHEAD
        bl      .do_syscall_trace_leave
        b       .ret_from_except

/* Save non-volatile GPRs, if not already saved. */
_GLOBAL(save_nvgprs)
        ld      r11,_TRAP(r1)
        andi.   r0,r11,1
        beqlr-
        SAVE_NVGPRS(r1)
        clrrdi  r0,r11,1
        std     r0,_TRAP(r1)
        blr

        
/*
 * The sigsuspend and rt_sigsuspend system calls can call do_signal
 * and thus put the process into the stopped state where we might
 * want to examine its user state with ptrace.  Therefore we need
 * to save all the nonvolatile registers (r14 - r31) before calling
 * the C code.  Similarly, fork, vfork and clone need the full
 * register state on the stack so that it can be copied to the child.
 */

_GLOBAL(ppc_fork)
        bl      .save_nvgprs
        bl      .sys_fork
        b       syscall_exit

_GLOBAL(ppc_vfork)
        bl      .save_nvgprs
        bl      .sys_vfork
        b       syscall_exit

_GLOBAL(ppc_clone)
        bl      .save_nvgprs
        bl      .sys_clone
        b       syscall_exit

_GLOBAL(ppc32_swapcontext)
        bl      .save_nvgprs
        bl      .compat_sys_swapcontext
        b       syscall_exit

_GLOBAL(ppc64_swapcontext)
        bl      .save_nvgprs
        bl      .sys_swapcontext
        b       syscall_exit

_GLOBAL(ret_from_fork)
        bl      .schedule_tail
        REST_NVGPRS(r1)
        li      r3,0
        b       syscall_exit

/*
 * This routine switches between two different tasks.  The process
 * state of one is saved on its kernel stack.  Then the state
 * of the other is restored from its kernel stack.  The memory
 * management hardware is updated to the second process's state.
 * Finally, we can return to the second process, via ret_from_except.
 * On entry, r3 points to the THREAD for the current task, r4
 * points to the THREAD for the new task.
 *
 * Note: there are two ways to get to the "going out" portion
 * of this code; either by coming in via the entry (_switch)
 * or via "fork" which must set up an environment equivalent
 * to the "_switch" path.  If you change this you'll have to change
 * the fork code also.
 *
 * The code which creates the new task context is in 'copy_thread'
 * in arch/powerpc/kernel/process.c 
 */
        .align  7
_GLOBAL(_switch)
        mflr    r0
        std     r0,16(r1)
        stdu    r1,-SWITCH_FRAME_SIZE(r1)
        /* r3-r13 are caller saved -- Cort */
        SAVE_8GPRS(14, r1)
        SAVE_10GPRS(22, r1)
        mflr    r20             /* Return to switch caller */
        mfmsr   r22
        li      r0, MSR_FP
#ifdef CONFIG_VSX
BEGIN_FTR_SECTION
        oris    r0,r0,MSR_VSX@h /* Disable VSX */
END_FTR_SECTION_IFSET(CPU_FTR_VSX)
#endif /* CONFIG_VSX */
#ifdef CONFIG_ALTIVEC
BEGIN_FTR_SECTION
        oris    r0,r0,MSR_VEC@h /* Disable altivec */
        mfspr   r24,SPRN_VRSAVE /* save vrsave register value */
        std     r24,THREAD_VRSAVE(r3)
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif /* CONFIG_ALTIVEC */
        and.    r0,r0,r22
        beq+    1f
        andc    r22,r22,r0
        mtmsrd  r22
        isync
1:      std     r20,_NIP(r1)
        mfcr    r23
        std     r23,_CCR(r1)
        std     r1,KSP(r3)      /* Set old stack pointer */

#ifdef CONFIG_SMP
        /* We need a sync somewhere here to make sure that if the
         * previous task gets rescheduled on another CPU, it sees all
         * stores it has performed on this one.
         */
        sync
#endif /* CONFIG_SMP */

        addi    r6,r4,-THREAD   /* Convert THREAD to 'current' */
        std     r6,PACACURRENT(r13)     /* Set new 'current' */

        ld      r8,KSP(r4)      /* new stack pointer */
BEGIN_FTR_SECTION
  BEGIN_FTR_SECTION_NESTED(95)
        clrrdi  r6,r8,28        /* get its ESID */
        clrrdi  r9,r1,28        /* get current sp ESID */
  FTR_SECTION_ELSE_NESTED(95)
        clrrdi  r6,r8,40        /* get its 1T ESID */
        clrrdi  r9,r1,40        /* get current sp 1T ESID */
  ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_1T_SEGMENT, 95)
FTR_SECTION_ELSE
        b       2f
ALT_FTR_SECTION_END_IFSET(CPU_FTR_SLB)
        clrldi. r0,r6,2         /* is new ESID c00000000? */
        cmpd    cr1,r6,r9       /* or is new ESID the same as current ESID? */
        cror    eq,4*cr1+eq,eq
        beq     2f              /* if yes, don't slbie it */

        /* Bolt in the new stack SLB entry */
        ld      r7,KSP_VSID(r4) /* Get new stack's VSID */
        oris    r0,r6,(SLB_ESID_V)@h
        ori     r0,r0,(SLB_NUM_BOLTED-1)@l
BEGIN_FTR_SECTION
        li      r9,MMU_SEGSIZE_1T       /* insert B field */
        oris    r6,r6,(MMU_SEGSIZE_1T << SLBIE_SSIZE_SHIFT)@h
        rldimi  r7,r9,SLB_VSID_SSIZE_SHIFT,0
END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT)

        /* Update the last bolted SLB.  No write barriers are needed
         * here, provided we only update the current CPU's SLB shadow
         * buffer.
         */
        ld      r9,PACA_SLBSHADOWPTR(r13)
        li      r12,0
        std     r12,SLBSHADOW_STACKESID(r9) /* Clear ESID */
        std     r7,SLBSHADOW_STACKVSID(r9)  /* Save VSID */
        std     r0,SLBSHADOW_STACKESID(r9)  /* Save ESID */

        /* No need to check for CPU_FTR_NO_SLBIE_B here, since when
         * we have 1TB segments, the only CPUs known to have the errata
         * only support less than 1TB of system memory and we'll never
         * actually hit this code path.
         */

        slbie   r6
        slbie   r6              /* Workaround POWER5 < DD2.1 issue */
        slbmte  r7,r0
        isync

2:
        clrrdi  r7,r8,THREAD_SHIFT      /* base of new stack */
        /* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE
           because we don't need to leave the 288-byte ABI gap at the
           top of the kernel stack. */
        addi    r7,r7,THREAD_SIZE-SWITCH_FRAME_SIZE

        mr      r1,r8           /* start using new stack pointer */
        std     r7,PACAKSAVE(r13)

        ld      r6,_CCR(r1)
        mtcrf   0xFF,r6

#ifdef CONFIG_ALTIVEC
BEGIN_FTR_SECTION
        ld      r0,THREAD_VRSAVE(r4)
        mtspr   SPRN_VRSAVE,r0          /* if G4, restore VRSAVE reg */
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif /* CONFIG_ALTIVEC */

        /* r3-r13 are destroyed -- Cort */
        REST_8GPRS(14, r1)
        REST_10GPRS(22, r1)

        /* convert old thread to its task_struct for return value */
        addi    r3,r3,-THREAD
        ld      r7,_NIP(r1)     /* Return to _switch caller in new task */
        mtlr    r7
        addi    r1,r1,SWITCH_FRAME_SIZE
        blr

        .align  7
_GLOBAL(ret_from_except)
        ld      r11,_TRAP(r1)
        andi.   r0,r11,1
        bne     .ret_from_except_lite
        REST_NVGPRS(r1)

_GLOBAL(ret_from_except_lite)
        /*
         * Disable interrupts so that current_thread_info()->flags
         * can't change between when we test it and when we return
         * from the interrupt.
         */
        mfmsr   r10             /* Get current interrupt state */
        rldicl  r9,r10,48,1     /* clear MSR_EE */
        rotldi  r9,r9,16
        mtmsrd  r9,1            /* Update machine state */

#ifdef CONFIG_PREEMPT
        clrrdi  r9,r1,THREAD_SHIFT      /* current_thread_info() */
        li      r0,_TIF_NEED_RESCHED    /* bits to check */
        ld      r3,_MSR(r1)
        ld      r4,TI_FLAGS(r9)
        /* Move MSR_PR bit in r3 to _TIF_SIGPENDING position in r0 */
        rlwimi  r0,r3,32+TIF_SIGPENDING-MSR_PR_LG,_TIF_SIGPENDING
        and.    r0,r4,r0        /* check NEED_RESCHED and maybe SIGPENDING */
        bne     do_work

#else /* !CONFIG_PREEMPT */
        ld      r3,_MSR(r1)     /* Returning to user mode? */
        andi.   r3,r3,MSR_PR
        beq     restore         /* if not, just restore regs and return */

        /* Check current_thread_info()->flags */
        clrrdi  r9,r1,THREAD_SHIFT
        ld      r4,TI_FLAGS(r9)
        andi.   r0,r4,_TIF_USER_WORK_MASK
        bne     do_work
#endif

restore:
BEGIN_FW_FTR_SECTION
        ld      r5,SOFTE(r1)
FW_FTR_SECTION_ELSE
        b       iseries_check_pending_irqs
ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES)
2:
        TRACE_AND_RESTORE_IRQ(r5);

        /* extract EE bit and use it to restore paca->hard_enabled */
        ld      r3,_MSR(r1)
        rldicl  r4,r3,49,63             /* r0 = (r3 >> 15) & 1 */
        stb     r4,PACAHARDIRQEN(r13)

        ld      r4,_CTR(r1)
        ld      r0,_LINK(r1)
        mtctr   r4
        mtlr    r0
        ld      r4,_XER(r1)
        mtspr   SPRN_XER,r4

        REST_8GPRS(5, r1)

        andi.   r0,r3,MSR_RI
        beq-    unrecov_restore

        stdcx.  r0,0,r1         /* to clear the reservation */

        /*
         * Clear RI before restoring r13.  If we are returning to
         * userspace and we take an exception after restoring r13,
         * we end up corrupting the userspace r13 value.
         */
        mfmsr   r4
        andc    r4,r4,r0        /* r0 contains MSR_RI here */
        mtmsrd  r4,1

        /*
         * r13 is our per cpu area, only restore it if we are returning to
         * userspace
         */
        andi.   r0,r3,MSR_PR
        beq     1f
        ACCOUNT_CPU_USER_EXIT(r2, r4)
        REST_GPR(13, r1)
1:
        mtspr   SPRN_SRR1,r3

        ld      r2,_CCR(r1)
        mtcrf   0xFF,r2
        ld      r2,_NIP(r1)
        mtspr   SPRN_SRR0,r2

        ld      r0,GPR0(r1)
        ld      r2,GPR2(r1)
        ld      r3,GPR3(r1)
        ld      r4,GPR4(r1)
        ld      r1,GPR1(r1)

        rfid
        b       .       /* prevent speculative execution */

iseries_check_pending_irqs:
#ifdef CONFIG_PPC_ISERIES
        ld      r5,SOFTE(r1)
        cmpdi   0,r5,0
        beq     2b
        /* Check for pending interrupts (iSeries) */
        ld      r3,PACALPPACAPTR(r13)
        ld      r3,LPPACAANYINT(r3)
        cmpdi   r3,0
        beq+    2b                      /* skip do_IRQ if no interrupts */

        li      r3,0
        stb     r3,PACASOFTIRQEN(r13)   /* ensure we are soft-disabled */
#ifdef CONFIG_TRACE_IRQFLAGS
        bl      .trace_hardirqs_off
        mfmsr   r10
#endif
        ori     r10,r10,MSR_EE
        mtmsrd  r10                     /* hard-enable again */
        addi    r3,r1,STACK_FRAME_OVERHEAD
        bl      .do_IRQ
        b       .ret_from_except_lite           /* loop back and handle more */
#endif

do_work:
#ifdef CONFIG_PREEMPT
        andi.   r0,r3,MSR_PR    /* Returning to user mode? */
        bne     user_work
        /* Check that preempt_count() == 0 and interrupts are enabled */
        lwz     r8,TI_PREEMPT(r9)
        cmpwi   cr1,r8,0
        ld      r0,SOFTE(r1)
        cmpdi   r0,0
        crandc  eq,cr1*4+eq,eq
        bne     restore
        /* here we are preempting the current task */
1:
#ifdef CONFIG_TRACE_IRQFLAGS
        bl      .trace_hardirqs_on
        /* Note: we just clobbered r10 which used to contain the previous
         * MSR before the hard-disabling done by the caller of do_work.
         * We don't have that value anymore, but it doesn't matter as
         * we will hard-enable unconditionally, we can just reload the
         * current MSR into r10
         */
        mfmsr   r10
#endif /* CONFIG_TRACE_IRQFLAGS */
        li      r0,1
        stb     r0,PACASOFTIRQEN(r13)
        stb     r0,PACAHARDIRQEN(r13)
        ori     r10,r10,MSR_EE
        mtmsrd  r10,1           /* reenable interrupts */
        bl      .preempt_schedule
        mfmsr   r10
        clrrdi  r9,r1,THREAD_SHIFT
        rldicl  r10,r10,48,1    /* disable interrupts again */
        rotldi  r10,r10,16
        mtmsrd  r10,1
        ld      r4,TI_FLAGS(r9)
        andi.   r0,r4,_TIF_NEED_RESCHED
        bne     1b
        b       restore

user_work:
#endif
        /* Enable interrupts */
        ori     r10,r10,MSR_EE
        mtmsrd  r10,1

        andi.   r0,r4,_TIF_NEED_RESCHED
        beq     1f
        bl      .schedule
        b       .ret_from_except_lite

1:      bl      .save_nvgprs
        addi    r3,r1,STACK_FRAME_OVERHEAD
        bl      .do_signal
        b       .ret_from_except

unrecov_restore:
        addi    r3,r1,STACK_FRAME_OVERHEAD
        bl      .unrecoverable_exception
        b       unrecov_restore

#ifdef CONFIG_PPC_RTAS
/*
 * On CHRP, the Run-Time Abstraction Services (RTAS) have to be
 * called with the MMU off.
 *
 * In addition, we need to be in 32b mode, at least for now.
 * 
 * Note: r3 is an input parameter to rtas, so don't trash it...
 */
_GLOBAL(enter_rtas)
        mflr    r0
        std     r0,16(r1)
        stdu    r1,-RTAS_FRAME_SIZE(r1) /* Save SP and create stack space. */

        /* Because RTAS is running in 32b mode, it clobbers the high order half
         * of all registers that it saves.  We therefore save those registers
         * RTAS might touch to the stack.  (r0, r3-r13 are caller saved)
         */
        SAVE_GPR(2, r1)                 /* Save the TOC */
        SAVE_GPR(13, r1)                /* Save paca */
        SAVE_8GPRS(14, r1)              /* Save the non-volatiles */
        SAVE_10GPRS(22, r1)             /* ditto */

        mfcr    r4
        std     r4,_CCR(r1)
        mfctr   r5
        std     r5,_CTR(r1)
        mfspr   r6,SPRN_XER
        std     r6,_XER(r1)
        mfdar   r7
        std     r7,_DAR(r1)
        mfdsisr r8
        std     r8,_DSISR(r1)

        /* Temporary workaround to clear CR until RTAS can be modified to
         * ignore all bits.
         */
        li      r0,0
        mtcr    r0

#ifdef CONFIG_BUG       
        /* There is no way it is acceptable to get here with interrupts enabled,
         * check it with the asm equivalent of WARN_ON
         */
        lbz     r0,PACASOFTIRQEN(r13)
1:      tdnei   r0,0
        EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING
#endif
        
        /* Hard-disable interrupts */
        mfmsr   r6
        rldicl  r7,r6,48,1
        rotldi  r7,r7,16
        mtmsrd  r7,1

        /* Unfortunately, the stack pointer and the MSR are also clobbered,
         * so they are saved in the PACA which allows us to restore
         * our original state after RTAS returns.
         */
        std     r1,PACAR1(r13)
        std     r6,PACASAVEDMSR(r13)

        /* Setup our real return addr */        
        LOAD_REG_ADDR(r4,.rtas_return_loc)
        clrldi  r4,r4,2                 /* convert to realmode address */
        mtlr    r4

        li      r0,0
        ori     r0,r0,MSR_EE|MSR_SE|MSR_BE|MSR_RI
        andc    r0,r6,r0
        
        li      r9,1
        rldicr  r9,r9,MSR_SF_LG,(63-MSR_SF_LG)
        ori     r9,r9,MSR_IR|MSR_DR|MSR_FE0|MSR_FE1|MSR_FP
        andc    r6,r0,r9
        ori     r6,r6,MSR_RI
        sync                            /* disable interrupts so SRR0/1 */
        mtmsrd  r0                      /* don't get trashed */

        LOAD_REG_ADDR(r4, rtas)
        ld      r5,RTASENTRY(r4)        /* get the rtas->entry value */
        ld      r4,RTASBASE(r4)         /* get the rtas->base value */
        
        mtspr   SPRN_SRR0,r5
        mtspr   SPRN_SRR1,r6
        rfid
        b       .       /* prevent speculative execution */

_STATIC(rtas_return_loc)
        /* relocation is off at this point */
        mfspr   r4,SPRN_SPRG3           /* Get PACA */
        clrldi  r4,r4,2                 /* convert to realmode address */

        bcl     20,31,$+4
0:      mflr    r3
        ld      r3,(1f-0b)(r3)          /* get &.rtas_restore_regs */

        mfmsr   r6
        li      r0,MSR_RI
        andc    r6,r6,r0
        sync    
        mtmsrd  r6
        
        ld      r1,PACAR1(r4)           /* Restore our SP */
        ld      r4,PACASAVEDMSR(r4)     /* Restore our MSR */

        mtspr   SPRN_SRR0,r3
        mtspr   SPRN_SRR1,r4
        rfid
        b       .       /* prevent speculative execution */

        .align  3
1:      .llong  .rtas_restore_regs

_STATIC(rtas_restore_regs)
        /* relocation is on at this point */
        REST_GPR(2, r1)                 /* Restore the TOC */
        REST_GPR(13, r1)                /* Restore paca */
        REST_8GPRS(14, r1)              /* Restore the non-volatiles */
        REST_10GPRS(22, r1)             /* ditto */

        mfspr   r13,SPRN_SPRG3

        ld      r4,_CCR(r1)
        mtcr    r4
        ld      r5,_CTR(r1)
        mtctr   r5
        ld      r6,_XER(r1)
        mtspr   SPRN_XER,r6
        ld      r7,_DAR(r1)
        mtdar   r7
        ld      r8,_DSISR(r1)
        mtdsisr r8

        addi    r1,r1,RTAS_FRAME_SIZE   /* Unstack our frame */
        ld      r0,16(r1)               /* get return address */

        mtlr    r0
        blr                             /* return to caller */

#endif /* CONFIG_PPC_RTAS */

_GLOBAL(enter_prom)
        mflr    r0
        std     r0,16(r1)
        stdu    r1,-PROM_FRAME_SIZE(r1) /* Save SP and create stack space */

        /* Because PROM is running in 32b mode, it clobbers the high order half
         * of all registers that it saves.  We therefore save those registers
         * PROM might touch to the stack.  (r0, r3-r13 are caller saved)
         */
        SAVE_8GPRS(2, r1)
        SAVE_GPR(13, r1)
        SAVE_8GPRS(14, r1)
        SAVE_10GPRS(22, r1)
        mfcr    r4
        std     r4,_CCR(r1)
        mfctr   r5
        std     r5,_CTR(r1)
        mfspr   r6,SPRN_XER
        std     r6,_XER(r1)
        mfdar   r7
        std     r7,_DAR(r1)
        mfdsisr r8
        std     r8,_DSISR(r1)
        mfsrr0  r9
        std     r9,_SRR0(r1)
        mfsrr1  r10
        std     r10,_SRR1(r1)
        mfmsr   r11
        std     r11,_MSR(r1)

        /* Get the PROM entrypoint */
        ld      r0,GPR4(r1)
        mtlr    r0

        /* Switch MSR to 32 bits mode
         */
        mfmsr   r11
        li      r12,1
        rldicr  r12,r12,MSR_SF_LG,(63-MSR_SF_LG)
        andc    r11,r11,r12
        li      r12,1
        rldicr  r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG)
        andc    r11,r11,r12
        mtmsrd  r11
        isync

        /* Restore arguments & enter PROM here... */
        ld      r3,GPR3(r1)
        blrl

        /* Just make sure that r1 top 32 bits didn't get
         * corrupt by OF
         */
        rldicl  r1,r1,0,32

        /* Restore the MSR (back to 64 bits) */
        ld      r0,_MSR(r1)
        mtmsrd  r0
        isync

        /* Restore other registers */
        REST_GPR(2, r1)
        REST_GPR(13, r1)
        REST_8GPRS(14, r1)
        REST_10GPRS(22, r1)
        ld      r4,_CCR(r1)
        mtcr    r4
        ld      r5,_CTR(r1)
        mtctr   r5
        ld      r6,_XER(r1)
        mtspr   SPRN_XER,r6
        ld      r7,_DAR(r1)
        mtdar   r7
        ld      r8,_DSISR(r1)
        mtdsisr r8
        ld      r9,_SRR0(r1)
        mtsrr0  r9
        ld      r10,_SRR1(r1)
        mtsrr1  r10
        
        addi    r1,r1,PROM_FRAME_SIZE
        ld      r0,16(r1)
        mtlr    r0
        blr

#ifdef CONFIG_FUNCTION_TRACER
#ifdef CONFIG_DYNAMIC_FTRACE
_GLOBAL(mcount)
_GLOBAL(_mcount)
        /* Taken from output of objdump from lib64/glibc */
        mflr    r3
        stdu    r1, -112(r1)
        std     r3, 128(r1)
        subi    r3, r3, MCOUNT_INSN_SIZE
        .globl mcount_call
mcount_call:
        bl      ftrace_stub
        nop
        ld      r0, 128(r1)
        mtlr    r0
        addi    r1, r1, 112
        blr

_GLOBAL(ftrace_caller)
        /* Taken from output of objdump from lib64/glibc */
        mflr    r3
        ld      r11, 0(r1)
        stdu    r1, -112(r1)
        std     r3, 128(r1)
        ld      r4, 16(r11)
        subi    r3, r3, MCOUNT_INSN_SIZE
.globl ftrace_call
ftrace_call:
        bl      ftrace_stub
        nop
        ld      r0, 128(r1)
        mtlr    r0
        addi    r1, r1, 112
_GLOBAL(ftrace_stub)
        blr
#else
_GLOBAL(mcount)
        blr

_GLOBAL(_mcount)
        /* Taken from output of objdump from lib64/glibc */
        mflr    r3
        ld      r11, 0(r1)
        stdu    r1, -112(r1)
        std     r3, 128(r1)
        ld      r4, 16(r11)

        subi    r3, r3, MCOUNT_INSN_SIZE
        LOAD_REG_ADDR(r5,ftrace_trace_function)
        ld      r5,0(r5)
        ld      r5,0(r5)
        mtctr   r5
        bctrl

        nop
        ld      r0, 128(r1)
        mtlr    r0
        addi    r1, r1, 112
_GLOBAL(ftrace_stub)
        blr

#endif
#endif